[Note 9][OneUI Pie][JetBlackUI][03-Jan-2020][v22] LightROM

Hey Users!!! Is this thread useful... :)


  • Total voters
    155

bilal49er

Member
Jan 8, 2010
28
1
0
I must've done something really simple wrong but can't figure it out yet.. I am running ketan's P14 ROM but as this was newer and updated to latest I wanted to give this ROM a try again but no mater what I do it hangs in a kernel boot loop.

I am using OrangeFox and tried the TWRP from the all-in-one pack as well but neither seems to work for me. Also the order of installing, first ROM and then all-in-one or first all-in-one and then ROM, didn't make a difference for me.
Flashing a nandroid backup from ketan p14 boots right away as does a clean install of P14 with the matching BL & CP.. wierd..

Checksum of the zip is fine as well.
Me too...stuck in bootloop although im coming from v19 but....
there's something wrong with stock kernel in v20 build...phone gets stuck in bootloop if u flash stock kernel in aroma...
i tried with endurance kernel (which i dont like though) and it booted perfect
then i tried TGP within aroma and this time it also worked
just to re confirm, tried stock kernel in aroma, and again bootloop!!
WEIRD!
 
Last edited:

Imprezzion

Senior Member
Dec 12, 2011
570
200
63
Gorredijk
Me too...stuck in bootloop although im coming from v19 but....
there's something wrong with stock kernel in v20 build...phone gets stuck in bootloop if u flash stock kernel in aroma...
i tried with endurance kernel (which i dont like though) and it booted perfect
then i tried TGP within aroma and this time it also worked
just to re confirm, tried stock kernel in aroma, and again bootloop!!
WEIRD!
That would explain a lot. Only thing I didn't try was a different kernel as I didn't download a new enough version of Beastmode yet.
 
  • Like
Reactions: bilal49er

bilal49er

Member
Jan 8, 2010
28
1
0
Magisk is also not properly implemented, even though it's selected in aroma.
It doesn't get installed and you have to flash magisk manually.

---------- Post added at 02:40 PM ---------- Previous post was at 02:36 PM ----------

Anyone experiencing problems downloading All in One BL/modem zip (TWRP)?
My AFH keeps searching for mirrors and returns an oops! error after a while
 

bypass83

Member
Jun 16, 2012
16
2
0
Please give a try to orange fox 1.2 andclean install rom again that fix my bootloop matter

---------- Post added at 03:28 PM ---------- Previous post was at 03:26 PM ----------

The rom is impressively lights. battery friendly with zeus kernell thé best ive tried thks Really much for your work
 

yash92duster

Senior Member
Jan 31, 2015
13,137
15,826
263
Chennai
There is something wrong with latest BL/Modem files. Stock kernel doesnt work if u flash latest BL/Modem as provided. Even with TGP kernel, there are random freezing issues. Kindly look into this brother....
Its stock bootloader and modem as provided with stock firmware. I can't check what's inside those files. It is as it is.
 

bilal49er

Member
Jan 8, 2010
28
1
0
There is something seriously wrong..
1. I'm unable to flash stock kernel in Aroma. Results in bootloop. Any other kernel, the phone boots but random freezing. I've made a complete wipe of everything in TWRP but still the issue persists.
2. Weird options have appeared in settings. See attached image. Half of them dont work, half work but randomly.
 

Attachments

bober10113

Senior Member
Mar 12, 2017
4,457
1,617
113
There is something seriously wrong..
1. I'm unable to flash stock kernel in Aroma. Results in bootloop. Any other kernel, the phone boots but random freezing. I've made a complete wipe of everything in TWRP but still the issue persists.
2. Weird options have appeared in settings. See attached image. Half of them dont work, half work but randomly.
what exact twrp version do you use? also what exact phone model do you have?
 

yash92duster

Senior Member
Jan 31, 2015
13,137
15,826
263
Chennai
There is something seriously wrong..
1. I'm unable to flash stock kernel in Aroma. Results in bootloop. Any other kernel, the phone boots but random freezing. I've made a complete wipe of everything in TWRP but still the issue persists.
2. Weird options have appeared in settings. See attached image. Half of them dont work, half work but randomly.
What's your csc?
 

Imprezzion

Senior Member
Dec 12, 2011
570
200
63
Gorredijk
What's your csc?
I have these same options on my install. I use the TWRP BL and CP from your all-in-one package and I use PHN CSC (Netherlands) but the wierd thing is, everything else works, no crashes or whatever as long as I use BeastMode r81 kernel and not stock.

When I check CSC in Phone Info it says: Original CSC: PHN. Firmware CSC: AUT and then CSC version under software tab is empty?

Also, checking about phone - software - service provider SW version is also empty so it looks like it somehow erased my CSC.

Wierdest part is, all normal CSC features like VoLTE, VoWiFi, recording and so on just work fine..
 

bilal49er

Member
Jan 8, 2010
28
1
0
I have these same options on my install. I use the TWRP BL and CP from your all-in-one package and I use PHN CSC (Netherlands) but the wierd thing is, everything else works, no crashes or whatever as long as I use BeastMode r81 kernel and not stock.

When I check CSC in Phone Info it says: Original CSC: PHN. Firmware CSC: AUT and then CSC version under software tab is empty?

Also, checking about phone - software - service provider SW version is also empty so it looks like it somehow erased my CSC.

Wierdest part is, all normal CSC features like VoLTE, VoWiFi, recording and so on just work fine..
yeah right....almost similar problem with me regarding CSC and it all started when i flashed BL/CP from all in one package in TWRP yesterday.
I tried going back to stock via Odin and it gets stuck at flashing boot.img..
Now what?:crying:
 

bober10113

Senior Member
Mar 12, 2017
4,457
1,617
113
yeah right....almost similar problem with me regarding CSC and it all started when i flashed BL/CP from all in one package in TWRP yesterday.
I tried going back to stock via Odin and it gets stuck at flashing boot.img..
Now what?:crying:
flashing bootlaoder in twrp has been know to cause issues like this.

use odin to flash back latest BL.md5 or full stock (latest october build, use samfirm tool or frija to dl latest firmware unzip to find individual firmware files) then re root/twrp again from scratch if you flashed full stock following dr ketans method 1 guide.
 
Last edited:

Imprezzion

Senior Member
Dec 12, 2011
570
200
63
Gorredijk
yeah right....almost similar problem with me regarding CSC and it all started when i flashed BL/CP from all in one package in TWRP yesterday.
I tried going back to stock via Odin and it gets stuck at flashing boot.img..
Now what?:crying:
Fixed!

Just use Frija to download the full CSI5 firmware your CSC is in (or a OXM multi-CSC like HOME_CSC_OMC_OXM_N960FOXM3CSI1_CL16685647_QB25812146_REV00_user_low_ship.tar) and flash ONLY CSC in Odin after clean flashing V21. THis restores the broken settings menu and all CSC features work again and even my Vodafone OM Customizer app started with first install like it should. My CSC now shows PHN/PHN/PHN again as normal and everything looks to be fixed.

You *might* wanna flash BL and CP too just to be sure.