[NOBLE ROM 4.0.5 CALABRIA II OneUI 6.0 FULL PORT][02/24 Patches][18/02/2024][SM-N960F/FD/N--SM-G96xF/FD/N]

Search This thread
Wireless charging are not about hardware?
Alexis can make with software?
I didn't say it's not hardware! I just said we can reverse the wireless charge function to make it working for powershare, but as it's not made for that, it makes so much heating leading to wireless charging die at the end...
 
  • Like
Reactions: Leakhanak

unloved

Senior Member
May 17, 2021
145
19
I didn't say it's not hardware! I just said we can reverse the wireless charge function to make it working for powershare, but as it's not made for that, it makes so much heating leading to wireless charging die at the end...
End question
Press home button vibration how disable please help

I disabled press home button but have vibration still
 

Aakrep

Senior Member
Feb 26, 2014
87
10
Antalya
NOBLE ROM 1.7 IS ONLINE!
Hope you will enjoy! Clean install is recommended!

CHANGELOG:
Updated base to N10+ OneUI 3.1.1 base with November's patches (FUJ1)
Updated kernels and CSC
Updated vendor to latest N10 Lite base
Fixed soft reboot issue caused by updating apps
Fixed usb settings greyed out
Fixed fonts issues
Fixed "SIM Card has changed" popup error
OneUI 2.5 Camera put again by default
Added an option in aroma to choose between Noble or WhiteWolf Kernel (by yarpin)
Improved Perforamance
Other minor Improvements

HOW TO INSTALL:
Follow these steps carefully! CLEAN INSTALL is always RECOMMENDED!

TWRP 3.3.1.1
1. Open TWRP by pressing volume up+ bixby + power buttons
2. Go in WIPE menu' and press ADVANCED WIPE
3. Then select: system, vendor, data, cache, dalvik and SWIPE TO WIPE
4. Go back in TWRP menu' and press INSTALL
5. Then select NOBLE ROM zip and SWIPE TO CONFIRM FLASH
6. Follow AROMA instruction (FOR STARTERS: select NO DEBLOAT option)
7. REBOOT and enjoy NOBLE ROM!

TWRP 3.5.x.x
1. Open TWRP by pressing volume up+ bixby + power buttons
2. Go in WIPE menu' and press ADVANCED WIPE
3. Then select: system, vendor, data, cache, dalvik and SWIPE TO WIPE
4. Go back in TWRP menu' and press INSTALL
5. Then select NOBLE ROM zip and SWIPE TO CONFIRM FLASH
6. Follow AROMA instruction (FOR STARTERS: select NO DEBLOAT option)
7. If you try to reboot you will see 'NO OS INSTALLED' warning
8. Go back WITHOUT REBOOTING and FLASH THE ROM AGAIN
9. Then REBOOT and enjoy NOBLE ROM!

More and graphic infos here: https://www.instagram.com/p/CM_3lWHsvUW/

IMPORTANT NOTES:
1. As stated above, TWRP 3.3.1.0/1 is really recommended
2. SM-G960N, SM-G965N and SM-N960N HAVE TO INSTALL the ROM zip with "ONLY_N_VARIANT" title
3. Also CLEAN FLASH IS RECOMMENDED
4. Don't update AOD apk from GALAXY STORE or you will get again "AOD CHARGING BUG"
5. Don't update Photo Editor from GALAXY STORE

DOWNLOAD LINK:
NOBLE ROM 1.7: https://www.androidfilehost.com/?fid=7161016148664840459

NOBLE ROM 1.7 FOR G960N, G965N, N960N: https://www.androidfilehost.com/?fid=7161016148664840460

TELEGRAM GROUP:


TELEGRAM CHANNEL:

FOLLOW ME ON MY NEW INSTAGRAM's PROFILE: https://www.instagram.com/invites/contact/?i=wehmn6h8vftx&utm_content=ibotzda

Follow me on Facebook: https://www.facebook.com/AlexisDevXDA/
Please add viper fx or dolby atmos option in aroma installer.
 

hliem85

Member
Jun 9, 2018
8
0
Instructions to fix the error of the location icon in the weather
263357831_1397334267383592_7652663232232072404_n.jpg
 

Throne3

Member
May 11, 2020
5
0
Hi everyone,

A bit off topic, I can't install TWRP due to RMM status is prenormal, it is there even before I enable OEM unlock.

Currently running on Android 10 with November 2021 patch.

Any ideas to bypass RMM prenormal ?
 

MrFreeze

Senior Member
Jun 23, 2005
85
3
Melle
Samsung Galaxy A52 5G
The HW button only switches the mobile phone on and off... The menu is missing when pressed longer


EDIT
In the AROMA installer I specified that the Bixby button should be for screenshot. This does not work.
 
Last edited:
The HW button only switches the mobile phone on and off... The menu is missing when pressed longer


EDIT
In the AROMA installer I specified that the Bixby button should be for screenshot. This does not work.

side key settings.

at my phone,bixby button works as screenshot button.
 

Attachments

  • Screenshot_20211210-181959_Settings.png
    Screenshot_20211210-181959_Settings.png
    121.5 KB · Views: 72
  • Screenshot_20211210-181903_One UI Home.png
    Screenshot_20211210-181903_One UI Home.png
    569.2 KB · Views: 73
Last edited:
  • Like
Reactions: MrFreeze

marlen07

Member
Dec 28, 2018
43
5
For SM-G965N the power button works for some time then the power menu does not appears and the system tray does not allow to swipe up after some time to see other options.
 

shalannn

Senior Member
Apr 7, 2020
74
5
View attachment 5244917

This project has been possible thanks to the precious and very very hard work of @ridwan.sn and @bulldog74ts.

DISCLAIMER

We will be aware of your problems caused by root like tripped knox... When you flash something like this you may know about the risks you are going to find in!

Always backup your phone before and after flashing TWRP custom recovery:
In TWRP press BACKUP and select:
System Image, Vendor Image, Boot Image, Data, Baseband and EFS
and save your backup in your Internal Storage.

DESCRIPTION

SM-N96xF/FD supported.
Based on official OneUI 3.1.1 N10+ (FUJ1) with November's Security Patches.
All OneUI 3.1 functions have been ported, only camera is from OneUI 2.5.
Odexed, Hardly Debloated and added some tweaks for best performance and better battery.
Added some tweaks in order to have the best smoothness and general performance!
Make your ROM! OUR aroma allows you to select everything you want to have on your phone in order to improve the user experience!
Remappable Bixby Button
Disabled RMM Lock.
Google Pay working (Hide it with Magisk)
Secure Folder working
S21 Wallpapers
Some OneUI 4 Apps Ported
Useful Cards section enabled in Messages Apps
Improved zoom quality in gallery
Useful cards tab enabled in messages
Night mode zoom on camera.
Night mode on hyperlapse.
Enabled Dolby on Game.
Power key in notification panel.
Samsung App Lock.
iOS 14 Emoji's selectable in aroma.
And much more, don't worry if the rom size is big, it contains all you need ;).

AROMA INSTALLER

KNOWN BUGS

1. Live Focus and Selective Focus (just for S9 G960 users)
2. Sometimes Gallery link in camera is greyed but IF YOU PRESS IT, IT WORKS NORMALLY
3. Dual App may cause rebooting bootloop (we should have fixed with last update but just be careful, make a backup before enabling it)

IMPORTANT NOTES

1. For STARTERS is important to select NO DEBLOAT option, in order to prevent issues with the ADVANCED DEBLOAT
2. Is RECOMMENDED to use TWRP 3.3.1.1 with this build. DON'T COMPLAIN about this, I will get it fully working for newer TWRP as soon as I have enough time.
3. Backup your phone before installing!
4. Update your MODEM AND BOOTLOADER BEFORE INSTALLING THIS ROM
5. DON'T UPDATE AOD apk otherwise you'll get again the "AOD CHARGING BUG"

HOW TO CLEAN INSTALL

Follow these steps carefully! CLEAN INSTALL is always
MAKE SURE YOU HAVE LATEST MODEM AND BOOTLOADER INSTALLED!

TWRP 3.3.1.1
1. Go back in TWRP menu' and press INSTALL
2. Then select NOBLE ROM zip and SWIPE TO CONFIRM FLASH
3. Follow AROMA instruction (FOR STARTERS: select NO DEBLOAT and CLEAN INSTALL options)
7. REBOOT
8. Enjoy Noble ROM

TWRP 3.5.x.x
1. Open TWRP by pressing volume up+ bixby + power buttons
2. Go in WIPE menu' and press ADVANCED WIPE
3. Then select: system, vendor, data, cache, dalvik and SWIPE TO WIPE
4. Go back in TWRP menu' and press INSTALL
5. Then select NOBLE ROM zip and SWIPE TO CONFIRM FLASH
6. Follow AROMA instruction (FOR STARTERS: select NO DEBLOAT and CLEAN INSTALL options)
7. If you try to reboot you will see 'NO OS INSTALLED'
8. Go back WITHOUT REBOOTING and FLASH THE ROM AGAIN
9. Then REBOOT
10. Enjoy Noble ROM

More and graphic infos here: https://www.instagram.com/p/CO06wHpMcwI/?igshid=1vrk1lx3zhldo

HOW TO DIRTY FLASH

TWRP 3.3.1.1

1. in TWRP menu' and press INSTALL
2. Then select NOBLE ROM zip and SWIPE TO CONFIRM FLASH
3. Follow AROMA instruction (FOR STARTERS: select NO DEBLOAT and DIRTY FLASH option)
4. REBOOT
5. Enjoy Noble ROM

TWRP 3.5.x.x
1.
Wipe system and vendor
2. Go back in TWRP menu' and press INSTALL
3. Then select NOBLE ROM zip and SWIPE TO CONFIRM FLASH
4. Follow AROMA instruction (FOR STARTERS: select NO DEBLOAT option)
5. If you try to reboot you will see 'NO OS INSTALLED'
6. Go back WITHOUT REBOOTING and FLASH THE ROM AGAIN
7. Then REBOOT
8. Enjoy Noble ROM


more graphics infos here: https://www.instagram.com/p/COIQbO4sHfF/

DOWNLOAD LINK



I have a Galaxy S9 Snapdragon US G960U Will the Noble 1.7 system work without any problems?

Another question I have a HTC u11 Can I install Rom Noble 1.7 without any problems?
 
I have a Galaxy S9 Snapdragon US G960U Will the Noble 1.7 system work without any problems?

Another question I have a HTC u11 Can I install Rom Noble 1.7 without any problems?
You can't install Noble Rom on G960U. Only Exynos model is supported.
and Noble is Only for 9 series, you can't flash it on HTC. LOL
 

ozizil

New member
Apr 29, 2016
4
0
Samsung Galaxy Note 9
Hello I just installed the v1.7, all went well but after I tried to log in to samsung account it always failed. Can someone help? Thanks before.

note: I clean install and picked no debloat.
 
Hello I just installed the v1.7, all went well but after I tried to log in to samsung account it always failed. Can someone help? Thanks before.

note: I clean install and picked no debloat.
Log in to your Samsung acc by the Game Launcher (for example by linking Discord), then update the Samsung Account app through the Galaxy Store. You're welcome :D
 
  • Like
Reactions: ozizil

Top Liked Posts

  • There are no posts matching your filters.
  • 6
    @AlexisXDA Do you think S21 Will get the new Ai Update with OneUI 6.1? And if s21 get the AI update will you port the update to Galaxy Note9/S9?
    S21 won't get AI but I'll try to port as many function as possible
    2
    Can someone provide a fix please.

    I clean flashed 5.1 ui version everything works fine but the phone can't read sim cards and only showing emergemcy calls only.
    I try to flash again but diffrent csc and nothing changed and i tried some fixed that includes deleting some files in the root files and nothing works.
    My imei didnt change from the stock to noble room.

    Emergency calls only problem
    Flash the latest stock firmware for your device. it sounds like you flashed from an older stock rom. once you've flashed stock, reflash Noble rom.
    1
    Hello! I would like to ask when will the One Ui 6.1 and Android 15 One Ui 7 be available for Noble Rom? Thank you.
    1
    Great rom so far. Thanks @AlexisXDA
  • 194
    alex.png

    Disclaimer

    We are not responsable of any problems caused by root like tripped knox... When you flash something like this you may know about the risks you are going to find in!

    Always backup your phone before and after flashing TWRP custom recovery:

    In TWRP press BACKUP and select:
    System Image, Vendor Image, Boot Image, Data, Baseband and EFS
    and save your backup in your Internal Storage.


    1.png

    • SM-N96xF/FD/N, SM-G96xF/FD/N supported. Only Exynos, no Snapdragon support.
    • Based on official OneUI 6 S21 (system) + N10Lite (vendor) with February 2024 Security Patches.
    • Odexed, heavily Debloated and tweaked for best performance and better battery.
    • MAKE YOUR ROM!
      AROMA INSTALLER allows you to setup NOBLE ROM as you really wish! Select what to DEBLOAT and what to INSTALL as you wish!
    • Choose one CSC from more than 100 available!
    • More than 50 apps that can be debloated more!
    • Choose which build.prop or csc mods you want
    • Choose between Magisk, KernelSU or No Root options
    • Choose RAM Compression Level
    • Bixby Button Remappable
    • Light Performance and High Performance modes unlocked in "Device Care"
    • Protect your battery option enabled in "Device Care"
    • DualSIM and MultiSIM switcher supported
    • Disabled RMM Lock.
    • Safetynet passes just by enabling zygisk!
    • Secure Folder and App Lock available
    • Call Recording support
    • Outdoor Mode available on Settings/Display
    • Fingerprint unlock and fingerprint gestures working
    • Photo Remaster, Object Eraser, Image Clipper supported
    • New portrait effects available
    • Adaptive Eye comfort shield and Extra Dim supported
    • Greatest Audio experience with our Dolby Atmos settings
    • Camera fully working (check bugs list for minor issues)
    • Night mode zoom on camera
    • Night mode on hyperlapse
    • Bixby Vision and Document Scan supported
    • AR Apps supported
    • Dolby Atmos supported
    • Samsung DEX supported, choose to run it directly in your phone's display (AROMA option)
    • Good Lock available for all countries
    • S23 Wallpapers pre-installed
    • iOS 16 or OneUI 6 emojis selectable in aroma.
    • OneUI 6 Apps supported (check OneUI 6 Apps Post for more)
    • And much more, don't worry if the rom size is big, it contains all you need ;).

    2.png


    3.png

    TWRP 3.7.0_9-0
    0. Make a Backup of EFS and of all your stuffs before proceeding
    1. Open TWRP by pressing volume up+ bixby + power buttons
    2. Press on "Install" and select Universal9810_Repartitioner https://xdaforums.com/attachments/universal9810_repartitioner-zip.5816841/
    3. Reboot to TWRP
    4. Press on "Wipe" and select "Format Data" then type "yes"
    5. Reboot again to TWRP
    6. Press on "Install" and select Universal9810_Cleaner https://xdaforums.com/attachments/universal9810_cleaner-zip.5809289/
    7. Reboot again to TWRP
    8. Press "Install" and select NOBLEROM zip
    9. Follow AROMA instruction and at the end of installation, reboot
    10. Enjoy Noble ROM


    4.png


    5.png


    6.png


    7.png


    35
    NOBLE ROM 2.0 IS ONLINE!
    Hope you will enjoy! Clean install is hardly recommended!

    CHANGELOG:
    Inital Build for OneUI 4.0 FULL PORT
    Check this to know what's new on OneUI 4: https://telegra.ph/OneUI-4--Noble-ROM-20-Main-Changelog-01-29

    HOW TO INSTALL:
    Follow these steps carefully! CLEAN INSTALL is always RECOMMENDED!

    TWRP 3.6.0_9-1

    1. Open TWRP by pressing volume up+ bixby + power buttons
    2. Go in WIPE menu' and press ADVANCED WIPE
    3. Then select: system, vendor,odm, data, cache, dalvik and SWIPE TO WIPE
    4. Go back in TWRP menu' and press REBOOT, then press 'Recovery'
    5. After TWRP Reboot press 'Install' then select NOBLE ROM zip and SWIPE TO FLASH
    6. Follow AROMA instruction (FOR STARTERS: select NO DEBLOAT and CLEAN INSTALL options)

    7.Reboot System and Enjoy Noble ROM

    More and graphic infos here: https://www.instagram.com/p/COIQbO4sHfF/

    BUG LIST:
    Check this to know which bugs are currently on NOBLE ROM 2.0. This list will be constantly updated once we find new bugs or we fix new stuffs.


    IMPORTANT NOTES:
    1. For STARTERS is important to select NO DEBLOAT option, in order to prevent issues with the ADVANCED DEBLOAT
    2. Don't update Accessibility App from Galaxy Store or you will loose Extra Dim function
    3. Disable HDR from Camera Settings to avoid back camera crash
    4. Keep your face far from front Camera to avoid camera crash


    DOWNLOAD LINK:
    NOBLE ROM 2.0: https://www.androidfilehost.com/?fid=17825722713688289941

    NOBLE ROM 2.0 FOR G960N, G965N, N960N: https://www.androidfilehost.com/?fid=17825722713688289859

    VIDEO REVIEW OF NOBLE ROM 2.0 IS NOW OUT ON OUR YOUTUBE CHANNEL:

    TELEGRAM GROUP:


    TELEGRAM CHANNEL:

    FOLLOW ME ON MY NEW INSTAGRAM's PROFILE: https://www.instagram.com/invites/contact/?i=wehmn6h8vftx&utm_content=ibotzda

    Follow me on Facebook: https://www.facebook.com/AlexisDevXDA/
    25
    NOBLE ROM 1.1 IS ONLINE!
    Hope you will enjoy! Clean install is recommended!

    CHANGELOG:
    Added S9 and S9+ support (S9 users have to renunce at bixby service)
    Fixed Photo Editor FC after update
    Fixed Game Launcher FC before update
    Fixed heart rate sensor
    Fixed sound loudness
    Fixed Biometrics Settings fc after setting new biometric lock
    Added Sound Alive missing modes
    Fixed installation message error "system not mounted" and symlinks errors
    Added new option in AROMA to choose which kind of debloat you wanna apply
    Removed Good Lock section in AROMA and put an option to install just Good Lock Launcher app
    Removed Chinese Smart Manager in aroma
    Removed not working camera modes
    Updated kernels
    Improved general stability and performance

    HOW TO INSTALL:
    Follow these steps carefully! CLEAN INSTALL is always RECOMMENDED!

    TWRP 3.3.1.1
    1. Open TWRP by pressing volume up+ bixby + power buttons
    2. Go in WIPE menu' and press ADVANCED WIPE
    3. Then select: system, vendor, data, cache, dalvik and SWIPE TO WIPE
    4. Go back in TWRP menu' and press INSTALL
    5. Then select NOBLE ROM zip and SWIPE TO CONFIRM FLASH
    6. Follow AROMA instruction (FOR STARTERS: select NO DEBLOAT option)
    7. REBOOT and enjoy NOBLE ROM!

    TWRP 3.5.x.x
    1. Open TWRP by pressing volume up+ bixby + power buttons
    2. Go in WIPE menu' and press ADVANCED WIPE
    3. Then select: system, vendor, data, cache, dalvik and SWIPE TO WIPE
    4. Go back in TWRP menu' and press INSTALL
    5. Then select NOBLE ROM zip and SWIPE TO CONFIRM FLASH
    6. Follow AROMA instruction (FOR STARTERS: select NO DEBLOAT option)
    7. If you try to reboot you will see 'NO OS INSTALLED' warning
    8. Go back WITHOUT REBOOTING and FLASH THE ROM AGAIN
    9. Then REBOOT and enjoy NOBLE ROM!

    More and graphic infos here: https://www.instagram.com/p/CM_3lWHsvUW/

    IMPORTANT NOTES:
    1. For STARTERS is important to select NO DEBLOAT option, in order to prevent issues with the
    ADVANCED DEBLOAT
    2. Is RECOMMENDED to use TWRP 3.3.1.1 with this build. DON'T COMPLAIN about this, I will get it fully working for newer TWRP as soon as I have enough time.
    3. Backup your phone before installing! In TWRP press BACKUP and select:
    System Image, Vendor Image, Boot Image, Data, Baseband and EFS
    and save your backup in your Internal Storage

    DOWNLOAD LINK:
    NOBLE ROM 1.1: https://www.androidfilehost.com/?fid=2188818919693772286
    CAMERA FIX ONLY FOR G960F/FD/N USERS: https://www.androidfilehost.com/?fid=2188818919693772295
    KERNEL FIX ONLY FOR G960F/FD/N USERS:

    TELEGRAM GROUP:

    FOLLOW ME ON MY NEW INSTAGRAM's PROFILE: https://www.instagram.com/invites/contact/?i=wehmn6h8vftx&utm_content=ibotzda

    Follow me on Facebook: https://www.facebook.com/AlexisDevXDA/
    24
    NOBLE ROM 1.7 IS ONLINE!
    Hope you will enjoy! Clean install is recommended!

    CHANGELOG:
    Updated base to N10+ OneUI 3.1.1 base with November's patches (FUJ1)
    Updated kernels and CSC
    Updated vendor to latest N10 Lite base
    Fixed soft reboot issue caused by updating apps
    Fixed usb settings greyed out
    Fixed fonts issues
    Fixed "SIM Card has changed" popup error
    OneUI 2.5 Camera put again by default
    Added an option in aroma to choose between Noble or WhiteWolf Kernel (by yarpin)
    Improved Perforamance
    Other minor Improvements

    HOW TO INSTALL:
    Follow these steps carefully! CLEAN INSTALL is always RECOMMENDED!

    TWRP 3.3.1.1
    1. Open TWRP by pressing volume up+ bixby + power buttons
    2. Go in WIPE menu' and press ADVANCED WIPE
    3. Then select: system, vendor, data, cache, dalvik and SWIPE TO WIPE
    4. Go back in TWRP menu' and press INSTALL
    5. Then select NOBLE ROM zip and SWIPE TO CONFIRM FLASH
    6. Follow AROMA instruction (FOR STARTERS: select NO DEBLOAT option)
    7. REBOOT and enjoy NOBLE ROM!

    TWRP 3.5.x.x
    1. Open TWRP by pressing volume up+ bixby + power buttons
    2. Go in WIPE menu' and press ADVANCED WIPE
    3. Then select: system, vendor, data, cache, dalvik and SWIPE TO WIPE
    4. Go back in TWRP menu' and press INSTALL
    5. Then select NOBLE ROM zip and SWIPE TO CONFIRM FLASH
    6. Follow AROMA instruction (FOR STARTERS: select NO DEBLOAT option)
    7. If you try to reboot you will see 'NO OS INSTALLED' warning
    8. Go back WITHOUT REBOOTING and FLASH THE ROM AGAIN
    9. Then REBOOT and enjoy NOBLE ROM!

    More and graphic infos here: https://www.instagram.com/p/CM_3lWHsvUW/

    IMPORTANT NOTES:
    1. As stated above, TWRP 3.3.1.0/1 is really recommended
    2. SM-G960N, SM-G965N and SM-N960N HAVE TO INSTALL the ROM zip with "ONLY_N_VARIANT" title
    3. Also CLEAN FLASH IS RECOMMENDED
    4. Don't update AOD apk from GALAXY STORE or you will get again "AOD CHARGING BUG"
    5. Don't update Photo Editor from GALAXY STORE

    DOWNLOAD LINK:
    NOBLE ROM 1.7: https://www.androidfilehost.com/?fid=7161016148664840459

    NOBLE ROM 1.7 FOR G960N, G965N, N960N: https://www.androidfilehost.com/?fid=7161016148664840460

    TELEGRAM GROUP:


    TELEGRAM CHANNEL:

    FOLLOW ME ON MY NEW INSTAGRAM's PROFILE: https://www.instagram.com/invites/contact/?i=wehmn6h8vftx&utm_content=ibotzda

    Follow me on Facebook: https://www.facebook.com/AlexisDevXDA/
    24
    NOBLE ROM 2.8 IS ONLINE!
    Hope you will enjoy! Dirty flash from NOBLE ROM 2.1+ is allowed! If you come from NOBLE 1.x, 2.0 or any other ROM please Clean Flash!

    CHANGELOG:
    Final release for Android 12 NOBLE ROM
    Ported new A12 HAL from N10Lite (this means better performance and battery) (thanks to @ananjaser1211)
    Fixed Front Cam FC
    Fixed HDR FC in low light conditions
    Fixed Filters in front camera (only for F VARIANT)
    Fixed OK Google (Google App Installer needed) (thanks to @ananjaser1211 )
    Fixed 3D Touch Home Button (thanks to @ananjaser1211 )
    Improved general performance and battery life

    KERNEL CHANGELOG:
    Boostings optimized for battery
    Wakelock blocker updated
    Morosound included


    HOW TO INSTALL:
    Follow these steps carefully!
    Dirty flash from NOBLE ROM 2.1+ is allowed! If you come from NOBLE 1.x, 2.0 or any other ROM please Clean Flash!

    DON'T DO ANY ADVANCED WIPE, JUST GO IN TWRP AND DIRECTLY FLASH THE ROM. IF YOU HAVE SOME ISSUES WITH INSTALLER JUST FLASH AGAIN THE ROM

    TWRP 3.6.1_9-0
    0. Make a Backup of EFS and of all your stuffs before proceeding

    1. Open TWRP by pressing volume up+ bixby + power buttons
    2. Press 'Install' then select NOBLE ROM zip and SWIPE TO FLASH
    3. Dirty flash from NOBLE ROM 2.1+ is allowed! If you come from NOBLE 1.x, 2.0 or any other ROM please Clean Flash!
    4. Follow AROMA instruction (FOR STARTERS: select NO DEBLOAT)

    5.Reboot System and Enjoy Noble ROM

    IF AFTER DIRTY FLASH YOU FIND SOME PROBLEMS, PLEASE CLEAN INSTALL

    More and graphic infos here: https://www.instagram.com/p/Cbm7Gros2Hf/?utm_medium=copy_link
    Video tutorial of how to correctly install Noble ROM is here:

    BUG LIST:
    Check this to know which bugs are currently on NOBLE ROM. This list will be constantly updated once we find new bugs or we fix new stuffs.


    IMPORTANT NOTES:
    1. For STARTERS is important to select NO DEBLOAT option, in order to prevent issues with the ADVANCED DEBLOAT
    2. Install Magisk App manually downloading it from here: https://github.com/topjohnwu/Magisk/releases/tag/v25.2
    3. Don't update Photo Editor from Galaxy Store, if you do it please unistall it to have it working again
    4. Don't update Accessibility from Galaxy Store or you will loose Extra Dim function

    DOWNLOAD LINKS:
    NOBLE ROM 2.8:

    OneDrive MIRROR: https://1drv.ms/u/s!AmNYN7PXcx7NjAUZuHgNaWZAcWd3?e=Vhcrk3
    MEGA: MEDIAFIRE: Google Drive MIRROR: https://drive.google.com/file/d/1fnGhKSVbTmh829ehzSx-BgGpWKGV9uUI/view?usp=share_link


    NOBLE ROM 2.8 FOR G960N, G965N, N960N:
    OneDrive MIRROR: https://1drv.ms/u/s!AqGdTk4hyeaFiLF72fR2zmPeGQqyjw?e=ybodEE
    MEGA: MEDIAFIRE: Google Drive MIRROR: https://drive.google.com/file/d/13_APB0BOG8iyk1F76uWvxxvhF9oT6c60/view?usp=share_link


    BIXBY AND AR APPS ADDONS FOR N VARIANT (flash after the ROM booted): https://www.androidfilehost.com/?fid=15664248565197181607

    VIDEO TUTORIAL ON HOW TO ENABLE RAM PLUS ON NOBLE 2.0+ IS HERE:

    TELEGRAM GROUP:


    TELEGRAM CHANNEL:

    FOLLOW ME ON MY NEW INSTAGRAM's PROFILE: https://www.instagram.com/invites/contact/?i=wehmn6h8vftx&utm_content=ibotzda

    Follow me on Facebook: https://www.facebook.com/AlexisDevXDA/