[NOBLE ROM 3.7.1 CALABRIA OneUI 5.1.1 FULL PORT][09/23 Patches][18/09/2023][SM-N960F/FD/N--SM-G96xF/FD/N]

Search This thread

AlexisXDA

Recognized Developer
Oct 27, 2014
3,458
11,703
Milan
alex.png

Disclaimer

We are not responsable of any problems caused by root like tripped knox... When you flash something like this you may know about the risks you are going to find in!

Always backup your phone before and after flashing TWRP custom recovery:

In TWRP press BACKUP and select:
System Image, Vendor Image, Boot Image, Data, Baseband and EFS
and save your backup in your Internal Storage.


1.png

  • SM-N96xF/FD/N, SM-G96xF/FD/N supported. Only Exynos, no Snapdragon support.
  • Based on official OneUI 5.1.1 S20 (system) + N10Lite (vendor) with September's Security Patches.
  • Odexed, Hardly Debloated and tweaked for best performance and better battery.
  • MAKE YOUR ROM!
    AROMA INSTALLER allows you to setup NOBLE ROM as you really wish! Select what to DEBLOAT and what to INSTALL as you wish!
  • Choose one CSC from more than 100 available!
  • More than 50 apps that can be debloated more!
  • Choose which build.prop or csc mods you want
  • Choose between Magisk, KernelSU or No Root options
  • Choose RAM Compression Level
  • Bixby Button Remappable
  • Light Performance and High Performance modes unlocked in "Device Care"
  • Protect your battery option enabled in "Device Care"
  • DualSIM and MultiSIM switcher supported
  • Disabled RMM Lock.
  • Safetynet passes just by enabling zygisk!
  • Secure Folder and App Lock available
  • Call Recording support
  • Outdoor Mode available on Settings/Display
  • Fingerprint unlock and fingerprint gestures working
  • Photo Remaster, Object Eraser, Image Clipper supported
  • New portrait effects available
  • Adaptive Eye comfort shield and Extra Dim supported
  • Greatest Audio experience with our Dolby Atmos settings
  • Camera fully working (check bugs list for minor issues)
  • Night mode zoom on camera
  • Night mode on hyperlapse
  • Bixby Vision and Document Scan supported
  • AR Apps supported
  • Dolby Atmos supported
  • Samsung DEX supported, choose to run it directly in your phone's display (AROMA option)
  • Good Lock available for all countries
  • S23 Wallpapers pre-installed
  • iOS 16 or OneUI 6 emojis selectable in aroma.
  • OneUI 6 Apps supported (check OneUI 6 Apps Post for more)
  • And much more, don't worry if the rom size is big, it contains all you need ;).


2.png



3.png

TWRP 3.7.0_9-0
0. Make a Backup of EFS and of all your stuffs before proceeding
1. Open TWRP by pressing volume up+ bixby + power buttons
2. Press on "Install" and select Universal9810_Repartitioner https://forum.xda-developers.com/attachments/universal9810_repartitioner-zip.5816841/
3. Reboot to TWRP
4. Press on "Wipe" and select "Format Data" then type "yes"
5. Reboot again to TWRP
6. Press on "Install" and select Universal9810_Cleaner https://forum.xda-developers.com/attachments/universal9810_cleaner-zip.5809289/
7. Reboot again to TWRP
8. Press "Install" and select NOBLEROM zip
9. Follow AROMA instruction and at the end of installation, reboot
10. Enjoy Noble ROM



4.png



5.png



6.png



7.png


 
Last edited:

Leon

Senior Member
Dec 31, 2012
2,618
1,172
30
Samsung Galaxy S9+
Redmi Note 9
For everyone, who wonders how to pass SafetyNet, can check this post. It worked for me, but it's not like in One UI 2.5 with WW kernel. Yes, you will pass it, yes apps will run. But Netflix quality is pretty bad and bank apps don't work with a fingerprint. However, the room seems very smooth and stable <3

 
Last edited:
  • Like
Reactions: cristianpanama

vwong

Senior Member
Oct 10, 2014
300
86
twrp 3.3.1.1 or 3.3.1.0...?

because here in guide at xda recommendation is twrp 3.3.1.1,
while at Alex insta page, at graphically demo its recommended twrp is 3.3.1.0.

so which version exactly to follow.?
 
  • Like
Reactions: originalul

JorX_AD

Senior Member
Feb 4, 2012
103
56
After following three times the installation process as mentioned in the original post my device keeps crashing. The home screen starts blinking black, does not respond to touch, and after a few seconds the message "System UI isn't responding" appears.

I will try to debug through ADB if i'm able to enable developer options first.

Thank you so much for your effort.

Device: G960F
Installation: TWRP 3.3.1.1 - No debloat - Clean install (format then wipe)

Edit: I've seen in the Note9 thread there is a kernel fix for the S9, i will install it and give report.
Edit2: Ok, everything working perfectly after flashing the kernel
 
Last edited:
  • Like
Reactions: cristianpanama

PcO7

Member
Jul 19, 2020
49
1
Does '2. Home Button pressure is not fully supported since S10/N10' mean unlock the device by pressing the 'invisible" homebutton is not existing/working?
 

neth15

Senior Member
1. AOD screen always shows text "Charging" next to the battery percentage, even though it is not charging atm.
2. Controlling USB mode (which side is controller, data, charging only etc.) is not working at all. Only in Developer's options
3. Android Auto is not working as well
4. Universal SafetyNet Fix works, but fingerprint doesn't work (not even with modded modules for Samsung)

On the other hand, Wireless DeX on PC is working 👌
 
  • Like
Reactions: ipt and crewpuk13th

JorX_AD

Senior Member
Feb 4, 2012
103
56
1. AOD screen always shows text "Charging" next to the battery percentage, even though it is not charging atm.
2. Controlling USB mode (which side is controller, data, charging only etc.) is not working at all. Only in Developer's options
3. Android Auto is not working as well
4. Universal SafetyNet Fix works, but fingerprint doesn't work (not even with modded modules for Samsung)

On the other hand, Wireless DeX on PC is working 👌

Android Auto is working fine for me, I just had to install it from the store

Edit: It worked in my car but not in my friends car, weird
 
Last edited:

crewpuk13th

Senior Member
Nov 29, 2013
233
76
Bandung
1. AOD screen always shows text "Charging" next to the battery percentage, even though it is not charging atm.
2. Controlling USB mode (which side is controller, data, charging only etc.) is not working at all. Only in Developer's options
3. Android Auto is not working as well
4. Universal SafetyNet Fix works, but fingerprint doesn't work (not even with modded modules for Samsung)

On the other hand, Wireless DeX on PC is working 👌

other than this I also found that Mobile Network Data Usage on settings are force closing when I tap it. Also it shows blank "data usage" the notification panel
 

nf88nfno3054

Senior Member
Jun 22, 2018
52
3
Hello. Thank you. I'll tell you what I mean. I have a phone that is bought in installments. The previous owner stopped paying in installments, the telephone number in the contract is off. The phone can be locked when it resets to factory settings and reconnects with KNOX. KNOX GAURD can lock my phone programmatically and it will be KG state locked. I want to protect myself from this and load the soft that is decnoxed. Does your soft fulfill this function. Thank you for your answer, good man.
 

Top Liked Posts