[NOBLE ROM 3.4 SERRA OneUI 5.1 FULL PORT][05/23 Patches][19/05/2023][SM-N960F/FD/N--SM-G96xF/FD/N]

Search This thread

Fragin 11

Senior Member
hello.
I have installed the noble rom 3.1 following the instructions and the camera does not start, it gives an error. I have reinstalled noble rom 3.2 following the instructions and installing after restarting the system the samsung camera rom, and nothing the camera still does not work, it does not start, it gives a serious error. I have a samsung s9 plus,
Is there any solution? Before I had the noble rom 2.2 and it worked except for facial recognition.
Greetings
same thing to me and also random reboot

Did you guys follow these instructions from Alexis?

Noble 3.2 comes out of the box WITHOUT Samsung Camera pre-installed!
This because it was causing some errors after dirty flash.

So, in order to DIRTY FLASH Noble 3.2 you have to:

1) Install the ROM zip
2) Reboot to system
3) Reboot again to TWRP

4) Flash Samsung Camera Installer
 
  • Like
Reactions: ThatPhan

G0ldenBoY-87

New member
Mar 29, 2023
3
0
Hello, i found my problem not in the buglist.

I am the only one? A VPN-Connection is not possible.

Under Connections // More Connection details // crash
 

diegodonamara

Member
Mar 29, 2023
7
5
Anyone fix green screen flickering ? It works well only when outdoor mode is enabled and than with oled saver slider reduced brightness to normal point... Is it way to set outdoor mode to works permanent or something another solution for green screen flickering? Thanks for help everyone...
 
  • Like
Reactions: Suraj fernando
Oct 5, 2015
35
10
Anyone fix green screen flickering ? It works well only when outdoor mode is enabled and than with oled saver slider reduced brightness to normal point... Is it way to set outdoor mode to works permanent or something another solution for green screen flickering? Thanks for help everyone..
Anyone fix green screen flickering ? It works well only when outdoor mode is enabled and than with oled saver slider reduced brightness to normal point... Is it way to set outdoor mode to works permanent or something another solution for green screen flickering? Thanks for help everyone...
same problem here 😔
 
Oct 5, 2015
35
10
Anyone fix green screen flickering ? It works well only when outdoor mode is enabled and than with oled saver slider reduced brightness to normal point... Is it way to set outdoor mode to works permanent or something another solution for green screen flickering? Thanks for help everyone...
I wrote a post about this and there is a fix but not for samsung roms this only works for aosp roms this will help you 👇

 
Oct 5, 2015
35
10
Anyone fix green screen flickering ? It works well only when outdoor mode is enabled and than with oled saver slider reduced brightness to normal point... Is it way to set outdoor mode to works permanent or something another solution for green screen flickering? Thanks for help everyone...
and also there is way to fix this on samsung roms but its not stable. if you want to know i can explain download high brightness mode and give root permission. Then make everything like this screenshot and also i manually unplugged the light sensor because when it hits the light its automatically turns off the HBM.




SmartSelect_20230330_051816_One UI Home.jpg


SmartSelect_20230330_052109_High Brightness Mode.jpg
 
  • Like
Reactions: diegodonamara

diegodonamara

Member
Mar 29, 2023
7
5
and also there is way to fix this on samsung roms but its not stable. if you want to know i can explain download high brightness mode and give root permission. Then make everything like this screenshot and also i manually unplugged the light sensor because when it hits the light its automatically turns off the HBM.




View attachment 5875839

View attachment 5875841
I did just like that...installed HBM and than remap my side button to manual activate HBM when power on my display...
 
  • Like
Reactions: Suraj fernando

diegodonamara

Member
Mar 29, 2023
7
5
Is your problem solved now ?
Also you can add a button on notification pannel shortcut View attachment 5876359
Thanks for help my friend...now my phone is alive again...not like before with samsung nonsence software bug...my aod dont work but I can live without that...most important is that display works like before...no damage flex cabel or oled burn in like other says nonsence...it is just software (drivers) bug and I am sure that real pros here on xda can fix it...
 
  • Like
Reactions: Suraj fernando
Oct 5, 2015
35
10
Thanks for help my friend...now my phone is alive again...not like before with samsung nonsence software bug...my aod dont work but I can live without that...most important is that display works like before...no damage flex cabel or oled burn in like other says nonsence...it is just software (drivers) bug and I am sure that real pros here on xda can fix it...
The problem is display flex. To fix this issue permanently, only way is to change display flex or change display. Other than that you can still use this trick. GG❤️
 
Oct 5, 2015
35
10
Do you know guys is there edge menu in this rom and how can I activate it?
My phone is S9+ G965F
Make sure you choosed that option on aroma installer and maybe its a Debloat issue.
And the answer is edge pannel is working 100%
 

Attachments

  • Screenshot_20230331_023752_One UI Home.jpg
    Screenshot_20230331_023752_One UI Home.jpg
    1.3 MB · Views: 46
  • Screenshot_20230331_023810_Edge panels.jpg
    Screenshot_20230331_023810_Edge panels.jpg
    148.8 KB · Views: 45
Last edited:
  • Like
Reactions: sasho_purata

Top Liked Posts

  • There are no posts matching your filters.
  • 10
    NOBLE ROM 3.4 SERRA IS ONLINE!
    Announcement REEL here: https://www.instagram.com/reel/CsbCB9YgY3X/?igshid=NjZiM2M3MzIxNA==

    CHANGELOG:
    Updated base to OneUI 5.1 S20 firm with May's security patches (HWD4)
    First build to support ENFORCE SELinux Status (NOTE9 ONLY)
    S9 and S9+ Supports Fake Enforcing by default
    Added Auto EFS Backup, will be saved in your internal storage (thx to @duhansysl)
    Added Front Cam Full Screen fix (this won't fix Front Cam force close) (thx to @duhansysl)
    Added AROMA Option for 'Low End Fast' Animations for fastest animations
    Downgraded Input Booster drivers in order to reduce input lag
    Improved Fingerprint Scanner performance
    Shamiko Magisk Module is now installed by default
    Other minor improvements for performance and battery life


    HOW TO INSTALL:
    Follow these steps carefully! CLEAN INSTALL ONLY!

    In order to prevent TWRP crash that make Magisk not installable, use this TWRP Patched: https://forum.xda-developers.com/attachments/patch_twrp_xxtr-zip.5809969/
    If you notice the "failed to mount /omr" and "failed to mount /preload" they are common and not a real issue. You can easily solve this by wiping OMR and Preload in Wipe/Advanced Wipe menu

    TWRP 3.7.0_9-0
    0. Make a Backup of EFS and of all your stuffs before proceeding

    1. Open TWRP by pressing volume up+ bixby + power buttons
    2. Press on "Install" and select Universal9810_Repartitioner https://forum.xda-developers.com/attachments/universal9810_repartitioner-zip.5816841/
    3. Reboot to TWRP
    4. Press on "Wipe" and select "Format Data" then type "yes"
    5. Reboot again to TWRP
    6. Press on "Install" and select Universal9810_Cleaner https://forum.xda-developers.com/attachments/universal9810_cleaner-zip.5809289/

    7. Reboot again to TWRP
    8. Press "Install" and select NOBLEROM zip
    9. Follow AROMA instruction and at the end of installation, reboot
    10. Enjoy Noble ROM

    BUG LIST:
    Check this to know which bugs are currently on NOBLE ROM. This list will be constantly updated once we find new bugs or we fix new stuffs.



    DOWNLOAD LINKS:
    NOBLE ROM 3.4 SERRA:

    OneDrive: https://1drv.ms/u/s!AqGdTk4hyeaFiLI-1CZMymfoJdJdKA?e=FgaTFA
    MEGA: https://mega.nz/file/CZBmEBib#ibp9NnzEq0o3JI7vuqinhwFnTo_MNoCmqJcCfOWRRsY
    MEDIAFIRE: https://www.mediafire.com/file/du74syh42vionue/NOBLEROM3.4_SERRA.zip/file

    Google Drive: https://drive.google.com/file/d/12nPsVfzs_gZ-yL0zQnyRTT1Dt83nKSTj/view?usp=share_link


    BOOTLOOP AND BLUETOOTH FIXES:

    VIDEO TUTORIAL ON HOW TO ENABLE RAM PLUS ON NOBLE 2.0+ IS HERE:

    TELEGRAM GROUP:

    TELEGRAM CHANNEL:

    FOLLOW ME ON INSTAGRAM: https://www.instagram.com/invites/contact/?i=wehmn6h8vftx&utm_content=ibotzda

    FOLLOW ME ON TWITTER:
    5
    If NOBLE ROM 3.4 SERRA is not booting, flash this and select "PERMISSIVE" option

    My guess is that N960F phones are booting enforcing SELinux at the moment

    If you are also having issues with Bluetooth not working in NOBLE ROM 3.4 SERRA just flash this through TWRP

    I'm sorry for these issues, hope you will enjoy Noble Rom update 🔥


    In order to improve Noble ROM's updates reliability we are launching "Noble Beta Program" 💥

    We are searching for people who have a pc and can send the logs we ask about. We are gonna share there "pre-release" versions of Noble ROMs

    If you are interested and wanna join the program please send me a private message on Telegram 💪
    2
    Hey developer, I got my bluetooth back by flashing the file above... it connects evething very well but when I do connect my earbuds, the music or any kind of audio or video doesn't play actually... it only plays with the external speaker... please help me regarding this issue :)
    Open developer options And turn off A2DP hardware offload
    1
    v3.4 bluetooth not work, please help to fix it. thanks
    Flash Bluetooth library twrp version
    1
    Does someone have an issue where each time you restart your phone, watch 4 unpairs, and in order to connect back, you have to go through the whole reset, delete everything and do 1st boot setup?

    Yes ... with my samsung watch 5 pro same problem..
    I reset my watch every restart...
    And unistall, install, clearcach, for a galaxy wearable app.
    Any help with this problem 😔
    Guys, used to have this long time ago with Gear S3 when I first started using custom Roms with Samsung phones. I my case, this was because after every restart, it was loosing the previous bluetooth connections. The solution I have been using ever since (up to Galaxy Watch 4) is to flash Bluetooth Library Patcher thanks to 3arthur6. Search in the Note 9 Themes. apps and mods in this forum. Beware of the special instructions for Galaxy Watches. I use the TWRP method for Android 12L or below. Straight forward.
  • 180
    alex.png

    Disclaimer

    We are not responsable of any problems caused by root like tripped knox... When you flash something like this you may know about the risks you are going to find in!

    Always backup your phone before and after flashing TWRP custom recovery:

    In TWRP press BACKUP and select:
    System Image, Vendor Image, Boot Image, Data, Baseband and EFS
    and save your backup in your Internal Storage.



    Description

    • SM-N96xF/FD/N, SM-G96xF/FD/N supported. Only Exynos, no Snapdragon support.
    • Based on official OneUI 5.1 S20 + N10Lite with May's Security Patches.
    • All OneUI 5 stuffs have been ported successfully
    • Odexed, Hardly Debloated and added some tweaks for best performance and better battery.
    • Added some tweaks in order to have the best smoothness and general performance!
    • Make your ROM! OUR aroma allows you to select everything you want to have on your phone in order to improve the user experience!
    • Remappable Bixby Button
    • Disabled RMM Lock.
    • Google Pay working (Hide it with Magisk)
    • Secure Folder working
    • Photo Remaster, Object Eraser and Extra Dim available
    • Improved zoom quality in gallery
    • Useful cards tab enabled in messages
    • Night mode zoom on camera.
    • Night mode on hyperlapse.
    • Enabled Dolby on Game.
    • Power key in notification panel.
    • Samsung App Lock.
    • iOS 16 Emoji's selectable in aroma.
    • And much more, don't worry if the rom size is big, it contains all you need ;).

    Known Bugs


    How to Install

    TWRP 3.7.0_9-0
    0. Make a Backup of EFS and of all your stuffs before proceeding
    1. Open TWRP by pressing volume up+ bixby + power buttons
    2. Press on "Install" and select Universal9810_Repartitioner https://forum.xda-developers.com/attachments/universal9810_repartitioner-zip.5816841/
    3. Reboot to TWRP
    4. Press on "Wipe" and select "Format Data" then type "yes"
    5. Reboot again to TWRP
    6. Press on "Install" and select Universal9810_Cleaner https://forum.xda-developers.com/attachments/universal9810_cleaner-zip.5809289/
    7. Reboot again to TWRP
    8. Press "Install" and select NOBLEROM zip
    9. Follow AROMA instruction and at the end of installation, reboot
    10. Enjoy Noble ROM

    Download Here


    Join the Community


    Follow me on


    Support Noble ROM

    35
    NOBLE ROM 2.0 IS ONLINE!
    Hope you will enjoy! Clean install is hardly recommended!

    CHANGELOG:
    Inital Build for OneUI 4.0 FULL PORT
    Check this to know what's new on OneUI 4: https://telegra.ph/OneUI-4--Noble-ROM-20-Main-Changelog-01-29

    HOW TO INSTALL:
    Follow these steps carefully! CLEAN INSTALL is always RECOMMENDED!

    TWRP 3.6.0_9-1

    1. Open TWRP by pressing volume up+ bixby + power buttons
    2. Go in WIPE menu' and press ADVANCED WIPE
    3. Then select: system, vendor,odm, data, cache, dalvik and SWIPE TO WIPE
    4. Go back in TWRP menu' and press REBOOT, then press 'Recovery'
    5. After TWRP Reboot press 'Install' then select NOBLE ROM zip and SWIPE TO FLASH
    6. Follow AROMA instruction (FOR STARTERS: select NO DEBLOAT and CLEAN INSTALL options)

    7.Reboot System and Enjoy Noble ROM

    More and graphic infos here: https://www.instagram.com/p/COIQbO4sHfF/

    BUG LIST:
    Check this to know which bugs are currently on NOBLE ROM 2.0. This list will be constantly updated once we find new bugs or we fix new stuffs.


    IMPORTANT NOTES:
    1. For STARTERS is important to select NO DEBLOAT option, in order to prevent issues with the ADVANCED DEBLOAT
    2. Don't update Accessibility App from Galaxy Store or you will loose Extra Dim function
    3. Disable HDR from Camera Settings to avoid back camera crash
    4. Keep your face far from front Camera to avoid camera crash


    DOWNLOAD LINK:
    NOBLE ROM 2.0: https://www.androidfilehost.com/?fid=17825722713688289941

    NOBLE ROM 2.0 FOR G960N, G965N, N960N: https://www.androidfilehost.com/?fid=17825722713688289859

    VIDEO REVIEW OF NOBLE ROM 2.0 IS NOW OUT ON OUR YOUTUBE CHANNEL:

    TELEGRAM GROUP:


    TELEGRAM CHANNEL:

    FOLLOW ME ON MY NEW INSTAGRAM's PROFILE: https://www.instagram.com/invites/contact/?i=wehmn6h8vftx&utm_content=ibotzda

    Follow me on Facebook: https://www.facebook.com/AlexisDevXDA/
    25
    NOBLE ROM 1.1 IS ONLINE!
    Hope you will enjoy! Clean install is recommended!

    CHANGELOG:
    Added S9 and S9+ support (S9 users have to renunce at bixby service)
    Fixed Photo Editor FC after update
    Fixed Game Launcher FC before update
    Fixed heart rate sensor
    Fixed sound loudness
    Fixed Biometrics Settings fc after setting new biometric lock
    Added Sound Alive missing modes
    Fixed installation message error "system not mounted" and symlinks errors
    Added new option in AROMA to choose which kind of debloat you wanna apply
    Removed Good Lock section in AROMA and put an option to install just Good Lock Launcher app
    Removed Chinese Smart Manager in aroma
    Removed not working camera modes
    Updated kernels
    Improved general stability and performance

    HOW TO INSTALL:
    Follow these steps carefully! CLEAN INSTALL is always RECOMMENDED!

    TWRP 3.3.1.1
    1. Open TWRP by pressing volume up+ bixby + power buttons
    2. Go in WIPE menu' and press ADVANCED WIPE
    3. Then select: system, vendor, data, cache, dalvik and SWIPE TO WIPE
    4. Go back in TWRP menu' and press INSTALL
    5. Then select NOBLE ROM zip and SWIPE TO CONFIRM FLASH
    6. Follow AROMA instruction (FOR STARTERS: select NO DEBLOAT option)
    7. REBOOT and enjoy NOBLE ROM!

    TWRP 3.5.x.x
    1. Open TWRP by pressing volume up+ bixby + power buttons
    2. Go in WIPE menu' and press ADVANCED WIPE
    3. Then select: system, vendor, data, cache, dalvik and SWIPE TO WIPE
    4. Go back in TWRP menu' and press INSTALL
    5. Then select NOBLE ROM zip and SWIPE TO CONFIRM FLASH
    6. Follow AROMA instruction (FOR STARTERS: select NO DEBLOAT option)
    7. If you try to reboot you will see 'NO OS INSTALLED' warning
    8. Go back WITHOUT REBOOTING and FLASH THE ROM AGAIN
    9. Then REBOOT and enjoy NOBLE ROM!

    More and graphic infos here: https://www.instagram.com/p/CM_3lWHsvUW/

    IMPORTANT NOTES:
    1. For STARTERS is important to select NO DEBLOAT option, in order to prevent issues with the
    ADVANCED DEBLOAT
    2. Is RECOMMENDED to use TWRP 3.3.1.1 with this build. DON'T COMPLAIN about this, I will get it fully working for newer TWRP as soon as I have enough time.
    3. Backup your phone before installing! In TWRP press BACKUP and select:
    System Image, Vendor Image, Boot Image, Data, Baseband and EFS
    and save your backup in your Internal Storage

    DOWNLOAD LINK:
    NOBLE ROM 1.1: https://www.androidfilehost.com/?fid=2188818919693772286
    CAMERA FIX ONLY FOR G960F/FD/N USERS: https://www.androidfilehost.com/?fid=2188818919693772295
    KERNEL FIX ONLY FOR G960F/FD/N USERS:

    TELEGRAM GROUP:

    FOLLOW ME ON MY NEW INSTAGRAM's PROFILE: https://www.instagram.com/invites/contact/?i=wehmn6h8vftx&utm_content=ibotzda

    Follow me on Facebook: https://www.facebook.com/AlexisDevXDA/
    24
    NOBLE ROM 1.7 IS ONLINE!
    Hope you will enjoy! Clean install is recommended!

    CHANGELOG:
    Updated base to N10+ OneUI 3.1.1 base with November's patches (FUJ1)
    Updated kernels and CSC
    Updated vendor to latest N10 Lite base
    Fixed soft reboot issue caused by updating apps
    Fixed usb settings greyed out
    Fixed fonts issues
    Fixed "SIM Card has changed" popup error
    OneUI 2.5 Camera put again by default
    Added an option in aroma to choose between Noble or WhiteWolf Kernel (by yarpin)
    Improved Perforamance
    Other minor Improvements

    HOW TO INSTALL:
    Follow these steps carefully! CLEAN INSTALL is always RECOMMENDED!

    TWRP 3.3.1.1
    1. Open TWRP by pressing volume up+ bixby + power buttons
    2. Go in WIPE menu' and press ADVANCED WIPE
    3. Then select: system, vendor, data, cache, dalvik and SWIPE TO WIPE
    4. Go back in TWRP menu' and press INSTALL
    5. Then select NOBLE ROM zip and SWIPE TO CONFIRM FLASH
    6. Follow AROMA instruction (FOR STARTERS: select NO DEBLOAT option)
    7. REBOOT and enjoy NOBLE ROM!

    TWRP 3.5.x.x
    1. Open TWRP by pressing volume up+ bixby + power buttons
    2. Go in WIPE menu' and press ADVANCED WIPE
    3. Then select: system, vendor, data, cache, dalvik and SWIPE TO WIPE
    4. Go back in TWRP menu' and press INSTALL
    5. Then select NOBLE ROM zip and SWIPE TO CONFIRM FLASH
    6. Follow AROMA instruction (FOR STARTERS: select NO DEBLOAT option)
    7. If you try to reboot you will see 'NO OS INSTALLED' warning
    8. Go back WITHOUT REBOOTING and FLASH THE ROM AGAIN
    9. Then REBOOT and enjoy NOBLE ROM!

    More and graphic infos here: https://www.instagram.com/p/CM_3lWHsvUW/

    IMPORTANT NOTES:
    1. As stated above, TWRP 3.3.1.0/1 is really recommended
    2. SM-G960N, SM-G965N and SM-N960N HAVE TO INSTALL the ROM zip with "ONLY_N_VARIANT" title
    3. Also CLEAN FLASH IS RECOMMENDED
    4. Don't update AOD apk from GALAXY STORE or you will get again "AOD CHARGING BUG"
    5. Don't update Photo Editor from GALAXY STORE

    DOWNLOAD LINK:
    NOBLE ROM 1.7: https://www.androidfilehost.com/?fid=7161016148664840459

    NOBLE ROM 1.7 FOR G960N, G965N, N960N: https://www.androidfilehost.com/?fid=7161016148664840460

    TELEGRAM GROUP:


    TELEGRAM CHANNEL:

    FOLLOW ME ON MY NEW INSTAGRAM's PROFILE: https://www.instagram.com/invites/contact/?i=wehmn6h8vftx&utm_content=ibotzda

    Follow me on Facebook: https://www.facebook.com/AlexisDevXDA/
    24
    NOBLE ROM 2.8 IS ONLINE!
    Hope you will enjoy! Dirty flash from NOBLE ROM 2.1+ is allowed! If you come from NOBLE 1.x, 2.0 or any other ROM please Clean Flash!

    CHANGELOG:
    Final release for Android 12 NOBLE ROM
    Ported new A12 HAL from N10Lite (this means better performance and battery) (thanks to @ananjaser1211)
    Fixed Front Cam FC
    Fixed HDR FC in low light conditions
    Fixed Filters in front camera (only for F VARIANT)
    Fixed OK Google (Google App Installer needed) (thanks to @ananjaser1211 )
    Fixed 3D Touch Home Button (thanks to @ananjaser1211 )
    Improved general performance and battery life

    KERNEL CHANGELOG:
    Boostings optimized for battery
    Wakelock blocker updated
    Morosound included


    HOW TO INSTALL:
    Follow these steps carefully!
    Dirty flash from NOBLE ROM 2.1+ is allowed! If you come from NOBLE 1.x, 2.0 or any other ROM please Clean Flash!

    DON'T DO ANY ADVANCED WIPE, JUST GO IN TWRP AND DIRECTLY FLASH THE ROM. IF YOU HAVE SOME ISSUES WITH INSTALLER JUST FLASH AGAIN THE ROM

    TWRP 3.6.1_9-0
    0. Make a Backup of EFS and of all your stuffs before proceeding

    1. Open TWRP by pressing volume up+ bixby + power buttons
    2. Press 'Install' then select NOBLE ROM zip and SWIPE TO FLASH
    3. Dirty flash from NOBLE ROM 2.1+ is allowed! If you come from NOBLE 1.x, 2.0 or any other ROM please Clean Flash!
    4. Follow AROMA instruction (FOR STARTERS: select NO DEBLOAT)

    5.Reboot System and Enjoy Noble ROM

    IF AFTER DIRTY FLASH YOU FIND SOME PROBLEMS, PLEASE CLEAN INSTALL

    More and graphic infos here: https://www.instagram.com/p/Cbm7Gros2Hf/?utm_medium=copy_link
    Video tutorial of how to correctly install Noble ROM is here:

    BUG LIST:
    Check this to know which bugs are currently on NOBLE ROM. This list will be constantly updated once we find new bugs or we fix new stuffs.


    IMPORTANT NOTES:
    1. For STARTERS is important to select NO DEBLOAT option, in order to prevent issues with the ADVANCED DEBLOAT
    2. Install Magisk App manually downloading it from here: https://github.com/topjohnwu/Magisk/releases/tag/v25.2
    3. Don't update Photo Editor from Galaxy Store, if you do it please unistall it to have it working again
    4. Don't update Accessibility from Galaxy Store or you will loose Extra Dim function

    DOWNLOAD LINKS:
    NOBLE ROM 2.8:

    OneDrive MIRROR: https://1drv.ms/u/s!AmNYN7PXcx7NjAUZuHgNaWZAcWd3?e=Vhcrk3
    MEGA: MEDIAFIRE: Google Drive MIRROR: https://drive.google.com/file/d/1fnGhKSVbTmh829ehzSx-BgGpWKGV9uUI/view?usp=share_link


    NOBLE ROM 2.8 FOR G960N, G965N, N960N:
    OneDrive MIRROR: https://1drv.ms/u/s!AqGdTk4hyeaFiLF72fR2zmPeGQqyjw?e=ybodEE
    MEGA: MEDIAFIRE: Google Drive MIRROR: https://drive.google.com/file/d/13_APB0BOG8iyk1F76uWvxxvhF9oT6c60/view?usp=share_link


    BIXBY AND AR APPS ADDONS FOR N VARIANT (flash after the ROM booted): https://www.androidfilehost.com/?fid=15664248565197181607

    VIDEO TUTORIAL ON HOW TO ENABLE RAM PLUS ON NOBLE 2.0+ IS HERE:

    TELEGRAM GROUP:


    TELEGRAM CHANNEL:

    FOLLOW ME ON MY NEW INSTAGRAM's PROFILE: https://www.instagram.com/invites/contact/?i=wehmn6h8vftx&utm_content=ibotzda

    Follow me on Facebook: https://www.facebook.com/AlexisDevXDA/