• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

Nike SSPL, USPL and HardSPL

Search This thread

jockyw2001

Inactive Recognized Developer
May 17, 2007
1,708
75
The attached SSPL, USPL and HardSPL are based on the Nike shipped SPL v1.16
EDIT: HardSPL v.1.15 (MFG - manufacturing) with rtask support now added. I highly recommend to install this version !!!

1. download the attached files
2. REMOVE SIM and SD CARDS !!
3. connect usb cable
4. copy sspl-1.16-nike.exe to your device and run it (usb cable must be connected!)
5. after a few seconds "USB" appears on the display
6. unplug and replug the usb cable
(OPTIONAL, better to skip it! step 7. if you only want to test the sspl try flashing the attached splash screen by running ROMUpdateUtility.exe from flash-splash-niki)
8. you can now flash the hardspl-1.15mfg-nike.nbh by running ROMUpdateUtility.exe from flash-uspl-niki
9. after installing the hardspl you can flash any rom (rom cook project here)

Note:
The USPL is not a "HardSPL" which means it gets overwritten when you flash a full ROM. You have to run the SSPL if you want to flash any ROM again.
The HardSPL is never overwritten which in case of flashing trouble is a great insurance. Should you want to flash another SPL or USPL you must run the SSPL.


NEW HardSPL 1.22 LINK BELOW

http://forum.xda-developers.com/showpost.php?p=2786065&postcount=439

Important:
Use at your own risk! I'm not responsible for any damage to your device caused by using the attached files.

Credits:
Pof, Des, Olipro and thanks to arc for testing this.

Donations:
Any donation amount is greatly appreciated :)
 

Attachments

  • sspl-1.16-nike.zip
    102 KB · Views: 60,301
  • uspl-1.16-nike.zip
    96.8 KB · Views: 25,585
  • Splash.zip
    4.9 KB · Views: 17,632
  • flash-splash-niki.zip
    627.9 KB · Views: 26,956
  • flash-uspl-niki.zip
    719.7 KB · Views: 38,264
  • hardspl-1.16-nike.zip
    96.8 KB · Views: 27,580
  • flash-hardspl-niki.zip
    719.8 KB · Views: 38,874
  • hardspl-1.15mfg-nike.zip
    101.1 KB · Views: 41,193
Last edited by a moderator:
  • Like
Reactions: [email protected]

Pawel062

Senior Member
Dec 29, 2006
1,631
1
i would watch this spl guys. the previous didnt work. olipro and cmonex before the holidays tried to make a hardspl and have problems and couldnt get it done with midget bc of usb problems. might of been his device though so i could be wrong but just a wise word of warning to all.
 

jockyw2001

Inactive Recognized Developer
May 17, 2007
1,708
75
olipro and cmonex before the holidays tried to make a hardspl and have problems and couldnt get it done with midget bc of usb problems. might of been his device though so i could be wrong but just a wise word of warning to all.
Very wise words Pawel062, thanks for contributing them.
But not to worry, this SSPL works fine. I solved the usb issue.
 

jockyw2001

Inactive Recognized Developer
May 17, 2007
1,708
75
Yes, that's what I wrote
Thanks to arc for testing this.

Here is his MTTY output:
Code:
Cmd>task 32
No card inserted
Level = 0

Cmd>

Cmd>info a
HTCS3566100xxxxxxxxxæ®HTCE

Cmd>
Cmd>info 8 
--- 2K bytes sector version --- 
DEVICE NAME=samsung_k9k2g08
DEVICE ID=0xAA
DEVICE MAKER ID=0xEC
PAGE SIZE=0x800
TOTAL PAGE SIZE=0x840
BLOCK COUNT=0x800
BLOCK PAGE=0x40 

Checking block information 

BLOCK 0 (0x0) is reversed block
BLOCK 1 (0x1) is reversed block
BLOCK 2 (0x2) is reversed block
BLOCK 10 (0xA) is reversed block
BLOCK 11 (0xB) is reversed block
BLOCK 13 (0xD) is reversed block
BLOCK 14 (0xE) is reversed block
Partition[0], type=0x20, start=0x2, total=0x63E
Partition[1], type=0x23, start=0x640, total=0x700
Partition[2], type=0x25, start=0xD40, total=0x9F80
Partition[3], type=0x4, start=0xACC0, total=0x10600 

CE Total Length(with sector info) = 0x56B6600
CE CheckSum Length(without sector info) = 0x5660000 

Cmd>info 7 
HTC Integrated Re-Flash Utility, Common Base Version : 1.51d
Device Name: Nike, Bootloader Version : 1.16.Jump
Built at: Oct 8 2007 18:27:27
Copyright (c) 1998-2007 High Tech Computer Corporation 

Board ID=0x3
CPLD ID=0x4
gCurrentPanel=0x4
 

dshiff

Member
Dec 12, 2007
5
0
Hi guys, I'm sure there are thousands of posts with clear instructions for a newbie (like me) on how to flash the uspl (.nbh) file. To my eternal shame and after trying to search the the various forums, I'm still badly in need of some explanation (or a least a hint regarding what to search for) on how the flash the uspl file... Suggestions are most welcome.
Thanks in advance.
 

jockyw2001

Inactive Recognized Developer
May 17, 2007
1,708
75
Hi guys, I'm sure there are thousands of posts with clear instructions for a newbie (like me) on how to flash the uspl (.nbh) file. To my eternal shame and after trying to search the the various forums, I'm still badly in need of some explanation (or a least a hint regarding what to search for) on how the flash the uspl file... Suggestions are most welcome.
Thanks in advance.
In my first post I have added the flash applications to flash uspl and splash.
 

ahmad.yousry

Senior Member
Dec 5, 2007
133
0
Cairo
WORKS LIKE A CHARM !!!!

you're AMAZING man :)

followed the simple steps and flashed the WWE asia rom instead of the damn swedish rom i had and voila :D

man i feel like i was blind and now i can SEE :)

am tooooooooooooo DAMN happy ... you made my year man
 

Huples

New member
May 24, 2006
2
0
48
Prague
The attached SSPL and USPL are based on the Nike shipped SPL v1.16

- download the attached files
- REMOVE SIM and SD CARDS !!
- connect usb cable
- copy sspl-1.16-nike.exe to your device and run it
- after a few seconds "USB" appears on the display
- unplug and replug the usb cable
- if you only want to test the sspl try flashing the attached splash screen by running ROMUpdateUtility.exe from flash-splash-niki
- you can now flash the uspl-1.16-nike.nbh by running ROMUpdateUtility.exe from flash-uspl-niki
- after installing the uspl you can flash any rom (rom cook project here)

Note:
The USPL is not a "hardSPL" which means it gets overwritten when you flash a full ROM.
You have to run the SSPL if you want to flash again.

Important:
Use at your own risk! I'm not responsible for any damage to your device caused by using the attached files.

Thanks to arc for testing this.

Great work man, this solution I needed!! My HTC-5500 (Niki) with italian ROM is now in English! Any "Invalid Vender ID", many thanks for your work! I am now first in my country, who did it!
 

Top Liked Posts

  • There are no posts matching your filters.
  • 4
    Hi buddy, let's see if I can help you ;)

    A lot of people get confused about all the attachements on the first post of this thread, so I'm gonna try to make it a bit easier:

    1. download the attached files and extract them from the zip file.
    - sspl-1.16-nike.exe
    - HardSPL 1.22

    2. REMOVE SIM and SD CARDS !!

    3. Turn your device on.

    4. connect usb cable and connect with Active Sync.

    5. copy sspl-1.16-nike.exe to your device and run it (usb cable must be connected!)
    - You have to run it on your device by tapping on it.
    - Your device will now jump into the bootloader (4 coloured screen)

    5. after a few seconds "USB" appears on the display (4 coloured screen)

    6. unplug (wait 10 seconds) and replug the usb cable (4 coloured screen)

    7. you can now flash the Hardspl-1.22 by running Nike CustomRUU.exe from flash-uspl-niki

    8. Now you can flash every rom you want :D

    (When flashing a WM 6.5 rom, you're radio must be 1.65 or above)
    1
    The attached SSPL, USPL and HardSPL are based on the Nike shipped SPL v1.16
    EDIT: HardSPL v.1.15 (MFG - manufacturing) with rtask support now added. I highly recommend to install this version !!!

    1. download the attached files
    2. REMOVE SIM and SD CARDS !!
    3. connect usb cable
    4. copy sspl-1.16-nike.exe to your device and run it (usb cable must be connected!)
    5. after a few seconds "USB" appears on the display
    6. unplug and replug the usb cable
    (OPTIONAL, better to skip it! step 7. if you only want to test the sspl try flashing the attached splash screen by running ROMUpdateUtility.exe from flash-splash-niki)
    8. you can now flash the hardspl-1.15mfg-nike.nbh by running ROMUpdateUtility.exe from flash-uspl-niki
    9. after installing the hardspl you can flash any rom (rom cook project here)

    Note:
    The USPL is not a "HardSPL" which means it gets overwritten when you flash a full ROM. You have to run the SSPL if you want to flash any ROM again.
    The HardSPL is never overwritten which in case of flashing trouble is a great insurance. Should you want to flash another SPL or USPL you must run the SSPL.


    NEW HardSPL 1.22 LINK BELOW

    http://forum.xda-developers.com/showpost.php?p=2786065&postcount=439

    Important:
    Use at your own risk! I'm not responsible for any damage to your device caused by using the attached files.

    Credits:
    Pof, Des, Olipro and thanks to arc for testing this.

    Donations:
    Any donation amount is greatly appreciated :)
    1
    Nike 1.22 shipped Hardspl

    Hey guys,

    Thanks for verifying the hardspl works for you guys too.

    I have removed the experimental parts from the filename and I think this hardspl could be put on the first post of this thread if it helps people.

    I was wondering if people who use the 1.22 hardspl could post saying if they feel the 1.22 spl has changed the performance of their nike in anyway (for better or for worse).

    I am also looking at how wifi works in the spl and eventually in the radio.

    Is the niki wifi team still active? Could any of you give me any pointers to prevent any duplicated work.

    I know from comparing the nike spl to other MSM7200 spl's that the code used to load wifi firmware is missing in the nike spl. I'm going to work on porting the wifi loading code into the niki 1.22 spl. I guess the wifi still needs to be enabled in the Radio and the OS will need wifi drivers. I don't even know if there is any wifi firmware at 0x50100000 on niki devices.
    1
    sorry stupid question :eek:



    when i run it the screen goes black and connection to the device is lost after a sew sec but nothing else. Dont see any messages...

    i am very very new to HTC, i got a french version and want to change it to English.

    please help!!!

    Welcome hairbrush4,

    I have 2 questions for you,

    1. Can you confirm that you're phone is a niki100, you can see that under your battery.
    2. If yes, did you removed your sim and sd-card.

    Just let me know.


    Greetz,
    1
    thanks

    1. it thought so but may be i am wrong.
    its says:
    HTC Touch Dual P5310
    NEON 400

    2. its cdma phone so no sim and no sd.

    HI hairbrush4, you have to read THIS and you'll found all information for your phone this thread is for another phone, they both look the same but they are different, that is why it isn't working.

    Greetz,