[NOBLE ROM 3.7.1 CALABRIA OneUI 5.1.1 FULL PORT][09/23 Patches][18/09/2023][SM-N960F/FD/N--SM-G96xF/FD/N]

Search This thread

AssoorA

Member
Mar 17, 2023
8
1
Yes ... with my samsung watch 5 pro same problem..
I reset my watch every restart...
And unistall, install, clearcach, for a galaxy wearable app.
Any help with this problem 😔
Does someone have an issue where each time you restart your phone, watch 4 unpairs, and in order to connect back, you have to go through the whole reset, delete everything and do 1st boot setup?
try to flash the Bluetooth zip by Alexis on page 250 of this thread and see if it is fixed
if not then that is a bug within the ROM itself
 
  • Like
Reactions: sasho_purata
NOBLE ROM 1.5 EST EN LIGNE !
J'espère que vous apprécierez! Une installation propre est recommandée !

JOURNAL DES MODIFICATIONS :
Base mise à jour vers la base N10 + avec les correctifs de juillet (FUF5)
Noyaux et CSC mis à jour
Caméra frontale ultra large fixe
Mise au point en direct arrière améliorée
Amélioration des performances globales de la caméra
Amélioration de la qualité sonore et de la qualité des microphones
Amélioration de la gestion de la RAM et de la gestion des processus en arrière-plan
Morosound supprimé
Mise à jour du micrologiciel et des bibliothèques de l'appareil photo
Bibliothèques de sons mises à jour
Ajout de l'apk Patched Dual Apps (pourrait toujours provoquer une boucle de démarrage pour quelqu'un)
Autres améliorations mineures sous le capot

COMMENT INSTALLER:
Suivez attentivement ces étapes ! L'INSTALLATION PROPRE est toujours RECOMMANDÉE !

TWRP 3.3.1.1
1. Ouvrez TWRP en appuyant sur les boutons d'augmentation du volume + bixby + d'alimentation
2. Allez dans le menu WIPE ' et appuyez sur WIPE AVANCÉ
3. Sélectionnez ensuite : système, fournisseur, données, cache, dalvik et GLISSER POUR EFFACER
4. Retournez dans le menu TWRP' et appuyez sur INSTALLER
5. Sélectionnez ensuite NOBLE ROM zip et GLISSEZ POUR CONFIRMER FLASH
6. Suivez les instructions AROMA ( POUR LES DÉBUTANTS : sélectionnez l'option NO DEBLOAT )
7. REDÉMARREZ et profitez de NOBLE ROM !

TWRP 3.5.xx
1. Ouvrez TWRP en appuyant sur les boutons d'augmentation du volume + bixby + d'alimentation
2. Allez dans le menu WIPE ' et appuyez sur WIPE AVANCÉ
3. Sélectionnez ensuite : système, fournisseur, données, cache, dalvik et GLISSER POUR EFFACER
4. Retournez dans le menu TWRP' et appuyez sur INSTALLER
5. Sélectionnez ensuite NOBLE ROM zip et GLISSEZ POUR CONFIRMER FLASH
6. Suivez les instructions AROMA ( POUR LES DÉBUTANTS : sélectionnez l'option NO DEBLOAT )
7. Si vous essayez de redémarrer, vous verrez l'avertissement ' NO OS INSTALLED'
8. Revenez en arrière SANS REDÉMARRER et FLASH LA ROM ENCORE
9. Redémarrez ensuite et profitez de NOBLE ROM !

Plus d'infos graphiques ici : https://www.instagram.com/p/CM_3lWHsvUW/

NOTES IMPORTANTES:
1. Comme indiqué ci-dessus, TWRP 3.3.1.0/1 est vraiment recommandé
2. SM-G960N, SM-G965N et SM-N960N DOIVENT INSTALLER le zip ROM avec le titre "ONLY_N_VARIANT"
3. CLEAN FLASH EST RECOMMANDÉ
4. Ne mettez pas à jour l'apk AOD de GALAXY STORE ou vous obtiendrez à nouveau "AOD CHARGING BUG"
5. Ne mettez pas à jour Photo Editor depuis GALAXY STORE

LIEN DE TÉLÉCHARGEMENT:
NOBLE ROM 1.5 : https://www.androidfilehost.com/?fid=14943124697586367916

NOBLE ROM 1.5 POUR G960N, G965N, N960N : https://www.androidfilehost.com/?fid=14943124697586367908

GROUPE TÉLÉGRAMME :


CANAL TÉLÉGRAMME :

SUIVEZ-MOI SUR MON NOUVEAU PROFIL INSTAGRAM : https://www.instagram.com/invites/contact/?i=wehmn6h8vftx&utm_content=ibotzda

Suivez-moi sur Facebook : https://www.facebook.com/AlexisDevXDA/
can I have mirror links (Mediafire, Google Drive, Mega), so that I can download Noble Rom 1.5 ONE UI 2.5 A10Q S9+, those from androidfilehost.com are out of order.
 

Kiril10012

New member
May 31, 2023
3
0
I got Noble Rom 3.4 / One UI 4.1 now and everything worked as planned. I would like to change the boot animation (Noble Boot Animation is currently active).

Does anyone know how I can change it? I already tried different methods like replacing the .qmg files inside system/media, putting a bootanimation.zip folder inside there or using odin to change them via edited .tar file.

Nothing so far seems to work. Hope anyone could help me out.
 
Last edited:

Pro master

New member
Feb 26, 2023
2
0
hi im getting an error saying 'symlink ; some symlinks failed' so what should i do? This is the log error-
 

Attachments

  • NOBLEROM3.4_SERRA.zip.log.txt
    5 KB · Views: 36
Last edited:

Kiril10012

New member
May 31, 2023
3
0
I got Noble Rom 3.4 / One UI 4.1 now and everything worked as planned. I would like to change the boot animation (Noble Boot Animation is currently active).

Does anyone know how I can change it? I already tried different methods like replacing the .qmg files inside system/media, putting a bootanimation.zip folder inside there or using odin to change them via edited .tar file.

Nothing so far seems to work. Hope anyone could help me out.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 13
    FEATURES (72 x 25 pol) (72 x 20 pol) (72 x 15 pol).png


    Note that some of them couldn't work as expected! Just put the ones that were working fine!

    Apps List:

    AOD
    Gallery
    Messages
    My Files
    Device Care
    Weather
    Smart Capture
    Keyboard
    Game Launcher
    Routines
    Contacts

    3.png


    Every time you want to install OneUI 6 Apps or revert back to OneUI 5 Apps you need to follow this:

    1 - Flash APPS REMOVER
    2 - Let the system reboot and then reboot again to TWRP
    3 - Flash OneUI 6 or OneUI 5 Apps zip

    5.png


    8
    7.png


    7.png

    Announcement FILM here: https://www.instagram.com/reel/CvRkP_nAcuA/?igshid=YTUzYTFiZDMwYg==

    Updated base to OneUI 5.1.1 S20 firm with September's security patches (HWHI)
    Changed vendor base, now it's based on vndk31 N10L (big thx to @ananjaser1211 who helped me fixing bt audio)
    Fixed front camera and HDR issues
    'OK Google' should be also fine now
    Fixed spen translation
    Added support for Adaptive Eye Comfort Shield (thx to @ananjaser1211)
    Ported some new drivers from N10L vndk33
    Updated emojis to OneUI6 ones
    Updated Magisk to latest Canary Version
    Updated KernelSU
    Updated BT Library Patcher to v2.6.4
    Added swap support on f2fs
    Improved performance and stability

    3.png


    Follow these steps carefully! CLEAN INSTALL ONLY!

    In order to prevent TWRP crash that make Magisk not installable, use this TWRP Patched: https://forum.xda-developers.com/attachments/patch_twrp_xxtr-zip.5809969/
    If you notice the "failed to mount /omr" and "failed to mount /preload" they are common and not a real issue. You can easily solve this by wiping OMR and Preload in Wipe/Advanced Wipe menu

    TWRP 3.7.0_9-0
    0. Make a Backup of EFS and of all your stuffs before proceeding

    1. Open TWRP by pressing volume up+ bixby + power buttons
    2. Press on "Install" and select Universal9810_Repartitioner https://forum.xda-developers.com/attachments/universal9810_repartitioner-zip.5816841/
    3. Reboot to TWRP
    4. Press on "Wipe" and select "Format Data" then type "yes"
    5. Reboot again to TWRP
    6. Press on "Install" and select Universal9810_Cleaner https://forum.xda-developers.com/attachments/universal9810_cleaner-zip.5809289/

    7. Reboot again to TWRP
    8. Press "Install" and select NOBLEROM zip
    9. Follow AROMA instruction and at the end of installation, reboot
    10. Enjoy Noble ROM

    MANDATORY: LET THE ROM BOOT AND THEN FLASH NOBLE3.7_PART2 ZIP

    2.png


    Check this to know which bugs are currently on NOBLE ROM. This list will be constantly updated once we find new bugs or we fix new stuffs.

    5.png



    9.png

    DONATE WITH PAYPAL:

    TELEGRAM GROUP:
    TELEGRAM CHANNEL:

    FOLLOW ME ON INSTAGRAM: https://www.instagram.com/invites/contact/?i=wehmn6h8vftx&utm_content=ibotzda

    FOLLOW ME ON TWITTER:
    6
    FEATURES (72 x 25 pol) (72 x 20 pol) (72 x 15 pol).png

    7.png

    3.7.1
    Fixed night mode camera fc in certain situations

    Fixed heart rate sensor not detected
    Fixed DRM Playback (Netflix and other streaming apps)
    Fixed shamiko corrupted files, should fix banking apps

    Still remember to flash NOBLE3.7 PART2 After BOOT

    3.7
    Updated base to OneUI 5.1 S20 firm with September's security patches (HWHI)
    Changed vendor base, now it's based on vndk31 N10L (big thx to @ananjaser1211 who helped me fixing bt audio)
    Fixed front camera and HDR issues
    'OK Google' should be also fine now
    Fixed spen translation
    Added support for Adaptive Eye Comfort Shield (thx to @ananjaser1211)
    Added OneUI 6 Emojis
    Ported some new drivers from N10L vndk33
    Updated emojis to OneUI6 ones
    Updated Magisk to latest Canary Version
    Updated KernelSU
    Updated BT Library Patcher to v2.6.4
    Added swap support on f2fs

    Improved performance and stability

    3.png

    In order to prevent TWRP crash that make Magisk not installable, use this TWRP Patched: https://forum.xda-developers.com/attachments/patch_twrp_xxtr-zip.5809969/
    If you notice the "failed to mount /omr" and "failed to mount /preload" they are common and not a real issue. You can easily solve this by wiping OMR and Preload in Wipe/Advanced Wipe menu

    1. Boot into TWRP
    2. Flash APPS_REMOVER.zip
    3. Let the system boot and then go back to TWRP
    4. Press "Install" and select NOBLEROM zip
    5. Follow AROMA instruction and at the end of installation
    6. REBOOT SYSTEM (important)
    7. Go back to TWRP
    8. Flash NOBLE3.7 PART2 zip
    9. Reboot and enjoy

    1. Boot into TWRP
    4. Press "Install" and select NOBLEROM zip
    3. Follow AROMA instruction and at the end of installation
    4. REBOOT SYSTEM (important)
    5. Flash NOBLE3.7 PART2 zip
    7. Reboot and enjoy

    If you have already done repartition skip to step 8
    Make a Backup of EFS and of all your stuffs before proceeding
    1. Open TWRP by pressing volume up+ bixby + power buttons
    2. Press on "Install" and select Universal9810_Repartitioner https://forum.xda-developers.com/attachments/universal9810_repartitioner-zip.5816841/
    3. Reboot to TWRP
    4. Press on "Wipe" and select "Format Data" then type "yes"
    5. Reboot again to TWRP
    6. Press on "Install" and select Universal9810_Cleaner https://forum.xda-developers.com/attachments/universal9810_cleaner-zip.5809289/
    7. Reboot again to TWRP
    8. Press "Install" and select NOBLEROM zip
    9. Follow AROMA instruction and at the end of installation
    10. Flash Noble3.7 PART2 zip and reboot
    11. Enjoy Noble ROM

    2.png



    5.png



    MANDATORY!!!!!! NOBLE 3.7 PART2 (FLASH AFTER BOOT)


    VIDEO TUTORIAL ON HOW TO ENABLE RAM PLUS ON NOBLE 2.0+ IS HERE:

    10.png




    1
    Anyone able to get banking apps to work? Device passes Safetynet but banking apps are still detecting root.

    I have changed Magisk package name + disabled Enforce DenyList + Zygisk is on.

    Screenshot_20230925_134547_Yet%20Another%20SafetyNet%20Attestation%20Checker.jpg
    Screenshot_20230925_135049.jpg
    1
    Is it possible to port this rom to s7 edge? Can you guide me which step required to port this rom into s7 edge or which changed need to be made to work this rom on s7 edge.
    no
  • 184
    alex.png

    Disclaimer

    We are not responsable of any problems caused by root like tripped knox... When you flash something like this you may know about the risks you are going to find in!

    Always backup your phone before and after flashing TWRP custom recovery:

    In TWRP press BACKUP and select:
    System Image, Vendor Image, Boot Image, Data, Baseband and EFS
    and save your backup in your Internal Storage.


    1.png

    • SM-N96xF/FD/N, SM-G96xF/FD/N supported. Only Exynos, no Snapdragon support.
    • Based on official OneUI 5.1.1 S20 (system) + N10Lite (vendor) with September's Security Patches.
    • Odexed, Hardly Debloated and tweaked for best performance and better battery.
    • MAKE YOUR ROM!
      AROMA INSTALLER allows you to setup NOBLE ROM as you really wish! Select what to DEBLOAT and what to INSTALL as you wish!
    • Choose one CSC from more than 100 available!
    • More than 50 apps that can be debloated more!
    • Choose which build.prop or csc mods you want
    • Choose between Magisk, KernelSU or No Root options
    • Choose RAM Compression Level
    • Bixby Button Remappable
    • Light Performance and High Performance modes unlocked in "Device Care"
    • Protect your battery option enabled in "Device Care"
    • DualSIM and MultiSIM switcher supported
    • Disabled RMM Lock.
    • Safetynet passes just by enabling zygisk!
    • Secure Folder and App Lock available
    • Call Recording support
    • Outdoor Mode available on Settings/Display
    • Fingerprint unlock and fingerprint gestures working
    • Photo Remaster, Object Eraser, Image Clipper supported
    • New portrait effects available
    • Adaptive Eye comfort shield and Extra Dim supported
    • Greatest Audio experience with our Dolby Atmos settings
    • Camera fully working (check bugs list for minor issues)
    • Night mode zoom on camera
    • Night mode on hyperlapse
    • Bixby Vision and Document Scan supported
    • AR Apps supported
    • Dolby Atmos supported
    • Samsung DEX supported, choose to run it directly in your phone's display (AROMA option)
    • Good Lock available for all countries
    • S23 Wallpapers pre-installed
    • iOS 16 or OneUI 6 emojis selectable in aroma.
    • OneUI 6 Apps supported (check OneUI 6 Apps Post for more)
    • And much more, don't worry if the rom size is big, it contains all you need ;).

    2.png


    3.png

    TWRP 3.7.0_9-0
    0. Make a Backup of EFS and of all your stuffs before proceeding
    1. Open TWRP by pressing volume up+ bixby + power buttons
    2. Press on "Install" and select Universal9810_Repartitioner https://forum.xda-developers.com/attachments/universal9810_repartitioner-zip.5816841/
    3. Reboot to TWRP
    4. Press on "Wipe" and select "Format Data" then type "yes"
    5. Reboot again to TWRP
    6. Press on "Install" and select Universal9810_Cleaner https://forum.xda-developers.com/attachments/universal9810_cleaner-zip.5809289/
    7. Reboot again to TWRP
    8. Press "Install" and select NOBLEROM zip
    9. Follow AROMA instruction and at the end of installation, reboot
    10. Enjoy Noble ROM


    4.png


    5.png


    6.png


    7.png


    35
    NOBLE ROM 2.0 IS ONLINE!
    Hope you will enjoy! Clean install is hardly recommended!

    CHANGELOG:
    Inital Build for OneUI 4.0 FULL PORT
    Check this to know what's new on OneUI 4: https://telegra.ph/OneUI-4--Noble-ROM-20-Main-Changelog-01-29

    HOW TO INSTALL:
    Follow these steps carefully! CLEAN INSTALL is always RECOMMENDED!

    TWRP 3.6.0_9-1

    1. Open TWRP by pressing volume up+ bixby + power buttons
    2. Go in WIPE menu' and press ADVANCED WIPE
    3. Then select: system, vendor,odm, data, cache, dalvik and SWIPE TO WIPE
    4. Go back in TWRP menu' and press REBOOT, then press 'Recovery'
    5. After TWRP Reboot press 'Install' then select NOBLE ROM zip and SWIPE TO FLASH
    6. Follow AROMA instruction (FOR STARTERS: select NO DEBLOAT and CLEAN INSTALL options)

    7.Reboot System and Enjoy Noble ROM

    More and graphic infos here: https://www.instagram.com/p/COIQbO4sHfF/

    BUG LIST:
    Check this to know which bugs are currently on NOBLE ROM 2.0. This list will be constantly updated once we find new bugs or we fix new stuffs.


    IMPORTANT NOTES:
    1. For STARTERS is important to select NO DEBLOAT option, in order to prevent issues with the ADVANCED DEBLOAT
    2. Don't update Accessibility App from Galaxy Store or you will loose Extra Dim function
    3. Disable HDR from Camera Settings to avoid back camera crash
    4. Keep your face far from front Camera to avoid camera crash


    DOWNLOAD LINK:
    NOBLE ROM 2.0: https://www.androidfilehost.com/?fid=17825722713688289941

    NOBLE ROM 2.0 FOR G960N, G965N, N960N: https://www.androidfilehost.com/?fid=17825722713688289859

    VIDEO REVIEW OF NOBLE ROM 2.0 IS NOW OUT ON OUR YOUTUBE CHANNEL:

    TELEGRAM GROUP:


    TELEGRAM CHANNEL:

    FOLLOW ME ON MY NEW INSTAGRAM's PROFILE: https://www.instagram.com/invites/contact/?i=wehmn6h8vftx&utm_content=ibotzda

    Follow me on Facebook: https://www.facebook.com/AlexisDevXDA/
    25
    NOBLE ROM 1.1 IS ONLINE!
    Hope you will enjoy! Clean install is recommended!

    CHANGELOG:
    Added S9 and S9+ support (S9 users have to renunce at bixby service)
    Fixed Photo Editor FC after update
    Fixed Game Launcher FC before update
    Fixed heart rate sensor
    Fixed sound loudness
    Fixed Biometrics Settings fc after setting new biometric lock
    Added Sound Alive missing modes
    Fixed installation message error "system not mounted" and symlinks errors
    Added new option in AROMA to choose which kind of debloat you wanna apply
    Removed Good Lock section in AROMA and put an option to install just Good Lock Launcher app
    Removed Chinese Smart Manager in aroma
    Removed not working camera modes
    Updated kernels
    Improved general stability and performance

    HOW TO INSTALL:
    Follow these steps carefully! CLEAN INSTALL is always RECOMMENDED!

    TWRP 3.3.1.1
    1. Open TWRP by pressing volume up+ bixby + power buttons
    2. Go in WIPE menu' and press ADVANCED WIPE
    3. Then select: system, vendor, data, cache, dalvik and SWIPE TO WIPE
    4. Go back in TWRP menu' and press INSTALL
    5. Then select NOBLE ROM zip and SWIPE TO CONFIRM FLASH
    6. Follow AROMA instruction (FOR STARTERS: select NO DEBLOAT option)
    7. REBOOT and enjoy NOBLE ROM!

    TWRP 3.5.x.x
    1. Open TWRP by pressing volume up+ bixby + power buttons
    2. Go in WIPE menu' and press ADVANCED WIPE
    3. Then select: system, vendor, data, cache, dalvik and SWIPE TO WIPE
    4. Go back in TWRP menu' and press INSTALL
    5. Then select NOBLE ROM zip and SWIPE TO CONFIRM FLASH
    6. Follow AROMA instruction (FOR STARTERS: select NO DEBLOAT option)
    7. If you try to reboot you will see 'NO OS INSTALLED' warning
    8. Go back WITHOUT REBOOTING and FLASH THE ROM AGAIN
    9. Then REBOOT and enjoy NOBLE ROM!

    More and graphic infos here: https://www.instagram.com/p/CM_3lWHsvUW/

    IMPORTANT NOTES:
    1. For STARTERS is important to select NO DEBLOAT option, in order to prevent issues with the
    ADVANCED DEBLOAT
    2. Is RECOMMENDED to use TWRP 3.3.1.1 with this build. DON'T COMPLAIN about this, I will get it fully working for newer TWRP as soon as I have enough time.
    3. Backup your phone before installing! In TWRP press BACKUP and select:
    System Image, Vendor Image, Boot Image, Data, Baseband and EFS
    and save your backup in your Internal Storage

    DOWNLOAD LINK:
    NOBLE ROM 1.1: https://www.androidfilehost.com/?fid=2188818919693772286
    CAMERA FIX ONLY FOR G960F/FD/N USERS: https://www.androidfilehost.com/?fid=2188818919693772295
    KERNEL FIX ONLY FOR G960F/FD/N USERS:

    TELEGRAM GROUP:

    FOLLOW ME ON MY NEW INSTAGRAM's PROFILE: https://www.instagram.com/invites/contact/?i=wehmn6h8vftx&utm_content=ibotzda

    Follow me on Facebook: https://www.facebook.com/AlexisDevXDA/
    24
    NOBLE ROM 1.7 IS ONLINE!
    Hope you will enjoy! Clean install is recommended!

    CHANGELOG:
    Updated base to N10+ OneUI 3.1.1 base with November's patches (FUJ1)
    Updated kernels and CSC
    Updated vendor to latest N10 Lite base
    Fixed soft reboot issue caused by updating apps
    Fixed usb settings greyed out
    Fixed fonts issues
    Fixed "SIM Card has changed" popup error
    OneUI 2.5 Camera put again by default
    Added an option in aroma to choose between Noble or WhiteWolf Kernel (by yarpin)
    Improved Perforamance
    Other minor Improvements

    HOW TO INSTALL:
    Follow these steps carefully! CLEAN INSTALL is always RECOMMENDED!

    TWRP 3.3.1.1
    1. Open TWRP by pressing volume up+ bixby + power buttons
    2. Go in WIPE menu' and press ADVANCED WIPE
    3. Then select: system, vendor, data, cache, dalvik and SWIPE TO WIPE
    4. Go back in TWRP menu' and press INSTALL
    5. Then select NOBLE ROM zip and SWIPE TO CONFIRM FLASH
    6. Follow AROMA instruction (FOR STARTERS: select NO DEBLOAT option)
    7. REBOOT and enjoy NOBLE ROM!

    TWRP 3.5.x.x
    1. Open TWRP by pressing volume up+ bixby + power buttons
    2. Go in WIPE menu' and press ADVANCED WIPE
    3. Then select: system, vendor, data, cache, dalvik and SWIPE TO WIPE
    4. Go back in TWRP menu' and press INSTALL
    5. Then select NOBLE ROM zip and SWIPE TO CONFIRM FLASH
    6. Follow AROMA instruction (FOR STARTERS: select NO DEBLOAT option)
    7. If you try to reboot you will see 'NO OS INSTALLED' warning
    8. Go back WITHOUT REBOOTING and FLASH THE ROM AGAIN
    9. Then REBOOT and enjoy NOBLE ROM!

    More and graphic infos here: https://www.instagram.com/p/CM_3lWHsvUW/

    IMPORTANT NOTES:
    1. As stated above, TWRP 3.3.1.0/1 is really recommended
    2. SM-G960N, SM-G965N and SM-N960N HAVE TO INSTALL the ROM zip with "ONLY_N_VARIANT" title
    3. Also CLEAN FLASH IS RECOMMENDED
    4. Don't update AOD apk from GALAXY STORE or you will get again "AOD CHARGING BUG"
    5. Don't update Photo Editor from GALAXY STORE

    DOWNLOAD LINK:
    NOBLE ROM 1.7: https://www.androidfilehost.com/?fid=7161016148664840459

    NOBLE ROM 1.7 FOR G960N, G965N, N960N: https://www.androidfilehost.com/?fid=7161016148664840460

    TELEGRAM GROUP:


    TELEGRAM CHANNEL:

    FOLLOW ME ON MY NEW INSTAGRAM's PROFILE: https://www.instagram.com/invites/contact/?i=wehmn6h8vftx&utm_content=ibotzda

    Follow me on Facebook: https://www.facebook.com/AlexisDevXDA/
    24
    NOBLE ROM 2.8 IS ONLINE!
    Hope you will enjoy! Dirty flash from NOBLE ROM 2.1+ is allowed! If you come from NOBLE 1.x, 2.0 or any other ROM please Clean Flash!

    CHANGELOG:
    Final release for Android 12 NOBLE ROM
    Ported new A12 HAL from N10Lite (this means better performance and battery) (thanks to @ananjaser1211)
    Fixed Front Cam FC
    Fixed HDR FC in low light conditions
    Fixed Filters in front camera (only for F VARIANT)
    Fixed OK Google (Google App Installer needed) (thanks to @ananjaser1211 )
    Fixed 3D Touch Home Button (thanks to @ananjaser1211 )
    Improved general performance and battery life

    KERNEL CHANGELOG:
    Boostings optimized for battery
    Wakelock blocker updated
    Morosound included


    HOW TO INSTALL:
    Follow these steps carefully!
    Dirty flash from NOBLE ROM 2.1+ is allowed! If you come from NOBLE 1.x, 2.0 or any other ROM please Clean Flash!

    DON'T DO ANY ADVANCED WIPE, JUST GO IN TWRP AND DIRECTLY FLASH THE ROM. IF YOU HAVE SOME ISSUES WITH INSTALLER JUST FLASH AGAIN THE ROM

    TWRP 3.6.1_9-0
    0. Make a Backup of EFS and of all your stuffs before proceeding

    1. Open TWRP by pressing volume up+ bixby + power buttons
    2. Press 'Install' then select NOBLE ROM zip and SWIPE TO FLASH
    3. Dirty flash from NOBLE ROM 2.1+ is allowed! If you come from NOBLE 1.x, 2.0 or any other ROM please Clean Flash!
    4. Follow AROMA instruction (FOR STARTERS: select NO DEBLOAT)

    5.Reboot System and Enjoy Noble ROM

    IF AFTER DIRTY FLASH YOU FIND SOME PROBLEMS, PLEASE CLEAN INSTALL

    More and graphic infos here: https://www.instagram.com/p/Cbm7Gros2Hf/?utm_medium=copy_link
    Video tutorial of how to correctly install Noble ROM is here:

    BUG LIST:
    Check this to know which bugs are currently on NOBLE ROM. This list will be constantly updated once we find new bugs or we fix new stuffs.


    IMPORTANT NOTES:
    1. For STARTERS is important to select NO DEBLOAT option, in order to prevent issues with the ADVANCED DEBLOAT
    2. Install Magisk App manually downloading it from here: https://github.com/topjohnwu/Magisk/releases/tag/v25.2
    3. Don't update Photo Editor from Galaxy Store, if you do it please unistall it to have it working again
    4. Don't update Accessibility from Galaxy Store or you will loose Extra Dim function

    DOWNLOAD LINKS:
    NOBLE ROM 2.8:

    OneDrive MIRROR: https://1drv.ms/u/s!AmNYN7PXcx7NjAUZuHgNaWZAcWd3?e=Vhcrk3
    MEGA: MEDIAFIRE: Google Drive MIRROR: https://drive.google.com/file/d/1fnGhKSVbTmh829ehzSx-BgGpWKGV9uUI/view?usp=share_link


    NOBLE ROM 2.8 FOR G960N, G965N, N960N:
    OneDrive MIRROR: https://1drv.ms/u/s!AqGdTk4hyeaFiLF72fR2zmPeGQqyjw?e=ybodEE
    MEGA: MEDIAFIRE: Google Drive MIRROR: https://drive.google.com/file/d/13_APB0BOG8iyk1F76uWvxxvhF9oT6c60/view?usp=share_link


    BIXBY AND AR APPS ADDONS FOR N VARIANT (flash after the ROM booted): https://www.androidfilehost.com/?fid=15664248565197181607

    VIDEO TUTORIAL ON HOW TO ENABLE RAM PLUS ON NOBLE 2.0+ IS HERE:

    TELEGRAM GROUP:


    TELEGRAM CHANNEL:

    FOLLOW ME ON MY NEW INSTAGRAM's PROFILE: https://www.instagram.com/invites/contact/?i=wehmn6h8vftx&utm_content=ibotzda

    Follow me on Facebook: https://www.facebook.com/AlexisDevXDA/