[NOBLE ROM 4.0.5 CALABRIA II OneUI 6.0 FULL PORT][02/24 Patches][18/02/2024][SM-N960F/FD/N--SM-G96xF/FD/N]

Search This thread

Javalom

Member
May 20, 2013
23
3
I did a dirty installation, everything works fine but it's draining the battery way too fast... Any solution or advice?
 
Nov 2, 2015
12
2
@headzy I tried the suggestion you posted a few times but my display is still the same. I'm using note 9 if this helps to spot the problem. I would highly appreciate any assistance from the telegram group if this issue was experienced in your end and was able to find a fix. Thank you very much.
Hi everyone: If you are still experiencing display problems with your Samsung device, this is what worked for me. I am very thankful to the creator.
The app is called PWMfree. It worked on my Galaxy Note 9.
 

manu70l

New member
Jun 28, 2022
3
0
good evening. I have a "SM-N960F" I flashed with "clean install", but in the end it says to me: "Failed to mount '/ odm' (invalid argument). I'm not understanding what the problem is. Can anyone help me? I apologize for the inconvenience and if I have added a new comment. I am not an expert on these matters.
 

unloved

Senior Member
May 17, 2021
145
19
good evening. I have a "SM-N960F" I flashed with "clean install", but in the end it says to me: "Failed to mount '/ odm' (invalid argument). I'm not understanding what the problem is. Can anyone help me? I apologize for the inconvenience and if I have added a new comment. I am not an expert on these matters.
wipe data wipe rebot on recovery and install zip again
 

manu70l

New member
Jun 28, 2022
3
0
wipe data wipe rebot on recovery and install zip again

Hi! yes, I tried again several times (5-6 times) but in the end it gave me this error. Eventually I installed another good custom-rom to keep using it, but sooner or later I will try to reinstall this ROM again. Is there a logical explanation as to why I get the odm mount error with this rom?
 

unloved

Senior Member
May 17, 2021
145
19
Hi! yes, I tried again several times (5-6 times) but in the end it gave me this error. Eventually I installed another good custom-rom to keep using it, but sooner or later I will try to reinstall this ROM again. Is there a logical explanation as to why I get the odm mount error with this rom?

flash last stok rom again open boot loader install twrp
come to noble again
 

tillward

Senior Member
Oct 29, 2013
350
84
London
good evening. I have a "SM-N960F" I flashed with "clean install", but in the end it says to me: "Failed to mount '/ odm' (invalid argument). I'm not understanding what the problem is. Can anyone help me? I apologize for the inconvenience and if I have added a new comment. I am not an expert on these matters.

Did you try flashing the N version? Worked for me when I had that issue.
 

manu70l

New member
Jun 28, 2022
3
0
Hai provato a flashare la versione N? Ha funzionato per me quando ho avuto quel problema.
hi, i tried but had problems all over the place. She didn't have a keyboard, she just had voice transcription, which didn't work because she wasn't picking up the microphone. I tried to install some apk but I couldn't install it, it didn't have the file manager and the installation package. I couldn't fix a problem like this, I don't have the technical skills. My phone (S9) detected it as a Note9, it didn't have an IMAI code. I have now used a Pix*lexperi*nce. I will wait for the next update of this CostumRom.
 

VonnHansenn

Senior Member
Dec 13, 2020
90
81
Installed on Samsung Galaxy S9.
Latest version of TWRP

- Clean installation + Debloat.
- The installation was done on the third attempt, but everything works very well for now
THX !


Update: Unfortunately, my SFR (France) SIM card does not work. Not recognized.
 
Last edited:

tillward

Senior Member
Oct 29, 2013
350
84
London
hi, i tried but had problems all over the place. She didn't have a keyboard, she just had voice transcription, which didn't work because she wasn't picking up the microphone. I tried to install some apk but I couldn't install it, it didn't have the file manager and the installation package. I couldn't fix a problem like this, I don't have the technical skills. My phone (S9) detected it as a Note9, it didn't have an IMAI code. I have now used a Pix*lexperi*nce. I will wait for the next update of this CostumRom.

That's the exact issue I get with the rom for my S9, whereas the N version works great. I think due to not expanding a partition.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 9
    BREAKING News ! "Galaxy AI coming to Galaxy N9/S9 series alongside OneUI 6.1 and Noble ROM 4.1 next month! Stay tuned" as @AlexisXDA said in Telegram
    1
    hi guys thanks to the programmer of this rom
    I have various problems
    bluetooth headset I hear well but my voice is heard badly?
    problems with various apps such as the digital identity card tells me that the phone is not safe and does not let me continue?
    with aliexprees I can't upload photos when I reply to a seller he doesn't show them?
    How can I resolve Bluetooth security issues??

    For the sound tweak (and other), kindly use the Noble Kernel Manager, simply follow my setting except the Volume Control do it with your preference and or the Microphone settings.

    Screenshot_20240331_181059_Noble Kernel Manager.jpg


    If you're just installed to Noble and root your device, set your root setting on Magisk and add some module that you need to make all banking-app works.

    In Noble 4.0.5 it's already added bluetooth library patcher to fix some of bluetooth things, but idk why I still add the same magisk module manually bcs I think the noble-patch isn't work accurately.
    1
    Hi all,

    Just switched over to Noble 3.9 after many years on LineageOS. My country's 3G network shutdown forced my hand, but I'm amazed at how well this ROM works. A massive thank you to Alexis and everyone else who's contributed.

    Like others here, I had to use the BluetoothLibraryPatcher magisk module to get paired devices to stick, but otherwise the install was easy and straightforward.

    The only slight issue I've had is with RAM plus -- I've got it working, but only with 2Gb or 4Gb (my settings in SetEdit get overwritten after reboot (to "2048,4096" and "2,4") and the 6Gb and 8Gb options disappear from the RAM Plus screen). The SetEdit entries are correct (I've double-checked and set them twice now), and I've enabled the WRITE_SECURE_SETTINGS permission (and checked that it's present and enabled for SetEdit via AppManager). There's heaps of internal storage space available.

    Is there any way to get the larger RAM Plus sizes as an option? (Don't get me wrong, though -- an extra 4Gb is awesome!)

    Also, does anyone know if there's any way to allow music apps to set full screen album art on the lock screen? It seems an odd thing to be missing in One UI?

    Thanks again!
    1
    hi @AlexisXDA ,first thank you for developing this rom,you make s9 extend life🙂i have been using it from 2022 to now,see the S23 has new features "Bypass Charging support",will you transplant this function to this rom?i commonly used for navigation and gaming,thx for your efforts❤️
  • 101
    alex.png

    Disclaimer

    We are not responsable of any problems caused by root like tripped knox... When you flash something like this you may know about the risks you are going to find in!

    Always backup your phone before and after flashing TWRP custom recovery:

    In TWRP press BACKUP and select:
    System Image, Vendor Image, Boot Image, Data, Baseband and EFS
    and save your backup in your Internal Storage.


    1.png

    • SM-N96xF/FD/N, SM-G96xF/FD/N supported. Only Exynos, no Snapdragon support.
    • Based on official OneUI 6 S21 (system) + N10Lite (vendor) with February 2024 Security Patches.
    • Odexed, Hardly Debloated and tweaked for best performance and better battery.
    • MAKE YOUR ROM!
      AROMA INSTALLER allows you to setup NOBLE ROM as you really wish! Select what to DEBLOAT and what to INSTALL as you wish!
    • Choose one CSC from more than 100 available!
    • More than 50 apps that can be debloated more!
    • Choose which build.prop or csc mods you want
    • Choose between Magisk, KernelSU or No Root options
    • Choose RAM Compression Level
    • Bixby Button Remappable
    • Light Performance and High Performance modes unlocked in "Device Care"
    • Protect your battery option enabled in "Device Care"
    • DualSIM and MultiSIM switcher supported
    • Disabled RMM Lock.
    • Safetynet passes just by enabling zygisk!
    • Secure Folder and App Lock available
    • Call Recording support
    • Outdoor Mode available on Settings/Display
    • Fingerprint unlock and fingerprint gestures working
    • Photo Remaster, Object Eraser, Image Clipper supported
    • New portrait effects available
    • Adaptive Eye comfort shield and Extra Dim supported
    • Greatest Audio experience with our Dolby Atmos settings
    • Camera fully working (check bugs list for minor issues)
    • Night mode zoom on camera
    • Night mode on hyperlapse
    • Bixby Vision and Document Scan supported
    • AR Apps supported
    • Dolby Atmos supported
    • Samsung DEX supported, choose to run it directly in your phone's display (AROMA option)
    • Good Lock available for all countries
    • S23 Wallpapers pre-installed
    • iOS 16 or OneUI 6 emojis selectable in aroma.
    • OneUI 6 Apps supported (check OneUI 6 Apps Post for more)
    • And much more, don't worry if the rom size is big, it contains all you need ;).


    2.png



    3.png

    TWRP 3.7.0_9-0
    0. Make a Backup of EFS and of all your stuffs before proceeding
    1. Open TWRP by pressing volume up+ bixby + power buttons
    2. Press on "Install" and select Universal9810_Repartitioner https://xdaforums.com/attachments/universal9810_repartitioner-zip.5816841/
    3. Reboot to TWRP
    4. Press on "Wipe" and select "Format Data" then type "yes"
    5. Reboot again to TWRP
    6. Press on "Install" and select Universal9810_Cleaner https://xdaforums.com/attachments/universal9810_cleaner-zip.5809289/
    7. Reboot again to TWRP
    8. Press "Install" and select NOBLEROM zip
    9. Follow AROMA instruction and at the end of installation, reboot
    10. Enjoy Noble ROM



    4.png



    5.png



    6.png



    7.png


    26
    13
    8.png


    7.png

    Updated base to S21 February patches (FXAH)
    Updated GPU and HWC drivers
    Updated Magisk
    Updated kernel for better performance, improved vibration feedback
    Fixed document scan and text extraction
    Fixed missing network speed
    Fixed hdr fc in low light conditions (thx to @ananjaser1211)
    Fixed reboots caused by hotspot (thx to @ananjaser1211)
    Fixed vibration intensity in keyboard
    Added aroma option for Galaxy 2024 Bootanimation
    Added again fake enforcing support
    Removed vibration and kernel app options in AROMA
    Added Kernel Manager app by default
    Improved general performance


    We are still working on full enforcing but we got some good news. We managed to boot it but still not enough stable to be released, so wait for it in the next releases!


    3.png

    In order to prevent TWRP crash that make Magisk not installable, use this TWRP Patched: https://xdaforums.com/attachments/patch_twrp_xxtr-zip.5809969/
    If you notice the "failed to mount /omr" and "failed to mount /preload" they are common and not a real issue. You can easily solve this by wiping OMR and Preload in Wipe/Advanced Wipe menu


    If you have already done repartition skip to step 8
    Make a Backup of EFS and of all your stuffs before proceeding
    1. Open TWRP by pressing volume up+ bixby + power buttons
    2. Press on "Install" and select Universal9810_Repartitioner https://xdaforums.com/attachments/universal9810_repartitioner-zip.5816841/
    3. Reboot to TWRP
    4. Press on "Wipe" and select "Format Data" then type "yes"
    5. Reboot again to TWRP
    6. Press on "Install" and select Universal9810_Cleaner https://xdaforums.com/attachments/universal9810_cleaner-zip.5809289/
    7. Reboot again to TWRP
    8. Press "Install" and select NOBLEROM zip
    9. Follow AROMA instruction and at the end of installation
    10. Reboot and Enjoy Noble ROM

    2.png



    5.png





    VIDEO TUTORIAL ON HOW TO ENABLE RAM PLUS ON NOBLE 2.0+ IS HERE:

    10.png




    12
    NOBLE ROM 3.5 SCILLA IS ONLINE!
    Instagram REEL here: https://www.instagram.com/reel/Ct1Xc_kAkLv/?igshid=NjZiM2M3MzIxNA==

    CHANGELOG:
    Updated base to OneUI 5.1 S20 firm with June's security patches (HWED)
    Updated vendor base to N10Lite to June's base
    Updated iOS 16 Emojis
    Fixed BT audio issues
    Fixed Bixby Vision (unistall Bixby Vision Framework's updates and don't update it)
    Fixed Document Scan in camera
    Added new portrait effects in camera
    Added Light Performance Mode option and toggle
    Added AOD Clock Transition
    Added AROMA option for SELinux Fake Enforcing and Permissive
    Added AROMA Option for KernelSU Root Option
    Added AROMA Option for Green Screen Flickering FIX
    Improved touch input, general performance and battery life


    HOW TO INSTALL:
    Follow these steps carefully! CLEAN INSTALL ONLY!

    In order to prevent TWRP crash that make Magisk not installable, use this TWRP Patched: https://xdaforums.com/attachments/patch_twrp_xxtr-zip.5809969/
    If you notice the "failed to mount /omr" and "failed to mount /preload" they are common and not a real issue. You can easily solve this by wiping OMR and Preload in Wipe/Advanced Wipe menu

    TWRP 3.7.0_9-0
    0. Make a Backup of EFS and of all your stuffs before proceeding

    1. Open TWRP by pressing volume up+ bixby + power buttons
    2. Press on "Install" and select Universal9810_Repartitioner https://xdaforums.com/attachments/universal9810_repartitioner-zip.5816841/
    3. Reboot to TWRP
    4. Press on "Wipe" and select "Format Data" then type "yes"
    5. Reboot again to TWRP
    6. Press on "Install" and select Universal9810_Cleaner https://xdaforums.com/attachments/universal9810_cleaner-zip.5809289/

    7. Reboot again to TWRP
    8. Press "Install" and select NOBLEROM zip
    9. Follow AROMA instruction and at the end of installation, reboot
    10. Enjoy Noble ROM

    BUG LIST:
    Check this to know which bugs are currently on NOBLE ROM. This list will be constantly updated once we find new bugs or we fix new stuffs.



    DOWNLOAD LINKS:
    NOBLE ROM 3.5 SCILLA:

    OneDrive: https://1drv.ms/u/s!AqGdTk4hyeaFiLJnc0S1MDxLiBAKYQ?e=46Db5N
    MEGA: https://mega.nz/file/bRQnWS6C#1Qdm_OmNN_NOtEvYrfz4KtAL2qlbIiw4aAhHPjxJbjE
    MEDIAFIRE: https://www.mediafire.com/file/fjjwq6oohwhc6fg/NOBLEROM3.5_SCILLA.zip/file

    Google Drive: https://drive.google.com/file/d/176Whmt7lvJ0hgfzVDXPii9DnNlnYpfwK/view?usp=sharing


    VIDEO TUTORIAL ON HOW TO ENABLE RAM PLUS ON NOBLE 2.0+ IS HERE:

    TELEGRAM GROUP:

    TELEGRAM CHANNEL:

    FOLLOW ME ON INSTAGRAM: https://www.instagram.com/invites/contact/?i=wehmn6h8vftx&utm_content=ibotzda

    FOLLOW ME ON TWITTER:
    12
    NOBLE ROM 2.0 IS ONLINE!
    Hope you will enjoy! Clean install is hardly recommended!

    CHANGELOG:
    Inital Build for OneUI 4.0 FULL PORT
    Check this to know what's new on OneUI 4: https://telegra.ph/OneUI-4--Noble-ROM-20-Main-Changelog-01-29

    HOW TO INSTALL:
    Follow these steps carefully! CLEAN INSTALL is always RECOMMENDED!

    TWRP 3.6.0_9-1

    1. Open TWRP by pressing volume up+ bixby + power buttons
    2. Go in WIPE menu' and press ADVANCED WIPE
    3. Then select: system, vendor,odm, data, cache, dalvik and SWIPE TO WIPE
    4. Go back in TWRP menu' and press REBOOT, then press 'Recovery'
    5. After TWRP Reboot press 'Install' then select NOBLE ROM zip and SWIPE TO FLASH
    6. Follow AROMA instruction (FOR STARTERS: select NO DEBLOAT and CLEAN INSTALL options)

    7.Reboot System and Enjoy Noble ROM

    More and graphic infos here: https://www.instagram.com/p/COIQbO4sHfF/

    YouTube Video Review is coming, if you didn't understand how to flash this update or want to know more, just wait for it!

    BUG LIST:
    Check this to know which bugs are currently on NOBLE ROM 2.0. This list will be constantly updated once we find new bugs or we fix new stuffs.


    IMPORTANT NOTES:
    1. For STARTERS is important to select NO DEBLOAT option, in order to prevent issues with the ADVANCED DEBLOAT
    2. Don't update Accessibility App from Galaxy Store or you will loose Extra Dim function
    3. Disable HDR from Camera Settings to avoid back camera crash
    4. Keep your face far from front Camera to avoid camera crash


    DOWNLOAD LINK:
    NOBLE ROM 2.0: https://www.androidfilehost.com/?fid=17825722713688289941

    NOBLE ROM 2.0 FOR G960N, G965N, N960N: https://www.androidfilehost.com/?fid=17825722713688289859

    TELEGRAM GROUP:


    TELEGRAM CHANNEL:

    FOLLOW ME ON MY NEW INSTAGRAM's PROFILE: https://www.instagram.com/invites/contact/?i=wehmn6h8vftx&utm_content=ibotzda

    Follow me on Facebook: https://www.facebook.com/AlexisDevXDA/