YesHello, @AlexisXDA, thank you very much for the firmware, it is good, but should we expect one ui 4 port? Thanks for the answer
[NOBLE ROM 4.0.5 CALABRIA II OneUI 6.0 FULL PORT][02/24 Patches][18/02/2024][SM-N960F/FD/N--SM-G96xF/FD/N]
- Thread starter AlexisXDA
- Start date
bonjour ... y aura-t-il une rom Noble s9 avec One ui 4.0 ...
Translated by GT: hello ... will there be a Noble s9 rom with One ui 4.0 ...
Translated by GT: hello ... will there be a Noble s9 rom with One ui 4.0 ...
Last edited by a moderator:
fingerprint works great, but for iris no since this is a port from note 10 which don't have iris scanner
Hey,View attachment 5263313
This project has been possible thanks to the precious and very very hard work of @ridwan.sn and @bulldog74ts.
DISCLAIMERWe will be aware of your problems caused by root like tripped knox... When you flash something like this you may know about the risks you are going to find in!
Always backup your phone before and after flashing TWRP custom recovery:
In TWRP press BACKUP and select:
System Image, Vendor Image, Boot Image, Data, Baseband and EFS
and save your backup in your Internal Storage.
DESCRIPTIONSM-G96xF/FD/N SUPPORTED.
Based on official OneUI 3.1.1 N10+ (FUJ1) with November's Security Patches.
All OneUI 3.1 functions have been ported, only camera is from OneUI 2.5.
Odexed, Hardly Debloated and added some tweaks for best performance and better battery.
Added some tweaks in order to have the best smoothness and general performance!
Make your ROM! OUR aroma allows you to select everything you want to have on your phone in order to improve the user experience!
Remappable Bixby Button
Disabled RMM Lock.
Google Pay working (Hide it with Magisk)
Secure Folder working
S21 Wallpapers
Some OneUI 4 Apps Ported
Useful Cards section enabled in Messages Apps
Improved zoom quality in gallery
Useful cards tab enabled in messages
Night mode zoom on camera.
Night mode on hyperlapse.
Enabled Dolby on Game.
Power key in notification panel.
Samsung App Lock.
iOS 14 Emoji's selectable in aroma.
And much more, don't worry if the rom size is big, it contains all you need
AROMA INSTALLERView attachment 5263325View attachment 5263327View attachment 5263329View attachment 5263331View attachment 5263333View attachment 5263335View attachment 5263337View attachment 5263339View attachment 5263341
KNOWN BUGS 1. Live Focus and Selective Focus (just for S9 G960 users)
2. Usb Settings Menu will be shown as blanked
3. Sometimes Gallery link in camera is greyed but IF YOU PRESS IT, IT WORKS NORMALLY
4. Dual App may cause rebooting bootloop (we should have fixed with last update but just be careful, make a backup before enabling it)
IMPORTANT NOTES1. For STARTERS is important to select NO DEBLOAT option, in order to prevent issues with the ADVANCED DEBLOAT
2. Is RECOMMENDED to use TWRP 3.3.1.1 with this build. DON'T COMPLAIN about this, I will get it fully working for newer TWRP as soon as I have enough time.
3. Backup your phone before installing!
4. Update your MODEM AND BOOTLOADER BEFORE INSTALLING THIS ROM
5. DON'T UPDATE AOD apk otherwise you'll get again the "AOD CHARGING BUG"
HOW TO CLEAN INSTALLFollow these steps carefully! CLEAN INSTALL is always RECOMMENDED!
MAKE SURE YOU HAVE LATEST MODEM AND BOOTLOADER INSTALLED!
TWRP 3.3.1.1
1. Go back in TWRP menu' and press INSTALL
2. Then select NOBLE ROM zip and SWIPE TO CONFIRM FLASH
3. Follow AROMA instruction (FOR STARTERS: select NO DEBLOAT and CLEAN INSTALL options)
7. REBOOT
8. Enjoy Noble ROM
TWRP 3.5.x.x
1. Open TWRP by pressing volume up+ bixby + power buttons
2. Go in WIPE menu' and press ADVANCED WIPE
3. Then select: system, vendor, data, cache, dalvik and SWIPE TO WIPE
4. Go back in TWRP menu' and press INSTALL
5. Then select NOBLE ROM zip and SWIPE TO CONFIRM FLASH
6. Follow AROMA instruction (FOR STARTERS: select NO DEBLOAT and CLEAN INSTALL options)
7. If you try to reboot you will see 'NO OS INSTALLED' warning
8. Go back WITHOUT REBOOTING and FLASH THE ROM AGAIN
9. Reboot and Enjoy Noble ROM
More and graphic infos here: https://www.instagram.com/p/CO06wHpMcwI/?igshid=1vrk1lx3zhldo
HOW TO DIRTY FLASHTWRP 3.3.1.1
1. in TWRP menu' and press INSTALL
2. Then select NOBLE ROM zip and SWIPE TO CONFIRM FLASH
3. Follow AROMA instruction (FOR STARTERS: select NO DEBLOAT and DIRTY FLASH option)
4. REBOOT
5. Enjoy Noble ROM
TWRP 3.5.x.x
1. Wipe system and vendor
2. Go back in TWRP menu' and press INSTALL
3. Then select NOBLE ROM zip and SWIPE TO CONFIRM FLASH
4. Follow AROMA instruction (FOR STARTERS: select NO DEBLOAT option)
5. If you try to reboot you will see 'NO OS INSTALLED' warning
6. Go back WITHOUT REBOOTING and FLASH THE ROM AGAIN
7. Then REBOOT
8. Enjoy Noble ROM
more graphics infos here: https://www.instagram.com/p/COIQbO4sHfF/
DOWNLOAD LINK
i have installed this Noble ROM and everything is working fine as of now but i am facing an issue with opening camera app in samsung s9 device.
Please suggest what i can do for the same.
What i have done to resolve it: i have restarted my device but there is no luck. when opening the camera from other app its working fine like working with whats app camera
Thanks in advance
emcube009
Account currently disabled
Thanks for the hardword Alex. Does Rom 1.7 support knox.
I want samsung pass. And if knox is tripped apps like samsung pass wont work.
I want samsung pass. And if knox is tripped apps like samsung pass wont work.
Weaker microfon in fb messenger, instagram in audio and video call
Normal? I saw a screenshot of someone who's device had the icon in the QS panel. So I'm asking.
Has anyone tried getting Bixby button for screenshots? I reinstalled the ROM twice, everytime selecting Bixby button for screenshot but it still doesn't work.
You can activate wireless powershare in this ROM, because it's a port of Note 10. BUT the S9(+) have NOT the hardware for this feature (like the Note 10).
--> It would NOT WORK!
Thanks. Was just wondering. Because, I read a post someone on Quora that all Wireless Charging pads and receivers can send current and receive. I tried this myself. Using a Wireless charger power bank and wireless charger plugged into a phone with a OTG adapter and it actually charged, but slowly.
Top Liked Posts
-
There are no posts matching your filters.
-
1
For the sound tweak (and other), kindly use the Noble Kernel Manager, simply follow my setting except the Volume Control do it with your preference and or the Microphone settings.
If you're just installed to Noble and root your device, set your root setting on Magisk and add some module that you need to make all banking-app works.
In Noble 4.0.5 it's already added bluetooth library patcher to fix some of bluetooth things, but idk why I still add the same magisk module manually bcs I think the noble-patch isn't work accurately.1Hi all,
Just switched over to Noble 3.9 after many years on LineageOS. My country's 3G network shutdown forced my hand, but I'm amazed at how well this ROM works. A massive thank you to Alexis and everyone else who's contributed.
Like others here, I had to use the BluetoothLibraryPatcher magisk module to get paired devices to stick, but otherwise the install was easy and straightforward.
The only slight issue I've had is with RAM plus -- I've got it working, but only with 2Gb or 4Gb (my settings in SetEdit get overwritten after reboot (to "2048,4096" and "2,4") and the 6Gb and 8Gb options disappear from the RAM Plus screen). The SetEdit entries are correct (I've double-checked and set them twice now), and I've enabled the WRITE_SECURE_SETTINGS permission (and checked that it's present and enabled for SetEdit via AppManager). There's heaps of internal storage space available.
Is there any way to get the larger RAM Plus sizes as an option? (Don't get me wrong, though -- an extra 4Gb is awesome!)
Also, does anyone know if there's any way to allow music apps to set full screen album art on the lock screen? It seems an odd thing to be missing in One UI?
Thanks again! -
101
DisclaimerWe are not responsable of any problems caused by root like tripped knox... When you flash something like this you may know about the risks you are going to find in!
Always backup your phone before and after flashing TWRP custom recovery:
In TWRP press BACKUP and select:
System Image, Vendor Image, Boot Image, Data, Baseband and EFS
and save your backup in your Internal Storage.
- SM-N96xF/FD/N, SM-G96xF/FD/N supported. Only Exynos, no Snapdragon support.
- Based on official OneUI 6 S21 (system) + N10Lite (vendor) with February 2024 Security Patches.
- Odexed, Hardly Debloated and tweaked for best performance and better battery.
- MAKE YOUR ROM!
AROMA INSTALLER allows you to setup NOBLE ROM as you really wish! Select what to DEBLOAT and what to INSTALL as you wish! - Choose one CSC from more than 100 available!
- More than 50 apps that can be debloated more!
- Choose which build.prop or csc mods you want
- Choose between Magisk, KernelSU or No Root options
- Choose RAM Compression Level
- Bixby Button Remappable
- Light Performance and High Performance modes unlocked in "Device Care"
- Protect your battery option enabled in "Device Care"
- DualSIM and MultiSIM switcher supported
- Disabled RMM Lock.
- Safetynet passes just by enabling zygisk!
- Secure Folder and App Lock available
- Call Recording support
- Outdoor Mode available on Settings/Display
- Fingerprint unlock and fingerprint gestures working
- Photo Remaster, Object Eraser, Image Clipper supported
- New portrait effects available
- Adaptive Eye comfort shield and Extra Dim supported
- Greatest Audio experience with our Dolby Atmos settings
- Camera fully working (check bugs list for minor issues)
- Night mode zoom on camera
- Night mode on hyperlapse
- Bixby Vision and Document Scan supported
- AR Apps supported
- Dolby Atmos supported
- Samsung DEX supported, choose to run it directly in your phone's display (AROMA option)
- Good Lock available for all countries
- S23 Wallpapers pre-installed
- iOS 16 or OneUI 6 emojis selectable in aroma.
- OneUI 6 Apps supported (check OneUI 6 Apps Post for more)
- And much more, don't worry if the rom size is big, it contains all you need .
TWRP 3.7.0_9-0
0. Make a Backup of EFS and of all your stuffs before proceeding
1. Open TWRP by pressing volume up+ bixby + power buttons
2. Press on "Install" and select Universal9810_Repartitioner https://xdaforums.com/attachments/universal9810_repartitioner-zip.5816841/
3. Reboot to TWRP
4. Press on "Wipe" and select "Format Data" then type "yes"
5. Reboot again to TWRP
6. Press on "Install" and select Universal9810_Cleaner https://xdaforums.com/attachments/universal9810_cleaner-zip.5809289/
7. Reboot again to TWRP
8. Press "Install" and select NOBLEROM zip
9. Follow AROMA instruction and at the end of installation, reboot
10. Enjoy Noble ROM
13
Updated base to S21 February patches (FXAH)
Updated GPU and HWC drivers
Updated Magisk
Updated kernel for better performance, improved vibration feedback
Fixed document scan and text extraction
Fixed missing network speed
Fixed hdr fc in low light conditions (thx to @ananjaser1211)
Fixed reboots caused by hotspot (thx to @ananjaser1211)
Fixed vibration intensity in keyboard
Added aroma option for Galaxy 2024 Bootanimation
Added again fake enforcing support
Removed vibration and kernel app options in AROMA
Added Kernel Manager app by default
Improved general performance
We are still working on full enforcing but we got some good news. We managed to boot it but still not enough stable to be released, so wait for it in the next releases!
In order to prevent TWRP crash that make Magisk not installable, use this TWRP Patched: https://xdaforums.com/attachments/patch_twrp_xxtr-zip.5809969/
If you notice the "failed to mount /omr" and "failed to mount /preload" they are common and not a real issue. You can easily solve this by wiping OMR and Preload in Wipe/Advanced Wipe menu
If you have already done repartition skip to step 8
Make a Backup of EFS and of all your stuffs before proceeding
1. Open TWRP by pressing volume up+ bixby + power buttons
2. Press on "Install" and select Universal9810_Repartitioner https://xdaforums.com/attachments/universal9810_repartitioner-zip.5816841/
3. Reboot to TWRP
4. Press on "Wipe" and select "Format Data" then type "yes"
5. Reboot again to TWRP
6. Press on "Install" and select Universal9810_Cleaner https://xdaforums.com/attachments/universal9810_cleaner-zip.5809289/
7. Reboot again to TWRP
8. Press "Install" and select NOBLEROM zip
9. Follow AROMA instruction and at the end of installation
10. Reboot and Enjoy Noble ROM
VIDEO TUTORIAL ON HOW TO ENABLE RAM PLUS ON NOBLE 2.0+ IS HERE:
12NOBLE ROM 3.5 SCILLA IS ONLINE!
Instagram REEL here: https://www.instagram.com/reel/Ct1Xc_kAkLv/?igshid=NjZiM2M3MzIxNA==
CHANGELOG:
Updated base to OneUI 5.1 S20 firm with June's security patches (HWED)
Updated vendor base to N10Lite to June's base
Updated iOS 16 Emojis
Fixed BT audio issues
Fixed Bixby Vision (unistall Bixby Vision Framework's updates and don't update it)
Fixed Document Scan in camera
Added new portrait effects in camera
Added Light Performance Mode option and toggle
Added AOD Clock Transition
Added AROMA option for SELinux Fake Enforcing and Permissive
Added AROMA Option for KernelSU Root Option
Added AROMA Option for Green Screen Flickering FIX
Improved touch input, general performance and battery life
HOW TO INSTALL:
Follow these steps carefully! CLEAN INSTALL ONLY!
In order to prevent TWRP crash that make Magisk not installable, use this TWRP Patched: https://xdaforums.com/attachments/patch_twrp_xxtr-zip.5809969/
If you notice the "failed to mount /omr" and "failed to mount /preload" they are common and not a real issue. You can easily solve this by wiping OMR and Preload in Wipe/Advanced Wipe menu
TWRP 3.7.0_9-0
0. Make a Backup of EFS and of all your stuffs before proceeding
1. Open TWRP by pressing volume up+ bixby + power buttons
2. Press on "Install" and select Universal9810_Repartitioner https://xdaforums.com/attachments/universal9810_repartitioner-zip.5816841/
3. Reboot to TWRP
4. Press on "Wipe" and select "Format Data" then type "yes"
5. Reboot again to TWRP
6. Press on "Install" and select Universal9810_Cleaner https://xdaforums.com/attachments/universal9810_cleaner-zip.5809289/
7. Reboot again to TWRP
8. Press "Install" and select NOBLEROM zip
9. Follow AROMA instruction and at the end of installation, reboot
10. Enjoy Noble ROM
BUG LIST:
Check this to know which bugs are currently on NOBLE ROM. This list will be constantly updated once we find new bugs or we fix new stuffs.
DOWNLOAD LINKS:
NOBLE ROM 3.5 SCILLA:
OneDrive: https://1drv.ms/u/s!AqGdTk4hyeaFiLJnc0S1MDxLiBAKYQ?e=46Db5N
MEGA: https://mega.nz/file/bRQnWS6C#1Qdm_OmNN_NOtEvYrfz4KtAL2qlbIiw4aAhHPjxJbjE
MEDIAFIRE: https://www.mediafire.com/file/fjjwq6oohwhc6fg/NOBLEROM3.5_SCILLA.zip/file
Google Drive: https://drive.google.com/file/d/176Whmt7lvJ0hgfzVDXPii9DnNlnYpfwK/view?usp=sharing
VIDEO TUTORIAL ON HOW TO ENABLE RAM PLUS ON NOBLE 2.0+ IS HERE:
TELEGRAM GROUP:
TELEGRAM CHANNEL:
FOLLOW ME ON INSTAGRAM: https://www.instagram.com/invites/contact/?i=wehmn6h8vftx&utm_content=ibotzda
FOLLOW ME ON TWITTER:12NOBLE ROM 2.0 IS ONLINE!
Hope you will enjoy! Clean install is hardly recommended!
CHANGELOG:
Inital Build for OneUI 4.0 FULL PORT
Check this to know what's new on OneUI 4: https://telegra.ph/OneUI-4--Noble-ROM-20-Main-Changelog-01-29
HOW TO INSTALL:
Follow these steps carefully! CLEAN INSTALL is always RECOMMENDED!
TWRP 3.6.0_9-1
1. Open TWRP by pressing volume up+ bixby + power buttons
2. Go in WIPE menu' and press ADVANCED WIPE
3. Then select: system, vendor,odm, data, cache, dalvik and SWIPE TO WIPE
4. Go back in TWRP menu' and press REBOOT, then press 'Recovery'
5. After TWRP Reboot press 'Install' then select NOBLE ROM zip and SWIPE TO FLASH
6. Follow AROMA instruction (FOR STARTERS: select NO DEBLOAT and CLEAN INSTALL options)
7.Reboot System and Enjoy Noble ROM
More and graphic infos here: https://www.instagram.com/p/COIQbO4sHfF/
YouTube Video Review is coming, if you didn't understand how to flash this update or want to know more, just wait for it!
BUG LIST:
Check this to know which bugs are currently on NOBLE ROM 2.0. This list will be constantly updated once we find new bugs or we fix new stuffs.
IMPORTANT NOTES:
1. For STARTERS is important to select NO DEBLOAT option, in order to prevent issues with the ADVANCED DEBLOAT
2. Don't update Accessibility App from Galaxy Store or you will loose Extra Dim function
3. Disable HDR from Camera Settings to avoid back camera crash
4. Keep your face far from front Camera to avoid camera crash
DOWNLOAD LINK:
NOBLE ROM 2.0: https://www.androidfilehost.com/?fid=17825722713688289941
NOBLE ROM 2.0 FOR G960N, G965N, N960N: https://www.androidfilehost.com/?fid=17825722713688289859
TELEGRAM GROUP:
TELEGRAM CHANNEL:
FOLLOW ME ON MY NEW INSTAGRAM's PROFILE: https://www.instagram.com/invites/contact/?i=wehmn6h8vftx&utm_content=ibotzda
Follow me on Facebook: https://www.facebook.com/AlexisDevXDA/
