• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[NOBLE ROM 1.6 OneUI 3.1.1 FULL PORT][10/21 Patches][26/10/2021][SM-N960F/FD/N--SM-G96xF/FD/N]

Search This thread

Dixybot

Member
May 22, 2021
13
3
I have read 10-15 articles and YouTube that all state several solutions... almost all referring to first get the phone in bootloader mode by pressing buttons - none of witch currently seems to work on my phone (i´ve even been trying my own combos) OR with access to the system. Without this working/available to me - I cannot find any new advice on how to start the bootloader at the moment, that is why I ask for you gurus advice. :)
You do this with odin when you connect your phone to laptop or PC turn your phone off then reboot holding top volume key bixpy and power button then install latest bootloader with odin....hope this helps
 

Fragin 11

Senior Member
Jun 8, 2015
174
100
Szczecin
LG G3
Lenovo Yoga Tab 2
I have read 10-15 articles and YouTube that all state several solutions... almost all referring to first get the phone in bootloader mode by pressing buttons - none of witch currently seems to work on my phone (i´ve even been trying my own combos) OR with access to the system. Without this working/available to me - I cannot find any new advice on how to start the bootloader at the moment, that is why I ask for you gurus advice. :)
I had this problem as well, the solution is to flash the ROM twice (so one more time), the hard part is getting into TWRP once in a bootloop. You need to keep pressing Bixby + Volume Up + Power and after a couple attempts it should get you to the TWRP screen.
 

nööb

Member
Aug 4, 2015
6
1
Gothenburg
I had this problem as well, the solution is to flash the ROM twice (so one more time), the hard part is getting into TWRP once in a bootloop. You need to keep pressing Bixby + Volume Up + Power and after a couple attempts it should get you to the TWRP screen.
YES!!! :) It seems like I was timing it wrong! After testing my timing several times after it started - I finally got into TWRP again and after a new flash I finally got through to the system setup! All seem to be working as it should - now to install and setup all apps!
Thank you and kudos! (y)
 
  • Like
Reactions: Fragin 11

bahaeddin

Member
Nov 19, 2011
26
9
Samsung Galaxy Note 9
Hello,
Loving the rom, i have been playing around with it since yesterday.
Quick question though, can i change what the bixby button does without reflashing the rom? Also can i change the boot animation for example as well without reflashing the whole thing?

Thanks again.
 

jays note 2

Senior Member
Mar 10, 2015
230
75
42
Silverdale, Auckland, New Zealand
Hello,
Loving the rom, i have been playing around with it since yesterday.
Quick question though, can i change what the bixby button does without reflashing the rom? Also can i change the boot animation for example as well without reflashing the whole thing?

Thanks again.
Yeah you can change what the bixby button does. just do a search in advanved settings just type it in the search bar it's called side keys.
If you want too change the boot animation...let me know I've got some on hand and already changed my bootup and shut down animations.
The process is simple, but I'm currently @ work so can't do a write up on how too do so.
 

jays note 2

Senior Member
Mar 10, 2015
230
75
42
Silverdale, Auckland, New Zealand
Yeah you can change what the bixby button does. just do a search in advanved settings just type it in the search bar it's called side keys.
If you want too change the boot animation...let me know I've got some on hand and already changed my bootup and shut down animations.
The process is simple, but I'm currently @ work so can't do a write up on how too do so.
And you dont have to reflash for the process to take hold. You will need a file explorer with root permissions in order to change.
 

bahaeddin

Member
Nov 19, 2011
26
9
Samsung Galaxy Note 9
i am thinking to get an 2nd hand note 9. Which exynos variant should i get to have the least issue installing NOBLE rom?

Yeah you can change what the bixby button does. just do a search in advanved settings just type it in the search bar it's called side keys.
If you want too change the boot animation...let me know I've got some on hand and already changed my bootup and shut down animations.
The process is simple, but I'm currently @ work so can't do a write up on how too do so.
Thanks for the Sponse, the side key actually changes the power button, not the dedicated bixby button ( sine that doesn't exist in note 10+)
So what i want to change is what shows up in the dialogue when i flash the rom.
Hope i could explain myself.
Thanks again for the amazing work
 

bahaeddin

Member
Nov 19, 2011
26
9
Samsung Galaxy Note 9
And you dont have to reflash for the process to take hold. You will need a file explorer with root permissions in order to change.
I got this method that I will follow

but regarding the bixby button (under the volume buttons in note 9) I am still not sure how to change it without reflashing. will keep digging, otherwise I will have to dirty flash the rom and see if that works.

Thanks again
 

Hardstylez92

Member
Feb 9, 2014
18
0
Samsung Galaxy S9+
Someone suggested that you flash your phone twice as soon as you reboot go straight back in twrp and flash again worth a try
this and my only phone i will not try to reinstall this rom for the moment, i installed the rom from twrp several times in a row without rebooting.
now with the original firmware I have problems because some things are not better like the smart pass, health,secure folder
 

Dixybot

Member
May 22, 2021
13
3
this and my only phone i will not try to reinstall this rom for the moment, i installed the rom from twrp several times in a row without rebooting.
now with the original firmware I have problems because some things are not better like the smart pass, health,secure folder
I understand there is other roms out there if you want to give them a try some phones are tricky enough I use a s9 plus and its been flawless with flashing best of luck
 

Top Liked Posts

  • 1
    Sure, I know about tripping it, that's not my first to-be-rooted Note, and I know about SafetyNet.

    I'm interested specifically in Samsung features that would break with Knox. Dex still working is great news, thanks.
    All Samsung apps work with the exception of Spay, Sheath should work if not hide from root.
  • 5
    NOBLE ROM 1.6 IS ONLINE!
    Hope you will enjoy! Clean install is really recommended!

    CHANGELOG:
    Updated base to N10+ OneUI 3.1.1 base with October's patches (FUI7)
    Updated kernels and CSC
    Fixed Photo Editor FC
    Fixed VoLTE issue
    Fixed OK Google
    Improved Bluetooth performance
    Improved Fingerprint performance
    Improved Performance and RAM Management
    Added an AROMA option to choose between FIXED AOD or OneUI 4 AOD

    Added some Apps from OneUI 4 BETA:
    Gallery
    Keyboard and Emoji's
    Calendar
    Clock
    Digital Wellbeing
    Smart Manager
    Messages
    Game Launcher
    Weather
    Edge Panels

    Updated YT Vanced Manager
    Updated iOS Emoji's
    Updated Patched Good Lock
    Updated SafetyNet FIX

    HOW TO INSTALL:
    Follow these steps carefully! CLEAN INSTALL is always RECOMMENDED!

    TWRP 3.3.1.1
    1. Open TWRP by pressing volume up+ bixby + power buttons
    2. Go in WIPE menu' and press ADVANCED WIPE
    3. Then select: system, vendor, data, cache, dalvik and SWIPE TO WIPE
    4. Go back in TWRP menu' and press INSTALL
    5. Then select NOBLE ROM zip and SWIPE TO CONFIRM FLASH
    6. Follow AROMA instruction (FOR STARTERS: select NO DEBLOAT option)
    7. REBOOT
    8. FINISH FIRST SETUP
    9. THEN IF YOU WANT OneUI 2.5 CAMERA:
    REBOOT TO TWRP
    FLASH OneUI 2.5 Camera zip and REBOOT
    10. Enjoy Noble ROM

    TWRP 3.5.x.x
    1. Open TWRP by pressing volume up+ bixby + power buttons
    2. Go in WIPE menu' and press ADVANCED WIPE
    3. Then select: system, vendor, data, cache, dalvik and SWIPE TO WIPE
    4. Go back in TWRP menu' and press INSTALL
    5. Then select NOBLE ROM zip and SWIPE TO CONFIRM FLASH
    6. Follow AROMA instruction (FOR STARTERS: select NO DEBLOAT option)
    7. If you try to reboot you will see 'NO OS INSTALLED' warning
    8. Go back WITHOUT REBOOTING and FLASH THE ROM AGAIN
    9. Then REBOOT
    10. FINISH FIRST SETUP
    11. THEN IF YOU WANT OneUI 2.5 CAMERA:
    REBOOT TO TWRP
    FLASH OneUI 2.5 Camera zip and REBOOT
    12. Enjoy Noble ROM

    More and graphic infos here: https://www.instagram.com/p/CM_3lWHsvUW/

    IMPORTANT NOTES:
    1. As stated above, TWRP 3.3.1.0/1 is really recommended
    2. SM-G960N, SM-G965N and SM-N960N HAVE TO INSTALL the ROM zip with "ONLY_N_VARIANT" title
    3. Also CLEAN FLASH IS RECOMMENDED
    4. Don't update AOD apk from GALAXY STORE or you will get again "AOD CHARGING BUG"
    5. OneUI 3.1 Camera is now included by default but it has some bugs like FRONT SINGLE TAKE and LIVE FOCUS.
    You can install OneUI 2.5 Camera with all functions working AFTER FIRST SETUP.

    DOWNLOAD LINK:
    NOBLE ROM 1.6: https://www.androidfilehost.com/?fid=7161016148664829078

    NOBLE ROM 1.6 FOR G960N, G965N, N960N: https://www.androidfilehost.com/?fid=7161016148664829081

    ONEUI 2.5 CAMERA: https://www.androidfilehost.com/?fid=7161016148664829077

    TELEGRAM GROUP:


    TELEGRAM CHANNEL:

    FOLLOW ME ON MY NEW INSTAGRAM's PROFILE: https://www.instagram.com/invites/contact/?i=wehmn6h8vftx&utm_content=ibotzda

    Follow me on Facebook: https://www.facebook.com/AlexisDevXDA/
    2
    Now READ CAREFULLY!

    When you prepare your backups, DON'T BACKUP CAMERA APP or CAMERA SETTINGS or ALL APP's SETTINGS. Don't do this or you will have some problems with camera and you may need a clean install.

    About camera.
    Well, OneUI 3.1 Camera is included by default, but it has some bugs like: Front Single Take and Live Focus (Portrait Mode).

    You are free to keep it or to choose OneUI 2.5 Camera WHICH IS MORE STABLE.

    HOW TO INSTALL OneUI 2.5 Camera?
    Simple. After you flashed the ROM and completed first setup, reboot to TWRP and flash OneUI2.5_Camera zip

    IS CLEAN INSTALL RECOMMENDED?
    OF COURSE!!! YES!!! Dirty flash is really not recommended for this update!

    WHICH TWRP SHOULD i USE?
    These.

    S9: https://eu.dl.twrp.me/starlte/twrp-3.3.1-1-starlte.img.tar.html

    S9 PLUS: https://eu.dl.twrp.me/star2lte/twrp-3.3.1-1-star2lte.img.tar.html

    NOTE9: https://eu.dl.twrp.me/crownlte/twrp-3.3.1-0-crownlte.img.tar.html


    SUMMARY
    1. Use TWRP 3.3.1.0/1
    2. Don't backup Camera App, Camera Settings and Settings of All Apps
    3. Flash the ROM following AROMA instructions as always
    4. Reboot
    5. Complete the setup
    6. Flash OneUI 2.5 Camera
    7. Reboot and enjoy
    2
    Any help with reassigning the bixby button is appreciated.
    Do it in aroma installer...
    When you flash the rom... it say how to use Bixby button... if I'm not mistaken
    2
    No screen is fine.
    Update: I tricked it started updating another application and put Chrome in queue after the first app finished Chrome started downloading too and it's now done :)
    Thanks everyone for helping.
    And now second question: is there a Rom Tool type thing to advance tweak stuff like having smaller notification bars, clock on right side and virtual button on status bar etc?
    2
    Galaxystore setting not work
    AOD so old version
    Touchwiz launcher also old
    Photo editor updated automatic because galaxy store cannot setting update setting

    This rom need 2 year
    This is a ported ROM. And you can't expect everything to work properly.
    If you think it need 2 year, you can use stock ROM or you can buy a new phone. Developer worked in diffuculties and port this ROM and you must respect that.
    I use this ROM since 1.0. It's works fine like a new phone. Alexis is having a hard time. He will update this ROM in future, and fix bugs. We must wait some times.
    Best regards
  • 83
    alex.png


    This project has been possible thanks to the precious and very very hard work of @ridwan.sn and @bulldog74ts.

    DISCLAIMER

    We will be aware of your problems caused by root like tripped knox... When you flash something like this you may know about the risks you are going to find in!

    Always backup your phone before and after flashing TWRP custom recovery:
    In TWRP press BACKUP and select:
    System Image, Vendor Image, Boot Image, Data, Baseband and EFS
    and save your backup in your Internal Storage.

    DESCRIPTION

    SM-N96xF/FD supported.
    Based on official OneUI 3.1.1 N10+ (FUI7) with October's Security Patches.
    All OneUI 3.1 functions have been ported, only camera is from OneUI 2.5.
    Odexed, Hardly Debloated and added some tweaks for best performance and better battery.
    Added some tweaks in order to have the best smoothness and general performance!
    Make your ROM! OUR aroma allows you to select everything you want to have on your phone in order to improve the user experience!
    Remappable Bixby Button
    Disabled RMM Lock.
    Google Pay working (Hide it with Magisk)
    Secure Folder working
    S21 Wallpapers
    Some OneUI 4 Apps Ported
    Useful Cards section enabled in Messages Apps
    Improved zoom quality in gallery
    Useful cards tab enabled in messages
    Night mode zoom on camera.
    Night mode on hyperlapse.
    Enabled Dolby on Game.
    Power key in notification panel.
    Samsung App Lock.
    iOS 14 Emoji's selectable in aroma.
    And much more, don't worry if the rom size is big, it contains all you need ;).

    AROMA INSTALLER

    1.png
    2.png
    3.png
    7.png
    8.png
    9.png
    4.png
    5.png
    6.png

    KNOWN BUGS

    1. Live Focus and Selective Focus (just for S9 G960 users)
    2. Usb Settings Menu will be shown as blanked
    3. Sometimes Gallery link in camera is greyed but IF YOU PRESS IT, IT WORKS NORMALLY
    4. Dual App may cause rebooting bootloop (we should have fixed with last update but just be careful, make a backup before enabling it)

    IMPORTANT NOTES

    1. For STARTERS is important to select NO DEBLOAT option, in order to prevent issues with the ADVANCED DEBLOAT
    2. Is RECOMMENDED to use TWRP 3.3.1.1 with this build. DON'T COMPLAIN about this, I will get it fully working for newer TWRP as soon as I have enough time.
    3. Backup your phone before installing!
    4. Update your MODEM AND BOOTLOADER BEFORE INSTALLING THIS ROM
    5. DON'T UPDATE AOD apk otherwise you'll get again the "AOD CHARGING BUG"

    HOW TO CLEAN INSTALL

    Follow these steps carefully! CLEAN INSTALL is always RECOMMENDED!
    MAKE SURE YOU HAVE LATEST MODEM AND BOOTLOADER INSTALLED!

    TWRP 3.3.1.1
    1. Go back in TWRP menu' and press INSTALL
    2. Then select NOBLE ROM zip and SWIPE TO CONFIRM FLASH
    3. Follow AROMA instruction (FOR STARTERS: select NO DEBLOAT and CLEAN INSTALL options)
    7. REBOOT
    8. FINISH FIRST SETUP
    9. THEN IF YOU WANT OneUI 2.5 CAMERA: REBOOT TO TWRP
    FLASH OneUI 2.5 Camera zip and REBOOT
    10. Enjoy Noble ROM

    TWRP 3.5.x.x
    1. Open TWRP by pressing volume up+ bixby + power buttons
    2. Go in WIPE menu' and press ADVANCED WIPE
    3. Then select: system, vendor, data, cache, dalvik and SWIPE TO WIPE
    4. Go back in TWRP menu' and press INSTALL
    5. Then select NOBLE ROM zip and SWIPE TO CONFIRM FLASH
    6. Follow AROMA instruction (FOR STARTERS: select NO DEBLOAT and CLEAN INSTALL options)
    7. If you try to reboot you will see 'NO OS INSTALLED' warning
    8. Go back WITHOUT REBOOTING and FLASH THE ROM AGAIN
    9. Then REBOOT
    10. FINISH FIRST SETUP
    11. THEN IF YOU WANT OneUI 2.5 CAMERA: REBOOT TO TWRP
    FLASH OneUI 2.5 Camera zip and REBOOT
    12. Enjoy Noble ROM

    More and graphic infos here: https://www.instagram.com/p/CO06wHpMcwI/?igshid=1vrk1lx3zhldo

    HOW TO DIRTY FLASH

    TWRP 3.3.1.1

    1. in TWRP menu' and press INSTALL
    2. Then select NOBLE ROM zip and SWIPE TO CONFIRM FLASH
    3. Follow AROMA instruction (FOR STARTERS: select NO DEBLOAT and DIRTY FLASH option)
    4. REBOOT
    5. FINISH FIRST SETUP
    6. THEN IF YOU WANT OneUI 2.5 CAMERA: REBOOT TO TWRP
    FLASH OneUI 2.5 Camera zip and REBOOT
    7. Enjoy Noble ROM

    TWRP 3.5.x.x
    1.
    Wipe system and vendor
    2. Go back in TWRP menu' and press INSTALL
    3. Then select NOBLE ROM zip and SWIPE TO CONFIRM FLASH
    4. Follow AROMA instruction (FOR STARTERS: select NO DEBLOAT option)
    5. If you try to reboot you will see 'NO OS INSTALLED' warning
    6. Go back WITHOUT REBOOTING and FLASH THE ROM AGAIN
    7. Then REBOOT
    8. FINISH FIRST SETUP
    9. THEN IF YOU WANT OneUI 2.5 CAMERA: REBOOT TO TWRP
    FLASH OneUI 2.5 Camera zip and REBOOT
    10. Enjoy Noble ROM


    more graphics infos here: https://www.instagram.com/p/COIQbO4sHfF/

    DOWNLOAD LINK

    Telegram_(software)-Logo.wine.png

    24
    NOBLE ROM 1.1 IS ONLINE!
    Hope you will enjoy! Clean install is recommended!

    CHANGELOG:
    Added S9 and S9+ support (S9 users have to renunce at bixby service)
    Fixed Photo Editor FC after update
    Fixed Game Launcher FC before update
    Fixed heart rate sensor
    Fixed sound loudness
    Fixed Biometrics Settings fc after setting new biometric lock
    Added Sound Alive missing modes
    Fixed installation message error "system not mounted" and symlinks errors
    Added new option in AROMA to choose which kind of debloat you wanna apply
    Removed Good Lock section in AROMA and put an option to install just Good Lock Launcher app
    Removed Chinese Smart Manager in aroma
    Removed not working camera modes
    Updated kernels
    Improved general stability and performance

    HOW TO INSTALL:
    Follow these steps carefully! CLEAN INSTALL is always RECOMMENDED!

    TWRP 3.3.1.1
    1. Open TWRP by pressing volume up+ bixby + power buttons
    2. Go in WIPE menu' and press ADVANCED WIPE
    3. Then select: system, vendor, data, cache, dalvik and SWIPE TO WIPE
    4. Go back in TWRP menu' and press INSTALL
    5. Then select NOBLE ROM zip and SWIPE TO CONFIRM FLASH
    6. Follow AROMA instruction (FOR STARTERS: select NO DEBLOAT option)
    7. REBOOT and enjoy NOBLE ROM!

    TWRP 3.5.x.x
    1. Open TWRP by pressing volume up+ bixby + power buttons
    2. Go in WIPE menu' and press ADVANCED WIPE
    3. Then select: system, vendor, data, cache, dalvik and SWIPE TO WIPE
    4. Go back in TWRP menu' and press INSTALL
    5. Then select NOBLE ROM zip and SWIPE TO CONFIRM FLASH
    6. Follow AROMA instruction (FOR STARTERS: select NO DEBLOAT option)
    7. If you try to reboot you will see 'NO OS INSTALLED' warning
    8. Go back WITHOUT REBOOTING and FLASH THE ROM AGAIN
    9. Then REBOOT and enjoy NOBLE ROM!

    More and graphic infos here: https://www.instagram.com/p/CM_3lWHsvUW/

    IMPORTANT NOTES:
    1. For STARTERS is important to select NO DEBLOAT option, in order to prevent issues with the
    ADVANCED DEBLOAT
    2. Is RECOMMENDED to use TWRP 3.3.1.1 with this build. DON'T COMPLAIN about this, I will get it fully working for newer TWRP as soon as I have enough time.
    3. Backup your phone before installing! In TWRP press BACKUP and select:
    System Image, Vendor Image, Boot Image, Data, Baseband and EFS
    and save your backup in your Internal Storage

    DOWNLOAD LINK:
    NOBLE ROM 1.1: https://www.androidfilehost.com/?fid=2188818919693772286
    CAMERA FIX ONLY FOR G960F/FD/N USERS: https://www.androidfilehost.com/?fid=2188818919693772295
    KERNEL FIX ONLY FOR G960F/FD/N USERS:

    TELEGRAM GROUP:

    FOLLOW ME ON MY NEW INSTAGRAM's PROFILE: https://www.instagram.com/invites/contact/?i=wehmn6h8vftx&utm_content=ibotzda

    Follow me on Facebook: https://www.facebook.com/AlexisDevXDA/
    22
    NOBLE ROM 1.5 IS ONLINE!
    Hope you will enjoy! Clean install is recommended!

    CHANGELOG:
    Updated base to N10+ base with July's patches (FUF5)
    Updated kernels and CSC
    Fixed Ultra Wide Front Camera
    Improved Rear Live Focus
    Improved overall camera performance
    Improved sound quality and microphones quality
    Improved RAM Management and background processes management
    Removed morosound
    Updated camera firmware and libs
    Updated sound libs
    Added Patched Dual Apps apk (could still cause bootloop for someone)
    Other minor improvements underhood

    HOW TO INSTALL:
    Follow these steps carefully! CLEAN INSTALL is always RECOMMENDED!

    TWRP 3.3.1.1
    1. Open TWRP by pressing volume up+ bixby + power buttons
    2. Go in WIPE menu' and press ADVANCED WIPE
    3. Then select: system, vendor, data, cache, dalvik and SWIPE TO WIPE
    4. Go back in TWRP menu' and press INSTALL
    5. Then select NOBLE ROM zip and SWIPE TO CONFIRM FLASH
    6. Follow AROMA instruction (FOR STARTERS: select NO DEBLOAT option)
    7. REBOOT and enjoy NOBLE ROM!

    TWRP 3.5.x.x
    1. Open TWRP by pressing volume up+ bixby + power buttons
    2. Go in WIPE menu' and press ADVANCED WIPE
    3. Then select: system, vendor, data, cache, dalvik and SWIPE TO WIPE
    4. Go back in TWRP menu' and press INSTALL
    5. Then select NOBLE ROM zip and SWIPE TO CONFIRM FLASH
    6. Follow AROMA instruction (FOR STARTERS: select NO DEBLOAT option)
    7. If you try to reboot you will see 'NO OS INSTALLED' warning
    8. Go back WITHOUT REBOOTING and FLASH THE ROM AGAIN
    9. Then REBOOT and enjoy NOBLE ROM!

    More and graphic infos here: https://www.instagram.com/p/CM_3lWHsvUW/

    IMPORTANT NOTES:
    1. As stated above, TWRP 3.3.1.0/1 is really recommended
    2. SM-G960N, SM-G965N and SM-N960N HAVE TO INSTALL the ROM zip with "ONLY_N_VARIANT" title
    3. Also CLEAN FLASH IS RECOMMENDED
    4. Don't update AOD apk from GALAXY STORE or you will get again "AOD CHARGING BUG"
    5. Don't update Photo Editor from GALAXY STORE

    DOWNLOAD LINK:
    NOBLE ROM 1.5: https://www.androidfilehost.com/?fid=14943124697586367916

    NOBLE ROM 1.5 FOR G960N, G965N, N960N: https://www.androidfilehost.com/?fid=14943124697586367908

    TELEGRAM GROUP:


    TELEGRAM CHANNEL:

    FOLLOW ME ON MY NEW INSTAGRAM's PROFILE: https://www.instagram.com/invites/contact/?i=wehmn6h8vftx&utm_content=ibotzda

    Follow me on Facebook: https://www.facebook.com/AlexisDevXDA/
    18
    NOBLE ROM 1.4 IS ONLINE!
    Hope you will enjoy! Clean install is recommended!

    CHANGELOG:
    Updated to latest N10+ base with June's patches (FUEB)
    Fixed Smart Mirroring and Wireless DEX
    Maybe fixed dual app rebooting bootloop issue
    Updated some samsung apps in order to prevent force closes
    Updated Photo Editor to latest version
    Added AROMA option to choose Noble BootAnimation
    Added AROMA option to debloat Google App
    Added Bixby Support also to S9 and S9+
    Improved General Stability and Performance

    HOW TO INSTALL:
    Follow these steps carefully! CLEAN INSTALL is always RECOMMENDED!

    TWRP 3.3.1.1
    1. Open TWRP by pressing volume up+ bixby + power buttons
    2. Go in WIPE menu' and press ADVANCED WIPE
    3. Then select: system, vendor, data, cache, dalvik and SWIPE TO WIPE
    4. Go back in TWRP menu' and press INSTALL
    5. Then select NOBLE ROM zip and SWIPE TO CONFIRM FLASH
    6. Follow AROMA instruction (FOR STARTERS: select NO DEBLOAT option)
    7. REBOOT and enjoy NOBLE ROM!

    TWRP 3.5.x.x
    1. Open TWRP by pressing volume up+ bixby + power buttons
    2. Go in WIPE menu' and press ADVANCED WIPE
    3. Then select: system, vendor, data, cache, dalvik and SWIPE TO WIPE
    4. Go back in TWRP menu' and press INSTALL
    5. Then select NOBLE ROM zip and SWIPE TO CONFIRM FLASH
    6. Follow AROMA instruction (FOR STARTERS: select NO DEBLOAT option)
    7. If you try to reboot you will see 'NO OS INSTALLED' warning
    8. Go back WITHOUT REBOOTING and FLASH THE ROM AGAIN
    9. Then REBOOT and enjoy NOBLE ROM!

    More and graphic infos here: https://www.instagram.com/p/CM_3lWHsvUW/

    IMPORTANT NOTES:
    1. As stated above, TWRP 3.3.1.0/1 is really recommended
    2. SM-G960N, SM-G965N and SM-N960N HAVE TO INSTALL the ROM zip with "ONLY_N_VARIANT" title
    3. Also CLEAN FLASH IS RECOMMENDED
    4. Don't update AOD apk from GALAXY STORE or you will get again "AOD CHARGING BUG"
    5. If you don't like how sound is, we added Morosound Mod in kernel so you can set it however you prefer with a Kernel Manager App!

    DOWNLOAD LINK:
    NOBLE ROM 1.4: https://www.androidfilehost.com/?fid=14943124697586349890

    NOBLE ROM 1.4 FOR G960N, G965N, N960N: https://www.androidfilehost.com/?fid=14943124697586349896

    MIRROR: https://www.androidfilehost.com/?w=files&flid=326262

    TELEGRAM GROUP:


    TELEGRAM CHANNEL:

    FOLLOW ME ON MY NEW INSTAGRAM's PROFILE: https://www.instagram.com/invites/contact/?i=wehmn6h8vftx&utm_content=ibotzda

    Follow me on Facebook: https://www.facebook.com/AlexisDevXDA/
    18
    NOBLE ROM 1.2 IS ONLINE!
    Hope you will enjoy! Clean install is recommended!

    CHANGELOG:
    Updated base to N10+/N10Lite with April's security patches (FUCD)
    Updated kernel's stability and patches, now are more stockish
    Updated Magisk version to Canary in order to get safetynet fixed (fix guide could still be needed)
    Updated Game Launcher App by default
    Updated Photo Editor App by default
    Fixed lockscreen's pin issue
    Fixed DEX issues
    Fixed audio too loud and Dolby Atmos support
    Fixed microphone volume too low
    Fixed Tethering USB
    Improved microphones quality
    Fixed Single Take FC in some cases
    Re-added Video Pro Mode
    Fixed installer, now S9 users won't need any fix to install after ROM
    Fixed Magisk App installation, now it's installed by default
    Now this ROM supports F2FS File System
    Improved RAM Management
    Improved general stability for all devices, specially on S9 (G960)
    Other minor improvements and bugs fixes...

    HOW TO INSTALL:
    Follow these steps carefully! CLEAN INSTALL is always RECOMMENDED!

    TWRP 3.3.1.1
    1. Open TWRP by pressing volume up+ bixby + power buttons
    2. Go in WIPE menu' and press ADVANCED WIPE
    3. Then select: system, vendor, data, cache, dalvik and SWIPE TO WIPE
    4. Go back in TWRP menu' and press INSTALL
    5. Then select NOBLE ROM zip and SWIPE TO CONFIRM FLASH
    6. Follow AROMA instruction (FOR STARTERS: select NO DEBLOAT option)
    7. REBOOT and enjoy NOBLE ROM!

    TWRP 3.5.x.x
    1. Open TWRP by pressing volume up+ bixby + power buttons
    2. Go in WIPE menu' and press ADVANCED WIPE
    3. Then select: system, vendor, data, cache, dalvik and SWIPE TO WIPE
    4. Go back in TWRP menu' and press INSTALL
    5. Then select NOBLE ROM zip and SWIPE TO CONFIRM FLASH
    6. Follow AROMA instruction (FOR STARTERS: select NO DEBLOAT option)
    7. If you try to reboot you will see 'NO OS INSTALLED' warning
    8. Go back WITHOUT REBOOTING and FLASH THE ROM AGAIN
    9. Then REBOOT and enjoy NOBLE ROM!

    More and graphic infos here: https://www.instagram.com/p/CM_3lWHsvUW/

    IMPORTANT NOTES:
    1. For STARTERS is important to select NO DEBLOAT option, in order to prevent issues with the
    ADVANCED DEBLOAT
    2. Is RECOMMENDED to use TWRP 3.3.1.1 with this build. DON'T COMPLAIN about this, I will get it fully working for newer TWRP as soon as I have enough time.
    3. Backup your phone before installing! In TWRP press BACKUP and select:
    System Image, Vendor Image, Boot Image, Data, Baseband and EFS
    and save your backup in your Internal Storage

    DOWNLOAD LINK:
    NOBLE ROM 1.2: https://www.androidfilehost.com/?fid=2188818919693788921

    TELEGRAM GROUP:


    FOLLOW ME ON MY NEW INSTAGRAM's PROFILE: https://www.instagram.com/invites/contact/?i=wehmn6h8vftx&utm_content=ibotzda

    Follow me on Facebook: https://www.facebook.com/AlexisDevXDA/