Development [OFFICIAL][12.0] PROJECT ELIXIR for Redmi Note 10 Pro [Sweet & SweetIN] [ROM][AOSP]

[Laptapper]

v1.4 is out if anyone is following! Does anyone know if this is using the latest Vantom Kernel (v197)? There's no mention in the change log but there's been a separate update to Vantom between Elixir 1.3 and 1.4.

Elixir uses 263 in V1.4

Newest is 266 and I'll try soon...

 

[Laptapper]

v1.4 is out if anyone is following! Does anyone know if this is using the latest Vantom Kernel (v197)? There's no mention in the change log but there's been a separate update to Vantom between Elixir 1.3 and 1.4.

Now I'm on 266

Recommend to delete lock pin and fingerprints before flashing (I've had to remove the locksettings in ofox in case of not working pin....)

Now all is fine but of course in 1 minute using time I can say nothing about pros cons...

Here you'll find the newest:
Thread '[SHARED] [OSS] [MIUI] newest sweet/in Vantom kernel' https://forum.xda-developers.com/t/shared-oss-miui-newest-sweet-in-vantom-kernel.4398423/

 

[fxthomas]

Now I'm on 266
View attachment 5539857

Recommend to delete lock pin and fingerprints before flashing (I've had to remove the locksettings in ofox in case of not working pin....)

Now all is fine but of course in 1 minute using time I can say nothing about pros cons...

Here you'll find the newest:
Thread '[SHARED] [OSS] [MIUI] newest sweet/in Vantom kernel' https://forum.xda-developers.com/t/shared-oss-miui-newest-sweet-in-vantom-kernel.4398423/

Do let us know , the results based on your experience.

 

[Laptapper]

Do let us know , the results based on your experience.

Until now it's looking great!
It is smoother then ever before (elixir), absolutely no lags in gestures.....
Gsam Battery didn't shows such a good values before in all A12 I've tested but this will be exactly known in some cycles:

 

[andrestupapa]

I would like to try it but before doing so I would like to know if this build has the ANX camera installed by default or not? Greetings.

 

[Laptapper]

I would like to try it but before doing so I would like to know if this build has the ANX camera installed by default or not? Greetings.

No anx
But you can install it yourself.
I don't like anx, for me gcam is better.

 

[Yanty Ardy]

The displayed charging details aren't reliable. I've seen it reported as "Charging Slowly" and it's gone from 50% to 100% in around 30mins. To really measure it, you're better off getting a little USB tester. I've just run it with Elixir v1.3 using both the official charger and a generic QC 3.0 charger.

EDIT: Just in case there are any photo super-sleuths checking this... I quickly (and manually) focus-stacked the images without much attention to detail or cleaning up. It serves the purpose.

Thanks a lot for the information. Do you also have the measurement of official charger with MIUI os?

 

[fl4shb1c]

Thanks a lot for the information. Do you also have the measurement of official charger with MIUI os?

Oooh interesting... didn't think of doing that. Will flash back to factory tomorrow and report the findings.

 

[Laptapper]

* Your warranty is now void.
* We are not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels.
* You do it at your own risk and take the responsibility upon yourself and you are not to blame us or XDA and its respected developers.

"This is a user-friendly thread, all your suggestions, and proper bug reports are important to us but don't be disrespectful to anyone here. Your suggestions and proper bug reports will be taken into consideration.."


Project Elixir is another aftermarket AOSP ROM which basically offers minimal UI enhancement & close to Stock Android ROM with great performance, security and stability. Most of the OEMs' these days will provide slow and untimely updates, but we don't do that here. We closely follow Google to bring the latest updates to our users, and even prolong support for devices that have been declared obsolete by OEMs. Our ROMs' source code is open-source, secure, stable, and outstanding. Your experience while using Project Elixir will be butter smooth without compromising the quality of the Android experience. In short, it's perfectly balanced between Great Performance, Security, stability, minimal UI & awesome features including pixel goodies So do not hesitate anymore, join us now and start enjoying the beauty of stock Android. Download and enjoy Project Elixir on your respective devices!

- Saurav - Founder & lead Developer
- Prabh - Developer
- Sarthak - Developer
- Abhishek - Developer & Support Team

- And Also Our Hardworking Maintainers

NOTE: As we keep updating source so its hard to keep threads updated everytime everywhere so kindly visit our elegram group for latest changes and screenshots.

// Features of Initial Android 12 Build and will be updated on every release //

STATUSBAR
- 4G Icon Instead of LTE.
- Added battery icon customisation
- Added statusbar clock & date customisation
- VoLTE icon toggle.
- Volte and Vowifi icon picker

Navigation Bar
- System navigation

QUICK SETTINGS
- Vibrate on touch.

GESTURES
- Double tap to sleep on statusbar
- Double tap to sleep on lockscreen
- Extended swipe gesture.
- Quick open camera.
- One handed mode.
- Power button press and hold gesture.
- Power button torch gesture.
- Screen off power button torch.
- Three finger swipe screenshot.

BUTTONS
- Skip music tracks.
- Volume rocker wake.

NOTIFICATIONS
- Incall Vibrations.
- Add switch for linked ring and media notification volumes
- Allow to suppress notifications sound/vibration if screen is ON
- Added Lockscreen Charging info
- Add option to enable AOD on charging only

POWER MENU
- Advanced Reboot.
- Power menu items.

SEURITY
- Add option to scramble pin layout when unlocking
- Introduce pocket lock mode

MISC
- Pure Pixel Goodies
- Monet Theme (Wallpaper based accent)
- Themed Icons
- Add capability to allow tethering to use VPN
- Enabled charging ripple effect
- Bluetooth battery level when available
- Allow user to add/remove QS with one click

Lots more to coming soon !
Stay Tuned!!

---------- SourceForge ! ----------

NOTE: Please keep in mind that these are Gapps Builds and there is no vanilla build of this rom available.

NOTE: It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup (or with any backup/restore app) as this can cause stability issues that are very hard to debug, restoring regular apps is fine. If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.


CLEAN FLASH (Moving From A11 to A12)

- Download the latest build
- Take a backup for safe side
- Boot to Recovery
- Format Data by typing yes
- Flash the latest build
- Reboot


What works?

Wifi | RIL | Mobile data | GPS | Camera
Flashlight | Camcorder | Bluetooth | Fingerprint reader | Lights | Sound | vibration
Almost everything

What doesn't work? or Any Bug ?

You tell me!

BUG REPORT !!

As soon as the problem occurs, take a logcat and please inform us via Telegram or XDA.
for more READ THIS

- Android Open-Source Project
- Pixel Experience
- LineageOS
- Proton AOSP
- Arrow OS


- Others, I may have forgot to mention

- Android OS version: 12.0
- Security patch: December 2021
- Build author/Device Maintainer : itsXRP
- DEVICE: Redmi Note 10 Pro Series
- DEVICE CODENAME: Sweet

---------- Sources and Documentation ----------

- ROM Source Code
- Kernel Source
- OFFICIAL DEVICES

---------- Join Telegram Group & Channel ----------

-- DEVICE UPDATE TELEGRAM CHANNEL --
-- SUPPORT/DISCUSSION TELEGRAM GROUP --

As you know build is free but building ROM needs a server. And Maintaining source and device stuff needs a server and it's pretty expensive for a student. It will be really helpful and appreciated if you donate or contribute to us. Also if you have any queries related to donation you can freely message -> Saurav (Founder & lead Dev)

PAYTM UPI ID : dwarmachine24@paytm
GPAY UPI ID: dwarmachine24@oksbi
PAYPAL: https://www.paypal.me/uglykid24

​

As I mentioned before:
V1.4 takes around 1hour to charge from 49% to 90%
Attached the log as zip
How to get it faster?

 

[fl4shb1c]

As I mentioned before:
V1.4 takes around 1hour to charge from 49% to 90%
Attached the log as zip
How to get it faster?

Based on info from here:
gsmarena.com/xiaomi redmi_note_10_pro_(max)-review-2232p3.php
dxomark.com/xiaomi-redmi-note-10-pro-battery-review-holding-its-own
...that sounds about right. It looks like there is a dramatic slowdown after around 50% (where I was thinking it was closer to 80%) making my earlier tests invalid.

I'm gonna run some tests tomorrow with the following conditions:

1. No network connection or account sign in... just fresh flashed images
2. Initial charge level between 20-40%
3. Allow charge for 1min before measuring
4. Final test will be monitoring charge rate to see when it drops (official charger only)

I'll test both factory and Elixir 1.4 roms along with the official charger and 3rd party QC 3.0 charger. I'll also throw in my 100watt gallium nitride PD charger for fun.

Let me know if there are any other considerations to include.

 

[fl4shb1c]

Testing complete between MIUI_12.5.9_Global and Elixir 1.4. I added the pics as attachments to avoid creating a gigantic post with inline pics.

Summary:

• Official charger
  • MIUI = 12.6 watts
  • Elixir = 13.2 watts
• QC 3.0 charger
  • MIUI = 16.8 watts
  • Elixir = 16.4 watts
• GaN 100 watt PD charger
  • MIUI = 13.1 watts
  • Elixir = 11.2 watts

Some observations:

• I couldn't measure any "claimed" 33 watt fast charging, but looking at the official charger details (see pic) the max output is only 18 watts anyway (9V-2A or 12V-1.5A). Maybe the charger is territory specific?
• With the official charger, MIUI reports "Fast charging" while Elixir reports "Charging slowly". In reality though, they are both drawing near enough the same 13 watts.
• With the QC 3.0 charger, it actually hit the "Charging rapidly" and "Turbo charging" on both MIUI and Elixir drawing 16-17 watts which was faster than the official charger. This isn't really surprising given that it's a QC chipset and Xiaomi would have cut costs with the charger to keep the price down.
• The 100 watt GaN PD charger didn't have any improvements over the official charger and actually charged slower with the Elixir rom.

TL;DR Get yourself a QC 3.0 charger and you'll get the best charge speeds out of both roms!

EDIT: Updated observation about 33 watt fast charging.

 

[Laptapper]

Testing complete between MIUI_12.5.9_Global and Elixir 1.4. I added the pics as attachments to avoid creating a gigantic post with inline pics.

Summary:

• Official charger
  • MIUI = 12.6 watts
  • Elixir = 13.2 watts
• QC 3.0 charger
  • MIUI = 16.8 watts
  • Elixir = 16.4 watts
• GaN 100 watt PD charger
  • MIUI = 13.1 watts
  • Elixir = 11.2 watts

Some observations:

• With the official charger, MIUI reports "Fast charging" while Elixir reports "Charging slowly". In reality though, they are both drawing near enough the same 13 watts.
• With the QC 3.0 charger, it actually hit the "Charging rapidly" and "Turbo charging" on both MIUI and Elixir drawing 16-17 watts which was faster than the official charger. This isn't really surprising given that it's a QC chipset and Xiaomi would have cut costs with the charger to keep the price down.
• The 100 watt GaN PD charger didn't have any improvements over the official charger and actually charged slower with the Elixir rom.

TL;DR Get yourself a QC 3.0 charger and you'll get the best charge speeds out of both roms!

Looks good but for me (in the meantime I've made a completely clean flash) I didn't looked at watts.
I looked on time and for me the charging time is too slow, it takes more than 1 hour for charging 50 % up, regardless if starting with 20 or 50 %..... The same charger worked before on A10 A10 at least in double speed.
What could be the prob?

 

[fl4shb1c]

Looks good but for me (in the meantime I've made a completely clean flash) I didn't looked at watts.
I looked on time and for me the charging time is too slow, it takes more than 1 hour for charging 50 % up, regardless if starting with 20 or 50 %..... The same charger worked before on A10 A10 at least in double speed.
What could be the prob?

Check your official charger. Xiaomi claims 33W, 59% in 30 min - but if your charger is rated the same as mine (max 18 watts but realistically 13-14 watts) then it's expected to be at least an hour. If your charger is actually rated for 33 watts then you should indeed be getting a faster charge.

It's a bit cheeky to advertise your phone as 33 watts fast charging and then not include a charger which can actually do that.

When you say A10... do you mean Samsung A10? Not Xiaomi RedMi Note 10 Pro? Fast charging on Xiaomi is proprietary.

 

[Laptapper]

Check your official charger. Xiaomi claims 33W, 59% in 30 min - but if your charger is rated the same as mine (max 18 watts but realistically 13-14 watts) then it's expected to be at least an hour. If your charger is actually rated for 33 watts then you should indeed be getting a faster charge.

It's a bit cheeky to advertise your phone as 33 watts fast charging and then not include a charger which can actually do that.

When you say A10... do you mean Samsung A10? Not Xiaomi RedMi Note 10 Pro? Fast charging on Xiaomi is proprietary.

With A10 I meen android 10 and also android 11 at the rn10promax

 

[fl4shb1c]

With A10 I meen android 10 and also android 11 at the rn10promax

Gotcha!

To my knowledge the rn10promax was released in March 2021 and shipped with Android 11. If you've had other custom roms with Android 10, then you've introduced another x-factor. It's possible (although unlikely) that the custom A10 rom you were using was reading an incorrect battery size and so it only appeared to be charging faster(?). Have a look at your charger... if the information on it matches mine, then either your other ROM would have been reading the battery incorrectly or your charger is doing more that what's advertised.

 

[SnaexCZ]

Is it possible to change the appearance of the QS panel? In version 1.4 it is now like Pixel, previously the time and date were at the top, and the percentage of the battery was on the right. I mean when you put the notification bar down.

 

[t0masz]

how would I go about flashing Magisk if TWRP can't read/decrypt data in Android 12?

 

[Laptapper]

how would I go about flashing Magisk if TWRP can't read/decrypt data in Android 12?

You'll have to format data with yes at first step

 

[Mauco]

Anyone facing problems with brightness? I'm on Sweet and both auto and manual brightness are wrong with sunlight.
I must slide down and up brightness regulation from menu to bypass

 

[Laptapper]

Anyone facing problems with brightness? I'm on Sweet and both auto and manual brightness are wrong with sunlight.
I must slide down and up brightness regulation from menu to bypass

I'm using adjustable auto brightness app and it's much better than all ROM system auto brightness
Search for velis auto brightness in play store, even if it say not for Android 12 it's working good.