• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[not in development] [ROM][PORT] eXnos ROM [7.1.1] J1 2016 {sm-120g/f/ds } Touchwiz port

Search This thread

[email protected]

Senior Member
Jun 13, 2021
123
79
Samsung Galaxy J1
POCO M3
Don't get me wrong!!! But you gave up halfway through!!! Despite your long work, I understand that you tried for the sake of interest!!! But the things that are done to the end are different and the soul is calm and people are pleased!!! If someone agrees, put laikee
well bro i also wanted to finish this project, but life isn't just easy there is a lot of things going on in my life.

and from my heart i failed may be 7,000 times before making this rom work but i don't give up. it is my years of hard-work.

but you know sometimes it's best to give up cause nobody cares !!!!!!!!

i have seen a lot of hard times now and i think it's better to give up because i don't want to loose my-self.

well i don't have much friends that's why i replied you as a friend, and sorry if i broke your hope for a better rom.
 
  • Like
Reactions: Dimaop

Dimaop

Member
Jul 6, 2021
13
4
Samsung Galaxy J1
well bro i also wanted to finish this project, but life isn't just easy there is a lot of things going on in my life.

and from my heart i failed may be 7,000 times before making this rom work but i don't give up. it is my years of hard-work.

but you know sometimes it's best to give up cause nobody cares !!!!!!!!

i have seen a lot of hard times now and i think it's better to give up because i don't want to loose my-self.

well i don't have much friends that's why i replied you as a friend, and sorry if i broke your hope for a better rom.
When it seems to you that the whole world is against you, remember that the plane takes off against the wind.
 

Xdex Land

Member
Sep 4, 2021
5
1
здравствуйте У меня проблема Я не могу установить эту прошивку на свой телефон Samsung o1 120a когда я установил прошивку, она бесконечно перезапускается Я не знаю, с чем это связано пожалуйста, скажите мне

Translated by GT: hello I have a problem I cannot install this firmware on my Samsung o1 120a phone when I installed the firmware it restarts endlessly I don’t know what is the reason please tell me
 
Last edited by a moderator:

Dimaop

Member
Jul 6, 2021
13
4
Samsung Galaxy J1
здравствуйте У меня проблема Я не могу установить эту прошивку на свой телефон Samsung o1 120a когда я установил прошивку, она бесконечно перезапускается Я не знаю, с чем это связано пожалуйста, скажите мне

Translated by GT: hello I have a problem I cannot install this firmware on my Samsung o1 120a phone when I installed the firmware it restarts endlessly I don’t know what is the reason please tell me
you need to update TWRP
 

[email protected]

Senior Member
Jun 13, 2021
123
79
Samsung Galaxy J1
POCO M3
здравствуйте У меня проблема Я не могу установить эту прошивку на свой телефон Samsung o1 120a когда я установил прошивку, она бесконечно перезапускается Я не знаю, с чем это связано пожалуйста, скажите мне

Translated by GT: hello I have a problem I cannot install this firmware on my Samsung o1 120a phone when I installed the firmware it restarts endlessly I don’t know what is the reason please tell me
tell full model no of phone,
is it samsung j1 4g 120A?
 
  • Like
Reactions: Xdex Land

Xdex Land

Member
Sep 4, 2021
5
1
здравствуйте, моя модель телефона samsung j1 2016 4g 120f

Translated by GT: hello my phone model is samsung j1 2016 4g 120f
 
Last edited by a moderator:

Soyabkhan

Member
Mar 21, 2017
16
5
Redmi Note 10
sorry bro but it is for samsung j1 120 modle no g, f and ds. not for h as it has different processor.
Hey, awesome work bro, thanks for making this port for our device. I installed a bigger display of another samsung in this device can i some how increase its default size to new display size so that i can use it.
 

Attachments

  • IMG-20210924-WA0009.jpg
    IMG-20210924-WA0009.jpg
    86.8 KB · Views: 12
  • Love
Reactions: [email protected]

[email protected]

Senior Member
Jun 13, 2021
123
79
Samsung Galaxy J1
POCO M3
Hey, awesome work bro, thanks for making this port for our device. I installed a bigger display of another samsung in this device can i some how increase its default size to new display size so that i can use it.
thanks for such kind words, but can you send more photos of device like when settings< about phone is open and also tell me of which model is the display so that i can make it fill the whole screen.
 

Soyabkhan

Member
Mar 21, 2017
16
5
Redmi Note 10
thanks for such kind words, but can you send more photos of device like when settings< about phone is open and also tell me of which model is the display so that i can make it fill the whole screen.
It has display of j2 which screen dimensions i sended you in attachment and thanks for your help
 

Attachments

  • Screenshot_20210929-140124207 (1).jpg
    Screenshot_20210929-140124207 (1).jpg
    54.5 KB · Views: 2
  • Like
Reactions: [email protected]

Top Liked Posts

  • There are no posts matching your filters.
  • 1
    hello sir, this works on sm-j120H?
    1
    sorry bro but it is for samsung j1 120 modle no g, f and ds. not for h as it has different processor.
    Hey, awesome work bro, thanks for making this port for our device. I installed a bigger display of another samsung in this device can i some how increase its default size to new display size so that i can use it.
    1
    thanks for such kind words, but can you send more photos of device like when settings< about phone is open and also tell me of which model is the display so that i can make it fill the whole screen.
    It has display of j2 which screen dimensions i sended you in attachment and thanks for your help
    1
    which rom are you using exnos 7.0 or stock 5.0

    also, include screenshot of about phone section
    Exnos 7.0 and my device is at home and i am at work now so i send you screenshots later
  • 10
    { not in development }

    WELCOME

    This is my first thread so, pardon me for any error in writing style. { i will try my best }

    Proudly, Presenting before you a port of on5pro originally ported by @comrade79 for j2 2015.
    Kernel, from This ROM by
    @cıyanogen.

    NOTE :- Credit for porting ROM originally for j2 2015 goes to @comrade79, I have ported it to j1 2016. kernel is by @cıyanogen ROM.

    So, lets begin the features,
    • based on stock On5pro G550FYXXU1CRF1​
    • supports VoLTE​
    • AOD, init.d and game optimization​
    • multi windows​
    • stock, no root { you can flash magisk for root }​
    • Aroma Installer, option to choose CSC, remove unwanted apps and to backup EFS partition.​
    • full themes support​
    • stable, ready to be used as daily driver, see bugs below.​
    • faster than stock 5.1.1​
    • otg support​
    • charging animation and awesome lock screen​
    • much more find out your self......​
    Bugs
    1. camera and flash { tried all my knowledge but was not able to fix} { fell free to fix it }​
    2. nothing some minor bugs....​


    Contributors

    @comrade79
    @cıyanogen
    @lzzy12
    @TBM 13
    @bengris32
    @imranpopz
    and me @[email protected]
    (If i forgot any person, please pm me, i'll add you to this list)

    Installations
    • reboot into TWRP recovery​
    • choose zip file and slide to begin installation.​
    • inside aroma installer choose appropriate setting you like​
    • don't forget to select backup EFS and soft reset option.​
    • after installing rom wait patiently for 20-25 minutes just for first boot​
    • and ignore kernel is not seandroid enforcing warning.​
    • after booting up enjoy the best nougat rom for your device.​
    • please donate me so that i can develop much more for you guys thanks.​
    Donation
    A small donation of rs.100 will also help me develop even more so please donate.
    UPI:- scan the UPI code

    Screenshot_2021-06-11-19-23-41.png


    Downloads
    update v1.2

    Updates
    v1.0-------> initial dev build {6/07/2021}
    v1.1-------> initial public build {6/14/2021}
    v1.2-------> fixed themes issue {6/16/2021}

    XDA:DevDB Information
    [PORT][ROM] eXnos ROM [7.1.1] Touchwiz port on5pro

    Contributors

    @cıyanogen, @lzzy12, @TBM 13,@bengris32, @imranpopz @comrade79
    Source Code: https://github.com/ciyanogen/android_kernel_samsung_j1xlte

    ROM OS Version: 7.1.1 Nougat
    ROM Kernel: Linux 3.10.x
    Based On: Touchwiz

    Version Information
    Status:
    Stable

    Created 6/14/2021
    Last Updated 6/16/2021

    sorry guys i have my exams (pray for me) i will make camera fix on may be September.
    4
    If you are a developer then please help me to fix the camera and flash. it will help all of us J1 2016 users to have a fast, better and new life for our phones.
    3
    well, guys v1.3 is coming and my friend @cıyanogen has made android 10 for us go ahead and install very first android 10 for our device.

    3
    no, donation and i don't think many active user are there for this phone. everybody think to use eleses work and nobody supports. i am abounding this project.
    Don't get me wrong!!! But you gave up halfway through!!! Despite your long work, I understand that you tried for the sake of interest!!! But the things that are done to the end are different and the soul is calm and people are pleased!!! If someone agrees, put laikee
    3
    Nice rom.
    Fast, stayable, plz fix the camara. Other things seems ok. Sry for my bad English.😞
    thanks for such motivational words, camera fix is in progress but i don't have enough support and donations to continue this project. we will see if this post get 100 likes then we will continue camera development.