[NX563J+NX595J][Project Treble][Android 8.X-9.X][GSI][A-only][1.5]

NFound · Sep 2, 2018

Hi friends :highfive:

Project Treble on Nubia Z17 Series

Requirements:
Installed TWRP 3.2.3-X

Installation:
1. Flashing the Project-Treble-NXxXxJ-XX
(when finished, the script will automatically reload you in the recovery)
2. Flash any GSI image from the profile topic
3. Reboot and enjoy!

Installation instructions: video instruction

Download

All successful flashing!

Thanks:
- Mokee team fo the base

aljoscha81 · Sep 2, 2018

NFound said:
Hi friends :highfive:

Project Treble on Nubia Z17S

Requirements:
Installed TWRP 3.2.3-X

Installation:
1. Flashing the Project-Treble-NX595-v1.0
(when finished, the script will automatically reload you in the recovery)
2. Flash any GSI image from the profile topic
Note: for Android 9.x we also add patches (if required) and in TWRP 3.2.3-3 go to Reboot and press Signer
3. Reboot and enjoy!

Note2: DT2W, autobrightness, power profile and other already included!
Android 8.x bugs: not found at this time
Bugs Android 9.x: does not work NFC (in the process of elimination)

Download

All successful firmware!

PS I'm used Havoc OS GSI, all work

Thanks:
- Mokee team fo the base

Is that a vendor image for z17s ?
It makes me wonder cause it is round about 185mb my mokee vendor (403mb installed) is not able to got nfc function too on most gsis i searched and searched but no luck and auto brightness also not work i see some workaround but that not worked for me it says read only vendor partition but can that be solved with your new recovery and the install procedure you wrote by pressing signer also for nx563j? That would be fine

Wait i test by myself ....

NFound · Sep 3, 2018

In OP added video instruction: https://www.youtube.com/watch?v=eOk_IVl4E0s

Topogigi · Sep 3, 2018

aljoscha81 said:
Is that a vendor image for z17s ?
It makes me wonder cause it is round about 185mb my mokee vendor (403mb installed) is not able to got nfc function too on most gsis i searched and searched but no luck and auto brightness also not work i see some workaround but that not worked for me it says read only vendor partition but can that be solved with your new recovery and the install procedure you wrote by pressing signer also for nx563j? That would be fine
Wait i test by myself ....

For nx563j: Auto brightness works with these instructions:

https://forum.xda-developers.com/pr.../overlay-enable-night-light-adaptive-t3741965

Remember to remount /vendor in RW mode before applying the terminal command with:

mount -o remount,rw /vendor

aljoscha81 · Sep 3, 2018

Topogigi said:
For nx563j: Auto brightness works with these instructions:

https://forum.xda-developers.com/pr.../overlay-enable-night-light-adaptive-t3741965

Remember to remount /vendor in RW mode before applying the terminal command with:

mount -o remount,rw /vendor

I lost led light for buttons on my device by the mod is there a way to activate again?

arceoxis · Sep 3, 2018

aljoscha81 said:
I lost led light for buttons on my device by the mod is there a way to activate again?

Was it working before? I flashed Mokee first and after that, full wipe and I flashed GSI, but the led buttons never worked

devast8ndiscodave · Sep 4, 2018

MTP not working. I think it's a common pie issue.

NFound · Sep 4, 2018

In OP added .zip for NX563J

sippi90 · Sep 4, 2018

Fingerprint on GSI Roms

For NX563J is fingerprint working on any GSI Rom?

Topogigi · Sep 4, 2018

aljoscha81 said:
I lost led light for buttons on my device by the mod is there a way to activate again?

I have my leds working. I flashed this overlay:

https://forum.xda-developers.com/showpost.php?p=75630470&postcount=38

Ambient Display is not working, but leds are there.

I will try the new Project Treble Vendor Image for nx563j in OP and report in a while.

---------- Post added at 06:28 PM ---------- Previous post was at 06:26 PM ----------

sippi90 said:
For NX563J is fingerprint working on any GSI Rom?

AFAIK, yes

---------- Post added at 07:00 PM ---------- Previous post was at 06:28 PM ----------

Ok, I gave new NX563J Treble image a try.

Pros:
DT2W works out of the box
Auto brightness works out of the box (was working with patch with mokee vendor/boot images)
Cons:
Camera not working (was working well with mokee vendor/boot images)
Face Unlock not working (it wasn't working with mokee vendor/boot images too)
WIFI Hotspot not working (it wasn't working with mokee vendor/boot images too)
MTP for file transfer not working (it wasn't working with mokee vendor/boot images too)
Battery Stats for applications not working (it wasn't working with mokee vendor/boot images too)

For me, Camera is a deal breaker: back to Mokee vendor/boot images for the moment....

One more note: Installing the zip file causes the Recovery to reboot. Had to extract and flash vendor and boot images manually and flash them individually....

Gonzalo.90 · Sep 4, 2018

Hi, I'm using an NX563J and I have a problem.

I did everything you said:
1- Installed TWRP 3.2.3-3
2- Flash the Project-Treble-NX563J-v1.0
3- Flash HavocP-arm64_aonly_vanilla_nosu-0830
After that I reboot and the it get stucked when it sais "android", and never start.

Did I make a mistake? What can I do now?
Regards!

NFound · Sep 4, 2018

Gonzalo.90 said:
Hi, I'm using an NX563J and I have a problem.

I did everything you said:
1- Installed TWRP 3.2.3-3
2- Flash the Project-Treble-NX563J-v1.0
3- Flash HavocP-arm64_aonly_vanilla_nosu-0830
After that I reboot and the it get stucked when it sais "android", and never start.

Did I make a mistake? What can I do now?
Regards!

Hi. For Havoc P need install the 1, 2, 3 patches
I'm recomended is now install Havoc Oreo (link in OP)

Gonzalo.90 · Sep 4, 2018

NFound said:
Hi. For Havoc P need install the 1, 2, 3 patches
I'm recomended is now install Havoc Oreo (link in OP)

Thanks for the response, but I' dont know much about this, im sorry but in the link you send there are 5 files:
P-PR1-sGSI-AB.zip
P-PR1-sGSI-Aonly.zip
POST-sGSI_1_v0.14.zip
POST-sGSI_2_v0.17.zip
POST-sGSI_3_v0.5.zip
Wich ones do I need to intall?
And could you send me the link to get Havoc Oreo please, i can´t find it

ronvanv · Sep 4, 2018

Gonzalo.90 said:
Thanks for the response, but I' dont know much about this, im sorry but in the link you send there are 5 files:
P-PR1-sGSI-AB.zip
P-PR1-sGSI-Aonly.zip
POST-sGSI_1_v0.14.zip
POST-sGSI_2_v0.17.zip
POST-sGSI_3_v0.5.zip
Wich ones do I need to intall?
And could you send me the link to get Havoc Oreo please, i can´t find it

The link for the oreo file: https://sourceforge.net/projects/havoc-os/files/arm64aonly/
Download this file: Havoc-arm64_aonly_vanilla_nosu-0819.zip (so without the P after Havoc). This is the oreo file.

Gonzalo.90 · Sep 4, 2018

ronvanv said:
The link for the oreo file: https://sourceforge.net/projects/havoc-os/files/arm64aonly/
Download this file: Havoc-arm64_aonly_vanilla_nosu-0819.zip (so without the P after Havoc). This is the oreo file.

Thank you very much, I'm downloading and then I'll flash it. I'll let you know how it comes.

arceoxis · Sep 4, 2018

Topogigi said:
I have my leds working. I flashed this overlay:

https://forum.xda-developers.com/showpost.php?p=75630470&postcount=38

Ambient Display is not working, but leds are there.

I will try the new Project Treble Vendor Image for nx563j in OP and report in a while.

---------- Post added at 06:28 PM ---------- Previous post was at 06:26 PM ----------

AFAIK, yes

---------- Post added at 07:00 PM ---------- Previous post was at 06:28 PM ----------

Ok, I gave new NX563J Treble image a try.

Pros:
DT2W works out of the box
Auto brightness works out of the box (was working with patch with mokee vendor/boot images)
Cons:
Camera not working (was working well with mokee vendor/boot images)
Face Unlock not working (it wasn't working with mokee vendor/boot images too)
WIFI Hotspot not working (it wasn't working with mokee vendor/boot images too)
MTP for file transfer not working (it wasn't working with mokee vendor/boot images too)
Battery Stats for applications not working (it wasn't working with mokee vendor/boot images too)

For me, Camera is a deal breaker: back to Mokee vendor/boot images for the moment....

One more note: Installing the zip file causes the Recovery to reboot. Had to extract and flash vendor and boot images manually and flash them individually....

LOL, ambient display is working for me but buttons light isn't working. I tried the app, but nothing...
I could flash the .zip from this post without any problems, are you using his recovery?

Enviado desde mi Phh-Treble with GApps mediante Tapatalk

Topogigi · Sep 5, 2018

I installed the Resurrection Remix 6.1 GSI yesterday (with the combination of vendor/boot images in this thread) and I did not find any major bugs with it. All is in working conditions (including IR sensor, that is functional only if selinux is turned into permissive mode)
I'm a happy camper for now, waiting for Android 9.0 to be more stable and complete.

sippi90 · Sep 5, 2018

Topogigi said:
I installed the Resurrection Remix 6.1 GSI yesterday (with the combination of vendor/boot images in this thread) and I did not find any major bugs with it. All is in working conditions (including IR sensor, that is functional only if selinux is turned into permissive mode)
I'm a happy camper for now, waiting for Android 9.0 to be more stable and complete.

Are the Button LEDs & Ring LED also working? If yes which Firmware are you on?

HansWorst7 · Sep 6, 2018

Is there any open gapps for Android 9?

vincemajosa · Sep 6, 2018

HansWorst7 said:
Is there any open gapps for Android 9?

You can find it here: https://www.theandroidsoul.com/android-9-pie-gapps/

[NX563J+NX595J][Project Treble][Android 8.X-9.X][GSI][A-only][1.5]

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Member

Senior Member

Member

Senior Member

Member

Senior Member

Member

Senior Member

Senior Member

Member

Senior Member

Member

Similar threads

Top Liked Posts