[OFFICIAL][9.0.0_r46][ASB_2019-11][grus] XenonHD 9.0 (14-11-2019)

Search This thread

krasCGQ

Recognized Contributor
Apr 13, 2015
5,433
4,938
20
Kendari
kud.my.id
xSXj9TN.png

TeamHorizon's XenonHD ROM builds for Xiaomi Mi 9 SE (grus)
https://www.xenonhd.com/

XenonHD is a custom firmware aka ROM for various Android devices. It is based on LineageOS 16.0 with additional features, performance and battery life improvements.
The idea behind XenonHD is to give users a ROM that is "blazing fast, rock stable and buttery smooth".​


Flashing Instructions:
To install this ROM you will need to have a latest custom Recovery such as TWRP installed.
  • Copy the downloaded ROM to your phone.
  • Boot into your recovery
  • Back up your ROM
  • Make a full wipe (system, data, cache, dalvik)
  • Install the ROM
  • Install GAPPS package
  • Reboot - the first boot can take up to 5 minutes
Installing updates:
  • Copy the downloaded update to your phone.
  • Boot into your recovery
  • Back up your ROM
  • Install the update
  • Optionally wipe caches
  • Reboot

Other Links:
GitHub
Telegram



XDA:DevDB Information
Official XenonHD 9.0 ROM by TeamHorizon, ROM for the Xiaomi Mi 9 SE

Contributors
krasCGQ, dadi11
Source Code: https://github.com/TeamHorizon

ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: MIUI China developer 9.7.4 or July Global stable vendor
Based On: LineageOS

Version Information
Status: Stable
Stable Release Date: 2019-11-14
Beta Release Date: 2019-08-18

Created 2019-08-15
Last Updated 2019-11-16
 

krasCGQ

Recognized Contributor
Apr 13, 2015
5,433
4,938
20
Kendari
kud.my.id
[SIZE=+1]Changelogs[/SIZE]​
03-09-2019 (UTC+8) – Official
  • Allowed vendor version(s) starting this build: China developer 9.7.4, EEA stable V10.3.4.0.PFBEUXM.
  • Synced with XenonHD and LineageOS changes up September 2, 2019 2:30 AM (UTC+8).
  • Compiled with 1st target variant as ARMv8.2-A.
  • Switched to brightness profile from Pixel 3a.
  • Switched to alternative manual network selection.
  • Set status bar height to 112 pixels on portrait.
  • Enabled WiFi single radio chain scan results.
  • Enabled VoLTE, IMS-VT and VoWiFi regardless of carrier support.
  • Disabled Smart Pixels support.
  • Any other miscellaneous changes.
  • kernel: Updated to Linux 4.9.190 and F2FS v5.3-rc1.
  • kernel: Merged android-4.9 changes up to August 25, 2019 (UTC+8).
  • kernel: Updated audio-kernel changes from pyxis-p-oss branch.
  • kernel: Restored Xiaomi's early display hacks.
  • kernel: Switched to 300 Hz timer interrupt.
  • kernel: Switched to ALMK from android-4.9.
  • kernel: Removed showmem notifier framework.
  • kernel: Slightly debloated from debugging features.

19-08-2019 (UTC+8) – Official
  • Synced with XenonHD and LineageOS changes up to August 19, 2019 1:00 PM (UTC+8).
  • Fixed typo in media profiles configuration prop.
  • kernel: Updated DTS, DRM/SDE and touchscreen driver from pyxis-p-oss branch.
  • kernel: Fixed camera service crashes when switching to ultrawide camera sensor due to lack of flash node (broken in grus-p-oss).

18-08-2019 (UTC+8) – Experimental
  • Properly fixed fingerprint on display with SELinux enforcing.

15-08-2019 (UTC+8) – Experimental
  • Initial public build.
 
Last edited:

krasCGQ

Recognized Contributor
Apr 13, 2015
5,433
4,938
20
Kendari
kud.my.id
  • Please be noted that in this initial public build, MIUI China developer 9.7.4 vendor is required, as most of system blobs are taken from that firmware. The requirement might change as time progresses.
  • ROM-side support has yet to be merged; they're present on my forks at KudProject org on GitHub in meantime. Now merged with LineageOS.
 
Last edited:

elpaablo

Senior Member
Nov 18, 2017
291
114
I'm actually using this ROM since yesterday, because I wanted a working SIM management and crDroid was not doing that, and I can say it's stable, light and fast. Battery is happy and so am I. I updated via OTA :D and the bugs I've found seem to be solved. Auto-brightness is more stable and the crash when setting mobile network type is gone. I'll test fingerprint.
PS - I've installed the ROM on top of eea stable 10.3.4.
 
Dec 21, 2017
6
1
Thank you for this ROM dev. :) I uploaded 2 hour ago. Auto screen brightness is working poorly. High light and low light. That's the only problem right now
 
Last edited:

elpaablo

Senior Member
Nov 18, 2017
291
114
Open a terminal emulator and type:

Code:
su
setenforce 0

Then define fingerprint and/or unlock phone with it.
If you want you can switch back to enforced mode by typing:

Code:
setenforce 1

If you want to check SELinux status, type:

Code:
getenforce

This is only temporary. After every reboot SELinux mode will be restored.


By the way, fingerprint is working fine.
 
Last edited:
  • Like
Reactions: fereidooni

Top Liked Posts

  • There are no posts matching your filters.
  • 33
    xSXj9TN.png

    TeamHorizon's XenonHD ROM builds for Xiaomi Mi 9 SE (grus)
    https://www.xenonhd.com/

    XenonHD is a custom firmware aka ROM for various Android devices. It is based on LineageOS 16.0 with additional features, performance and battery life improvements.
    The idea behind XenonHD is to give users a ROM that is "blazing fast, rock stable and buttery smooth".​


    Flashing Instructions:
    To install this ROM you will need to have a latest custom Recovery such as TWRP installed.
    • Copy the downloaded ROM to your phone.
    • Boot into your recovery
    • Back up your ROM
    • Make a full wipe (system, data, cache, dalvik)
    • Install the ROM
    • Install GAPPS package
    • Reboot - the first boot can take up to 5 minutes
    Installing updates:
    • Copy the downloaded update to your phone.
    • Boot into your recovery
    • Back up your ROM
    • Install the update
    • Optionally wipe caches
    • Reboot

    Other Links:
    GitHub
    Telegram



    XDA:DevDB Information
    Official XenonHD 9.0 ROM by TeamHorizon, ROM for the Xiaomi Mi 9 SE

    Contributors
    krasCGQ, dadi11
    Source Code: https://github.com/TeamHorizon

    ROM OS Version: 9.x Pie
    ROM Kernel: Linux 4.x
    ROM Firmware Required: MIUI China developer 9.7.4 or July Global stable vendor
    Based On: LineageOS

    Version Information
    Status: Stable
    Stable Release Date: 2019-11-14
    Beta Release Date: 2019-08-18

    Created 2019-08-15
    Last Updated 2019-11-16
    12
    [SIZE=+1]Known issues[/SIZE]​
    • Kernel will panic when trying to do audio output with more than 192 kHz sampling rate.
    • There might be some other minor issues that I'm unaware of...
    • LineageOS issues
    10
    [SIZE=+1]Changelogs[/SIZE]​
    03-09-2019 (UTC+8) – Official
    • Allowed vendor version(s) starting this build: China developer 9.7.4, EEA stable V10.3.4.0.PFBEUXM.
    • Synced with XenonHD and LineageOS changes up September 2, 2019 2:30 AM (UTC+8).
    • Compiled with 1st target variant as ARMv8.2-A.
    • Switched to brightness profile from Pixel 3a.
    • Switched to alternative manual network selection.
    • Set status bar height to 112 pixels on portrait.
    • Enabled WiFi single radio chain scan results.
    • Enabled VoLTE, IMS-VT and VoWiFi regardless of carrier support.
    • Disabled Smart Pixels support.
    • Any other miscellaneous changes.
    • kernel: Updated to Linux 4.9.190 and F2FS v5.3-rc1.
    • kernel: Merged android-4.9 changes up to August 25, 2019 (UTC+8).
    • kernel: Updated audio-kernel changes from pyxis-p-oss branch.
    • kernel: Restored Xiaomi's early display hacks.
    • kernel: Switched to 300 Hz timer interrupt.
    • kernel: Switched to ALMK from android-4.9.
    • kernel: Removed showmem notifier framework.
    • kernel: Slightly debloated from debugging features.

    19-08-2019 (UTC+8) – Official
    • Synced with XenonHD and LineageOS changes up to August 19, 2019 1:00 PM (UTC+8).
    • Fixed typo in media profiles configuration prop.
    • kernel: Updated DTS, DRM/SDE and touchscreen driver from pyxis-p-oss branch.
    • kernel: Fixed camera service crashes when switching to ultrawide camera sensor due to lack of flash node (broken in grus-p-oss).

    18-08-2019 (UTC+8) – Experimental
    • Properly fixed fingerprint on display with SELinux enforcing.

    15-08-2019 (UTC+8) – Experimental
    • Initial public build.
    8
    • Please be noted that in this initial public build, MIUI China developer 9.7.4 vendor is required, as most of system blobs are taken from that firmware. The requirement might change as time progresses.
    • ROM-side support has yet to be merged; they're present on my forks at KudProject org on GitHub in meantime. Now merged with LineageOS.
    7
    Small update is pushed with FOD properly works in SELinux enforcing.

    Also, link to 9.7.4 vendor image just in case anyone needs.
    It's extracted from the fastboot image; just decompress it before flashing.
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone