[ODIN] Official stock firmware / U firmware [SM-G935V]

[deltacharlie]

I followed this but my s7 still says custom on boot.

Same issue i faced. to resolve it after flashing the firmware u have to go to recovery mode and do a data/factory reset. Then the custom logo goes away

 

[Lrajkh]

Anyone can help me? I am staying in India. I have imported S7 edge SM-G935v. It is now with android 7.0 naught. But it has Verizon bloatware, Verizon apps, Verizon boot up logo. It shows some card not from Verizon when I use local GSM sim card in india. Calls, messages work fine. Data is not working.
How to use firmware which is open to any GSM card and without Verizon bloatware?
If I flash g935u firmware, Will it be free from all Verizon bloatware? PLEASE HELP.

 

[phantoni1993]

Anyone can help me? I am staying in India. I have imported S7 edge SM-G935v. It is now with android 7.0 naught. But it has Verizon bloatware, Verizon apps, Verizon boot up logo. It shows some card not from Verizon when I use local GSM sim card in india. Calls, messages work fine. Data is not working.
How to use firmware which is open to any GSM card and without Verizon bloatware?
If I flash g935u firmware, Will it be free from all Verizon bloatware? PLEASE HELP.

I also live in India I'm using the last Verizon firmware and I don't have any issue with my JIO simcard.
Have you tried to configure the APN?
To remove Verizon bloatware and apps you can use "Package Disabler Pro".

 

[Lrajkh]

I also live in India I'm using the last Verizon firmware and I don't have any issue with my JIO simcard.
Have you tried to configure the APN?
To remove Verizon bloatware and apps you can use "Package Disabler Pro".

Can you please share jio apn settings? I will try it.

 

[Tattoo_Paul]

Back To MM

Should be able to

You Can Flash Back to Marshmallow, but you will have to download the PIT file for your phone. Click on the PIT tab in Odin (READ the warning and decide whether or not to proceed) then go back to first tab of Odin and put all 4 files from your MM build there and hit start. Without the PIT file you will ONLY get one of 2 results Odin error message, or a boot loop (Both of which can be fixed with the PIT file).

 

[EazyVG]

I am on S7 flat (not edge) and have flashed the latest Updates version - no bloatware, no Verizon stuff, much lighter and works well. Staying in Russia and the SIM auto configured with proper operator settings.

Not I need a proper root ... Links to guide?

 

[bunnycool]

I also live in India I'm using the last Verizon firmware and I don't have any issue with my JIO simcard.
Have you tried to configure the APN?
To remove Verizon bloatware and apps you can use "Package Disabler Pro".

Flash "U" firmware,i am using that only. i also have a s7 verizon unlocked.using in Delhi.
no BLOATWARE

 

[drt054]

I flashed the Verizon QC5 firmware, rooted, and now my fingerprint sensor isn't working.. anyone else?

 

[nygrik]

anyone have a pit file? for stock vzw? either nougat build

 

[Tattoo_Paul]

Do not root

Well, since support on the other thread stopped I figured i would start this one up with the release of Nougat.

1: Download the file and extract contents.
1A: Make sure you have the drivers properly installed!
2: Place the BL file in the BL slot, AP file in the AP slot, CP in the CP slot, and CSC in the CSC slot and wait for it to verify the files.
3:Turn off phone and reboot into download mode (volume down, home and power button) then plug into computer.
4:Click start and wait for it to finish.

After this you should be on the latest release.

Red= Verizon
Blue= U firmware

Verizon Firmware:
G935VVRU4BQA2_G935VVZW4BQA2
MD5: ab3437fcc1a8931a6e9a7c683064c7d2

G935VVRU4BQA4_G935VVZW4BQA4
MD5: a22c0ed08487582fc9d3e3767d5c3976

NEW >>> G935VVRU4BQC5_G935VVZW4BQC5 <<< NEW
MD5: 127a778b2cf2c291b86b968730a2787e

U Firmware:
G935UUES4AQC1_G935UOYM4AQC1
*This is not "N" Firmware.*
MD5: 8aeb1e3be66f18f8b1947521a0e4da70

------N Firmware from here down------

NEW >>> G935UUEU4BQD2_G935UOYM4BQD2 <<< NEW
MD5:1c8ab9e9e1839a46c6521b150d6aaf50


Thread with tools, drivers, and other stock firmware is here.

For those who are having issues with Odin use this version. It is the PrinceComsy version.

Rooting creates a crash loop. Phone boots after odin flashing first root file, but crashes before you can get to flashfire to finish rooting. Same Over and over again. It will take some more versed on Samsung than me to fix this. Stock Verizon Nougat will root fine if it helps (even maintains fingerprint scanner after root which is a problem with U Nougat Roms.)

---------- Post added at 11:58 PM ---------- Previous post was at 11:56 PM ----------

Well, since support on the other thread stopped I figured i would start this one up with the release of Nougat.

1: Download the file and extract contents.
1A: Make sure you have the drivers properly installed!
2: Place the BL file in the BL slot, AP file in the AP slot, CP in the CP slot, and CSC in the CSC slot and wait for it to verify the files.
3:Turn off phone and reboot into download mode (volume down, home and power button) then plug into computer.
4:Click start and wait for it to finish.

After this you should be on the latest release.

Red= Verizon
Blue= U firmware

Verizon Firmware:
G935VVRU4BQA2_G935VVZW4BQA2
MD5: ab3437fcc1a8931a6e9a7c683064c7d2

G935VVRU4BQA4_G935VVZW4BQA4
MD5: a22c0ed08487582fc9d3e3767d5c3976

NEW >>> G935VVRU4BQC5_G935VVZW4BQC5 <<< NEW
MD5: 127a778b2cf2c291b86b968730a2787e

U Firmware:
G935UUES4AQC1_G935UOYM4AQC1
*This is not "N" Firmware.*
MD5: 8aeb1e3be66f18f8b1947521a0e4da70

------N Firmware from here down------

NEW >>> G935UUEU4BQD2_G935UOYM4BQD2 <<< NEW
MD5:1c8ab9e9e1839a46c6521b150d6aaf50


Thread with tools, drivers, and other stock firmware is here.

For those who are having issues with Odin use this version. It is the PrinceComsy version.

Rooting creates a crash loop. Phone boots after odin flashing first root file, but crashes before you can get to flashfire to finish rooting. Same Over and over again. It will take some one more versed on Samsung than me to fix this. Stock Verizon Nougat will root fine if it helps (even maintains fingerprint scanner after root which is a problem with U Nougat Roms.)

 

[MANLEY7878]

Does this work on the Sprint S7 Edge?

 

[gadget069]

My wife's s7 took the nougat update and now a bunch of the Samsung apps aren't working.

 

[Raku Raku]

I have a new Verizon S7 Edge that I want to install the U rom on. Phone drivers and Odin3-v3.11.1. are installed on my laptop, just need to download the U rom. What version would you recommend?

 

[raduque]

To be sure, BQC5 is the latest Verizon 7.0 firmware, correct? I need to flash to stock for warranty. My S7e has the pink line defect =/

 

[ely.soto]

There is a QC9 update as well.

 

[Raku Raku]

Is NEW >>> G935UUEU4BQD2_G935UOYM4BQD2 <<< NEW on page one the latest Nougat firmware? Thanks!

 

[bunnycool]

Is NEW >>> G935UUEU4BQD2_G935UOYM4BQD2 <<< NEW on page one the latest Nougat firmware? Thanks!

yes,latest

 

[imanueljr]

my lte wont work?

i wanna ask something
i just upgrade my phone from 6.0 to 7.0, its perfectly work. until i realised that my phone nomore 4g lte. it became hspa+
i upgrade it using odin G935VVRU4BQA2_G935VVZW4BQA2
well, please someone help

 

[SEVENEDGE]

Do you have what Brand phone or Carrier? Did you flash from the Sammobile firmware files?

 

[imanueljr]

Do you have what Brand phone or Carrier? Did you flash from the Sammobile firmware files?

Do you have what Brand phone or Carrier? Did you flash from the Sammobile firmware files?

its verizon and bcoz im from indonesia, im using telkomsel carrier
im just following from droidviews blog

can u help me for solving this?
and i already switch to 935u firmware nougat but still my lte wont working