Nook Tablet 1.4.3 complete root guide for 8or16gb to GB and JB
- Thread starter malloneem
- Start date
I got all the recovery tools from that thread itself. But the cwm 6 SD card that you prepare there requires.you to have cyanoboot to load up the recovery.
And the cwm 5 SD card (which is a proper bootable SD card, boots into recovery as soon as nt is turned on) is not suitable for flashing Jb roms.
That's why you have to replace only the boot.img file and then you get cwm6 bootable (proper) card
Hit Thanks if I helped you!
Root is only getting access to read write and add system files (not definition, look that up elsewhere)
Custom roms always has root access (afaik)
Hit Thanks if I helped you!
Stock 1.4.3 8gb or 16gb Nook Tablet to cm10 in 5 steps.
1) Create cwm5 bootable sd card. Guide here.
2) Boot into cwm5.*
3) Install cwm6. Download here.
4) Reboot into cwm6; At cyanoboot screen, hold 'n' and choose 'Internal eMMc Recovery.'
5) Install cm10 + gapps.
*Note: usb lead may need to be connected.
N.B - I personally flashed cwm6 from within cwm5 and it worked fine.
1) Create cwm5 bootable sd card. Guide here.
2) Boot into cwm5.*
3) Install cwm6. Download here.
4) Reboot into cwm6; At cyanoboot screen, hold 'n' and choose 'Internal eMMc Recovery.'
5) Install cm10 + gapps.
*Note: usb lead may need to be connected.
N.B - I personally flashed cwm6 from within cwm5 and it worked fine.
Last edited:
I had some trouble getting Cyanoboot started as well. It just went to stock. I didn't do many attempts since I had a bootable card (the one I run CM10 from) just to get it started. I then removed that card and went into to cwm. Maybe if I had fiddled around more I would have gotten to cyanoboot anyway, but I thought I'd give "plan B" a try...
Sent from my Barnes & Noble Nook Tablet using Tapatalk 2
Sent from my Barnes & Noble Nook Tablet using Tapatalk 2
Last edited:
I have to say this is the easiest and best guide I have come across. I was able to easily get root access. The only problem is I'm not able to install the rom or gapps. When I select install zip from sd card, -> choose zip from sd card, it doesn't see anything, it just says no files found. I've tried 4 different cards,( two 2gb & two 32 gb) and the same problem with both. Any ideas as to what I might have done wrong?
You should have debugging and install from unkn source aready checked uder manage apps and development but double check. if all is good there in TWRP or CWM dismount and remount SD and make sure it's reading the card/ on TWRP in the left pane there will be files to choose, brouse them and see if you can find the downloads. If still no joy, and your for sure rooted try to reformat your sd again with sdformatter and put your rom and gapps back on it and try again. LMK, thanks,
I am at this step but when i click install from sd it says I need rom manager premium to use other recoveries than clockwork. Any suggestions?
You should have also installed goo manager, use that app, or you can power down and reboot into recovery and flash that way.
Thanks! Didn't wanna stray from the guide. Just finished everything up! Thanks again for the guide
Glad it worked out, Have to see whats up with the manager, Thanks for the question & FYI .
As far as I know you have to use SD to gain root on a NT, Sorry
i remember seeing a sd card inside of pandigital so I just took it out but it's only 1 gb. I suppose I can't do anything with this.
i ordered a class 6 8gb which should be here early next week. can't wait to give it a try. as of now the nook is just sitting there being useless :/
You would have to go through more steps because of the size (basically each step separate) but it could be doable,
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
44This is how I rooted & installed CM10/JB on my nook 8GB 1.43 Tablet. This will also work on a 16 GB Tablet too but I have not tested on the 16gb. I have it currently rockin my wifes nook and doing one for my kid for Christmas. So far it's shown to be stable with no known issues. This is NOT FOR NOOK COLOR OR ANY OTHER VERSION OF NOOK OTHER THAN NT 4gb or 16gb running 1.4.3. So if you do not have these models and proceed it is at your own risk as well.
1st and for most,
I am just a shlub that searched ALL over for a good "how to" and after several attempts said if I figured out how to do it I would write one so I could share some joy.
The true thanks go to all the great Devs out there that put all these tools and roms together so we could use them. Be sure to pass along thanks & or DONATIONS to ALL deves and threads used in this how to, it's thier brains out there making our devices sweet.
There is a lot of how 2's for this NT but I found them to be terribly over complicated and frankly wore my self out looking for the "best" one. So this one looks long but that's because I wrote a start to finish and tried to be as noob friendly a possible by including every step.
All of this is done with WINDOWS, (sorry all the others, keep looking or adapt)
STANDARD DISCLAIMER, TRY ALL OF THIS OF YOUR OWN FREE WILL, THERE IS ALWAYS A CHANCE TO BRICK YOUR DEVICE AND RENDER IT USLESS!!!
I nor anyone mentioned in this thread assumes any responcibility for what you are about to accomplish.
I do wish to express my personal thanks again to everyone involved and to XDA for allowing all of this to be possible. In the event you do "brick" your device or have reason to return to stock to start over there are very good threads for returning your NT to stock and updating to 1.4.3 so don't be affraid. This is a "perminate root" and not a boot from SD card but can be reversed using the return to stock method.
If you do not have a Gmail account create one now (you will need it)
Turn on your new nook tablet and go ahead and register the device and use your gmail account.
Create a folder on your desktop and DOWN LOAD THESE TOOLS to the new folder,
SD CARD Formatter
https://www.sdcard.org/consumers/formatter/
SD card Partition tool
http://www.partitionwizard.com/free-partition-manager.html
DISK IMAGER
http://www.softpedia.com/progDownload/Win32-Disk-Imager-Download-173006.html
You can go ahead and unzip/extract tools to the same folder some may want to install, so just let them and follow promps.
Some of this you may already have, but after reading a lot and having to jump from thread to thread because some guides don’t include everything I am providing it all start to finish.
OK you have some tools so lets play,
Get your self a sandisk class 4 or 6 MINI SD card with adapter, (1gb would do it if you have 2 but I'd say 4 GB min)
Classes are for speed. Below 4 is Peeew! & I found 10 to be too fast for the NT but will work. 6 is optimal and I used a 4 and it works like a champ.
(On the card itself it will have a C with a number in it, that’s where to find the class).
TIP: to make this a little easier I would also recommend using 2 cards 1 bigger one for roms and to use in your NT everyday and a small one for CWM. If not one will do but will have a few more steps towards the end.
1) Take the SD card (smaller one if you got the extra one) and place it in the PC, MAKE A NOTE OF THE DRIVE LETTER THATS ASSIGNED TO IT!! and
Open up the SDFormatter Select the drive letter for your card. click option, Select format type and choose FULL ERASE and click format then ok and wait until it's done. Click OK again and close the window.
2) Take out SD CARD from PC and then put it back in (again take note of the DRIVE LETTER).
Then open up Mini Tool Partition wizard, Click ok
You should see A disk at the top, THIS IS YOUR PC DO NOT DO ANYTHING TO THIS DISK...EVER...There may be others depending on what you have on your PC.
Look in the lower portion for the disk that has the DRIVE LETTER you made a note of is step 1. This is you SD card so it should have about the same capacity as what your using (4gb SD=3.69 one mine) . Click on that disk. (mine says Disk 2) click it.
On the left pane click Delete All Partitions and answer yes,
Below the disk where you last clicked you will either see your drive letter or a sybol like *: and it will be unallocated,
CLICK IT and then CLICK create partition on the left pane.
Beside CREATE AS choose and pick Primary from the drop down.
Beside FILE SYSTEM select FAT32 from the drop down.
On the bottom portion go to PARTITION SIZE and click in the box with the numbers to the right of it and change to 70Mb Then back up top where it says PARTITON LABEL and type boot
Click OK, and then look for the big red checkmark up top and click APPLY and YES in the pop up, wait a minute or so for the pop up then select OK after it's done, This will still show some unallocated but don’t worry about formatting it for now.
Now RIGHT click on that partition that says (your drive letter) :bootand go to modify and click on ACTIVE and then CLICK the red APPLY check mark again, then yes, then ok.
You can close that window and leave the SD card in the computer for now,
Get ready to hop around to get some more files. I provide the links to the devs threads so you can get updates and spread the love and thanks,
(don’t forget to thank them and feel free to donate, this would not be possible without their work)
Get some more downloads Save to folder on desk top and take a break while they download,
G to Albert’s thread below and grab Download File SD_ROOT_NT16or8gbV4_7
http://xdaforums.com/showthread.php?t=1439630
Albert does great work and may update so be sure to visit his site and also view his video's, don’t forget to buy Albert a cup of coffee or something for his work.
Go to your folder of downloads and unzip/extract the SD_ROOT_NT16or8gbV4_7 zip to “here” or to the same folder.
3. Power OFF your NT
The SD card should still be in your computer, Go ahead and pull it out and place the SD card in your Nook Tablet
4. Connect Nook Tablet with the cord that came with the NT to your PC (if you have never rooted before auto mount should already be on if the NT doesn't show up turn on auto mount)
It may show a pop up that says to format SD card. DO NOT, just click the red X to make that pop up go away.
It may install drivers, not necessary but let it if it does.
5. Go to computer or my computer from your windows start menu notice how it says BOOT: (drive letter mine is F) and it also shows MY NOOK (drive letter)
You can close that window now, Just want you to be aware of the “MY NOOK” so you DO NOT SELECT that one. ..EVER
6. Go to Win32diskimager.exe file that should be in your download folder. If you did not extract/unzip yet, do that now to “here” or to the same folder your in.
Then open win32diskimager-binary folder it created,
look for win32diskimager and double click select yes if you get a permission pop up.
7. Click the drive letter under device and select the drive letter that we named boot, (mine was F) DO NOT SELECT THE DRIVE LETTER THAT SAYS “MY NOOK” THAT IS THE ENTERNAL SD CARD ON NOOK ***DON’T SELECT MY NOOK!!!!
8. Click on Blue folder, NT16or8gbV47SDimagefile.img should show up.
If it does not click on desktop on left pane and search for it in the folder you created. Once found click on it then click save.
9. Click Write select yes on pop up. When done click OK on pop up that says write successful.
10. Disconnect Nook. Your card is made. Remove card and close those windows.
11. Get the rom’s and Prepare you other SD card, that you plan to use for an external SD for your NT.
If you are using only 1 card for this it’s a little more work but . Go ahead and download these roms and read ALL of step 12 and 13 before proceeding.
Get the rom’s, Go to this thread and get the CM 7 Team B rom it will be called> Download HERE MD5 95043b08484aa218ccf93b5ef4785825
http://xdaforums.com/showthread.php?t=1481826&highlight=team+b
(Don’t forget to spread the love here either)
Then go to gapps here http://goo.im/gapps/
And download a new version of gapps, I used
gapps-gb-20110828-signed.zip
This is a good stable ROM (wife preferred) BUT
If you want a JB rom get those from from the below thread but still download the CM7 rom from above as you will need it for JB.
http://xdaforums.com/showthread.php?t=1877217&highlight=cm7
I used CM10 from here, (awesome)
http://xdaforums.com/showthread.php?t=1877217
And get gapps from the same thread, again I used
http://goo.im/gapps/gapps-jb-20121011-signed.zip
(Again, some more hard workers here, show them some love... )
12.Prepare the new SD Card,
If it is a used card use the Sdformatter tool to erase format the card same way as above.
If it is new card this is not necessary.
Place the NEW or reformatted SD card in the card reader and into your PC.
Drag and drop, If you are just wanting CM7 drag and drop that zipped folder along with the GB gapps zipped folder to the NEW or reformatted SD card ,
If you are going to install the JB rom ALSO drag and drop the CM10 unzipped rom and unzipped JB gapps to the NEW or reformatted SD card .
13. Take a deep breath…. Were almost there.
POWER OFF the Nook Tablet
Place the 4gb SD card (1st one we worked with that we wrote the NT16or8gbV47SDimagefile.img on) into the nook tablet.
Connect the NT to your PC, you will see a Brown box, DO NOT do anything, wait and it will bring up your boot menu.
Tab down to install zip from SD card and hit the “hard“ button on the bottom center (actually right center when holding horizontal) of the NT to select.
Select choose zip from sd card and and and hit the “hard“ button on the bottom center (actually right center when holding horizontal) .
Select ONLY THIS file. root_8gb-or-16gb-NTV4_7
Tab down to YES -install choose root_8gb-or-16gb-NTV4_7 and hit the “n” button (same one as always)
Wait, when it is done it should return to the menu and say install from sd card complete at the bottom of the screen.
Hit the power button once and it should return to reboot system now, (but don’t select reboot)
AT THIS POINT REMOVE 4GB or smaller SD CARD (if you opted to only use one SD card at this point you would use the 4gb and do step 12. Using it then proceed to step 14)
14. PLACE THE NEW NEW or reformatted SD card WITH THE ROM ZIP FILES WE JUST MADE.
Use the volume buttons on the NT and
Tab down to install zip from SD card and hit the “hard“ button on the bottom center (actually right center when holding horizontal) of the NT to select.
Select choose zip from sd card and and and hit the “hard“ button on the bottom center (actually right center when holding horizontal) .
Now no matter what rom you will end up with first choose cm-7-TEAM-B-BETA1-signed zip, and hit the “hard“ button on the bottom center (actually right center when holding horizontal)
Tab down to YES -install choose cm-7-TEAM-B-BETA1-signed zip and hit the “n” button (same one as always)
Wait.. it will take a little bit to install, when it is done it should return to the menu and say install from sd card complete at the bottom of the screen.
NOW select choose zip from sd card again and hit “n” button
Select gapps-gb- (MAKE SURE TO SELECT GAPPS-GB) for CM7 rom. Hit “n” button
Select YES-install gapps-gb hit “n” button
Wait, when it is done it should return to the menu and say install from sd card complete at the bottom of the screen.
Now you should know how to navigate the screen so,
select wipe data/factory reset. Hit “n “ button Select yes.
Select wipe cache partition Hit “n “ button Select yes.
Select advanced hit “n” button
Select Wipe Dalvik cache Hit “n “ button Select yes.
Tab down and select go back, hit “n” button
Disconnect NT from PC and select reboot system now and hit the “n” button
WAIT… this could take several minutes,
Once this is done you will end up on the set up screen.
Set it up using your gmail account, it will more than likely tell you, you must connect to wifi. Do it. Then proceed with set up.
Once the google market comes on line wait it should kick you out and return to finish set up.
Follow the prompts and finish. Once complete you should now have the ‘Play Store” app on your screen.
Go there accept agreement and search for Rom Manager.once found in play store It should say UPDATE, do the update.
Now search for goo manager from the play store and install. Allow and let it remember any super user prompts
Open goo manager an go to menu in goo manager and at the main menu and select Install open recovery script. (or you can select download a rom. It will do the same thing) It will ask if you have recovery installed CHOOSE Try to find one for me and select YES,
Select Yes again on next pop up and wait for it to download.(it takes a minute)
If you wanted CM7 you are finished…return to the home screen and Enjoy. You can save your SD cards you made in a safe location or reformat them with the Sdformater and re use them.
If your goal was to get JB (CM10) continue
There will be other ways of doing this but this is how it worked best for me.
Go to your app drawer and open rom manager, choose install rom from sd card, (remember you still have CM10 on your card that’s installed.)
It will bring up your choices, Choose sgt-10-20121124-UNOFFICAAL-acclaim.zip.
(read this before continuing)
Click OK to reboot in recovery
When the ‘n” disappears it will show cyan boot universial boot loader. When you see this, HOLD the ‘hard “n” button down until the boot menu appears.
Use the “n” button and select internal eMMc Recovery and hit the POWER button.
You are now in teamwin recovery,
Choose install select sgt-10-20121124-UNOFFICAAL-acclaim.zip
On the next screen choose add more zips
Select gapps-jb-20121011-signed.zip
Swipe at the bottom to confirm Flash
Wait… Once it says complete reboot. (may take several minutes be patient) wait for upgrades. Now would be a good time (if you haven’t already) to re visit all the great threads we visited and donate any amount to all the great people out there that made it possible for me to type up this how to.
As a side note, I would like to mention that I'm sure that there are other rom's out there that works as well as the ones I used. I simply noted them because I used them & they worked for me. Please feel free to comment on any other rom's that work with this method and provide info so anyone reading can show other devs some gratitude too.
Enjoy and if you found this to be a complete how to and enjoyed the process then fell free to donate to me too :good:2Thanks for the thread.
Maybe you could simplify a few things and also comment on how to directly root + go to JB from a stock NT. Basically this is what you would do (just did one NT tonight in less than 15 minutes):
- Write NT16or8gbV47SDimagefile.img onto SD using Win32DiskImager.exe included in SD_ROOT_NT16or8gbV4_7.zip. This can be done on your PC if you have a SD card reader or by mounting the SD in the NT. You do not need to repartition the SD first or even format it (unless it has no partition at all of course). Writing the image will create the partition. You may want to simplify these steps in your guide!
- Copy flash_CM9-10_CWM_v6.0.1.2_8-16gb_tools_emmc.zip to the SD from http://xdaforums.com/showthread.php?t=1640958
- Boot the NT on SD by turning the tablet off and plugging the USB charger (you mention plugging to the PC which is fine too of course).
- From CWM install root_8gb-or-16gb-NTV4_7.zip (to root the NT)
- From CWM install flash_CM9-10_CWM_v6.0.1.2_8-16gb_tools_emmc.zip (to install CWM in internal eMMC)
- Turn off NT. Remove SD from NT. Repartition and format SD. Copy CM10 + gapps on SD.
- Install SD in NT. Boot and keep the n button depressed on the cyanoboot to access boot menu.
- Choose Internal eMMC Recovery.
- From CWM install CM10 + gapps after wipe.2
Yep you are correct as Satan89 stated, Just a reminder that there are good guides to return to stock os if need be after you have installed CM.1This is how I rooted & installed CM10/JB on my nook 8GB 1.43 Tablet. This will also work on a 16 GB Tablet as too but I have not testedon the 16gb. I have it currently rockin my wifes nook and doing one for my kid for Christmas. So far it's shown to be stable with no known issues. This is NOT FOR NOOK COLOR OR ANY OTHER VERSION OF NOOK OTHER THAN NT 4gb or 16gb running 1.4.3. So if you do not have these models and proceed it is at your own risk as well.
1st and for most,
I am just a shlub that searched ALL over for a good "how to" and after several attempts said if I figured out how to do it I would write one so I could share some joy.
The true thanks go to all the great Devs out there that put all these tools and roms together so we could use them. Be sure to pass along thanks & or DONATIONS to ALL deves and threads used in this how to, it's thier brains out there making our devices sweet.
There is a lot of how 2's for this NT but I found them to be terribly over complicated and frankly wore my self out looking for the "best" one. So this one looks log but that's because I wrote a start to finish and tried to be as noob friendly a possible by including every step.
All of this is done with WINDOWS, (sorry all the others, keep looking or adapt)
STANDARD DISCLAIMER, TRY ALL OF THIS OF YOUR OWN FREE WILL, THERE IS ALWAYS A CHANCE TO BRICK YOUR DEVICE AND RENDER IT USLESS!!!
I nor anyone mentioned in this thread assumes any responcibility for what you are about to accomplish.
I do wish to express my thanks again to everyone involved and to XDA for allowing all of this to be possible. In the event you do "brick" your device or have reason to return to stock to start over there are very good threads for returning your NT to stock and updating to 1.4.3 so don't be affraid. This is a "perminate root" and not a boot from SD card but can be reversed using the return to stock method.
If you do not have a Gmail account create one now (you will need it)
Turn on your new nook tablet and go ahead and register the device and use your gmail account.
Create a folder on your deshtop and DOWN LOAD THESE TOOLS to the new folder,
SD CARD Formatter
https://www.sdcard.org/consumers/formatter/
SD card Partition tool
http://www.partitionwizard.com/free-partition-manager.html
DISK IMAGER
http://www.softpedia.com/progDownload/Win32-Disk-Imager-Download-173006.html
You can go ahead and unzip/extract tools to the same folder some may want to install, so just let them and follow promps.
Some of this you may already have, but after reading a lot and having to jump from thread to thread because some guides don’t include everything I am providing it all start to finish.
OK you have some tools so lets play,
Get your self a sandisk class 4 or 6 MINI SD card with adapter, (1gb would do it if you have 2 but I'd say 4 GB min)
Classes are for speed below 4 is Peeew, & I found 10 to be too fast for the NT but will work. 6 is optimal and I used a 4 and it works like a champ. (On the card itself it will have a C with a number in it, that’s where to find the class).
TIP: to make this a little easier I would also recommend using 2 cards 1 bigger one for roms and to use in your NT everyday and a small one for CWM. If not one will do but will have a few more steps towards the end.
1) Take the SD card (smaller one if you got the extra one) and place it in the PC, MAKE A NOTE OF THE DRIVE LETTER THATS ASSIGNED TO IT!! and
Open up the SDFormatter Select the drive letter for your card. click option, Select format type and choose FULL ERASE and click format then ok and wait until it's done. Click OK again and close the window.
2) Take out SD CARD from PC and then put it back in (again take note of the DRIVE LETTER).
Then open up Mini Tool Partition wizard, Click ok
You should see A disk at the top, THIS IS YOUR PC DO NOT DO ANYTHING TO THIS DISK...EVER...There may be others depending on what you have on your PC.
Look in the lower portion for the disk that has the DRIVE LETTER you made a note of is step 1. This is you SD card so it should have about the same capacity as what your using (4gb SD=3.69 one mine) . Click on that disk. (mine says Disk 2) click it.
On the left pane click Delete All Partitions and answer yes,
Below the disk where you last clicked you will either see your drive letter or a sybol like *: and it will be unallocated,
CLICK IT and then CLICK create partition on the left pane.
Beside CREATE AS choose and pick Primary from the drop down.
Beside FILE SYSTEM select FAT32 from the drop down.
On the bottom portion go to PARTITION SIZE and click in the box with the numbers to the right of it and change to 70Mb Then back up top where it says PARTITON LABEL and type boot
Click OK, and then look for the big red checkmark up top and click APPLY and YES in the pop up, wait a minute or so for the pop up then select OK after it's done, This will still show some unallocated but don’t worry about formatting it for now.
Now RIGHT click on that partition that says (your drive letter) :bootand go to modify and click on ACTIVE and then CLICK the red APPLY check mark again, then yes, then ok.
You can close that window and leave the SD card in the computer for now,
Get ready to hop around to get some more files. I provide the links to the devs threads so you can get updates and spread the love and thanks,
(don’t forget to thank them and feel free to donate, this would not be possible without their work)
Get some more downloads Save to folder on desk top and take a break while they download,
G to Albert’s thread below and grab Download File SD_ROOT_NT16or8gbV4_7
http://xdaforums.com/showthread.php?t=1439630
Albert does great work and may update so be sure to visit his site and also view his video's, don’t forget to buy Albert a cup of coffee or something for his work.
Go to your folder of downloads and unzip/extract the SD_ROOT_NT16or8gbV4_7 zip to “here” or to the same folder.
3. Power OFF your NT
The SD card should still be in your computer, Go ahead and pull it out and place the SD card in your Nook Tablet
4. Connect Nook Tablet with the cord that came with the NT to your PC (if you have never rooted before auto mount should already be on if the NT doesn't show up turn on auto mount)
It may show a pop up that says to format SD card. DO NOT, just click the red X to make that pop up go away.
It may install drivers, not necessary but let it if it does.
5. Go to computer or my computer from your windows start menu notice how it says BOOT: (drive letter mine is F) and it also shows MY NOOK (drive letter)
You can close that window now, Just want you to be aware of the “MY NOOK” so you DO NOT SELECT that one. ..EVER
6. Go to Win32diskimager.exe file that should be in your download folder. If you did not extract/unzip yet, do that now to “here” or to the same folder your in.
Then open win32diskimager-binary folder it created,
look for win32diskimager and double click select yes if you get a permission pop up.
7. Click the drive letter under device and select the drive letter that we named boot, (mine was F) DO NOT SELECT THE DRIVE LETTER THAT SAYS “MY NOOK” THAT IS THE ENTERNAL SD CARD ON NOOK ***DON’T SELECT MY NOOK!!!!
8. Click on Blue folder, NT16or8gbV47SDimagefile.img should show up.
If it does not click on desktop on left pane and search for it in the folder you created. Once found click on it then click save.
9. Click Write select yes on pop up. When done click OK on pop up that says write successful.
10. Disconnect Nook. Your card is made. Remove card and close those windows.
11. Get the rom’s and Prepare you other SD card, that you plan to use for an external SD for your NT.
If you are using only 1 card for this it’s a little more work but . Go ahead and download these roms and read ALL of step 12 and 13 before proceeding.
Get the rom’s, Go to this thread and get the CM 7 Team B rom it will be called> Download HERE MD5 95043b08484aa218ccf93b5ef4785825
http://xdaforums.com/showthread.php?t=1481826&highlight=team+b
(Don’t forget to spread the love here either)
Then go to gapps here http://goo.im/gapps/
And download a new version of gapps, I used
gapps-gb-20110828-signed.zip
This is a good stable ROM (wife preferred) BUT
If you want a JB rom get those from from the below thread but still download the CM7 rom from above as you will need it for JB.
http://xdaforums.com/showthread.php?t=1877217&highlight=cm7
I used
http://celticstorage.co.uk/cm10/sgt7...AL-acclaim.zip
And get gapps from the same thread, again I used
http://goo.im/gapps/gapps-jb-20121011-signed.zip
(Again, some more hard workers here, show them some love... )
12.Prepare the new SD Card,
If it is a used card use the Sdformatter tool to erase format the card same way as above.
If it is new card this is not necessary.
Place the NEW or reformatted SD card in the card reader and into your PC.
Drag and drop, If you are just wanting CM7 drag and drop that zipped folder along with the GB gapps zipped folder to the NEW or reformatted SD card ,
If you are going to install the JB rom ALSO drag and drop the CM10 unzipped rom and unzipped JB gapps to the NEW or reformatted SD card .
13. Take a deep breath…. Were almost there.
POWER OFF the Nook Tablet
Place the 4gb SD card (1st one we worked with that we wrote the NT16or8gbV47SDimagefile.img on) into the nook tablet.
Connect the NT to your PC, you will see a Brown box, DO NOT do anything, wait and it will bring up your boot menu.
Tab down to install zip from SD card and hit the “hard“ button on the bottom center (actually right center when holding horizontal) of the NT to select.
Select choose zip from sd card and and and hit the “hard“ button on the bottom center (actually right center when holding horizontal) .
Select ONLY THIS file. root_8gb-or-16gb-NTV4_7
Tab down to YES -install choose root_8gb-or-16gb-NTV4_7 and hit the “n” button (same one as always)
Wait, when it is done it should return to the menu and say install from sd card complete at the bottom of the screen.
Hit the power button once and it should return to reboot system now, (but don’t select reboot)
AT THIS POINT REMOVE 4GB or smaller SD CARD (if you opted to only use one SD card at this point you would use the 4gb and do step 12. Using it then proceed to step 14)
14. PLACE THE NEW NEW or reformatted SD card WITH THE ROM ZIP FILES WE JUST MADE.
Use the volume buttons on the NT and
Tab down to install zip from SD card and hit the “hard“ button on the bottom center (actually right center when holding horizontal) of the NT to select.
Select choose zip from sd card and and and hit the “hard“ button on the bottom center (actually right center when holding horizontal) .
Now no matter what rom you will end up with first choose cm-7-TEAM-B-BETA1-signed zip, and hit the “hard“ button on the bottom center (actually right center when holding horizontal)
Tab down to YES -install choose cm-7-TEAM-B-BETA1-signed zip and hit the “n” button (same one as always)
Wait.. it will take a little bit to install, when it is done it should return to the menu and say install from sd card complete at the bottom of the screen.
NOW select choose zip from sd card again and hit “n” button
Select gapps-gb- (MAKE SURE TO SELECT GAPPS-GB) for CM7 rom. Hit “n” button
Select YES-install gapps-gb hit “n” button
Wait, when it is done it should return to the menu and say install from sd card complete at the bottom of the screen.
Now you should know how to navigate the screen so,
select wipe data/factory reset. Hit “n “ button Select yes.
Select wipe cache partition Hit “n “ button Select yes.
Select advanced hit “n” button
Select Wipe Dalvik cache Hit “n “ button Select yes.
Tab down and select go back, hit “n” button
Disconnect NT from PC and select reboot system now and hit the “n” button
WAIT… this could take several minutes,
Once this is done you will end up on the set up screen.
Set it up using your gmail account, it will more than likely tell you, you must connect to wifi. Do it. Then proceed with set up.
Once the google market comes on line wait it should kick you out and return to finish set up.
Follow the prompts and finish. Once complete you should now have the ‘Play Store” app on your screen.
Go there accept agreement and search for Rom Manager.once found in play store It should say UPDATE, do the update.
Now search for goo manager from the play store and install. Allow and let it remember any super user prompts
Open goo manager an go to menu in goo manager and at the main menu and select Install open recovery script. (or you can select download a rom. It will do the same thing) It will ask if you have recovery installed CHOOSE Try to find one for me and select YES,
Select Yes again on next pop up and wait for it to download.(it takes a minute)
If you wanted CM7 you are finished…return to the home screen and Enjoy. You can save your SD cards you made in a safe location or reformat them with the Sdformater and re use them.
If your goal was to get JB (CM10) continue
There will be other ways of doing this but this is how it worked best for me.
Go to your app drawer and open rom manager, choose install rom from sd card, (remember you still have CM10 on your card that’s installed.)
It will bring up your choices, Choose sgt-10-20121124-UNOFFICAAL-acclaim.zip.
(read this before continuing)
Click OK to reboot in recovery
When the ‘n” disappears it will show cyan boot universial boot loader. When you see this, HOLD the ‘hard “n” button down until the boot menu appears.
Use the “n” button and select internal eMMc Recovery and hit the POWER button.
You are now in teamwin recovery,
Choose install select sgt-10-20121124-UNOFFICAAL-acclaim.zip
On the next screen choose add more zips
Select gapps-jb-20121011-signed.zip
Swipe at the bottom to confirm Flash
Wait… Once it says complete reboot. (may take several minutes be patient) wait for upgrades. Now would be a good time (if you haven’t already) to re visit all the great threads we visited and donate any amount to all the great people out there that made it possible for me to type up this how to.
Enjoy and if you found this to be a complete how to and enjoyed the process then fell free to donate to me too :good:
Very good guide!! You did very good on it!1
Woohoo! Well, half woohoo anyway... I don't know anything about a WiFi bug. Try a reboot. No idea why that would work, but that's always what I try first when something misbehaves. Surprisingly often it works!
