Does anyone found that the devices, when it's turned off, doesn't turn on for clock alarm? Latest version of ArrowOs
[ROM] [11.0.0] ArrowOS POCO X3 [OFFICIAL][SURYA][UNIFIED]
- Thread starter ganesh varma
- Start date
I'm a noob, can you tell me if this is the right way to install ArrowOS with minimal gapps on a new X3 nfc? (haven't tried yet)
- unlock bootloader using https://en.miui.com/unlock/download_en.html
- get usb drivers from https://androidfilehost.com/?w=files&flid=322799
- install orangefox (why people recommend to use it instead of twrp?)
- flash A.11 european firmware (V12.0.7.0.RJGEUXM)
- flash latest ArrowOS
- flash nikgapps core
- wipe data in orangefox
- unlock bootloader using https://en.miui.com/unlock/download_en.html
- get usb drivers from https://androidfilehost.com/?w=files&flid=322799
- install orangefox (why people recommend to use it instead of twrp?)
- flash A.11 european firmware (V12.0.7.0.RJGEUXM)
- flash latest ArrowOS
- flash nikgapps core
- wipe data in orangefox
2021-05-10 is new oss version
2021-05-03 is miui version
Here are the instructions on how you should flash the new OSS Vendor ROM since most people here are confused:
- Flash latest TWRP by brigudav
- Flash Android 11 12.0.7 MIUI firmware
- Reboot recovery
- Format Data
- Reboot recovery
- Flash ArrowOS
OPTIONAL:
- Flash Magisk
- Flash Gapps (If you're on Vanilla build & If you want custom gapps)
- Reboot system
Download link:
- Firmware: https://xiaomifirmwareupdater.com/firmware/surya/stable/V12.0.7.0.RJGEUXM/
- TWRP: You can find it on 4pda but you need an account. I'm not allowed to share it, so you have to get it yourself.
This firmware is for NFC model as I'm not sure where is A11 firmware for non-NFC model. It can possibly work for non-NFC model, feel free to try.
- Flash latest TWRP by brigudav
- Flash Android 11 12.0.7 MIUI firmware
- Reboot recovery
- Format Data
- Reboot recovery
- Flash ArrowOS
OPTIONAL:
- Flash Magisk
- Flash Gapps (If you're on Vanilla build & If you want custom gapps)
- Reboot system
Download link:
- Firmware: https://xiaomifirmwareupdater.com/firmware/surya/stable/V12.0.7.0.RJGEUXM/
- TWRP: You can find it on 4pda but you need an account. I'm not allowed to share it, so you have to get it yourself.
This firmware is for NFC model as I'm not sure where is A11 firmware for non-NFC model. It can possibly work for non-NFC model, feel free to try.
Last edited:
@SkaboXD Interestingly the recommendation has always been to format data after flashing the ROM, because as it seems a ROM does not put anything into the data partition before first boot (may have to do with device encryption as well?). That's how I have done it so far, but I guess it should not matter if data is formated before or after flashing the ROM.
Thanks for the instructions. I'm going to use twrp then, I thought orangefox was recommended for updating arrowos.
Not since the latest TWRP seems to be the only one right now that can deal with A11+OSS device decryption.
It seems brigudav's files (including TWRP) are also available from androidfilehost. I only checked the latest twrp.img from there and it's the same file I had on my pc.
fix safetynet test fail :
+ install latest magisk
+ install magisk hide props config from magisk
+ extract printlist.zip in your internal memory
+ then run on terminal / adb shell :
- su
- props
- select 1 edit
- select f pick
- select 3 custom
- select POCO X3 NFC European
- select y yes
- select y reboot
- done
+ install latest magisk
+ install magisk hide props config from magisk
+ extract printlist.zip in your internal memory
+ then run on terminal / adb shell :
- su
- props
- select 1 edit
- select f pick
- select 3 custom
- select POCO X3 NFC European
- select y yes
- select y reboot
- done
Attachments
my banking app doesn't like magisk... that's why i never root my phones. i hope dev can fix the arrowos build
You're right -- I got it from there, flashed alright and got it working in my surya device. Latest version is 'twrp-3.5.2_10-1-surya.img', BTW.
its depend how to hiding magisk, all my bangking app working fine, use momohider 0.0.5 and riru
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
79
ArrowOS
ABOUT
ArrowOS is an AOSP/CAF based project started with the aim of keeping things simple, clean and neat.
Website: https://arrowos.net
Telegram: Channel | TG Portal/Links
Github: https://github.com/ArrowOS
Code Review: review.arrowos.net
E-mail: arrowos.contact
PayPal: Donate to us
Blog: blog.arrowos.net
Checkout more documentation at (maintainership/contributing): Check this out
WHAT WORKS?
- Almost everything
WHAT DOESN'T WORK?
- You tell me
DOWNLOADS
POCO X3 (NFC) (surya/karna)
Note: These are enforcing builds. Safety net checks pass out of the box! No need to flash magisk modules, which might in turn break the integrity!
Builds have been unified now under surya codename for both NFC and non-NFC variants
Tip: Select OEM -> Device,choose Arrow version, choose build type: "GAPPS" or "VANILLA" to download.
Latest Instructions for OSS builds (w.e.f 10/05/2021)
If migrating from pre OSS builds- Flash the latest available MIUI 11 firmware. (Flash global or any if you can't find your region)
- Download and copy arrow build to a OTG prendrive or sd card.
- Now flash Arrow Vanilla/Gapps build.
- FORMAT DATA. (You'll loose all your data!)
- Reboot.
Fresh install coming from MIUITWRP Recovery by @brigudav :- Flash latest available MIUI 11 if you aren't on it already.
- Install any suitable recovery (mentioned below).
- Download and copy arrow build to a OTG prendrive or sd card.
- Flash latest Arrow Vanilla/Gapps build.
- FORMAT DATA. (You'll loose all your data!)
- Reboot.
Note: This build of twrp will support decryption on ArrowOS OSS builds.
ArrowOS Recovery :
Note: This is a very basic aosp recovery only intended for OTA installs. Do NOT expect other functionalities.* Do not use with DFE or while unencrypted.F.A.Q :
1. My WiFi, bluetooth and network aren't working after updating to OSS build?
A. This happens if you're still on the old Q firmware. Flash the latest available R firmware and then follow the above give steps to properly flash the rom.
2. Unable to update OTA's using TWRP?
A. The current available recoveries are outdated and are no longer supported for OSS builds. To have a hassle free OTA experience use the above mentioned ArrowOS recovery.A. Two of the currently supported recoveries are mentioned above.
Read our blog article/post about:
* GAPPS and VANILLA variants
* Checking build integrity
ROM Source: https://github.com/ArrowOS
Kernel Source: https://github.com/ArrowOS-Devices/android_kernel_xiaomi_surya
XDA:DevDB Information
ArrowOS, ROM for the Xiaomi Poco X3 NFC
Contributors
ganesh varma, kubersharma, palaych
Source Code: https://github.com/ArrowOS
ROM OS Version: Android 11
ROM Kernel: Linux 4.x
ROM Firmware Required: Latest R firmware
Based On: AOSP, CAF
Version Information
Status: Stable
Stable Release Date: 2020-11-19
Created 2020-11-19
Last Updated 2021-05-181614So i haven't been around here for a while, after looking at the recent posts many seem to be confused, blaming and do not understand on migrating to OSS builds. In the final MIUI vendor builds the OTA functionality was blocked in order to prevent users from directly updating to OSS builds as it will be needing a MIUI 11 firmware followed by a clean flash. The same has been notified in our device changelogs. Every step and preventive measures have been taken, there's only much i can do from my side in clearing things up. We have this forum and community in place to help each other out, so lets not be pointing fingers here!
Here again i would like to make it clear with a simple guide on how to migrate onto OSS build!
Note: This update will require a CLEAN FLASH (format data), so please backup everything beforehand.
- Flash the latest available MIUI 11 firmware. (Region doesn't matter!!)
- Now flash Arrow Vanilla/Gapps build.
- FORMAT DATA. (You'll loose all your data!)
- Reboot.
13Here are the instructions on how you should flash the new OSS Vendor ROM since most people here are confused:
- Flash latest TWRP by brigudav
- Flash Android 11 12.0.7 MIUI firmware
- Reboot recovery
- Format Data
- Reboot recovery
- Flash ArrowOS
OPTIONAL:
- Flash Magisk
- Flash Gapps (If you're on Vanilla build & If you want custom gapps)
- Reboot system
Download link:
- Firmware: https://xiaomifirmwareupdater.com/firmware/surya/stable/V12.0.7.0.RJGEUXM/
- TWRP: You can find it on 4pda but you need an account. I'm not allowed to share it, so you have to get it yourself.
This firmware is for NFC model as I'm not sure where is A11 firmware for non-NFC model. It can possibly work for non-NFC model, feel free to try.10
To everyone, please STOP this misconception about having the need to flash magisk in order to pass safety net. Do read the OP I've clearly mentioned there's no need of a magisk or modules for safety net. Device is certified and passes safety net out of the box without need of any modifications.
By improper usage of magisk and mods you're further complicating and breaking things when they're completely unnecessary which end up causing unrelated issues which you end up calling them rom source bugs ¯\(◉‿◉)/¯
P.S : I'm not against magisk, but when you do prefer using modifications do ask yourself on your needs and if you're able to rectify the issues it might generate. Isolate yourself from magisk or any form of modifications to recheck and confirm the issue before making a bug report.
