[NIGHTLY] Cyanogenmod 6 (Froyo) for vendor Bravo (HTC DESIRE)

Status
Not open for further replies.
Search This thread

frocee

Senior Member
Sep 23, 2010
71
1
Notifications power widget always come back after reboot, even if the settings is "unchecked". I have to check and uncheck again to remove. any idea why?
 

StuMcBill

Senior Member
Feb 13, 2010
1,895
120
Just got another random reboot, I have attached my last_kmsg to see if this can help!

I have no idea what I am looking for so hopefully this means something to someone.

Code:
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.35.7-cyanogenmod ([email protected]) (gcc version 4.4.0 (GCC) ) #2 PREEMPT Mon Nov 1 01:37:16 UTC 2010
[    0.000000] CPU: ARMv7 Processor [510f00f2] revision 2 (ARMv7), cr=10c53c7f
[    0.000000] CPU: VIPT nonaliasing data cache, VIVT ASID tagged instruction cache
[    0.000000] Machine: bravo
[    0.000000] Ignoring unrecognised tag 0x4d534d71
[    0.000000] Ignoring unrecognised tag 0x4d534d72
[    0.000000] Ignoring unrecognised tag 0x4d534d73
[    0.000000] Ignoring unrecognised tag 0x4d534d75
[    0.000000] Ignoring unrecognised tag 0x4d534d76
[    0.000000] Ignoring unrecognised tag 0x5441000a
[    0.000000] CAM_AWB_CAL Data size = 514 , 0x59504550, size = 2048
[    0.000000] Ignoring unrecognised tag 0x41387898
[    0.000000] Ignoring unrecognised tag 0x5441001c
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 105362
[    0.000000] Kernel command line: board_bravo.disable_uart3=0 board_bravo.usb_h2w_sw=0 board_bravo.disable_sdcard=0 diag.enabled=0 board_bravo.debug_uart=0 smisize=0 userdata_sel=0 androidboot.emmc=false  androidboot.baseband=5.11.05.14 androidboot.cid=HTC__001 androidboot.carrier=HTC-WWE androidboot.mid=PB9920000 androidboot.keycaps=qwerty androidboot.mode=normal androidboot.serialno=HT049PL06929 androidboot.bootloader=0.93.0001 no_console_suspend=1 msmsdcc_sdioirq=1 wire.search_count=5
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 232MB 183MB = 415MB total
[    0.000000] Memory: 415916k/415916k available, 9044k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     DMA     : 0xffa00000 - 0xffe00000   (   4 MB)
[    0.000000]     vmalloc : 0xdb800000 - 0xf8000000   ( 456 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdb700000   ( 439 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .init : 0xc0008000 - 0xc0023000   ( 108 kB)
[    0.000000]       .text : 0xc0023000 - 0xc03fc000   (3940 kB)
[    0.000000]       .data : 0xc041a000 - 0xc044a580   ( 194 kB)
[    0.000000] NR_IRQS:332
[    0.000000] Calibrating delay loop... 509.54 BogoMIPS (lpj=2547712)
[    0.229461] pid_max: default: 32768 minimum: 301
[    0.229675] Mount-cache hash table entries: 512
[    0.229980] Initializing cgroup subsys cpuacct
[    0.230010] CPU: Testing write buffer coherency: ok
[    0.231445] regulator: core version 0.5
[    0.231597] NET: Registered protocol family 16
[    0.231964] bravo_init() revision=129
[   14.104125] ram_console: got buffer at 3a00000, size 40000
[   14.104248] ram_console: found existing buffer, size 33455, start 33455
[   14.259063] console [ram0] enabled
[   14.259857] bravo_init_mmc()+
[   14.260070] bravo_init_mmc()-
[   14.262878] bio: create slab <bio-0> at 0
[   14.263549] msm_i2c_probe
[   14.263824] msm_i2c_probe: clk_ctl 35d, 100000 Hz
[   17.233459] msm_i2c msm_i2c.0: Error waiting for notbusy (0)
[   17.233673] msm_i2c msm_i2c.0: Transaction timed out
[   17.233795] msm_i2c msm_i2c.0: Error during data xfer 48 (-110)
[   17.234100] msm_i2c msm_i2c.0: Still the bus master, status a700, intf 0
[   17.234222] msm_i2c msm_i2c.0: i2c_scl: 1, i2c_sda: 1
[   17.234558] msm_i2c msm_i2c.0: Bus busy cleared after 1 clock cycles, status d0, intf 300
[   17.234832] tps65023 0-0048: Read from reg 0x6 failed
[   17.234954] regulator: dcdc1: 975 <--> 1275 mV 
[   17.235168] regulator: dcdc2: 1260 mV 
[   17.235443] regulator: dcdc3: 800 <--> 3300 mV at 1800 mV 
[   20.207305] msm_i2c msm_i2c.0: Error waiting for notbusy (0)
[   20.207519] msm_i2c msm_i2c.0: Transaction timed out
[   20.207641] msm_i2c msm_i2c.0: Error during data xfer 48 (-110)
[   20.207946] msm_i2c msm_i2c.0: Still the bus master, status a700, intf 0
[   20.208099] msm_i2c msm_i2c.0: i2c_scl: 0, i2c_sda: 0
[   20.208404] msm_i2c msm_i2c.0: Bus busy cleared after 1 clock cycles, status d0, intf 300
[   20.208587] tps65023 0-0048: Read from reg 0x8 failed
[   20.208801] regulator: ldo1: 1000 <--> 3150 mV 
[   20.209014] regulator: ldo2: 3300 mV 
[   20.209808] Bluetooth: Core ver 2.15
[   20.209991] NET: Registered protocol family 31
[   20.210113] Bluetooth: HCI device and connection manager initialized
[   20.210327] Bluetooth: HCI socket layer initialized
[   20.210540] Switching to clocksource gp_timer
[   20.211486] NET: Registered protocol family 2
[   20.211730] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[   20.212249] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[   20.212677] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[   20.213043] TCP: Hash tables configured (established 16384 bind 16384)
[   20.213165] TCP reno registered
[   20.213409] UDP hash table entries: 256 (order: 0, 4096 bytes)
[   20.213531] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[   20.213897] NET: Registered protocol family 1
[   20.214172] Unpacking initramfs...
[   20.225524] Freeing initrd memory: 160K
[   20.226348] smd_init()
[   20.226470] smd_core_init()
[   20.226623] smd_core_init() done
[   20.226867] msm_init_last_radio_log: last radio log is 40000 bytes long
[   20.227264] smd_alloc_channel() cid=00 size=08192 'SMD_DS'
[   20.227569] smd_alloc_channel() cid=01 size=08192 'SMD_DIAG'
[   20.227752] smd_alloc_channel() cid=02 size=08192 'SMD_RPCCALL'
[   20.228027] smd_alloc_channel() cid=07 size=32768 'SMD_DATA1'
[   20.228179] smd_alloc_channel() cid=08 size=08192 'SMD_DATA2'
[   20.228454] smd_alloc_channel() cid=09 size=08192 'SMD_DATA3'
[   20.228637] smd_alloc_channel() cid=11 size=32768 'SMD_DATA5'
[   20.228912] smd_alloc_channel() cid=12 size=32768 'SMD_DATA6'
[   20.229064] smd_alloc_channel() cid=13 size=32768 'SMD_DATA7'
[   20.229339] smd_alloc_channel() cid=15 size=08192 'SMD_DATA9'
[   20.229522] smd_alloc_channel() cid=27 size=08192 'SMD_GPSNMEA'
[   20.229797] smd_alloc_channel() cid=40 size=08192 'DSP_DIAG'
[   20.229949] smd_alloc_channel() cid 41 does not exist
[   20.230194] smd_alloc_channel() cid=42 size=08192 'DSP_DAL_AQ_VID'
[   20.230346] smd_alloc_channel() cid=43 size=08192 'DSP_DAL_AQ_AUD'
[   20.230651] smd_alloc_channel() cid=46 size=08192 'DSP_DAL00'
[   20.231384] SMD: ch 2 1 -> 2
[   20.233032] mdp_probe: initialized
[   20.233306] spi: SPI_CONFIG=8f
[   20.233428] spi: SPI_IO_CONTROL=401
[   20.233551] spi: SPI_OPERATIONAL=85
[   20.233764] spi: SPI_ERROR_FLAGS_EN=7f
[   20.233886] spi: SPI_ERROR_FLAGS=7f
[   20.234008] -bravo_init_spi_hack()
[   20.234283] bravo_init_panel: amoled panel
[   20.234527] Registered led device: lcd-backlight
[   20.236206] smd_alloc_channel() cid 47 does not exist
[   20.236480] smd_alloc_channel() cid=48 size=08192 'SMD_DAL_AM_AUD'
[   20.236694] smd_alloc_channel() cid=49 size=08192 'SMD_DAL00'
[   20.236999] smd_alloc_channel() cid=50 size=08192 'SMD_DATA5_CNTL'
[   20.237182] smd_alloc_channel() cid=51 size=08192 'SMD_DATA6_CNTL'
[   20.237487] smd_alloc_channel() cid=52 size=08192 'SMD_DATA7_CNTL'
[   20.238708] bravo-microp 0-0066: microp version [03][1D]
[   20.239044] Registered led device: green
[   20.239227] Registered led device: amber
[   20.239501] Registered led device: blue
[   20.239685] Registered led device: button-backlight
[   20.243591] microp_spi_vote_enable: Changing SPI [1]
[   20.251220] acpuclk_set_vdd_level got regulator
[   20.270996] tpa2018d1_init
[   20.272460] smd_alloc_channel() cid 41 does not exist
[   20.272888] smd_alloc_channel() cid 47 does not exist
[   20.274169] H2W: htc_35mm_jack driver register
[   20.275177] input: h2w headset as /devices/virtual/input/input0
[   20.278961] Registered led device: flashlight
[   20.279388] flashlight_probe: The Flashlight Driver is ready
[   20.291107] ashmem: initialized
[   20.292694] yaffs built Nov  1 2010 01:30:43 Installing. 
[   20.295959] alg: No test for stdrng (krng)
[   20.296142] io scheduler noop registered
[   20.296325] io scheduler deadline registered
[   20.296508] io scheduler cfq registered
[   20.296630] io scheduler bfq registered (default)
[   20.297424] samsung_oled_panel_init: +()
[   20.297790] samsung_oled_panel_init: -()
[   20.298217] msmfb_probe() installing 480 x 800 panel
[   20.298553] mdp_lcdc_probe: initialized
[   20.298767] kgsl kgsl: |kgsl_platform_probe| no grp_pclk, continuing
[   20.299499] msm_serial: driver initialized
[   20.299804] msm_serial_hs.0: ttyHS0 at MMIO 0xa0200000 (irq = 44) is a MSM HS UART
[   20.300170] msm_serial_hs module loaded
[   20.301849] loop: module loaded
[   20.301971] pmem: 1 init
[   20.302764] pmem_adsp: 1 init
[   20.303588] pmem_venc: 1 init
[   20.303985] AKM8973 compass driver: init
[   20.305236] input: compass as /devices/virtual/input/input1
[   20.305877] msm_nand: allocated dma buffer at ffa01000, dma_addr 3b1b8000
[   20.306182] msm_nand: read CFG0 = aa5400c0 CFG1 = 6746e
[   20.306274] msm_nand: CFG0 cw/page=3 ud_sz=512 ecc_sz=10 spare_sz=4
[   20.306549] msm_nand: NAND_READ_ID = 5500bcec
[   20.306762] msn_nand: nandid 5500bcec status c03120
[   20.306884] msm_nand: manuf Samsung (0xec) device 0xbc blocksz 20000 pagesz 800 size 20000000
[   20.307098] msm_nand: save CFG0 = e85408c0 CFG1 = 4745e
[   20.307281] msm_nand: CFG0: cw/page=3 ud_sz=516 ecc_sz=10 spare_sz=0 num_addr_cycles=5
[   20.307464] msm_nand: DEV_CMD1: f00f3000
[   20.307708] msm_nand: NAND_EBI2_ECC_BUF_CFG: 1ff
[   20.307800] Creating 6 MTD partitions on "msm_nand":
[   20.308013] 0x00001ff60000-0x000020000000 : "misc"
[   20.309265] 0x000004240000-0x0000046c0000 : "recovery"
[   20.314208] 0x0000046c0000-0x0000049c0000 : "boot"
[   20.317779] 0x0000049c0000-0x00000dac0000 : "system"
[   20.478973] 0x00000dac0000-0x0000139c0000 : "cache"
[   20.591949] 0x0000139c0000-0x00001ff60000 : "userdata"
[   20.825897] PPP generic driver version 2.4.2
[   20.826568] PPP Deflate Compression module registered
[   20.826812] PPP BSD Compression module registered
[   20.828155] PPP MPPE Compression module registered
[   20.828552] NET: Registered protocol family 24
[   20.830383] tun: Universal TUN/TAP device driver, 1.6
[   20.830810] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[   20.832885] msm72k_udc: msm72k_probe
[   20.833160] msm72k_udc: msm72k_probe() io=db860000, irq=58, dma=ffa02000(3b1f3000)
[   20.834014] android init
[   20.834289] android_probe pdata: c0421f78
[   20.834808] android_bind
[   20.835021] android_bind_config
[   20.835357] android_usb gadget: android_usb ready
[   20.835754] msm72k_udc: msm72k_udc: registered gadget driver 'android_usb'
[   20.836090] f_adb init
[   20.836334] android_register_function adb
[   20.836730] f_mass_storage init
[   20.836944] android_register_function usb_mass_storage
[   20.837371] f_rndis init
[   20.837738] android_register_function rndis
[   20.837982] rndis_function_bind_config MAC: 02:2A:21:00:02:00
[   20.838409] android_usb gadget: using random self ethernet address
[   20.838653] android_usb gadget: using random host ethernet address
[   20.839569] usb0: MAC 2a:a4:12:02:e7:b9
[   20.839813] usb0: HOST MAC 5e:50:3a:4c:7f:cb
[   20.840179] mass_storage_bind_config
[   20.840728] fsg_probe pdata: c0423204
[   20.841339] msm72k_udc: IDLE -> ONLINE
[   20.841735] hsusb: reset controller
[   20.842254] android_usb gadget: Number of LUNs=1
[   20.842498] adb_bind_config
[   20.843719] bravo_ts_power: power 1
[   20.901519] msm_hsusb_phy_reset: success
[   20.991760] msm_i2c msm_i2c.0: error, status 83c8
[   20.992156] msm_i2c msm_i2c.0: Error during data xfer 40 (-5)
[   20.992797] i2c_smbus_write_byte_data failed
[   20.993835] synaptics_ts_probe: Product Major Version 1
[   20.995147] synaptics_ts_probe: Product Minor Version 1
[   20.996185] synaptics_ts_probe: product property 2
[   20.997467] synaptics_ts_probe: device control 81
[   20.998504] synaptics_ts_probe: interrupt enable 1
[   21.000762] synaptics_ts_probe: 0xe0: 1 1 1 2 1 1 0 0
[   21.002471] synaptics_ts_probe: Sensor properties 701
[   21.006134] synaptics_ts_probe: max_x 4024, max_y 6604
[   21.006744] synaptics_ts_probe: inactive_x -8 -8, inactive_y -41 -41
[   21.007110] synaptics_ts_probe: snap_x 0-0 0-0, snap_y 0-0 0-0
[   21.008209] input: synaptics-rmi-touchscreen as /devices/virtual/input/input2
[   21.009643] synaptics_ts_probe: Start touchscreen synaptics-rmi-touchscreen in interrupt mode
[   21.010192] capella_cm3602_probe: probe
[   21.011230] input: proximity as /devices/virtual/input/input3
[   21.012115] capella_cm3602_setup
[   21.013427] GPIO Matrix Keypad Driver: Start keypad matrix for bravo-keypad in interrupt mode
[   21.014221] GPIO Input Driver: Start gpio inputs for bravo-keypad in interrupt mode
[   21.015411] input: bravo-keypad as /devices/virtual/input/input4
[   21.017181] input: lightsensor-level as /devices/virtual/input/input5
[   21.018280] set_ls_kvalue: ALS calibrated als_kadc=0x6da5004c
[   21.018615] set_ls_kvalue: als_kadc=0x4c, als_gadc=0xc0
[   21.019256] ls_table: data[0] , data[0] = 0, 0
[   21.019592] ls_table: data[1] , data[1] = 0, 0
[   21.020233] gpio_keys_scan_keys: key 1-74, 0 (94) changed to 0
[   21.020599] ls_table: data[2] , data[2] = 0, 5
[   21.021209] ls_table: data[3] , data[3] = 0, b
[   21.021545] ls_table: data[4] , data[4] = 0, 17
[   21.021942] ls_table: data[5] , data[5] = 0, 72
[   21.022552] ls_table: data[6] , data[6] = 0, 9e
[   21.022918] ls_table: data[7] , data[7] = 1, 14
[   21.023529] ls_table: data[8] , data[8] = 1, 54
[   21.023864] ls_table: data[9] , data[9] = 3, ff
[   21.025238] proximity FAR
[   21.028594] __capella_cm3602_power: Turn the capella_cm3602 power on
[   21.029296] using input dev h2w headset for key reset
[   21.029968] using input dev bravo-keypad for key reset
[   21.031219] input: curcial-oj as /devices/virtual/input/input6
[   21.032226] using input dev curcial-oj for key reset
[   21.034545] curcial_oj_poweron: OJ power enable(1)
[   21.046783] microp_oj_interrupt_mode: microp_interrupt_enable called
[   21.047393] microp_spi_vote_enable: Changing OJ interrupt mode [1]
[   21.050170] microp_spi_vote_enable: already in voted state, [spi_device 4,enable 1], [spi_status 1, spi_devices_vote 5]
[   21.051910] curcial_oj_shutdown
[   21.088623] OpticalJoystick Device ID: 0d
[   21.091766] OJ Driver: Revision : 02
[   21.092926] usb: notify offline
[   21.093139] msm_hsusb: enable pullup
[   21.093261] msm72k_udc: ONLINE -> OFFLINE
[   21.093383] msm_hsusb: disable pullup
[   21.093627] ### notify_usb_connected(0) ###
[   21.093750] usb: notify offline
[   21.095367] OJ: driver loaded
[   21.096099] using rtc device, msm_rtc, for alarms
[   21.096221] rs30000048:00010000 rs30000048:00010000: rtc core: registered msm_rtc as rtc0
[   21.097106] s5k3e2fx_sensor_probe
[   21.131774] msm_hsusb_phy_reset: success
[   21.746063] Driver for 1-wire Dallas network protocol.
[   21.748107] msm_i2c msm_i2c.0: error, status 63c8
[   21.748474] msm_i2c msm_i2c.0: Error during data xfer 18 (-5)
[   21.749114] ds2482 0-0018: i2c write c3 87 failed, -5, retries left 5
[   21.749816] msm_i2c msm_i2c.0: error, status 63c8
[   21.750457] msm_i2c msm_i2c.0: Error during data xfer 18 (-5)
[   21.750823] ds2482 0-0018: i2c write c3 87 failed, -5, retries left 4
[   21.751800] msm_i2c msm_i2c.0: error, status 63c8
[   21.752166] msm_i2c msm_i2c.0: Error during data xfer 18 (-5)
[   21.752899] ds2482 0-0018: i2c write c3 87 failed, -5, retries left 3
[   21.753570] msm_i2c msm_i2c.0: error, status 63c8
[   21.754241] msm_i2c msm_i2c.0: Error during data xfer 18 (-5)
[   21.754638] ds2482 0-0018: i2c write c3 87 failed, -5, retries left 2
[   21.755584] msm_i2c msm_i2c.0: error, status 63c8
[   21.755981] msm_i2c msm_i2c.0: Error during data xfer 18 (-5)
[   21.756622] ds2482 0-0018: i2c write c3 87 failed, -5, retries left 1
[   21.757324] msm_i2c msm_i2c.0: error, status 63c8
[   21.757965] msm_i2c msm_i2c.0: Error during data xfer 18 (-5)
[   21.758331] ds2482 0-0018: i2c write c3 87 failed, -5, retries left 0
[   21.760681] device-mapper: uevent: version 1.0.3
[   21.761779] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: [email protected]
[   21.763000] Bluetooth: HCI UART driver ver 2.2
[   21.763336] Bluetooth: HCI H4 protocol initialized
[   21.763946] Bluetooth: HCILL protocol initialized
[   21.766235] mmc0: Qualcomm MSM SDCC at 0x00000000a0300000 irq 24,0 dma 8
[   21.766845] mmc0: 4 bit data mode enabled
[   21.767211] mmc0: MMC clock 144000 -> 49152000 Hz, PCLK 64000000 Hz
[   21.767822] mmc0: Slot eject status = 1
[   21.768157] mmc0: Power save feature enable = 1
[   21.768493] mmc0: DM non-cached buffer at ffa04000, dma_addr 0x3b182000
[   21.769104] mmc0: DM cmd busaddr 0x3b182000, cmdptr busaddr 0x3b182300
[   21.770660] mmc1: Qualcomm MSM SDCC at 0x00000000a0400000 irq 26,0 dma 8
[   21.771026] mmc1: 4 bit data mode enabled
[   21.771636] mmc1: MMC clock 144000 -> 49152000 Hz, PCLK 64000000 Hz
[   21.771972] mmc1: Slot eject status = 0
[   21.772369] mmc1: Power save feature enable = 1
[   21.772979] mmc1: DM non-cached buffer at ffa05000, dma_addr 0x3b183000
[   21.773345] mmc1: DM cmd busaddr 0x3b183000, cmdptr busaddr 0x3b183300
[   21.775939] logger: created 64K log 'log_main'
[   21.776489] logger: created 256K log 'log_events'
[   21.777313] logger: created 64K log 'log_radio'
[   21.777832] logger: created 64K log 'log_system'
[   21.779052] GACT probability NOT on
[   21.779418] Mirror/redirect action on
[   21.779754] u32 classifier
[   21.780090]     Actions configured
[   21.780700] Netfilter messages via NETLINK v0.30.
[   21.781158] nf_conntrack version 0.5.0 (6501 buckets, 26004 max)
[   21.782226] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[   21.782653] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[   21.783264] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[   21.784149] ctnetlink v0.93: registering with nfnetlink.
[   21.784790] xt_time: kernel timezone is -0000
[   21.785522] ip_tables: (C) 2000-2006 Netfilter Core Team
[   21.786376] arp_tables: (C) 2002 David S. Miller
[   21.786865] TCP cubic registered
[   21.787506] NET: Registered protocol family 17
[   21.787872] NET: Registered protocol family 15
[   21.788391] Bridge firewalling registered
[   21.789459] Bluetooth: L2CAP ver 2.14
[   21.789825] Bluetooth: L2CAP socket layer initialized
[   21.790191] Bluetooth: SCO (Voice Link) ver 0.6
[   21.790802] Bluetooth: SCO socket layer initialized
[   21.791412] Bluetooth: RFCOMM TTY layer initialized
[   21.792083] Bluetooth: RFCOMM socket layer initialized
[   21.792480] Bluetooth: RFCOMM ver 1.11
[   21.793121] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   21.793457] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[   21.794219] ThumbEE CPU extension supported.
[   21.795227] clock_late_init() disabled 22 unused clocks
[   21.797454] bravo_wifi_init: start
[   21.798645] VFP support v0.3: implementor 51 architecture 0 part 0f variant 0 rev 1
[   21.802185] regulator_init_complete: incomplete constraints, leaving ldo2 on
[   21.803405] regulator_init_complete: incomplete constraints, leaving ldo1 on
[   21.804595] regulator_init_complete: incomplete constraints, leaving dcdc3 on
[   21.805694] regulator_init_complete: incomplete constraints, leaving dcdc2 on
[   21.806884] regulator_init_complete: incomplete constraints, leaving dcdc1 on
[   21.808380] rs30000048:00010000 rs30000048:00010000: setting system clock to 2010-11-01 13:12:06 UTC (1288617126)
[   21.808685] Warning: unable to open an initial console.
[   21.808898] Freeing init memory: 108K
[   21.848815] keychord: using input dev h2w headset for fevent
[   21.849029] keychord: using input dev bravo-keypad for fevent
[   21.849151] keychord: using input dev curcial-oj for fevent
[   21.850769] yaffs: dev is 32505859 name is "mtdblock3" rw
[   21.850891] yaffs: passed flags ""
[   21.851013] yaffs: Attempting MTD mount of 31.3,"mtdblock3"
[   21.972381] yaffs: restored from checkpoint
[   21.973297] yaffs_read_super: isCheckpointed 1
[   21.991333] mmc1: host does not support reading read-only switch. assuming write-enable.
[   21.991516] mmc1: new high speed SDHC card at address aaaa
[   21.992156] mmcblk0: mmc1:aaaa SU08G 7.60 GiB 
[   21.992645]  mmcblk0: p1 p2
[   22.003417] yaffs: dev is 32505861 name is "mtdblock5" rw
[   22.003662] yaffs: passed flags ""
[   22.003875] yaffs: Attempting MTD mount of 31.5,"mtdblock5"
[   22.103332] yaffs: restored from checkpoint
[   22.105133] yaffs_read_super: isCheckpointed 1
[   22.182525] yaffs: dev is 32505860 name is "mtdblock4" rw
[   22.182830] yaffs: passed flags ""
[   22.183074] yaffs: Attempting MTD mount of 31.4,"mtdblock4"
[   22.231903] yaffs: restored from checkpoint
[   22.232452] yaffs_read_super: isCheckpointed 1
[   22.362396] batt:  82%, 3957 mV, -444 mA (-317 avg), 29.1 C, 1121 mAh
[   22.369720] batt: charging OFF
[   22.702880] NET: Registered protocol family 10
[   22.703582] lo: Disabled Privacy Extensions
[   32.312561] EXT4-fs (mmcblk0p2): warning: maximal mount count reached, running e2fsck is recommended
[   32.315277] EXT4-fs (mmcblk0p2): recovery complete
[   32.315612] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[   32.448028] init: exec: pid 69 exited with return code 244: Unknown error: 193747
[   32.448242] init: service 'console' requires console
[   32.469696] init: untracked pid 206 exited
[   32.471588] enabling adb
[   32.472076] adb_open
[   32.506134] init: untracked pid 222 exited
[   32.506286] init: untracked pid 223 exited
[   32.824707] save exit: isCheckpointed 1
[   32.834472] warning: `rild' uses 32-bit capabilities (legacy support in use)
[   32.872222] init: untracked pid 69 exited
[   32.956604] SMD: ch 0 1 -> 2
[   32.958496] qmi: smd closed
[   32.958923] SMD: ch 50 1 -> 2
[   32.959167] qmi: smd opened
[   32.959442] qmi: smd closed
[   32.959655] SMD: ch 51 1 -> 2
[   32.960052] qmi: smd opened
[   32.960327] qmi: smd closed
[   32.960540] SMD: ch 52 1 -> 2
[   32.960784] qmi: smd opened
[   32.961975] qmi: ctl: wds use client_id 0x01
[   32.962280] qmi: ctl: wds use client_id 0x01
[   32.962524] qmi: ctl: wds use client_id 0x01
[   33.835235] htc-acoustic: open
[   33.836364] smd_alloc_channel() cid 41 does not exist
[   33.836578] smd_alloc_channel() cid 47 does not exist
[   33.837127] htc-acoustic: release
[   33.865661] audio: init: codecs
[   33.866058] SMD: ch 43 1 -> 2
[   33.978729] dal_attach: status = 0, name = 'DAL_AQ_AUD'
[   33.979125] audio: init: INIT
[   33.979736] audio: init: OPEN control
[   34.367156] audio: init: attach ACDB
[   34.367736] SMD: ch 48 1 -> 2
[   34.475463] dal_attach: status = 0, name = 'DAL_AM_AUD'
[   34.476135] audio: init: attach ADIE
[   34.477752] dal_attach: status = 0, name = 'DAL_AM_AUD'
[   52.510162] lcdc_unblank: ()
[   52.510375] samsung_oled_panel_unblank: +()
[   52.662994] msm_kgsl: initilized dev=1 mmu=on
[   52.670166] init: untracked pid 294 exited
[   52.675476] init: untracked pid 295 exited
[   52.793182] samsung_oled_panel_unblank: -()
[   72.558288] batt:  82%, 3967 mV, -235 mA (-305 avg), 29.3 C, 1116 mAh
[  123.051269] batt:  82%, 3967 mV, -236 mA (-229 avg), 29.8 C, 1113 mAh
[  167.141510] wifi_set_power = 1
[  167.141510] bravo_wifi_power: 1
[  167.726013] wifi_set_carddetect = 1
[  167.726013] bravo_wifi_set_carddetect: 1
[  167.726013] mmc0: card_present 1
[  167.726043] mmc0: Slot status change detected (0 -> 1)
[  167.726196] 
[  167.726196] Dongle Host Driver, version 4.218.248.10
[  167.816772] mmc0: queuing unknown CIS tuple 0x91 (3 bytes)
[  167.817016] mmc0: new high speed SDIO card at address 0001
[  167.819396] DHD: dongle ram size is set to 294912(orig 294912)
[  167.859741] capella_cm3602_open
[  167.859893] capella_cm3602_ioctl cmd 2
[  167.860015] capella_cm3602_disable
[  167.860198] capella_cm3602_disable: already disabled
[  167.860321] capella_cm3602_ioctl cmd 1
[  167.860443] lightsensor_ioctl set value = 1
[  167.860626] lightsensor_enable
[  167.865753] microp_write_interrupt: microp_interrupt_enable called
[  167.865936] lightsensor_ioctl get enabled status: 1
[  167.873077] request_suspend_state: wakeup (3->0) at 153878210987 (2010-11-01 13:14:32.411128049 UTC)
[  168.134552] capella_cm3602_ioctl cmd 1
[  168.134674] lightsensor_ioctl get enabled status: 1
[  168.155578] microp_spi_vote_enable: already in voted state, [spi_device 1,enable 1], [spi_status 1, spi_devices_vote 5]
[  168.262115] ALS value: 0x23, level: 4 #
[  168.419219] wifi_get_mac_addr
[  168.426025] Firmware version = wl0: May 17 2010 22:38:50 version 4.218.223.1
[  168.626647] eth0: Broadcom Dongle Host Driver mac=00:23:76:fc:66:a2
[  172.017700] STA connect received 1
[  173.168609] batt:  82%, 3952 mV, -329 mA (-229 avg), 30.1 C, 1110 mAh
[  178.865631] eth0: no IPv6 routers present
[  179.132324] ALS value: 0x1E, level: 3 #
[  180.153747] ALS value: 0x1E, level: 3 #
[  181.183319] ALS value: 0x1B, level: 3 #
[  182.198181] ALS value: 0x1E, level: 3 #
[  183.220153] ALS value: 0x1E, level: 3 #
[  184.248016] ALS value: 0x1E, level: 3 #
[  186.287139] ALS value: 0x1E, level: 3 #
[  187.317657] ALS value: 0x1E, level: 3 #
[  188.338317] ALS value: 0x23, level: 4 #
[  189.364990] ALS value: 0x23, level: 4 #
[  193.444396] ALS value: 0x16, level: 3 #
[  198.574981] ALS value: 0x1E, level: 3 #
[  199.589233] ALS value: 0x1B, level: 3 #
[  200.596252] ALS value: 0x1E, level: 3 #
[  201.078125] ROAMING did not succeeded, keep status Quo
[  202.652984] ALS value: 0x1E, level: 3 #
[  203.684814] ALS value: 0x1B, level: 3 #
[  206.720214] ALS value: 0x1E, level: 3 #
[  208.768585] ALS value: 0x1E, level: 3 #
[  209.443481] ROAMING did not succeeded, keep status Quo
[  210.816864] ALS value: 0x1B, level: 3 #
[  211.824340] ALS value: 0x1E, level: 3 #
[  212.846832] ALS value: 0x1B, level: 3 #
[  213.868255] ALS value: 0x1E, level: 3 #
[  215.913299] ALS value: 0x1E, level: 3 #
[  217.808868] wds: 0020 @ 01
[  217.809234] qmi: wds: got handle 0x022713e0
[  217.809875] wds: 0022 @ ff
[  217.810211] qmi: wds: CONNECTED
[  217.811187] wds: 002d @ 01
[  217.811523] qmi: got network profile
[  217.812683] rmnet_open()
[  217.813110] SMD: ch 11 1 -> 2
[  217.954650] ALS value: 0x1E, level: 3 #
[  218.368041] wds: 0021 @ 01
[  218.368438] qmi: wds: network stopped
[  218.368804] wds: 0022 @ ff
[  218.369140] qmi: wds: DISCONNECTED
[  218.369934] rmnet_stop()
[  219.118804] ROAMING did not succeeded, keep status Quo
[  222.041198] ALS value: 0x1B, level: 3 #
[  223.062774] ALS value: 0x23, level: 4 #
[  223.271667] batt:  81%, 3967 mV, -353 mA (-357 avg), 30.6 C, 1105 mAh
[  227.893554] sudden key ignore 
[  235.328796] ALS value: 0x1E, level: 3 #
[  237.375030] ALS value: 0x1B, level: 3 #
[  238.392578] ALS value: 0x1B, level: 3 #
[  239.416442] ALS value: 0x1B, level: 3 #
[  241.491912] ALS value: 0x1E, level: 3 #
[  242.484008] ALS value: 0x1E, level: 3 #
[  244.528320] ALS value: 0x1E, level: 3 #
[  247.606536] ALS value: 0x1B, level: 3 #
[  254.584655] binder: release proc 1253, transaction 18241, not freed
[  273.468475] batt:  81%, 3957 mV, -365 mA (-290 avg), 30.7 C, 1102 mAh
[  312.147796] save exit: isCheckpointed 1
[  312.574493] save exit: isCheckpointed 1
[  312.754577] save exit: isCheckpointed 1
[  322.321990] save exit: isCheckpointed 1
[  323.617309] batt:  80%, 3967 mV, -250 mA (-269 avg), 30.8 C, 1097 mAh
[  323.868255] save exit: isCheckpointed 1
[  323.911163] Restarting system.
[  323.911163] 
[  323.911163] Restarting Linux version 2.6.35.7-cyanogenmod ([email protected]) (gcc version 4.4.0 (GCC) ) #2 PREEMPT Mon Nov 1 01:37:16 UTC 2010
[  323.911193] 
[  323.990753] msm_restart: Console was locked!

No errors detected
 

fenderf4i

Senior Member
Aug 24, 2010
116
3
Calgary
The only times I've had issues with freezing or reboots was due to certain apps I had installed. I removed them, and no more issues. It's not always the OS that's the problem.
 

mad-murdock

Retired Recognized Developer
Oct 11, 2010
2,373
1,670
Detmold
Forgot to mention, I have N1 HBOOT, so my Cache partition is 95Mb, I have 10Mb free at the moment.

Would I be better running it from Data?

Same setup here. Cache is 98 mb, containing dalvik. But my random reboot is different. My log says kernel bug... Null pointer... Reboot in 5 seconds.

Sent from my S-OFF'd brain using teh internetz
 

mad-murdock

Retired Recognized Developer
Oct 11, 2010
2,373
1,670
Detmold
sure, with a2sd the better solution is to use data for cache
98MB /cache after rom and gapps have only 52MB

what do u think to close this topic and open a new one, the OP do not same to be update the first post

Yes, do it. As far as I see, you are the only active cyanogen dev on this thread. So the fist post should be yours, to update the topic and put important informations there

Sent from my S-OFF'd brain using teh internetz
 
Status
Not open for further replies.

Top Liked Posts

  • There are no posts matching your filters.
  • 1
    @Kali: I took your odex-script and modified it to run automatically on flash.
    (again unsigned. My signed zip files don't pass the signature verification, don't know what the problem is.)
    I hope it's no problem ;)
    1
    Flashed the cklickon kernel on cm6 final. OJ already died after like 20 min.


    this is one of the reason to not share info on how to reproduce the bug, use your phone as usual


    was using my phone as usual


    Edit: light sensor doesn't seem to work either now.