Official 5.0 Firmwares For Galaxy Note 3 (Snapdragon) (SM-N9005)

Search This thread

HITMAN-CREED

Senior Member
Aug 5, 2013
1,030
3,260
● Urmia ●
Official 5.0 Firmwares For Galaxy Note 3 (Snapdragon) (SM-N9005)

b2f6418c407ca910c611e80317d0f672b3b96afc.jpg



Firmware Information:

Model: SM-N9005
Model name: GALAXY Note 3 LTE
Country: Taiwan (For Unlocked Phones)
Version: Android 5.0
Changelist: 5502149
Build date: Tue, 25 Aug 2015 10:16:28 +0000
Product code: BRI
PDA : N9005ZSUGOH3
CSC : N9005OZSGOH3
Rom Size: 1.33 Gb


Instructions :
  • Extract (unzip) the firmware file
  • Download Odin v3.09
  • Extract Odin zip-file
  • Open Odin v3.09
  • Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
  • Connect phone and wait until you get a blue sign in Odin
  • Add the firmware file to AP / PDA
  • Make sure re-partition is NOT ticked
  • Click the start button, sit back and wait a few minutes
Video tutorial for this Instructions:
If you have problems installing this rom, this video tutorial is for you.


Download Links:

Click on the links below to download this official firmware:


Important Note:
If you come from Kitkat 4.4.2 rom, it is highly recommend to make a Factory Reset:
After flashing the firmware, Go to Settings. Then, go to the General tab. Click on Backup and reset, then Factory data reset, then RESET DEVICE. Because all of the codes in Android has changed in lollipop, and factory reset, will make it work smoothly and wihout any problems.
BE CAREFUL, YOU WILL LOSE ALL DATA ON YOUR PHONE. BACK UP EVERYTHING FIRST.


Pit File:

if some one comes from leaked lollipop rom, this pit file is for him/her.
This file makes the system partition large enough to accept the rom.
if you come from official 4.4.2 kitkat rom, so you won't need this!

Download Pit File

Other Firmwares & Download Links:
Country: Saudi Arabia (For Unlocked Phones)
Version: Android 5.0
Changelist: 5020004
Build date: Fri, 29 May 2015 10:25:18 +0000
Product code: KSA
PDA : N9005XXUGBOEA
CSC : N9005OJVGBOE4
Rom Size: 1.28 Gb

Download Links:

Click on the links below to download this official firmware:


Country: Poland (For Unlocked Phones)
Version: Android 5.0
Changelist: 3643614
Build date: Tue, 20 Jan 2015 14:05:43 +0000
Product Code: XEO
PDA: N9005XXUGBOA5
CSC: N9005XEOGBOA4
MODEM: N9005XXUGBOA1
File size: 1.22 GB

Download Links:
Click on the links below to download this official firmware:

------------------------------------------------------------------------------------

Thanks to henklbr & thereassaad for download links.
Thanks to android.zealot.fervor for sending tutorial video.
Thanks to DeuXGod for sending pit file.
Thanks to Eversmile for giving me a good suggestion.
Thanks Phonearena for mentioning my name.

(If you find my post useful please push the "Thanks" button)
 
Last edited:

HITMAN-CREED

Senior Member
Aug 5, 2013
1,030
3,260
● Urmia ●
Flash with keeping Root + Knox 0x0!

Flash with keeping Root + Knox 0x0!

Note : In This method, your bootloader will not upgrade, and maybe have some bugs!

DISCLAIMER: I will NOT be held responsible if you lose your Warranty, if you trigger KNOX or if your phone bursts into flames. I'm merely describing what I did and what worked for me (I have bootloader version N9005VJUEND1).

Prerequisites:

  • IMPORTANT: Phone with rooted KitKat firmware installed. (This is an ABSOLUTE necessity, since Mobile Odin DOES NOT support Lollipop!)
  • MobileOdin Pro v4.20
  • Latest SuperSu ZIP installer (v2.45 or higher!)
  • Lollipop ROM (.tar.md5 file)
Instructions:

  • Purchase and install Mobile Odin Pro
  • Put SuperSU zip in a folder in your SD Card (external SD recommended)
  • Put Lollipop ROM (TAR.MD5) in your SD Card (external SD recommended)
  • On Mobile Odin Pro, touch on "Open file ..." load the TAR.MD5 file and confirm
  • Then touch on "OTA / Update ZIP" and select the SuperSU Zip
  • Make sure "Enable EverRoot" box is UNCHECKED.
  • Check "Wipe Dalvik Cache"
  • Recommended but not mandatory: check "Wipe Data and Cache"
  • Touch Flash Firmware and wait.
  • Now, you're in Lollipop with Root and Knox 0x0!



----------------------------------------------------------------------------------------
Thanks to vladeco for sending these Instructions.

(If you find my post useful please push the "Thanks" button)
 
Last edited:

HITMAN-CREED

Senior Member
Aug 5, 2013
1,030
3,260
● Urmia ●
Guide to "Change Lockscreen Effects" In Note 3 Lollipop

Guide to "Change Lockscreen Effects" In Note 3 Lollipop

In this guide you can get Note 4 & S5 Lockscreen Effects.

3wdwa2t5est034qzc7mi.jpg



Lockscreen Effects List:

  • Ripple Effect
  • Light Effect
  • Participle Effect
  • Watercolor Effect
  • Stone Skipping Effect
  • Ink Effect
  • Abstract Tile Effect

Download This Guide:
click on the Guide link below to get instructions:

Guide Link

---------------------------------------------------------------------------------------
Thanks to Aamirx27 for this guide.

(If you find my post useful please push the "Thanks" button)
 
Last edited:

c_codrut

Senior Member
Apr 28, 2011
59
9
Bucharest
You were right, the link from Samfirmware is giving me speeds faster than Samsung-updates, now the time reduced to 1 hour. Thanks!
 

cryostasis25

Senior Member
Apr 11, 2011
498
84
please download and upload the poland xeo firmware tried downloading from sammobile using idm only getting 10kbps :(
 

cryostasis25

Senior Member
Apr 11, 2011
498
84
@eastonfr

Yup will work with unbranded international dunno what will happen if i flashed a rom eg for vodafone so always choose the the one that does not have carrier. Also seeing UK firmware waiting also for BTU.
 

stesteste

Senior Member
Apr 12, 2011
1,209
317
i from uk is it ok to flash Vodafone or will it have branded logo .which is best thx im unlocked uk
 

Top Liked Posts

  • There are no posts matching your filters.
  • 101
    Official 5.0 Firmwares For Galaxy Note 3 (Snapdragon) (SM-N9005)

    b2f6418c407ca910c611e80317d0f672b3b96afc.jpg



    Firmware Information:

    Model: SM-N9005
    Model name: GALAXY Note 3 LTE
    Country: Taiwan (For Unlocked Phones)
    Version: Android 5.0
    Changelist: 5502149
    Build date: Tue, 25 Aug 2015 10:16:28 +0000
    Product code: BRI
    PDA : N9005ZSUGOH3
    CSC : N9005OZSGOH3
    Rom Size: 1.33 Gb


    Instructions :
    • Extract (unzip) the firmware file
    • Download Odin v3.09
    • Extract Odin zip-file
    • Open Odin v3.09
    • Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
    • Connect phone and wait until you get a blue sign in Odin
    • Add the firmware file to AP / PDA
    • Make sure re-partition is NOT ticked
    • Click the start button, sit back and wait a few minutes
    Video tutorial for this Instructions:
    If you have problems installing this rom, this video tutorial is for you.


    Download Links:

    Click on the links below to download this official firmware:


    Important Note:
    If you come from Kitkat 4.4.2 rom, it is highly recommend to make a Factory Reset:
    After flashing the firmware, Go to Settings. Then, go to the General tab. Click on Backup and reset, then Factory data reset, then RESET DEVICE. Because all of the codes in Android has changed in lollipop, and factory reset, will make it work smoothly and wihout any problems.
    BE CAREFUL, YOU WILL LOSE ALL DATA ON YOUR PHONE. BACK UP EVERYTHING FIRST.


    Pit File:

    if some one comes from leaked lollipop rom, this pit file is for him/her.
    This file makes the system partition large enough to accept the rom.
    if you come from official 4.4.2 kitkat rom, so you won't need this!

    Download Pit File

    Other Firmwares & Download Links:
    Country: Saudi Arabia (For Unlocked Phones)
    Version: Android 5.0
    Changelist: 5020004
    Build date: Fri, 29 May 2015 10:25:18 +0000
    Product code: KSA
    PDA : N9005XXUGBOEA
    CSC : N9005OJVGBOE4
    Rom Size: 1.28 Gb

    Download Links:

    Click on the links below to download this official firmware:


    Country: Poland (For Unlocked Phones)
    Version: Android 5.0
    Changelist: 3643614
    Build date: Tue, 20 Jan 2015 14:05:43 +0000
    Product Code: XEO
    PDA: N9005XXUGBOA5
    CSC: N9005XEOGBOA4
    MODEM: N9005XXUGBOA1
    File size: 1.22 GB

    Download Links:
    Click on the links below to download this official firmware:

    ------------------------------------------------------------------------------------

    Thanks to henklbr & thereassaad for download links.
    Thanks to android.zealot.fervor for sending tutorial video.
    Thanks to DeuXGod for sending pit file.
    Thanks to Eversmile for giving me a good suggestion.
    Thanks Phonearena for mentioning my name.

    (If you find my post useful please push the "Thanks" button)
    28
    Flash with keeping Root + Knox 0x0!

    Flash with keeping Root + Knox 0x0!

    Note : In This method, your bootloader will not upgrade, and maybe have some bugs!

    DISCLAIMER: I will NOT be held responsible if you lose your Warranty, if you trigger KNOX or if your phone bursts into flames. I'm merely describing what I did and what worked for me (I have bootloader version N9005VJUEND1).

    Prerequisites:

    • IMPORTANT: Phone with rooted KitKat firmware installed. (This is an ABSOLUTE necessity, since Mobile Odin DOES NOT support Lollipop!)
    • MobileOdin Pro v4.20
    • Latest SuperSu ZIP installer (v2.45 or higher!)
    • Lollipop ROM (.tar.md5 file)
    Instructions:

    • Purchase and install Mobile Odin Pro
    • Put SuperSU zip in a folder in your SD Card (external SD recommended)
    • Put Lollipop ROM (TAR.MD5) in your SD Card (external SD recommended)
    • On Mobile Odin Pro, touch on "Open file ..." load the TAR.MD5 file and confirm
    • Then touch on "OTA / Update ZIP" and select the SuperSU Zip
    • Make sure "Enable EverRoot" box is UNCHECKED.
    • Check "Wipe Dalvik Cache"
    • Recommended but not mandatory: check "Wipe Data and Cache"
    • Touch Flash Firmware and wait.
    • Now, you're in Lollipop with Root and Knox 0x0!



    ----------------------------------------------------------------------------------------
    Thanks to vladeco for sending these Instructions.

    (If you find my post useful please push the "Thanks" button)
    9
    Guide to "Change Lockscreen Effects" In Note 3 Lollipop

    Guide to "Change Lockscreen Effects" In Note 3 Lollipop

    In this guide you can get Note 4 & S5 Lockscreen Effects.

    3wdwa2t5est034qzc7mi.jpg



    Lockscreen Effects List:

    • Ripple Effect
    • Light Effect
    • Participle Effect
    • Watercolor Effect
    • Stone Skipping Effect
    • Ink Effect
    • Abstract Tile Effect

    Download This Guide:
    click on the Guide link below to get instructions:

    Guide Link

    ---------------------------------------------------------------------------------------
    Thanks to Aamirx27 for this guide.

    (If you find my post useful please push the "Thanks" button)
    8
    DISCLAIMER: I will NOT be held responsible if you lose your Warranty, if you trigger KNOX or if your phone bursts into flames. I'm merely describing what I did and what worked for me (I have bootloader version N9005VJUEND1)

    If you want to update and KEEP root + Knox 0x0:

    Prerequisites:
    • IMPORTANT: Phone with rooted KitKat firmware installed. This is an ABSOLUTE necessity, since Mobile Odin DOES NOT support Lollipop!
    • MobileOdin Pro v4.20
    • Latest SuperSu ZIP installer (v2.45 or higher!)
    • Lollipop ROM (.tar.md5 file)


    Instructions: (Mobile Odin DOES NOT support Lollipop!)
    • Purchase and install Mobile Odin Pro
    • Put SuperSU zip in a folder in your SD Card (external SD recommended)
    • Put Lollipop ROM (TAR.MD5) in your SD Card (external SD recommended)
    • On Mobile Odin Pro, touch on "Open file ..." load the TAR.MD5 file and confirm
    • Then touch on "OTA / Update ZIP" and select the SuperSU Zip
    • Make sure "Enable EverRoot" box is UNCHECKED.
    • Check "Wipe Dalvik Cache"
    • Recommended but not mandatory: check "Wipe Data and Cache"
    • Touch Flash Firmware and wait.
    • Voilá, you're in Lollipop with Root and Knox 0x0!
    6
    N9005XXUGBPH2 (Netherlands - PHN)

    XtAQ9j.png
    5deYma.png


    This ROM is based on the the latest ROM for Luxembourg (LUX) released 04 oct 16, and made it compatible for the Netherlands (PHN).
    This is official Samsung ROM, so KNOX won't be triggered!

    What's new:
    * September security patches (Samsung Android Security Updates)
    * Stability improvements

    Model SM-N9005
    Model name GALAXY Note 3 LTE
    Country Netherlands
    Version Android 5.0
    Changelist 9073885
    Build date Wed, 24 Aug 2016 05:24:49 +0000
    Security Patch Level 2016-09-01
    Product code PHN
    PDA N9005XXUGBPH2
    CSC N9005PHNGBOJ1
    Download for install with Odin: MegaNZ

    Place tar-file in AP in Odin!