Odin always FAILs on System.img

[LBTT]

Hi there! I'm new in this kind of thing, but i hope you can help me...

I have a Samsung Galaxy SIII mini GT-i8190 and days ago it started to freeze at first it froze launching some random application and then even about 20 seconds after the boot, so I tried to fix it in many ways:
1- I tried to go in Settings > Backup and Reset really fast but when I was there it froze... FAIL
2- I tried to go on Recovery Mode with the buttons combo Volume up + Home + Power, after tryin' several times I finnaly got it and I set the Wipe Data/ Factory reset, it ran for about 2 hours without any sign of progress, probably it erase some data cause after than Recovery Mode is dead... FAIL
3- I downloaded Odin v.3.07 , v.3.10.6 and all the unbranded firmware on Sammobile for my country (Italy), since my Galaxy it's unbranded and I bought it in a local store, though it's made in Korea, I don't know if it's an useful information, however I tried to flash every rom with two different version of Odin (v.3.07; v3.10.6), three different usb cable (Samsung APCBU10BBE ; NGM brand cable; and another one I don't know the specifications) , two different laptop (Win7 Pro x64 ; Win10 Pro x64)...
At first Odin gave me a PIT error that I solve flashing a PIT, it alway recognise the device with the "Added" notification but the laptops recognise it as "Modem" in Devices and Printers though when I put in the usb cable there's the "audio notification" and the Usb Samsung Drivers are installed, sometimes when i tried to add a device in "Devices and Printers" it shows an "android "something but it always doesn't install it ...
I also tried to install a custom recovery, it flash them but th combo Volume up + Home + Power doesn't work, I don't know why.
So now only the Download Mode works sometimes, the device always says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.", I tried Kies but it were on a "connecting device" forever ( then I removed it), Odin always FAIL when it comes to a 30% circa on flashing System.img, when on the device shows a kind of "movi_write card_status: 0 (200) start_blk: XXXXXX" ...

Here an example tryin flashing an UK rom:

<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I8190XXAMG4_I8190XEFAMH1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> modem.bin
<ID:0/004> recovery.img
<ID:0/004> STE_boot1.img
<ID:0/004> STE_boot2.img
<ID:0/004> system.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/006> Added!!


I obviously looked for a solution on the net before asking for help here but I didn't find the "specific" answer to my problem, I hope we can find it :good:
Have a nice day!

 

[LBTT]

movi_write card status:0

No one has a clue on what it means "movi_write card status:0"? It appears after a while flashing ROMs, especially when it comes to "system.img".
I googled it but I didn't find so much, I find something on the "movi_write card status:2" but I don't think itìs the same thing...

Thanks anyway...

 

[fc_themaster]

Have you fixed it? I have the same problem

 

[devea123]

I also have the same problem.

It all started when my phone got very hot and cannot turn on the screen. Then i tried to hard reset by removing the battery, and it cannot boot, stuck on the logo:

When connected to a charger, it does not display the charging battery screen:

I tried to flash with many Odin versions, 3 different cables, many usb ports, 2 computers and 1 notebook. But it all failed.

Screen when flash fail:

I'm from Indonesia, so this is the firmwares I have tried, all failed in system.img:
GT-I8190_XSE_1_20140110093200_2tamrjuav1
I8190DXAMA2_I8190OLBAMA2_XSE
Samsung-Updates.com-GT-I8190-XSE-I8190DXALL3-1355239405

I also tried using Kies few times. But the progress always stopped in the middle with no error what so ever. Then after few hours, the phone restart itself, but the Kies is still in progress. The phone shows this screen:

Note: when using Odin, I already kill the Kies process from Task Manager.

Anyone please help. I'm really desperate.

Thanks in advance.

 

[tys0n]

I would have flashed twrp and then try to repair /system partition. I do think its a hardware issue but maybe worth a try.

Skickat från min SM-A310F

 

[devea123]

I would have flashed twrp and then try to repair /system partition. I do think its a hardware issue but maybe worth a try.

Skickat från min SM-A310F

Thanks for your answer.

I've followed this tutorial techbeasts.com/install-twrp-28-recovery-on-samsung-galaxy-s3-mini-i8190-n-l/. The flash is PASS!. But I can't access the TWRP 2.8 Recovery, it just shows the samsung screen for a second then blank black screen (like the screen is turned off).

I've also tried twrp-2.6.3.0-golden.tar from dl.twrp.me/golden/, but I got the same result.

 

[garpedos]

Hi there! I'm new in this kind of thing, but i hope you can help me...

I have a Samsung Galaxy SIII mini GT-i8190 and days ago it started to freeze at first it froze launching some random application and then even about 20 seconds after the boot, so I tried to fix it in many ways:
1- I tried to go in Settings > Backup and Reset really fast but when I was there it froze... FAIL
2- I tried to go on Recovery Mode with the buttons combo Volume up + Home + Power, after tryin' several times I finnaly got it and I set the Wipe Data/ Factory reset, it ran for about 2 hours without any sign of progress, probably it erase some data cause after than Recovery Mode is dead... FAIL
3- I downloaded Odin v.3.07 , v.3.10.6 and all the unbranded firmware on Sammobile for my country (Italy), since my Galaxy it's unbranded and I bought it in a local store, though it's made in Korea, I don't know if it's an useful information, however I tried to flash every rom with two different version of Odin (v.3.07; v3.10.6), three different usb cable (Samsung APCBU10BBE ; NGM brand cable; and another one I don't know the specifications) , two different laptop (Win7 Pro x64 ; Win10 Pro x64)...
At first Odin gave me a PIT error that I solve flashing a PIT, it alway recognise the device with the "Added" notification but the laptops recognise it as "Modem" in Devices and Printers though when I put in the usb cable there's the "audio notification" and the Usb Samsung Drivers are installed, sometimes when i tried to add a device in "Devices and Printers" it shows an "android "something but it always doesn't install it ...
I also tried to install a custom recovery, it flash them but th combo Volume up + Home + Power doesn't work, I don't know why.
So now only the Download Mode works sometimes, the device always says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.", I tried Kies but it were on a "connecting device" forever ( then I removed it), Odin always FAIL when it comes to a 30% circa on flashing System.img, when on the device shows a kind of "movi_write card_status: 0 (200) start_blk: XXXXXX" ...

Here an example tryin flashing an UK rom:

<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I8190XXAMG4_I8190XEFAMH1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> modem.bin
<ID:0/004> recovery.img
<ID:0/004> STE_boot1.img
<ID:0/004> STE_boot2.img
<ID:0/004> system.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/006> Added!!


I obviously looked for a solution on the net before asking for help here but I didn't find the "specific" answer to my problem, I hope we can find it :good:
Have a nice day!

Try other ROM, if you're in Indonesian try La'Fleur version. I think that was interrupted file on that ROM

 

[Amandio12]

Samsung Galaxy Note 3 N900

<OSM> N900XXUEBOL4_N900OJKEBOL2_N900XXUEBOL1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/034> Added!!
<ID:0/034> Odin engine v(ID:3.1005)..
<ID:0/034> File analysis..
<ID:0/034> SetupConnection..
<ID:0/034> Initialzation..
<ID:0/034> Get PIT for mapping..
<ID:0/034> Firmware update start..
<ID:0/034> SingleDownload.
<ID:0/034> sboot.bin
<ID:0/034> NAND Write Start!!
<ID:0/034> boot.img
<ID:0/034> recovery.img
<ID:0/034> system.img
<ID:0/034> FAIL!
<ID:0/034>
<ID:0/034> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/034> Removed!!