Official 5.0 Firmwares For Galaxy Note 3 (Snapdragon) (SM-N9005)

Search This thread

antoniskox

Senior Member
Aug 2, 2010
274
28
after downlaod this i have faild from odin ?Any ideas ? I download now the one from the first page to try out

Product Code: SWC
PDA: N9005XXUGBOA5
CSC: N9005VFGGBOA2
MODEM: N9005XXUGBOA1

error

<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUGBOA5_N9005VFGGBOA2_N9005XXUGBOA1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> aboot.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> sbl1.mbn
<ID:0/007> rpm.mbn
<ID:0/007> tz.mbn
<ID:0/007> sdi.mbn
<ID:0/007> NON-HLOS.bin
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img.ext4
<ID:0/007> modem.bin
<ID:0/007> cache.img.ext4
<ID:0/007> hidden.img.ext4
<ID:0/007> FAIL! (Size)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
 

vladeco

Senior Member
Feb 10, 2012
177
111
Rio de Janeiro
DISCLAIMER: I will NOT be held responsible if you lose your Warranty, if you trigger KNOX or if your phone bursts into flames. I'm merely describing what I did and what worked for me (I have bootloader version N9005VJUEND1)

If you want to update and KEEP root + Knox 0x0:

Prerequisites:
  • IMPORTANT: Phone with rooted KitKat firmware installed. This is an ABSOLUTE necessity, since Mobile Odin DOES NOT support Lollipop!
  • MobileOdin Pro v4.20
  • Latest SuperSu ZIP installer (v2.45 or higher!)
  • Lollipop ROM (.tar.md5 file)


Instructions: (Mobile Odin DOES NOT support Lollipop!)
  • Purchase and install Mobile Odin Pro
  • Put SuperSU zip in a folder in your SD Card (external SD recommended)
  • Put Lollipop ROM (TAR.MD5) in your SD Card (external SD recommended)
  • On Mobile Odin Pro, touch on "Open file ..." load the TAR.MD5 file and confirm
  • Then touch on "OTA / Update ZIP" and select the SuperSU Zip
  • Make sure "Enable EverRoot" box is UNCHECKED.
  • Check "Wipe Dalvik Cache"
  • Recommended but not mandatory: check "Wipe Data and Cache"
  • Touch Flash Firmware and wait.
  • Voilá, you're in Lollipop with Root and Knox 0x0!
 
Last edited:

DeuXGod

Senior Member
Nov 11, 2008
561
271
Zurich
after downlaod this i have faild from odin ?Any ideas ? I download now the one from the first page to try out

Product Code: SWC
PDA: N9005XXUGBOA5
CSC: N9005VFGGBOA2
MODEM: N9005XXUGBOA1

error

<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUGBOA5_N9005VFGGBOA2_N9005XXUGBOA1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> aboot.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> sbl1.mbn
<ID:0/007> rpm.mbn
<ID:0/007> tz.mbn
<ID:0/007> sdi.mbn
<ID:0/007> NON-HLOS.bin
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img.ext4
<ID:0/007> modem.bin
<ID:0/007> cache.img.ext4
<ID:0/007> hidden.img.ext4
<ID:0/007> FAIL! (Size)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!

<ID:0/007> FAIL! (Size)

That means that you flashed a PIT file that reduced the size of the system partition and now Odin has no space to finish installing the new version. You can try to wipe first (but I don't think it will do anything) to see if you can get enough space. But most probably you need a PIT file with a bigger partition layout.
 

antoniskox

Senior Member
Aug 2, 2010
274
28
<ID:0/007> FAIL! (Size)

That means that you flashed a PIT file that reduced the size of the system partition and now Odin has no space to finish installing the new version. You can try to wipe first (but I don't think it will do anything) to see if you can get enough space. But most probably you need a PIT file with a bigger partition layout.

thanks for the tip.I can only imagine that has something to do with the firmware i donwloaded...now am trying another one..lets see....
 

Muffycheeks

Senior Member
May 3, 2011
919
196
Something is really very wrong. I made now a bootloader tar.md5 file for me. So I updated with it. Still it says NL8. :(
It makes me crazy. Maybe I have to go back to 4.4.2 Bootloader?
Did someone flash from NL8 to BOA5 Bootloader?


There are steps for the bootloader to stick. Do a search.
 

sosodemi

Senior Member
Dec 9, 2011
213
66
someware
Finally, but I have a N9005 Orange Ro carrier locked, or sim locked, will I have issues if i flash this xeo firmware? ???
Or do i need to be carrier unlocked first ?
thanks in advance.
 

MeXx87

Member
Jan 5, 2013
42
17
I spotted another problem i have... My Phone looses the Wifi passwords after every restart. Video recording isnt working as well. I tried wiping cache and factory reset....

Some ideas?
 

fuel3100

Senior Member
Jun 11, 2009
157
4
AE
is there any custom firmware lollipop available? i want lollipop rooted already. any link? is the firmware same as note 4 ? i mean the updates new features etc..
 

DeuXGod

Senior Member
Nov 11, 2008
561
271
Zurich
I spotted another problem i have... My Phone looses the Wifi passwords after every restart. Video recording isnt working as well. I tried wiping cache and factory reset....

Some ideas?

Make sure that the correct bootloader was flashed like on my screen. If not completely shutdown your phone, use buttons to go into download mode (volume down+home+power) and reflash the firmware in odin.

Sent from my SM-N9005
 

Attachments

  • 1423843653584.jpg
    1423843653584.jpg
    44.4 KB · Views: 1,842

DeuXGod

Senior Member
Nov 11, 2008
561
271
Zurich
is there any custom firmware lollipop available? i want lollipop rooted already. any link? is the firmware same as note 4 ? i mean the updates new features etc..

There's no custom ROM with current build. And no, it's missing some features compared to note 4.

Sent from my SM-N9005
 

Misce

Senior Member
Aug 19, 2013
83
4
Stll stuck at "Checking MD5" in Odin when mounting TWRP file. Desperately need help. What am I missing? Could my phone be making problems? Why?

Tried on 2 different computers, with Odin 3.09 and 1.87, tried removing the battery, resetting PCs... WTH?
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 101
    Official 5.0 Firmwares For Galaxy Note 3 (Snapdragon) (SM-N9005)

    b2f6418c407ca910c611e80317d0f672b3b96afc.jpg



    Firmware Information:

    Model: SM-N9005
    Model name: GALAXY Note 3 LTE
    Country: Taiwan (For Unlocked Phones)
    Version: Android 5.0
    Changelist: 5502149
    Build date: Tue, 25 Aug 2015 10:16:28 +0000
    Product code: BRI
    PDA : N9005ZSUGOH3
    CSC : N9005OZSGOH3
    Rom Size: 1.33 Gb


    Instructions :
    • Extract (unzip) the firmware file
    • Download Odin v3.09
    • Extract Odin zip-file
    • Open Odin v3.09
    • Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
    • Connect phone and wait until you get a blue sign in Odin
    • Add the firmware file to AP / PDA
    • Make sure re-partition is NOT ticked
    • Click the start button, sit back and wait a few minutes
    Video tutorial for this Instructions:
    If you have problems installing this rom, this video tutorial is for you.


    Download Links:

    Click on the links below to download this official firmware:


    Important Note:
    If you come from Kitkat 4.4.2 rom, it is highly recommend to make a Factory Reset:
    After flashing the firmware, Go to Settings. Then, go to the General tab. Click on Backup and reset, then Factory data reset, then RESET DEVICE. Because all of the codes in Android has changed in lollipop, and factory reset, will make it work smoothly and wihout any problems.
    BE CAREFUL, YOU WILL LOSE ALL DATA ON YOUR PHONE. BACK UP EVERYTHING FIRST.


    Pit File:

    if some one comes from leaked lollipop rom, this pit file is for him/her.
    This file makes the system partition large enough to accept the rom.
    if you come from official 4.4.2 kitkat rom, so you won't need this!

    Download Pit File

    Other Firmwares & Download Links:
    Country: Saudi Arabia (For Unlocked Phones)
    Version: Android 5.0
    Changelist: 5020004
    Build date: Fri, 29 May 2015 10:25:18 +0000
    Product code: KSA
    PDA : N9005XXUGBOEA
    CSC : N9005OJVGBOE4
    Rom Size: 1.28 Gb

    Download Links:

    Click on the links below to download this official firmware:


    Country: Poland (For Unlocked Phones)
    Version: Android 5.0
    Changelist: 3643614
    Build date: Tue, 20 Jan 2015 14:05:43 +0000
    Product Code: XEO
    PDA: N9005XXUGBOA5
    CSC: N9005XEOGBOA4
    MODEM: N9005XXUGBOA1
    File size: 1.22 GB

    Download Links:
    Click on the links below to download this official firmware:

    ------------------------------------------------------------------------------------

    Thanks to henklbr & thereassaad for download links.
    Thanks to android.zealot.fervor for sending tutorial video.
    Thanks to DeuXGod for sending pit file.
    Thanks to Eversmile for giving me a good suggestion.
    Thanks Phonearena for mentioning my name.

    (If you find my post useful please push the "Thanks" button)
    28
    Flash with keeping Root + Knox 0x0!

    Flash with keeping Root + Knox 0x0!

    Note : In This method, your bootloader will not upgrade, and maybe have some bugs!

    DISCLAIMER: I will NOT be held responsible if you lose your Warranty, if you trigger KNOX or if your phone bursts into flames. I'm merely describing what I did and what worked for me (I have bootloader version N9005VJUEND1).

    Prerequisites:

    • IMPORTANT: Phone with rooted KitKat firmware installed. (This is an ABSOLUTE necessity, since Mobile Odin DOES NOT support Lollipop!)
    • MobileOdin Pro v4.20
    • Latest SuperSu ZIP installer (v2.45 or higher!)
    • Lollipop ROM (.tar.md5 file)
    Instructions:

    • Purchase and install Mobile Odin Pro
    • Put SuperSU zip in a folder in your SD Card (external SD recommended)
    • Put Lollipop ROM (TAR.MD5) in your SD Card (external SD recommended)
    • On Mobile Odin Pro, touch on "Open file ..." load the TAR.MD5 file and confirm
    • Then touch on "OTA / Update ZIP" and select the SuperSU Zip
    • Make sure "Enable EverRoot" box is UNCHECKED.
    • Check "Wipe Dalvik Cache"
    • Recommended but not mandatory: check "Wipe Data and Cache"
    • Touch Flash Firmware and wait.
    • Now, you're in Lollipop with Root and Knox 0x0!



    ----------------------------------------------------------------------------------------
    Thanks to vladeco for sending these Instructions.

    (If you find my post useful please push the "Thanks" button)
    9
    Guide to "Change Lockscreen Effects" In Note 3 Lollipop

    Guide to "Change Lockscreen Effects" In Note 3 Lollipop

    In this guide you can get Note 4 & S5 Lockscreen Effects.

    3wdwa2t5est034qzc7mi.jpg



    Lockscreen Effects List:

    • Ripple Effect
    • Light Effect
    • Participle Effect
    • Watercolor Effect
    • Stone Skipping Effect
    • Ink Effect
    • Abstract Tile Effect

    Download This Guide:
    click on the Guide link below to get instructions:

    Guide Link

    ---------------------------------------------------------------------------------------
    Thanks to Aamirx27 for this guide.

    (If you find my post useful please push the "Thanks" button)
    8
    DISCLAIMER: I will NOT be held responsible if you lose your Warranty, if you trigger KNOX or if your phone bursts into flames. I'm merely describing what I did and what worked for me (I have bootloader version N9005VJUEND1)

    If you want to update and KEEP root + Knox 0x0:

    Prerequisites:
    • IMPORTANT: Phone with rooted KitKat firmware installed. This is an ABSOLUTE necessity, since Mobile Odin DOES NOT support Lollipop!
    • MobileOdin Pro v4.20
    • Latest SuperSu ZIP installer (v2.45 or higher!)
    • Lollipop ROM (.tar.md5 file)


    Instructions: (Mobile Odin DOES NOT support Lollipop!)
    • Purchase and install Mobile Odin Pro
    • Put SuperSU zip in a folder in your SD Card (external SD recommended)
    • Put Lollipop ROM (TAR.MD5) in your SD Card (external SD recommended)
    • On Mobile Odin Pro, touch on "Open file ..." load the TAR.MD5 file and confirm
    • Then touch on "OTA / Update ZIP" and select the SuperSU Zip
    • Make sure "Enable EverRoot" box is UNCHECKED.
    • Check "Wipe Dalvik Cache"
    • Recommended but not mandatory: check "Wipe Data and Cache"
    • Touch Flash Firmware and wait.
    • Voilá, you're in Lollipop with Root and Knox 0x0!
    6
    N9005XXUGBPH2 (Netherlands - PHN)

    XtAQ9j.png
    5deYma.png


    This ROM is based on the the latest ROM for Luxembourg (LUX) released 04 oct 16, and made it compatible for the Netherlands (PHN).
    This is official Samsung ROM, so KNOX won't be triggered!

    What's new:
    * September security patches (Samsung Android Security Updates)
    * Stability improvements

    Model SM-N9005
    Model name GALAXY Note 3 LTE
    Country Netherlands
    Version Android 5.0
    Changelist 9073885
    Build date Wed, 24 Aug 2016 05:24:49 +0000
    Security Patch Level 2016-09-01
    Product code PHN
    PDA N9005XXUGBPH2
    CSC N9005PHNGBOJ1
    Download for install with Odin: MegaNZ

    Place tar-file in AP in Odin!
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone