NV ram error. Imei null

Search This thread

SubwayChamp

Senior Member
Aug 6, 2016
4,670
4
1,781
Okay, but why can't I use my sim like everyone else, I have my baseband working, I just wanna use my phone with sim card in peace now,
Update the baseband, at least, to RUI2.
Unless, like someone else said, in some countries, the use of network bands are, somewhat linked to every device, based on IMEI.
 

LegendTDD

Member
Dec 22, 2022
26
8
Realme C3
I have tried what you are suggesting, and it leads to no imei repair and baseband unknown as well, I tried my device specific backup,
Though it doesn't mean that it would not work for you, you can give it a try, these devices are unpredictable


By deleting nvram folder in twrp
Man I have tried to place the TWRP or PBRP on the recovery partition. Img in the sp flash tool and I continue in the recovery stock, explain me in detail how I do
 

magnumoZeus

Senior Member
Man I have tried to place the TWRP or PBRP on the recovery partition. Img in the sp flash tool and I continue in the recovery stock, explain me in detail how I do
Stop spamming the same message over and over again,

With RUI1 only twrp works well, and that only works with custom vbmeta img, falsh those in sp flash tool , here are the images.

Also remember that after flashing you have to hold down volume down(-) button and power button together to get into recovery mode, do this before booting for first time ,
After booting for first time twrp is replaced with stock recovery.
 

Attachments

  • twrp-3.5.2_10-1-RMX2001.img
    64 MB · Views: 2
  • vbmeta.img
    4 KB · Views: 2

magnumoZeus

Senior Member
Update the baseband, at least, to RUI2.
Unless, like someone else said, in some countries, the use of network bands are, somewhat linked to every device, based on IMEI.
I already tried each and every firmware out there, from RUI 1,2,3 to all custom roms, nothing works,(with working baseband)

That "someone" just might be me, I said that in earlier post,
But now I have a patched imei(magisk module), which should be enough to fool service provider, but it stills says sim one not allowed (on custom roms)
I can use my sim in RUI2 and RUI3 with vowifi only, and after turning off wifi sim networks also disappear,
I also posted a video of the issue in earlier post.
 

LegendTDD

Member
Dec 22, 2022
26
8
Realme C3
Stop spamming the same message over and over again,

With RUI1 only twrp works well, and that only works with custom vbmeta img, falsh those in sp flash tool , here are the images.

Also remember that after flashing you have to hold down volume down(-) button and power button together to get into recovery mode, do this before booting for first time ,
After booting for first time twrp is replaced with stock recovery.
Thank you man, I finally got into the TWRP.
 

LegendTDD

Member
Dec 22, 2022
26
8
Realme C3
Stop spamming the same message over and over again,

With RUI1 only twrp works well, and that only works with custom vbmeta img, falsh those in sp flash tool , here are the images.

Also remember that after flashing you have to hold down volume down(-) button and power button together to get into recovery mode, do this before booting for first time ,
After booting for first time twrp is replaced with stock recovery.
Sorry for spam, on my device it appeared as if I had not sent the message
 

SubwayChamp

Senior Member
Aug 6, 2016
4,670
4
1,781
I already tried each and every firmware out there, from RUI 1,2,3 to all custom roms, nothing works,(with working baseband)
There were some back-ups, including mine, that are posted, maybe this works for you, from what I know, almost or all members flashed those. I also delete the partitions previous to flash back on them, to be sure.
That "someone" just might be me, I said that in earlier post,
But now I have a patched imei(magisk module), which should be enough to fool service provider, but it stills says sim one not allowed (on custom roms)
I can use my sim in RUI2 and RUI3 with vowifi only, and after turning off wifi sim networks also disappear,
I also posted a video of the issue in earlier post.
No, that cosmetic measure never could fool the carrier provider.

ok i will try this method and update everyone,
sold the device ?? in that condition, how much did you get for it..
Yes, the buyer didn't care about, the device was perfect for calls and all the functions.

Okay, but why can't I use my sim like everyone else, I have my baseband working, I just wanna use my phone with sim card in peace now,
Delete NVdata, and reboot.
 

LegendTDD

Member
Dec 22, 2022
26
8
Realme C3
Thank you man :D, you made me the night with your help, I am 15 years old, if I had money I would send you money by paypal, the ROM stock of my phone I have never liked and I preferred the pixel UI of the rmx2020. Enserio man you are the best🌟🌟🌟
 
  • Like
Reactions: magnumoZeus

LegendTDD

Member
Dec 22, 2022
26
8
Realme C3
Thank you man :D, you made me the night with your help, I am 15 years old, if I had money I would send you money by paypal, the ROM stock of my phone I have never liked and I preferred the pixel UI of the rmx2020. Enserio man you are the best🌟🌟🌟
Stop spamming the same message over and over again,

With RUI1 only twrp works well, and that only works with custom vbmeta img, falsh those in sp flash tool , here are the images.

Also remember that after flashing you have to hold down volume down(-) button and power button together to get into recovery mode, do this before booting for first time ,
After booting for first time twrp is replaced with stock recovery.
Sorry, I couldn't tag you
 
  • Like
Reactions: magnumoZeus

magnumoZeus

Senior Member
There were some back-ups, including mine, that are posted, maybe this works for you, from what I know, almost or all members flashed those. I also delete the partitions previous to flash back on them, to be sure.

No, that cosmetic measure never could fool the carrier provider.


Yes, the buyer didn't care about, the device was perfect for calls and all the functions.


Delete NVdata, and reboot.
I found backup of rmx 2151 online, an @Mark Yngell Kate also uploaded his backup, I tried both, none worked,

Although I haven't found your backup anywhere,
 

SubwayChamp

Senior Member
Aug 6, 2016
4,670
4
1,781
Thanks for sharing,

I restored your cr droid backup using pbrp recovery on nasustra v5.4 (including nvram) successfully, but nothing changed,
Issue still persist..
Do you mean, the baseband is still working, but you can't place calls?

Can you share the baseband, and when the device refuses to make calls, screenshots on?

And do you know, from where region is the original firmware of your device?
 

magnumoZeus

Senior Member
Do you mean, the baseband is still working, but you can't place calls?
Yes the baseband is still working,and there are still no networks, I'll attach ss in the end
Can you share the baseband, and when the device refuses to make calls, screenshots on? Screenshot_20230209-212258_Settings.pngScreenshot_20230207-022356_Phone.png
The device doesn't refuses to make calls, it doesn't connect to network, matter of fact in RUI2 AND RUI3 after connecting wifi I can place calls using my sim, but after turning wifi off the networks are again lost ,
video recording of the issue in the end
And do you know, from where region is the original firmware of your device?
The device is manufactured in India, and I am using it in the same country.
 
Last edited:

kim11

Member
Feb 6, 2023
9
0
I flash nvram with spa & dongl but the same erreur. My phone unlocked bootlaoder and stucked in recovery, can i flash twrp or EngRom or any rom to bootup the phone (rom v13.0.1).
I test change imei with metamode and when i read info imei i found it correct but when i rebot it stuck again.
 

magnumoZeus

Senior Member
I flash nvram with spa & dongl but the same erreur. My phone unlocked bootlaoder and stucked in recovery, can i flash twrp or EngRom or any rom to bootup the phone (rom v13.0.1).
I test change imei with metamode and when i read info imei i found it correct but when i rebot it stuck again.
What do you mean by: spa& dongl, EngRom,

You can flash twrp or pbrp by mtkclient,
Then install any custom rom.
Next time add screenshots
 
  • Like
Reactions: kim11

kim11

Member
Feb 6, 2023
9
0
Spa »» smart phone flash tools
Donglbox »» KS Tools
EbgRom»» Engeniring Rom
Thank you
 
Last edited:

SubwayChamp

Senior Member
Aug 6, 2016
4,670
4
1,781
Spa »» smart phone flash tools
Donglbox »» KS Tools
EbgRom»» Engeniring Rom
Thank you
SPFT = SmartPhone Flash Tool.

Donglbox »» KS Tools (?)

ENG ROM = Engineering ROM

From what I know, there is not an ENG ROM available for this device, unless in the technician community, they share a dumped ROM, among them, but not for public.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 2
    SPFT = SmartPhone Flash Tool.

    Donglbox »» KS Tools (?)

    ENG ROM = Engineering ROM

    From what I know, there is not an ENG ROM available for this device, unless in the technician community, they share a dumped ROM, among them, but not for public.
    Exactly, that's what I thought
    1
    Hi everyone. My phone is null with IMEI after the format all and update. In order to rewrite the IMEI with SN tool. I need help from you guys. MD1-DB and AP-DB files for MTK6785 realme 7 rmx2151 files. can some1 help me to get this file. OR any alternative tool to write IMEI number? I have my original IMEI. Help me @xda developers..
    Many of us, are in the same boat, no way to recover as of now, it seems that newer MTK devices do inaccessible the partition where’s IMEI is placed. If someone knows some solution, can share here.

    If you had made a backup, you could restore it though, not totally sure if it can be re-written this way though.

    There are other files called data apart the ofp file that can't be flashed using SP Flash tool, these are -I guess- for calibration, and could allow recovering them.
    1
    To recover the baseband you should flash any RM6785 ROM, for IMEI, no luck with it.
    1
    finally found a database for mt6785 for SN tool. use Original IMEI.. i am not responsible for any activity. Do it with your own Risk. password= pacha123
    Thanks, but these files are available in the ROM for R7, SN Write tool needs DB and AP files, these files used to be found in other devices with MTK, anyway SN Write tool doesn't recognize properly the device, and the result is always "fail", it seems that this device needs something like a permissive kernel to pass, not completely sure though.
    1
    Mer, can you help me about mtk-client, i found CMD version in "Github" or exécutable version,witch version i get, and setup to instal TWRP and Thank you for your recent help.
    your welcome,
    you can follow this tutorial here :