General Nothing Phone (1) [ ROM ][ OTA ][ Nothing OS ] Repo of Nothing OS
- Thread starter AnotherM1m
- Start date
@Phon3nX
Reading through this thread (and other threads in this forum), I see a lot of users facing issues updating their devices, especially with root. Even I have faced issues with updating and I try different methods to fix it, but there is still no single method that works 100% of the time. Sometimes local update method works, sometimes sideloading with ADB, etc.
It would be great if you could create a guide for updating their devices with root, possibly with all the different methods and troubleshooting methods. I do not mean unlocking or rooting, but updating NP1 by keeping root access. Sure, there are a lot of individual posts on this topic spread across this forum, as threads and as comments in threads like these, but I think it would be better to have it in one of the reserved sections in the original guide thread.
Thank you and kudos for the great job you do here.
Unfortunatelly there no 100% method working, restore boot file (from Magisk or fastboot) working only if Boot Timestamp / Signature is the same asking by OTA Update/Hotfix... If it's not the same = Error 20
It's for this reason it's better to :
- Always create yourself Magisk Patched Boot from the Stock Boot
Like that, signature come from original boot file and your Magisk will create a Patched file for your device/configuration and above all when you will apply/install this Patched file, Magisk will backup the original Boot.
If you flash directly a new Magisk Boot file from a user or this topic without boot/patch yourself this file with the "flash" command you can encounter bootloop but above all your Magisk doesn't create a backup from the original boot because Magisk has never patched this boot.
In some case the only solution is clean flash to the last Full Firmware available (so 1.1.7) and from this proper base update firmware and patch. I do that for the first Beta 1.5, i can't install this Beta from 1.1.7 even after restore boot. From now update work easily from OTA/Hotfix by restoring boot image.
PS : Topic updated with NOS 1.1.8 & NOS 1.5.1 Beta Hotfix links
Last edited:
Thanks for the reply!
As I said in my post, I am fine with flashing, so even if something bad happens I can get my device back to working condition. Even if I lose root while updating, I can easily root it again. But I only posted this since first time root users may encounter some issues and they'll have to go through all the trouble of flashing everything from a bootlooping device. Maybe all of this will be solved if a working custom recovery is available. Till then, I guess we'll have to try whichever method works for our device.
Thanks for the wonderful work you do here. Much appreciated.
i installed the 1.5 beta 1 from the local system update and it went fine.
now i want to install the beta 2 update but im getting "Error applying update: 23 (kDownloadManifestParseError)".
i tried installing the update from the local system update but nothing happens
now i want to install the beta 2 update but im getting "Error applying update: 23 (kDownloadManifestParseError)".
i tried installing the update from the local system update but nothing happens
Hello,
@Pho3nX post#1 is linking 1.5.1 and 1.5.1 hotfix to the same file; hotfix is smaller in size
@Pho3nX post#1 is linking 1.5.1 and 1.5.1 hotfix to the same file; hotfix is smaller in size
Last edited:
Create Magisk Patched Boot by yourself from the stock boot img.
Like i said, all Nothing devices doesn't have exactly the same components / signature.
For sure Magisk will patch properly the stock boot especially for your device.
You're rooted ? If yes restore images (boot) from Magisk and retry
If it doesn't work for you, or doesn't have "restore images" available in Magisk, you have only two possibilities :
1/ Clean flash (not just a Factory reset, storage must me erased) to the last Stable NOS firmware (so 1.1.7) > Update 1.5 > And update OTA, it will work perfectly with a proper base
2/ Simply wait a Full Firmware 1.5.X Beta (but not available for now), you will update without problem, Full firmware do not have the same signature restrictions than OTA update.
No, I did not root. I was not able to downgrade to 1.1.7 Stock , I have a custom rom now. What's proper way to flash the 1.1.7 stock over custom rom ? I appreciate any tips
Hi Guys, when new OTA beta available would it be possible to install it via phone search for update...or still side load etc... required.?
is the system going to catch availability on NEW OTA? even if not part of beta program.
Thank YOU!
is the system going to catch availability on NEW OTA? even if not part of beta program.
Thank YOU!
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
3
English please but thanks for the heads upDalší aktualizace.... Hotfix
Informace jsou z Facebooku!
Ps: Ještě jsem neobdržel aktualizaci 1.5.3! Česká republika EU
1.5.3 HOTFIX just released
I COULD NOT update and keep root. I did magisk ota installation but at reboot i was bootlooping.
So i did the update as stock with unlocked bootloader and at reboot i held vol down to boot into bootloader, booted NOT FLASHED, BOOTED the old 153 (not hotfix) magisk patched boot and did direct installation
Everything seems to be working fine, i'll let you know if i encounter any freeze.2
Downloading artifacts and installing the apk should be the right way to go, right? Because after installing apks from actions magisk manager app crashes.
In the afternoon i'll also try to logcat the device
EDIT: Magisk implements a signature check to block malicious clones, to move from official to action you should first install the debug apk found on magisk's main page, do direct install and then install the actions apks...
15:26, im trying
Force ramdisk format to lz4_legacy for v4 #2878
Action, i'll let you know if i get any crash or what
UPDATE
15:42 the device crashed with the latest action build2
No problem, i really just want a stable phone experience.
Let's wait for updates and hope for the best.
EDIT:
I've updated the first and second posts, please feel free to let me know if i've made any spelling mistake.21.5.3 incremental over 1.5.2:
https://android.googleapis.com/packages/ota-api/package/68158669e0fc6d6eee95e2612c2e84ed840faeec.zip
1.5.3 stock boot:
96 MB file on MEGA
mega.nz
1.5.3 magisk patched boot:
96 MB file on MEGA
mega.nz
DONT ROOT ATM.... SYSTEM FREEZES CONSTANTLY AFTER ROOTING 1.5.3!!! DONT KNOW WHY!2Another update.... Hotfix
Information is from Facebook!
Ps: I haven't received the 1.5.3 update yet! Czech Republic EU
-
24
Note: This is not a support thread for issues you may have with Nothing OS ROMs. If you need help installing or updating, feel free to ask here. If you have any other issues, please ask in another thread.
Regarding problems with the Phone(1), you can post in this open topic
The Nothing Phone(1) was officially unveiled on July 12th and we know a good part of the specifications of the smartphone.
- Phone(1) - Model : A063
- Initial Code Name : Abra / Global Name : Lahaina / EEA Name = Spacewar
- Android 12
Platform =>OS - Android 12 - Nothing OS
Chipset => Qualcomm SM7325-AE Snapdragon 778G+ 5G (6 nm)
- CPU => Octa-core (1x2.5 GHz Cortex-A78 & 3x2.4 GHz Cortex-A78 & 4x1.8 GHz Cortex-A55)
- GPU => Adreno 642L
Storage => 128Go & 256Go - UFS 3.1 - no card slot
Sim => Dual SIM (Nano-SIM, dual stand-by)
Network Technology => GSM / HSPA / LTE / 5G
- 2G Bands => GSM 850 / 900 / 1800 / 1900 - SIM 1 & SIM 2
- 3G Bands => HSDPA 800 / 850 / 900 / 1700(AWS) / 1900 / 2100
- 4G Bands => 1, 2, 3, 4, 5, 7, 8, 12, 17, 18, 19, 20, 26, 28, 32, 34, 38, 39, 40, 41, 66
- 5G Bands => 1, 3, 5, 7, 8, 20, 28, 38, 40, 41, 77, 78 SA/NSA
- Speed => HSPA 42.2/5.76 Mbps, LTE-A, 5G
Comms => WLAN => Wi-Fi 802.11 a/b/g/n/ac/6, dual-band, hotspot
- Bluetooth => 5.2, A2DP, LE
- GPS => Yes, with A-GPS. Up to dual-band: GLONASS (1), BDS (2), GALILEO (1), QZSS (1)
- NFC => Yes
- Radio => Unspecified
- USB => USB Type-C 2.0, USB On-The-Go
Weight => 193.5 g - 6.84 oz
Build => Glass front (Gorilla Glass 5), glass back (Gorilla Glass 5), aluminum frame
Dispaly => OLED, 1B colors, 120Hz, HDR10+, 500 nits (typ), 1200 nits (peak)
Size => 6.55 inches = 103.6 cm2 (~85.8% screen-to-body ratio)
Resolution => 1080 x 2400 pixels, 20:9 ratio (~402 ppi density)
Battery => Li-Po 4500 mAh, non-removable
=> CHARGING => Fast charging 33W, 50% in 30 min, 100% in 70 min (advertised)
=> Wireless charging 15W
=> Reverse wireless charging 5W
=> Power Delivery 3.0
=> Quick Charge 4.0
Protection => Corning Gorilla Glass 5
Camera => 50 MP Main Camera, Dual
=> 50 MP, f/1.9, 24mm (wide-angle), 1/1.56", 1.0µm, PDAF, OIS
=> 50 MP, f/2.2, 114˚ (ultra wide angle), 1/2.76", 0.64µm
=> LED flash, panorama, HDR features
=> Video recording [email protected], [email protected]/60fps, gyro-EIS, live HDR
=> Front Camera, Selfie 16 MP, Single
=> Features -16 MP, f/2.5, (wide-angle), 1/3.1", 1.0µm
=> Video recording [email protected]
Others =>
- Multiple LED lights on the back (notifications, charging progress, camera fill light)
- Blinking red light on the back (video recording indicator)
- IP53 - splash, water and dust resistant
- 3.5mm jack => No
- Loudspeaker => Yes, with stereo speakers
- Sensors => Fingerprint (under display, optical), accelerometer, proximity, gyro, compass
LATEST NEWS
Both 1.5.3 and 1.5.3.hotfix versions of NOTHING OS are currently unstable if the device is rooted and booting a magisk patched boot img.
An issue has been opened on magisk github.
For now if you want root and a stable device stick to 1.5.2, do not update until the cause of freezes is found.
HEADS UP WHILE UPDATING TO A13
STABLE ROAD TO NOS 1.5.2
Prerequisites:
Global & EEA device with NOS 1.1.8
The OTA Update file from 1.1.8 to 1.5.2, the link is down below: Global and EEA are not unified.
Global users will have no problem performing the update with the necessary precautions.
An EEA user on 1.1.7 no hotfix can update to 1.1.8 no problem.
EEA users which have 1.1.7.hotfix installed won't be able to update to 1.1.8 thus blocking the stable update procedure.
They will need to follow the beta firmware updates road.
BETA ROAD TO NOS 1.5.2
Prerequisites:
Global device with NOS 1.1.7
OR
EEA device with NOS 1.1.7.hotfix
The OTA Update file from 1.1.7(/hotfix) to 1.5.0, the link is down below.
Then from 1.5.0 to 1.5.2 perform all the needed beta updatesNOTHING OS Stable - Links to download
Global Full Nothing OS 1.0.2 | Incremental from 1.0.1 | - 15/07/2022 EEA Full Nothing OS 1.0.2 | Incremental from 1.0.1 |EEA Full Nothing OS 1.1.5 | Incremental from 1.1.5 |Global Full Nothing OS 1.1.7 Hotfix |Incremental from 1.1.7| - 15/12/2022| Global & EEA Nothing OS 1.5.2 Stable FULL | - 16/02/2023 | Global & EEA Nothing OS 1.5.3 Stable FULL || Global & EEA Nothing OS 1.5.3.hotfix Stable FULL |
NOTHING OS Beta - Links to download
Global & EEA Nothing OS 1.5.1 Beta 2 Hotfix | Incremental from 1.5.1 | - 18/01/2023 (*) From the second Beta [1.5.1] EEA & Global firmwares are now unified !
NOTHING OS - Changelog
Nothing OS 1.1.0 Changelog:
Here’s the complete changelog for the Nothing OS 1.1.0 update for the Phone 1
- New features
- Introduced experimental Tesla control feature.
- Introduced experimental NFT Gallery widget.
- We heard your feedback on the Beta Launcher – the Search Bar on the home screen is now optional.
- Camera improvements
- Glyph fill light is now available in Portrait Mode.
- Improved clarity and reduced noise when taking photos in low light environments.
- Improved dynamic range when taking photos in low light environments.
- Improved photo clarity when using the ultra-wide camera.
- Improved colour consistency across the main and ultra-wide sensors.
- Bug fixes & Performance optimisations
- Updated Android security patch to July 2022.
- Fixed a lock screen bug that would sometimes hide the fingerprint icon.
- Improved the reliability of the Glyph Interface.
- Battery life optimisations when device is on standby.
- Improved Face Unlock performance.
- General bug fixes.
Nothing OS 1.1.2 Changelog:
The complete changelog for the European Nothing OS 1.1.2 update- New features
- Added a toggle for showing the fingerprint icon when screen is off.
- Always on display will now be turned off during the night by default.
- Bug fixes & Performance optimizations
- Improved charging performance and compatibility with 3rd party chargers.
- Resolved Bluetooth codec issue.
- Optimized minor UI details.
- General bug fixes and stability improvement.
Nothing OS 1.1.3 Changelog:
The complete changelog for the European & Global Full Nothing OS 1.1.3 update- New features
- Added option to turn on Google’s Adaptive Battery to intelligently optimise battery life.
- Redesigned fingerprint verification UI for 3rd party apps.
- Camera improvements
- When using Glyph lighting, images are automatically adjusted to optimal colour and brightness.
- Impoved photo clarity when using the front camera.
- Faster Night Mode and HDR photo processing time.
- Richer colour saturation when using the ultra-wide camera.
- Reduced noise and increased sharpness when using zoom.
- Added reminder to clean the camera lenses.
- Bug fixes and performance optimisations
- Resolved an issue that caused stuttering in some apps like Twitter, Play Store etc.
- Resolved an issue that prevented mobile hotspot from working properly.
- Fixed ussye that caused the lock screen to crash after tapping on a notification and then trying to use finger unlock.
- Polished minor UI details.
- General bug fixes.
Nothing OS 1.1.4 features the following changes:
- New features
- New option to flip the 3-button navigation bar.
- All Ear (1) app features are now integrated into Nothing OS. Customize gesture controls and switch Noise Cancellation modes and more in Quick Settings and Settings.
- Now supports LHDC high-def audio.
- Camera improvements
- New option to add a Nothing themed watermark to the camera app.
- Improved ultra-wide camera colour calibration and increased colour consistency between main and ultra-wide sensors.
- New motion detection algorithm added for improved stability when shooting moving objects.
- Increased shooting speed when using HDR in ultra-wide mode.
- System improvements
- September Security Patch.
- Reduced battery consumption for Always On Display and other use cases.
- Improved thermal performance.
- New UI for system updates.
- Bug fixes & Performance optimizations
- Fixed network issues for certain carriers.
- Fixed an issue causing incoming calls to show up as Unknown Contact.
- Fixed HDFC Bank app fingerprint issue.
- General bug fixes.
Nothing OS 1.1.6 features the following changes:
- New features
- Now supports Google AR Core.
- Indian users covered by Reliance Jio can now access 5G.
- Camera
- Sharper videos with improved stability.
- Recording light indicator is now always-on by default.
- Improvements
- Optimised, more fluid Launcher experience.
- More accurate battery status.
- Increased maximum brightness when displaying HDR content.
- Updated, more reactive Flip to Glyph animation.
- Glyph charging light now synced to sound effect.
- Updated NFC sound effect.
- General bug fixes.
Nothing OS 1.1.7 features the following changes:
- New features
- Now supports battery percentage display for AirPods. You can enable it in Settings - Experimental features.
- Improvements
- Updated to October/November Security Patch.
- Improved OS fluidity and reduced stutters.
- Adjusted the thermal threshold to better balance performance and temperature.
- Improved audio quality when recording videos.
- More accurate battery status.
- Bug fixes
- Resolved an issue causing Whatsapp notifications to be unresponsive in lockscreen.
- General bug fixes.
Nothing OS 1.1.8 features the following changes:
- The full Nothing X app will now be available in Nothing OS.
- Fixed an issue causing the system to shutter in some scenarios.
- General bug fixes.
Nothing OS 1.5 Open Beta features the following changes:
This is the first version of many to come and the priority is to ensure the stability of migrating to Android 13.
- Android 13 Highlights:
- More colour schemes are availables from the wallpaper selector
- All apps must now have your permission before sending notifications
- Added a QR code scanner shortcut in Quick Settings
- Added support for setting per-app language preference
- Added the Live Caption feature which detects speech from audio output to automatically generate captions.
- Added a clipboard preview after copying text allowing the content to be edited directly from the clipboard
- Better privacy protection such as Photo picker, Nearby WiFi devices Permission, Types of media permission, etc.
- Nothing OS Improvements:
- Improved the user interaction of Network and Connectivity tiles in Quick Settings
- Reduced the wait time when loading apps
- Implemented a new self-repair feature to periodically delete unused system dumps and cache
- Optimised the smoothness of many animations throughout the whole system
- Improved the volume setting panel, allowing granular volume controls without unlocking the device
- Improved the game mode light notification and added the Google game dashboard
- Weather app beta release!
- Take an initial look at Nothing's in-house Weather app
- Tapping a weather widget on the homescreen now directly opens the corresponding city in Weather instead of opening a link
- Air Quality Index and more animations will be added in later stages
- This is the first version of the Nothing OS
1.5 Open Beta, so there are still many more features in development and you should also expect to run into some bugs and with the following:
- Google Pay and Netflix cannot be used normally.
- Pop-up view feature will not be available.
Nothing OS 1.5.1 Beta features the following changes:
A warm welcome back to the second round of the Nothing OS 1.5 beta programme! Below are some additional features that we will bring to the NothingOS 1.5 update. Additionally, congratulations to those of you have been newly selected to participate!
- Weather app beta release!
- New Nothing weather app
- Tapping a weather widget on the homescreen now directly opens the corresponding city in Weather instead of opening a link
- Weather app beta release!
- Take an initial look at Nothing's in-house Weather app
- Tapping a weather widget on the homescreen now directly opens the corresponding city in Weather instead of opening a link
- Air Quality Index and more animations will be added in later stages
Thanks for your ongoing support and contributions to our efforts in improving the Nothing OS Experience. Let's continue building Nothing together.
Nothing OS 1.5.2 Stable features the following changes:
It's finally here. Our Nothing OS 1.5 official release. As a thank you for taking part in our Open Beta, we want you to experience it first.
Experience Nothing OS 1.5, powered by Android 13. Our most significant update yet. With all new features and improvements.
- Weather app
- New Nothing weather app
- Tapping a weather widget on the homescreen now directly opens the corresponding city in Weather instead of opening a link
- Customisation
- All new Glyth soundpack for more ringtone and notification sounds.
- More colour schemes available from the walpaper selector.
- New collection of minimalist wallpapers.
- Icons can match your background colour to make your home screen look more consistent.
- Lockscreen shortcut customisations. Create shortcuts for camera, torch, device controls, and wallet.
- Improved experience
- Easily switch data usage when using dual SIM with the improved network Quick Settings panel.
- Automaticallyshow the current network and display how much mobile data you have used in Quick Settings.
- Directly scan a QR code in the Camera app. Scanner also appears as a shortcut in Quick Settings.
- Select language preferences for different apps.
- Visual improvement
- A New look for Media Control. Puts album artwork on full display with a wider set of music controls.
- Improved volume settings panel. Allows granular volume control without unlocking the device.
- Improved Game mode light notifications. So there is less distraction when you are playing.
- Smoother animations when transitioning the display between on and off.
- More refined Camera app interface.
- Privacy and safety
- Get an alert when an app accesses your clipboard. Cleared history after a period of time to prevent unwanted access.
- Added Personal Safety app.
- Better privacy protection including Photo Picker, nearby Wi-Fi devices permission, and select media permission.
- System performance
- Fingerprint unlock accuracy has improved by up to 12%.
- App startup speed has increased by up to 71%.
- Standby power consumption has improved by up to 50%.
- Implemented a new self-repair feature to periodically delete unused system dumps and cache.
- Increased system stability.
- General bug fixes.
Nothing OS 1.5.3 features the following changes:
- What’s New
- New support for manually adding games to Game Mode (games not installed from Play Store will not be able to be used with the Game Dashboard).
- Smoother animations for pop-up view.
- Improved fingerprint transition between the lock screen and AOD.
- New wallpapers.
- Added support for Ear (2).
- New memory management algorithm that reduces app restart times by over 35% and lowers CPU consumption to improve overall battery life. Improved system stability.
- Bug fixes:
- Fixed abnormal appearance of Night Light mode in certain scenarios.
- Fixed the flashing charging prompt on the AOD interface.
- Fixed issue where Glyph lights did not show for incoming WhatsApp calls.
- Fixed freeze issues during YouTube video playback.
- Fixed issue where weather data did not show in the Quick Look widget.
- Other general bug fixes.
- Update size: 91.79 MB
Nothing OS 1.5.3.hotfix features the following changes:
- Fixed an issue causing notifications to not appear when Quick Settings is active.
- Fixed an issue preventing the NFC toggle to function as intended
What are the regional variants of Nothing OS ?
Nothing offers two distinct regional variants of Nothing OS.
- Intended for European countries is the "EEA" version, as it meets the requirements of the European Privacy Directive and the General Data Protection Regulation (GDPR).
- The other version, the so-called "Global Version" is intended for Asian and Australian devices.
Code:getprop ro.product.name
If Nothing OS <1.5
Code:getprop ro.product.system.name- These commands will return "SpacewarEEA" if the device is delivered with the European firmware.
- For International models, the result should be "Spacewar" only.
Don't forget to read this post which tries to gather your problems, but especially solutions brought by members
[HELP THREADING] Nothing Phone 1 Common Issues and Problems
Actually, you will find a solution for IMEI and EDL problems18- FILES FOR NOTHING OS - (stock-boot, etc. )
/!\ IT'S HIGHLY RECOMMANDED /!\
to always using fastboot "boot" command installation
instead directly "flash" a patched boot.img file to avoid any risk of brick
Code:.\fastboot boot Magisk_Patched_XXX.img
By the way if Magisk patched boot file is good, device will boot temporary with root and install Magisk, you must simply install/apply root on the boot definitively :
- Open Magisk > Install > Install Directly (Recommanded) > Reboot... Voila !
If the Magisk patched boot file don't boot, just do a hard reboot/shutdown by pressing ON/OFF button +5 seconds, device reboot directly with your stock boot without problems.
Stock Boot & Patched Boot for Nothing OS
Nothing OS 1.0.2
Stock_boot.img
Nothing OS 1.1.0
Global-Stock-boot.img | Magisk-Patched_Global_1.1.0_Boot.img
EEA_Stock-boot.img | Magisk_patched-EEA_1.1.0_Boot.img
Nothing OS 1.1.2
Global-Stock-boot.img | Magisk-Patched_Global_1.1.2_Boot.img
EEA-Stock-boot.img | Magisk-Patched_EEA_1.1.2_Boot.img
Nothing OS 1.1.3
Global-Stock-boot.img | Magisk-Patched_Global_1.1.3_Boot.img
EEA-Stock-boot.img | Magisk-Patched_EEA_1.1.3_Boot.img
Nothing OS 1.1.4
Global-Stock-boot.img | Magisk-Patched_Global_1.1.4_Boot.img
EEA-Stock-boot.img | Magisk-Patched_EEA_1.1.4_Boot.img
Nothing OS 1.1.5
Global-Stock-boot.img | Magisk-Patched_Global_1.1.5_Boot.img
EEA-Stock-boot.img | Magisk-Patched_EEA_1.1.5_Boot.img
Nothing OS 1.1.6
Global-Stock-boot.img | Magisk-Patched_Global_1.1.6_Boot.img
EEA-Stock-boot.img | Magisk-Patched_EEA_1.1.6_Boot.img
Nothing OS 1.1.7
Global-Stock-boot.img | Magisk-Patched_Global_1.1.7_Boot.img
EEA-Stock-boot.img | Magisk-Patched_EEA_1.1.7_Boot.img
Nothing OS 1.1.7.hotfix
EEA-Stock-boot.img | Magisk-Patched_EEA_1.1.7.fix_Boot.img
Nothing OS 1.1.8
Global-Stock-boot.img | Magisk-Patched_Global_1.1.8_Boot.img
EEA-Stock-boot.img | Magisk-Patched_EEA_1.1.8_Boot.img
- - - - - - - - - - - - - - - - - - - - - - -
Nothing OS 1.5 Beta
Global-Stock-boot.img | Magisk-Patched_Global_1.5_Beta_Boot.img
EEA-Stock-boot.img | Magisk-Patched_EEA_1.5_Beta_Boot.img
Nothing OS 1.5.1 Beta (*) from this Beta EEA & Global are unified
Stock-boot.img | Magisk-Patched_1.5.1_Beta_Boot.img
Nothing OS 1.5.1 Beta Hotfix (*) from this Beta EEA & Global are unified
Stock-boot.img | Magisk-Patched_1.5.1_Beta_Hotfix_Boot.img
- - - - - - - - - - - - - - - - - - - - - - -
Nothing OS 1.5.2 Stable (*) from this Stable Release EEA & Global are unified
Stock-boot.img | Magisk-Patched_1.5.2_Boot.img
Nothing OS 1.5.3 Stable
Stock-boot.img | Magisk-Patched_1.5.3_Boot.img
Nothing OS 1.5.3.hotfix Stable
Stock-boot.img | Magisk-Patched_1.5.3.hotfix_Boot.img
Special thanks to HofaTheRipper & AVB Delenda Est for shared their firmwares & boot files links !!7@Phon3nX
Reading through this thread (and other threads in this forum), I see a lot of users facing issues updating their devices, especially with root. Even I have faced issues with updating and I try different methods to fix it, but there is still no single method that works 100% of the time. Sometimes local update method works, sometimes sideloading with ADB, etc.
It would be great if you could create a guide for updating their devices with root, possibly with all the different methods and troubleshooting methods. I do not mean unlocking or rooting, but updating NP1 by keeping root access. Sure, there are a lot of individual posts on this topic spread across this forum, as threads and as comments in threads like these, but I think it would be better to have it in one of the reserved sections in the original guide thread.
Thank you and kudos for the great job you do here.6KERNEL FOR PHONE(1) - 17-07-2022
If you're a developer looking to create something around the Phone(1), here's something to get you started with the release of the Kernel and device tree.
Nothing Phone 1 : Kernel Source || Device Tree5Thanks for the tip! This did the trick, and I'm now happily re-rooted on 1.1.3 I was not even aware of the local system update wizard...
Yes :
1/ Flash Full ROM Update
2/ Reboot normally (no risk, no EDL/Brick possibility)
3/ Boot normally System/OS, no root
4/ Run Magisk > Patch new boot 1.1.3 (you can know extract/found boot.img) on this thread
5/ Take the Patched Magisk Boot
6/ Boot on Bootloader mode (Fastboot) > Flash Magisk Boot
I advise to always flash magisk on "safe" mode, i mean with the "boot command (not flash boot command):
Code:.\fastboot boot magisk_patched-2XXXX_XXXXX.img
7/ Device will boot on System/OS with Magisk/Root granted just this time, and if not boot, just restart, old boot is always installed, more safe.
If device boot normally with the patched Boot, just go on magisk > install > install directly (recommanded) > apply
and reboot, voila !
