EDIT: Everything booted up after while, just took a really long time for it to completely boot.
I had my xt1060 Verizon Dev Edition rooted and unlocked running Android 5.1. I wanted to flash it back to factory, so I downloaded "XT1060_GHOST_VERIZON_5.1_LPAS23.12-39.7-1_cid2_CFC.xml.zip" from firmware.center. Then I used the commands from Motorola's Restore to Factory guide, to flash the files.
That caused a bootloop to occur and have the screen to stay at the warning bootloader unlocked screen. So then I downloaded "XT1060_GHOST_VERIZON_5.1_LPA23.12-39.7_cid2_CFC.xml.zip" and tried that, and still the same thing.
I had an old copy of "MOTXT1060DEV_4.4-13.11.1Q2.X-69-3_1FF-CID2.xml" which I've used before to flash back to factory and I tried that. And now whenever I try to boot it up, it'll go into motorola's recovery and the image of the Android opened up keeps flashing on the screen, assuming that it's in a bootloop.
Up until this point I've been using osx-fastboot to flash the files, so I pulled out my old Windows laptop which had a copy of RSD Lite in it, and attempted to flash "XT1060_GHOST_VERIZON_5.1_LPAS23.12-39.7-1_cid2_CFC.xml.zip", which I tried the first time. I was able to get through that successfully, however it still did the same thing as before where the recovery was stuck in a bootloop.
I found this thread on here, and I followed the instructions for RSD Lite and the manual flash, neither worked did the same thing as when after I tried RSD Lite the first time. However the manual flash got farther, but is just sitting at the Verizon boot screen, and that's where it is right now for the last 15 minutes.
I had my xt1060 Verizon Dev Edition rooted and unlocked running Android 5.1. I wanted to flash it back to factory, so I downloaded "XT1060_GHOST_VERIZON_5.1_LPAS23.12-39.7-1_cid2_CFC.xml.zip" from firmware.center. Then I used the commands from Motorola's Restore to Factory guide, to flash the files.
That caused a bootloop to occur and have the screen to stay at the warning bootloader unlocked screen. So then I downloaded "XT1060_GHOST_VERIZON_5.1_LPA23.12-39.7_cid2_CFC.xml.zip" and tried that, and still the same thing.
I had an old copy of "MOTXT1060DEV_4.4-13.11.1Q2.X-69-3_1FF-CID2.xml" which I've used before to flash back to factory and I tried that. And now whenever I try to boot it up, it'll go into motorola's recovery and the image of the Android opened up keeps flashing on the screen, assuming that it's in a bootloop.
Up until this point I've been using osx-fastboot to flash the files, so I pulled out my old Windows laptop which had a copy of RSD Lite in it, and attempted to flash "XT1060_GHOST_VERIZON_5.1_LPAS23.12-39.7-1_cid2_CFC.xml.zip", which I tried the first time. I was able to get through that successfully, however it still did the same thing as before where the recovery was stuck in a bootloop.
I found this thread on here, and I followed the instructions for RSD Lite and the manual flash, neither worked did the same thing as when after I tried RSD Lite the first time. However the manual flash got farther, but is just sitting at the Verizon boot screen, and that's where it is right now for the last 15 minutes.
Last edited:
