[NOBLE ROM 3.4 SERRA OneUI 5.1 FULL PORT][05/23 Patches][19/05/2023][SM-N960F/FD/N--SM-G96xF/FD/N]

Search This thread

scar1ove

Member
Jan 22, 2023
15
0
Dex is working fine when used on a computer, but not when connected to hdmi. That's casting image over hdmi that doesn't work, as you can try to switch from casting the screen or dex in the settings, both won't work.
may i select aspect ratio on Screen mirroring?
16:9 works on Dex Mode only!
21:9 aspect ratio on screen mirroring with hdmi cable. how i cac set is 16:9 have a way for it?
 

no_nombre

New member
Jan 22, 2023
4
0
I'm successfully upgraded from 2.7 to 2.9. Everything works fine, but I can't find one feature - how to display Internet speed in status bar?
sJnsrGL.png

I had this feature on 2.7 without any 3rd party apps. But now on 2.9 I can't find this option neither in settigs, nor in Good Lock.
Any suggestions where does this option gone?
 

scar1ove

Member
Jan 22, 2023
15
0
I'm successfully upgraded from 2.7 to 2.9. Everything works fine, but I can't find one feature - how to display Internet speed in status bar?
sJnsrGL.png

I had this feature on 2.7 without any 3rd party apps. But now on 2.9 I can't find this option neither in settigs, nor in Good Lock.
Any suggestions where does this option gone?
Hello i installed 2.9 directly. With no debloat. Gear VR services not installed. Samsung DEX HDMI output not working. HDMI was work with Stock ROM. I do not see any video when i use output to tv. Dex mode is not work too. can you help me about it? how i can install dex services and Gear VR services.
 

scar1ove

Member
Jan 22, 2023
15
0
Dex is working fine when used on a computer, but not when connected to hdmi. That's casting image over hdmi that doesn't work, as you can try to switch from casting the screen or dex in the settings, both won't work.
HDMI TV out is not working. (no signal)
Samsung Gear VR is not working. when i plug to gear vr device do not starting install vr services. nothing happening.

SO I WILL DELETE THIS ROM because VR NOT WORKING!
HDMI OUTPUT NO SIGNAL.
 
Last edited by a moderator:

QuadCore_xRV

Senior Member
Jan 21, 2022
62
24
HDMI TV out is not working. (no signal)
Samsung Gear VR is not working. when i plug to gear vr device do not starting install vr services. nothing happening.

SO I WILL DELETE THIS ROM because VR NOT WORKING!
HDMI OUTPUT NO SIGNAL.
This rom is TRASH for me
Mate, you are being extremely rude to the rom maker, just because things are not working for you, does not mean it is trash. You need to remember that these rom makers owe you NOTHING. This is a community, yelling slander at people will not get you the help you want. Enjoy your android 10 since you clearly don't want 12.
 
  • Like
Reactions: Sundarganesh

zeroomhert

Senior Member
Dec 19, 2012
210
57
Roxas City
HDMI TV out is not working. (no signal)
Samsung Gear VR is not working. when i plug to gear vr device do not starting install vr services. nothing happening.

SO I WILL DELETE THIS ROM because VR NOT WORKING!
HDMI OUTPUT NO SIGNAL.
This rom is TRASH for me
This is just one of the reasons why you need to check the bugs list and read feedbacks first before installing the ROM. You don't need to install other ROMs and then complain if stuffs are not working on your end. Installing other ROMs means you're agreeing that you'll lose other features that are not present on the ROM's specific phone. If some apps are not present, maybe checking out Google Playstore and Galaxy Store and manually installing them is not a hard thing to do?! Remember that this is Note 10's ROM, so expect the unexpected as other features and apps are only optimized for Note 10 and not for Note 9.
 

UltraCenterHQ

Senior Member
Nov 14, 2022
77
26
I'm successfully upgraded from 2.7 to 2.9. Everything works fine, but I can't find one feature - how to display Internet speed in status bar?
sJnsrGL.png

I had this feature on 2.7 without any 3rd party apps. But now on 2.9 I can't find this option neither in settigs, nor in Good Lock.
Any suggestions where does this option gone?
You needed to enable the network speed option in the csc mods during installation
 
  • Like
Reactions: no_nombre

UltraCenterHQ

Senior Member
Nov 14, 2022
77
26
HDMI TV out is not working. (no signal)
Samsung Gear VR is not working. when i plug to gear vr device do not starting install vr services. nothing happening.

SO I WILL DELETE THIS ROM because VR NOT WORKING!
HDMI OUTPUT NO SIGNAL.
This rom is TRASH for me
Things like Dex and VR really don't work, because this is basically a ported note 10 rom
 

scar1ove

Member
Jan 22, 2023
15
0
This is just one of the reasons why you need to check the bugs list and read feedbacks first before installing the ROM. You don't need to install other ROMs and then complain if stuffs are not working on your end. Installing other ROMs means you're agreeing that you'll lose other features that are not present on the ROM's specific phone. If some apps are not present, maybe checking out Google Playstore and Galaxy Store and manually installing them is not a hard thing to do?! Remember that this is Note 10's ROM, so expect the unexpected as other features and apps are only optimized for Note 10 and not for Note 9.
I read Bug List before install. I know whats not working whats are working.
Samsung Note 10+ have VR services and HDMI output + DEX. note 9 have also.
I selected install Gear VR services and hdmi output specially on advanced debloat.
IF they made it included why not working? why they deleted this features on Note 10+ Rom.

I installed noble rom 4 times. First no debloat, after advanced debloat and i seelcted all features included. GEAR VR and HDMI output is my Most important features because i using note 9 on Steam VR games.
For what they deleted this features and do not have any data on bug list?

I like android 12 works nice on note 9 but i hate what for they delete basic feature on phone. and i asking to peoples in here anybody do not know about problems. I did not say bad thing about ROM maker.

i just lose long time with this rom last 2 days i tried all day for make ready my phone. i was installed many apk 4 times. result is same. Gear VR not have HDMI output and DEX mode not have with this rom. I turned back to Stock ROM everythink works now.

I do not like that things. If rom maker do not use VR or HDMI output. another peoples can use. They made it optional, you can select to install VR services or HDMI output already. But lie. Not have this services. They should fix it. or should text in bug list.
 
Last edited:

scar1ove

Member
Jan 22, 2023
15
0
Things like Dex and VR really don't work, because this is basically a ported note 10 rom
VR and DEX have basiccally on note10+ Also. Noble Rom have selction for VR and DEX also. but not working if you select or no. not important. They deleted that services specially i think. because anybody do not using vr or hdmi output in their opinion maybe
 

zhanfx

Member
Apr 23, 2011
5
0
VR and DEX have basiccally on note10+ Also. Noble Rom have selction for VR and DEX also. but not working if you select or no. not important. They deleted that services specially i think. because anybody do not using vr or hdmi output in their opinion maybe
just wondering the s-pen function in your phone is working ? also the secure folder ? if not try use the twrp version mention in the download section
 

QuadCore_xRV

Senior Member
Jan 21, 2022
62
24
This is not your business. I am Right abut my topic.
You are posting on a public forum about a FREE upgrade rom that the developer owes nothing to you. This is EVERYONES business since you posted it on a PUBLIC forum. Since you have nothing nice or useful to say, you can go away now. Leave. Don't come back. And no, you are not correct "abut" your "topic".
 

zeroomhert

Senior Member
Dec 19, 2012
210
57
Roxas City
I read Bug List before install. I know whats not working whats are working.
Samsung Note 10+ have VR services and HDMI output + DEX. note 9 have also.
I selected install Gear VR services and hdmi output specially on advanced debloat.
IF they made it included why not working? why they deleted this features on Note 10+ Rom.

I installed noble rom 4 times. First no debloat, after advanced debloat and i seelcted all features included. GEAR VR and HDMI output is my Most important features because i using note 9 on Steam VR games.
For what they deleted this features and do not have any data on bug list?

I like android 12 works nice on note 9 but i hate what for they delete basic feature on phone. and i asking to peoples in here anybody do not know about problems. I did not say bad thing about ROM maker.

i just lose long time with this rom last 2 days i tried all day for make ready my phone. i was installed many apk 4 times. result is same. Gear VR not have HDMI output and DEX mode not have with this rom. I turned back to Stock ROM everythink works now.

I do not like that things. If rom maker do not use VR or HDMI output. another peoples can use. They made it optional, you can select to install VR services or HDMI output already. But lie. Not have this services. They should fix it. or should text in bug list.
You know that this port is not open-source right? Meaning, you get what you see out of the box. The scripts included in the ported rom are for note 10 and not for note 9. In order to make an app or feature or services work for your phone, you need to edit/remake/add/delete some scripts/s to remap and match the functions of your phone. And that my friend can only be done on an open-source ported rom. Do you know why apps like samsung health won't function well on noble rom? Because it is optimized for note 10 even though note 9 has it. That is what I meant. Bear in mind that your phone reads SM-N770F/DS/DSM (something like that) and not SM-N960F/DS/N, meaning, the apps that will work are optimized for note 10. Lastly, did you check the galaxy store to see if there are updates for your VR and Dex? Because like find my phone feature, it won't work if you won't update the app in galaxy store.
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 10
    NOBLE ROM 3.4 SERRA IS ONLINE!
    Announcement REEL here: https://www.instagram.com/reel/CsbCB9YgY3X/?igshid=NjZiM2M3MzIxNA==

    CHANGELOG:
    Updated base to OneUI 5.1 S20 firm with May's security patches (HWD4)
    First build to support ENFORCE SELinux Status (NOTE9 ONLY)
    S9 and S9+ Supports Fake Enforcing by default
    Added Auto EFS Backup, will be saved in your internal storage (thx to @duhansysl)
    Added Front Cam Full Screen fix (this won't fix Front Cam force close) (thx to @duhansysl)
    Added AROMA Option for 'Low End Fast' Animations for fastest animations
    Downgraded Input Booster drivers in order to reduce input lag
    Improved Fingerprint Scanner performance
    Shamiko Magisk Module is now installed by default
    Other minor improvements for performance and battery life


    HOW TO INSTALL:
    Follow these steps carefully! CLEAN INSTALL ONLY!

    In order to prevent TWRP crash that make Magisk not installable, use this TWRP Patched: https://forum.xda-developers.com/attachments/patch_twrp_xxtr-zip.5809969/
    If you notice the "failed to mount /omr" and "failed to mount /preload" they are common and not a real issue. You can easily solve this by wiping OMR and Preload in Wipe/Advanced Wipe menu

    TWRP 3.7.0_9-0
    0. Make a Backup of EFS and of all your stuffs before proceeding

    1. Open TWRP by pressing volume up+ bixby + power buttons
    2. Press on "Install" and select Universal9810_Repartitioner https://forum.xda-developers.com/attachments/universal9810_repartitioner-zip.5816841/
    3. Reboot to TWRP
    4. Press on "Wipe" and select "Format Data" then type "yes"
    5. Reboot again to TWRP
    6. Press on "Install" and select Universal9810_Cleaner https://forum.xda-developers.com/attachments/universal9810_cleaner-zip.5809289/

    7. Reboot again to TWRP
    8. Press "Install" and select NOBLEROM zip
    9. Follow AROMA instruction and at the end of installation, reboot
    10. Enjoy Noble ROM

    BUG LIST:
    Check this to know which bugs are currently on NOBLE ROM. This list will be constantly updated once we find new bugs or we fix new stuffs.



    DOWNLOAD LINKS:
    NOBLE ROM 3.4 SERRA:

    OneDrive: https://1drv.ms/u/s!AqGdTk4hyeaFiLI-1CZMymfoJdJdKA?e=FgaTFA
    MEGA: https://mega.nz/file/CZBmEBib#ibp9NnzEq0o3JI7vuqinhwFnTo_MNoCmqJcCfOWRRsY
    MEDIAFIRE: https://www.mediafire.com/file/du74syh42vionue/NOBLEROM3.4_SERRA.zip/file

    Google Drive: https://drive.google.com/file/d/12nPsVfzs_gZ-yL0zQnyRTT1Dt83nKSTj/view?usp=share_link


    BOOTLOOP AND BLUETOOTH FIXES:

    VIDEO TUTORIAL ON HOW TO ENABLE RAM PLUS ON NOBLE 2.0+ IS HERE:

    TELEGRAM GROUP:

    TELEGRAM CHANNEL:

    FOLLOW ME ON INSTAGRAM: https://www.instagram.com/invites/contact/?i=wehmn6h8vftx&utm_content=ibotzda

    FOLLOW ME ON TWITTER:
    5
    If NOBLE ROM 3.4 SERRA is not booting, flash this and select "PERMISSIVE" option

    My guess is that N960F phones are booting enforcing SELinux at the moment

    If you are also having issues with Bluetooth not working in NOBLE ROM 3.4 SERRA just flash this through TWRP

    I'm sorry for these issues, hope you will enjoy Noble Rom update 🔥


    In order to improve Noble ROM's updates reliability we are launching "Noble Beta Program" 💥

    We are searching for people who have a pc and can send the logs we ask about. We are gonna share there "pre-release" versions of Noble ROMs

    If you are interested and wanna join the program please send me a private message on Telegram 💪
    2
    Hey developer, I got my bluetooth back by flashing the file above... it connects evething very well but when I do connect my earbuds, the music or any kind of audio or video doesn't play actually... it only plays with the external speaker... please help me regarding this issue :)
    Open developer options And turn off A2DP hardware offload
    1
    What is NOBLEROM2B-NVARIANT?
    I am on NOBLEROM2B ist work very well
    Nvariant is Korean-variant
    1
    Yes ... with my samsung watch 5 pro same problem..
    I reset my watch every restart...
    And unistall, install, clearcach, for a galaxy wearable app.
    Any help with this problem 😔
    Does someone have an issue where each time you restart your phone, watch 4 unpairs, and in order to connect back, you have to go through the whole reset, delete everything and do 1st boot setup?
    try to flash the Bluetooth zip by Alexis on page 250 of this thread and see if it is fixed
    if not then that is a bug within the ROM itself
  • 180
    alex.png

    Disclaimer

    We are not responsable of any problems caused by root like tripped knox... When you flash something like this you may know about the risks you are going to find in!

    Always backup your phone before and after flashing TWRP custom recovery:

    In TWRP press BACKUP and select:
    System Image, Vendor Image, Boot Image, Data, Baseband and EFS
    and save your backup in your Internal Storage.



    Description

    • SM-N96xF/FD/N, SM-G96xF/FD/N supported. Only Exynos, no Snapdragon support.
    • Based on official OneUI 5.1 S20 + N10Lite with May's Security Patches.
    • All OneUI 5 stuffs have been ported successfully
    • Odexed, Hardly Debloated and added some tweaks for best performance and better battery.
    • Added some tweaks in order to have the best smoothness and general performance!
    • Make your ROM! OUR aroma allows you to select everything you want to have on your phone in order to improve the user experience!
    • Remappable Bixby Button
    • Disabled RMM Lock.
    • Google Pay working (Hide it with Magisk)
    • Secure Folder working
    • Photo Remaster, Object Eraser and Extra Dim available
    • Improved zoom quality in gallery
    • Useful cards tab enabled in messages
    • Night mode zoom on camera.
    • Night mode on hyperlapse.
    • Enabled Dolby on Game.
    • Power key in notification panel.
    • Samsung App Lock.
    • iOS 16 Emoji's selectable in aroma.
    • And much more, don't worry if the rom size is big, it contains all you need ;).

    Known Bugs


    How to Install

    TWRP 3.7.0_9-0
    0. Make a Backup of EFS and of all your stuffs before proceeding
    1. Open TWRP by pressing volume up+ bixby + power buttons
    2. Press on "Install" and select Universal9810_Repartitioner https://forum.xda-developers.com/attachments/universal9810_repartitioner-zip.5816841/
    3. Reboot to TWRP
    4. Press on "Wipe" and select "Format Data" then type "yes"
    5. Reboot again to TWRP
    6. Press on "Install" and select Universal9810_Cleaner https://forum.xda-developers.com/attachments/universal9810_cleaner-zip.5809289/
    7. Reboot again to TWRP
    8. Press "Install" and select NOBLEROM zip
    9. Follow AROMA instruction and at the end of installation, reboot
    10. Enjoy Noble ROM

    Download Here


    Join the Community


    Follow me on


    Support Noble ROM

    35
    NOBLE ROM 2.0 IS ONLINE!
    Hope you will enjoy! Clean install is hardly recommended!

    CHANGELOG:
    Inital Build for OneUI 4.0 FULL PORT
    Check this to know what's new on OneUI 4: https://telegra.ph/OneUI-4--Noble-ROM-20-Main-Changelog-01-29

    HOW TO INSTALL:
    Follow these steps carefully! CLEAN INSTALL is always RECOMMENDED!

    TWRP 3.6.0_9-1

    1. Open TWRP by pressing volume up+ bixby + power buttons
    2. Go in WIPE menu' and press ADVANCED WIPE
    3. Then select: system, vendor,odm, data, cache, dalvik and SWIPE TO WIPE
    4. Go back in TWRP menu' and press REBOOT, then press 'Recovery'
    5. After TWRP Reboot press 'Install' then select NOBLE ROM zip and SWIPE TO FLASH
    6. Follow AROMA instruction (FOR STARTERS: select NO DEBLOAT and CLEAN INSTALL options)

    7.Reboot System and Enjoy Noble ROM

    More and graphic infos here: https://www.instagram.com/p/COIQbO4sHfF/

    BUG LIST:
    Check this to know which bugs are currently on NOBLE ROM 2.0. This list will be constantly updated once we find new bugs or we fix new stuffs.


    IMPORTANT NOTES:
    1. For STARTERS is important to select NO DEBLOAT option, in order to prevent issues with the ADVANCED DEBLOAT
    2. Don't update Accessibility App from Galaxy Store or you will loose Extra Dim function
    3. Disable HDR from Camera Settings to avoid back camera crash
    4. Keep your face far from front Camera to avoid camera crash


    DOWNLOAD LINK:
    NOBLE ROM 2.0: https://www.androidfilehost.com/?fid=17825722713688289941

    NOBLE ROM 2.0 FOR G960N, G965N, N960N: https://www.androidfilehost.com/?fid=17825722713688289859

    VIDEO REVIEW OF NOBLE ROM 2.0 IS NOW OUT ON OUR YOUTUBE CHANNEL:

    TELEGRAM GROUP:


    TELEGRAM CHANNEL:

    FOLLOW ME ON MY NEW INSTAGRAM's PROFILE: https://www.instagram.com/invites/contact/?i=wehmn6h8vftx&utm_content=ibotzda

    Follow me on Facebook: https://www.facebook.com/AlexisDevXDA/
    25
    NOBLE ROM 1.1 IS ONLINE!
    Hope you will enjoy! Clean install is recommended!

    CHANGELOG:
    Added S9 and S9+ support (S9 users have to renunce at bixby service)
    Fixed Photo Editor FC after update
    Fixed Game Launcher FC before update
    Fixed heart rate sensor
    Fixed sound loudness
    Fixed Biometrics Settings fc after setting new biometric lock
    Added Sound Alive missing modes
    Fixed installation message error "system not mounted" and symlinks errors
    Added new option in AROMA to choose which kind of debloat you wanna apply
    Removed Good Lock section in AROMA and put an option to install just Good Lock Launcher app
    Removed Chinese Smart Manager in aroma
    Removed not working camera modes
    Updated kernels
    Improved general stability and performance

    HOW TO INSTALL:
    Follow these steps carefully! CLEAN INSTALL is always RECOMMENDED!

    TWRP 3.3.1.1
    1. Open TWRP by pressing volume up+ bixby + power buttons
    2. Go in WIPE menu' and press ADVANCED WIPE
    3. Then select: system, vendor, data, cache, dalvik and SWIPE TO WIPE
    4. Go back in TWRP menu' and press INSTALL
    5. Then select NOBLE ROM zip and SWIPE TO CONFIRM FLASH
    6. Follow AROMA instruction (FOR STARTERS: select NO DEBLOAT option)
    7. REBOOT and enjoy NOBLE ROM!

    TWRP 3.5.x.x
    1. Open TWRP by pressing volume up+ bixby + power buttons
    2. Go in WIPE menu' and press ADVANCED WIPE
    3. Then select: system, vendor, data, cache, dalvik and SWIPE TO WIPE
    4. Go back in TWRP menu' and press INSTALL
    5. Then select NOBLE ROM zip and SWIPE TO CONFIRM FLASH
    6. Follow AROMA instruction (FOR STARTERS: select NO DEBLOAT option)
    7. If you try to reboot you will see 'NO OS INSTALLED' warning
    8. Go back WITHOUT REBOOTING and FLASH THE ROM AGAIN
    9. Then REBOOT and enjoy NOBLE ROM!

    More and graphic infos here: https://www.instagram.com/p/CM_3lWHsvUW/

    IMPORTANT NOTES:
    1. For STARTERS is important to select NO DEBLOAT option, in order to prevent issues with the
    ADVANCED DEBLOAT
    2. Is RECOMMENDED to use TWRP 3.3.1.1 with this build. DON'T COMPLAIN about this, I will get it fully working for newer TWRP as soon as I have enough time.
    3. Backup your phone before installing! In TWRP press BACKUP and select:
    System Image, Vendor Image, Boot Image, Data, Baseband and EFS
    and save your backup in your Internal Storage

    DOWNLOAD LINK:
    NOBLE ROM 1.1: https://www.androidfilehost.com/?fid=2188818919693772286
    CAMERA FIX ONLY FOR G960F/FD/N USERS: https://www.androidfilehost.com/?fid=2188818919693772295
    KERNEL FIX ONLY FOR G960F/FD/N USERS:

    TELEGRAM GROUP:

    FOLLOW ME ON MY NEW INSTAGRAM's PROFILE: https://www.instagram.com/invites/contact/?i=wehmn6h8vftx&utm_content=ibotzda

    Follow me on Facebook: https://www.facebook.com/AlexisDevXDA/
    24
    NOBLE ROM 1.7 IS ONLINE!
    Hope you will enjoy! Clean install is recommended!

    CHANGELOG:
    Updated base to N10+ OneUI 3.1.1 base with November's patches (FUJ1)
    Updated kernels and CSC
    Updated vendor to latest N10 Lite base
    Fixed soft reboot issue caused by updating apps
    Fixed usb settings greyed out
    Fixed fonts issues
    Fixed "SIM Card has changed" popup error
    OneUI 2.5 Camera put again by default
    Added an option in aroma to choose between Noble or WhiteWolf Kernel (by yarpin)
    Improved Perforamance
    Other minor Improvements

    HOW TO INSTALL:
    Follow these steps carefully! CLEAN INSTALL is always RECOMMENDED!

    TWRP 3.3.1.1
    1. Open TWRP by pressing volume up+ bixby + power buttons
    2. Go in WIPE menu' and press ADVANCED WIPE
    3. Then select: system, vendor, data, cache, dalvik and SWIPE TO WIPE
    4. Go back in TWRP menu' and press INSTALL
    5. Then select NOBLE ROM zip and SWIPE TO CONFIRM FLASH
    6. Follow AROMA instruction (FOR STARTERS: select NO DEBLOAT option)
    7. REBOOT and enjoy NOBLE ROM!

    TWRP 3.5.x.x
    1. Open TWRP by pressing volume up+ bixby + power buttons
    2. Go in WIPE menu' and press ADVANCED WIPE
    3. Then select: system, vendor, data, cache, dalvik and SWIPE TO WIPE
    4. Go back in TWRP menu' and press INSTALL
    5. Then select NOBLE ROM zip and SWIPE TO CONFIRM FLASH
    6. Follow AROMA instruction (FOR STARTERS: select NO DEBLOAT option)
    7. If you try to reboot you will see 'NO OS INSTALLED' warning
    8. Go back WITHOUT REBOOTING and FLASH THE ROM AGAIN
    9. Then REBOOT and enjoy NOBLE ROM!

    More and graphic infos here: https://www.instagram.com/p/CM_3lWHsvUW/

    IMPORTANT NOTES:
    1. As stated above, TWRP 3.3.1.0/1 is really recommended
    2. SM-G960N, SM-G965N and SM-N960N HAVE TO INSTALL the ROM zip with "ONLY_N_VARIANT" title
    3. Also CLEAN FLASH IS RECOMMENDED
    4. Don't update AOD apk from GALAXY STORE or you will get again "AOD CHARGING BUG"
    5. Don't update Photo Editor from GALAXY STORE

    DOWNLOAD LINK:
    NOBLE ROM 1.7: https://www.androidfilehost.com/?fid=7161016148664840459

    NOBLE ROM 1.7 FOR G960N, G965N, N960N: https://www.androidfilehost.com/?fid=7161016148664840460

    TELEGRAM GROUP:


    TELEGRAM CHANNEL:

    FOLLOW ME ON MY NEW INSTAGRAM's PROFILE: https://www.instagram.com/invites/contact/?i=wehmn6h8vftx&utm_content=ibotzda

    Follow me on Facebook: https://www.facebook.com/AlexisDevXDA/
    24
    NOBLE ROM 2.8 IS ONLINE!
    Hope you will enjoy! Dirty flash from NOBLE ROM 2.1+ is allowed! If you come from NOBLE 1.x, 2.0 or any other ROM please Clean Flash!

    CHANGELOG:
    Final release for Android 12 NOBLE ROM
    Ported new A12 HAL from N10Lite (this means better performance and battery) (thanks to @ananjaser1211)
    Fixed Front Cam FC
    Fixed HDR FC in low light conditions
    Fixed Filters in front camera (only for F VARIANT)
    Fixed OK Google (Google App Installer needed) (thanks to @ananjaser1211 )
    Fixed 3D Touch Home Button (thanks to @ananjaser1211 )
    Improved general performance and battery life

    KERNEL CHANGELOG:
    Boostings optimized for battery
    Wakelock blocker updated
    Morosound included


    HOW TO INSTALL:
    Follow these steps carefully!
    Dirty flash from NOBLE ROM 2.1+ is allowed! If you come from NOBLE 1.x, 2.0 or any other ROM please Clean Flash!

    DON'T DO ANY ADVANCED WIPE, JUST GO IN TWRP AND DIRECTLY FLASH THE ROM. IF YOU HAVE SOME ISSUES WITH INSTALLER JUST FLASH AGAIN THE ROM

    TWRP 3.6.1_9-0
    0. Make a Backup of EFS and of all your stuffs before proceeding

    1. Open TWRP by pressing volume up+ bixby + power buttons
    2. Press 'Install' then select NOBLE ROM zip and SWIPE TO FLASH
    3. Dirty flash from NOBLE ROM 2.1+ is allowed! If you come from NOBLE 1.x, 2.0 or any other ROM please Clean Flash!
    4. Follow AROMA instruction (FOR STARTERS: select NO DEBLOAT)

    5.Reboot System and Enjoy Noble ROM

    IF AFTER DIRTY FLASH YOU FIND SOME PROBLEMS, PLEASE CLEAN INSTALL

    More and graphic infos here: https://www.instagram.com/p/Cbm7Gros2Hf/?utm_medium=copy_link
    Video tutorial of how to correctly install Noble ROM is here:

    BUG LIST:
    Check this to know which bugs are currently on NOBLE ROM. This list will be constantly updated once we find new bugs or we fix new stuffs.


    IMPORTANT NOTES:
    1. For STARTERS is important to select NO DEBLOAT option, in order to prevent issues with the ADVANCED DEBLOAT
    2. Install Magisk App manually downloading it from here: https://github.com/topjohnwu/Magisk/releases/tag/v25.2
    3. Don't update Photo Editor from Galaxy Store, if you do it please unistall it to have it working again
    4. Don't update Accessibility from Galaxy Store or you will loose Extra Dim function

    DOWNLOAD LINKS:
    NOBLE ROM 2.8:

    OneDrive MIRROR: https://1drv.ms/u/s!AmNYN7PXcx7NjAUZuHgNaWZAcWd3?e=Vhcrk3
    MEGA: MEDIAFIRE: Google Drive MIRROR: https://drive.google.com/file/d/1fnGhKSVbTmh829ehzSx-BgGpWKGV9uUI/view?usp=share_link


    NOBLE ROM 2.8 FOR G960N, G965N, N960N:
    OneDrive MIRROR: https://1drv.ms/u/s!AqGdTk4hyeaFiLF72fR2zmPeGQqyjw?e=ybodEE
    MEGA: MEDIAFIRE: Google Drive MIRROR: https://drive.google.com/file/d/13_APB0BOG8iyk1F76uWvxxvhF9oT6c60/view?usp=share_link


    BIXBY AND AR APPS ADDONS FOR N VARIANT (flash after the ROM booted): https://www.androidfilehost.com/?fid=15664248565197181607

    VIDEO TUTORIAL ON HOW TO ENABLE RAM PLUS ON NOBLE 2.0+ IS HERE:

    TELEGRAM GROUP:


    TELEGRAM CHANNEL:

    FOLLOW ME ON MY NEW INSTAGRAM's PROFILE: https://www.instagram.com/invites/contact/?i=wehmn6h8vftx&utm_content=ibotzda

    Follow me on Facebook: https://www.facebook.com/AlexisDevXDA/