• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[OFFICIAL] BlissROMs Q Mod //BLESS

Search This thread

eremitein

Senior Member
May 16, 2017
1,133
1,418
Xiaomi Mi A2 Lite
BlissROMs 12.12


Your warranty is now void!
We're not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at us for messing up your device, we will laugh at you


BLESS is a project which based on BlissROMs with @AndyYan's and @phhusson's Treble GSI patches. Built with some Andy's patches & recommendations, also even without "ALLOW_MISSING_DEPENDENCIES=true" flag. And system can run with SELinux enforced state, as original Phh AOSP GSI. Fully compatible with PHH-Treble patches exclude one low level change: by default exist file /system/phh/secure (for Google Certification PASS), so if you can boot LineageOS GSI, but can't boot BLESS - try to removing that file

UPDATE VERSION
base: BlissROMs 12.12
latest build: 2020.10.15
treble patches: v222+
SPL: 5 Oct 2020


FEATURES/CHANGES
• no root, no SuperUser app, have "secure" file for SafetyNet
• Phh Settings moved to the bottom
• tuning of the status bar, icons more tightly to each other
• added option to set statusbar icons spacing (need reboot to properly apply changes)
• few changes to reduce consumed resources - more space, more speed, more battery life
• fixed the display of the status of security patches (GSI specific)
• now some pre-installed Apps can be disables from Settings
• fixed offline charger to works in enforced mode (still not for all devices)
• fixed call recording in Dialer (not supports on all devices)
• deep sleep fix included (based on patch by @Hami_Do)
• on battery saver auto dark mode disabled, you can choice light/dark theme
• slightly fixed system UI theme (QS bottom icons padding, search bar in Settings etc)
• in stock camera removed HAL3 green artefacts which exist on few Xiaomi devices
• disabled some disputable Google components, for sample is fixed overall WiFi speed in the aggregate with GPS + Bluetooth
• option to set system UI optimization level (use careful, do not set IPS level for OLED)
• fixed DeskClock widget (with the GoogleSans font was cropped)
• turned off the indicator flashing when the battery level is low
• added option "Swipe for notifications" for fingerprint scanner
• in Dialer added option to set fullscreen contact's photo
• reworked dark mode support for few apps (Files, Calculator, DeskClock)
• replaced apps: Gallery, Dialer, Messaging, Calculator
• added dex-optimisation rule (for the services)
• French and Russian translations for custom settings
• for Mi A2 Lite LTE is set by default
• updated Redmi 6 Pro overlay
• fixed boot on Mi 10 (Lite), K30 (Pro)
• removed Updater (useless in GSI)
• fixed AOD settings
• have ARM A-only Go (1.9+Gb)
• fixed Google cast (audio mirroring) and AirAudio
• added back old AoD settings from 12.10 version
• all builds now have system root 'su' and Superuser, also no "secure" file
• due to those changes no SafetyNet pass by default, you should set it manually
• added custom Google Cloud restore option (Settings > Accounts)
• by default enabled automatic brightness and LiveDisplay
• added DT2W support for QIN 2
• initial Redmi 9 'galahad' overlay
• added few patches from GrapheneOS
*grayed options not realized yet

DOWNLOAD (CLICK H3RE)
vanilla, gapps: all architectures

NAMING
Some information you should know about knowing what type of gsi it is

<ARCH>_xyZ

<ARCH> can either be arm, a64 (arm32_binder64) or arm64
x can either be a or b
y can either be v, o, g or f
Z can be N or S

b = a/b
a = a-only

g = gapps
o = gapps-go
v = vanilla (no gapps included)
f = floss (free & open source apps instead gapps)

N = no superuser
S = superuser included

so in most common example "arm64_avN" is ARM64 A-only vanilla with no superuser

CONTACTS
> telegram group
> project page


KN0WN BUGS
• excluding fixes, the same as on all Q GSI (in some cases doesn't work: broadcasting on TV, calls via BT; offline charging does not work normally; problems with GPS etc etc)
NOTE: always test ROM first without Magisk (with clean boot ramdisk). and don't send me bug reports if you have:
a) Magisk installed
b) modified/custom vendor or kernel
c) dirty flashing rom without wiping data
d) modified props values (another device fingerprint and so on)


CREDITS
persons: @phhusson, @AndyYan, @electrikjesus
projects: TrebleGSI • BlissROMs • crDroid • LineageOS • Havoc-OS • GrapheneOS
 
Last edited:

thecoolkid

Senior Member
May 20, 2014
426
206
Hi, is notification pulldown supposed to look like that? I find it very missaligned and lacking padding ;/

attachment.php
 

Attachments

  • Screenshot_20200728-222509_Blissify_Launcher.jpg
    Screenshot_20200728-222509_Blissify_Launcher.jpg
    102.1 KB · Views: 5,189

thecoolkid

Senior Member
May 20, 2014
426
206
Padding has been a thing since AGES
Literally, look it up, try a P Aosp ROM (no modifications)

Or just, well, change the padding


But I guess you're too lazy to do that :/

Edit:
For clarification
Padding gets set by vendor in most ROMs

Don't call me lazy when you know nothing. I flashed every P and Q rom onto my tablet (including phh aosp) and the ones that boot look fine, meaning just as good as on my phone.

If it's a vendor thing, is there a vendor overlay I have to delete or what? If I knew how to modify and build ROMs I wouldn't be posting about it here.
 
Last edited:

Rush

Senior Member
Apr 19, 2019
763
130
neuss
OnePlus 5T
Don't call me lazy when you know nothing. I flashed every P and Q rom onto my tablet (including phh aosp) and the ones that boot look fine, meaning just as good as on my phone.

If it's a vendor thing, is there a vendor overlay I have to delete or what? If I knew how to modify and build ROMs I wouldn't be posting about it here.
That's because Bless forces a low padding

Trust me, I know a little more than you
Not because I flashed countless ROMs

Because I make ROMs

Edit
There is a command to change padding, I just don't know it out of my head
 

Top Liked Posts

  • There are no posts matching your filters.
  • 20
    BlissROMs 12.12


    Your warranty is now void!
    We're not responsible for bricked devices, dead SD cards,
    thermonuclear war, or you getting fired because the alarm app failed. Please
    do some research if you have any concerns about features included in this ROM
    before flashing it! YOU are choosing to make these modifications, and if
    you point the finger at us for messing up your device, we will laugh at you


    BLESS is a project which based on BlissROMs with @AndyYan's and @phhusson's Treble GSI patches. Built with some Andy's patches & recommendations, also even without "ALLOW_MISSING_DEPENDENCIES=true" flag. And system can run with SELinux enforced state, as original Phh AOSP GSI. Fully compatible with PHH-Treble patches exclude one low level change: by default exist file /system/phh/secure (for Google Certification PASS), so if you can boot LineageOS GSI, but can't boot BLESS - try to removing that file

    UPDATE VERSION
    base: BlissROMs 12.12
    latest build: 2020.10.15
    treble patches: v222+
    SPL: 5 Oct 2020


    FEATURES/CHANGES
    • no root, no SuperUser app, have "secure" file for SafetyNet
    • Phh Settings moved to the bottom
    • tuning of the status bar, icons more tightly to each other
    • added option to set statusbar icons spacing (need reboot to properly apply changes)
    • few changes to reduce consumed resources - more space, more speed, more battery life
    • fixed the display of the status of security patches (GSI specific)
    • now some pre-installed Apps can be disables from Settings
    • fixed offline charger to works in enforced mode (still not for all devices)
    • fixed call recording in Dialer (not supports on all devices)
    • deep sleep fix included (based on patch by @Hami_Do)
    • on battery saver auto dark mode disabled, you can choice light/dark theme
    • slightly fixed system UI theme (QS bottom icons padding, search bar in Settings etc)
    • in stock camera removed HAL3 green artefacts which exist on few Xiaomi devices
    • disabled some disputable Google components, for sample is fixed overall WiFi speed in the aggregate with GPS + Bluetooth
    • option to set system UI optimization level (use careful, do not set IPS level for OLED)
    • fixed DeskClock widget (with the GoogleSans font was cropped)
    • turned off the indicator flashing when the battery level is low
    • added option "Swipe for notifications" for fingerprint scanner
    • in Dialer added option to set fullscreen contact's photo
    • reworked dark mode support for few apps (Files, Calculator, DeskClock)
    • replaced apps: Gallery, Dialer, Messaging, Calculator
    • added dex-optimisation rule (for the services)
    • French and Russian translations for custom settings
    • for Mi A2 Lite LTE is set by default
    • updated Redmi 6 Pro overlay
    • fixed boot on Mi 10 (Lite), K30 (Pro)
    • removed Updater (useless in GSI)
    • fixed AOD settings
    • have ARM A-only Go (1.9+Gb)
    • fixed Google cast (audio mirroring) and AirAudio
    • added back old AoD settings from 12.10 version
    • all builds now have system root 'su' and Superuser, also no "secure" file
    • due to those changes no SafetyNet pass by default, you should set it manually
    • added custom Google Cloud restore option (Settings > Accounts)
    • by default enabled automatic brightness and LiveDisplay
    • added DT2W support for QIN 2
    • initial Redmi 9 'galahad' overlay
    • added few patches from GrapheneOS
    *grayed options not realized yet

    DOWNLOAD (CLICK H3RE)
    vanilla, gapps: all architectures

    NAMING
    Some information you should know about knowing what type of gsi it is

    <ARCH>_xyZ

    <ARCH> can either be arm, a64 (arm32_binder64) or arm64
    x can either be a or b
    y can either be v, o, g or f
    Z can be N or S

    b = a/b
    a = a-only

    g = gapps
    o = gapps-go
    v = vanilla (no gapps included)
    f = floss (free & open source apps instead gapps)

    N = no superuser
    S = superuser included

    so in most common example "arm64_avN" is ARM64 A-only vanilla with no superuser

    CONTACTS
    > telegram group
    > project page


    KN0WN BUGS
    • excluding fixes, the same as on all Q GSI (in some cases doesn't work: broadcasting on TV, calls via BT; offline charging does not work normally; problems with GPS etc etc)
    NOTE: always test ROM first without Magisk (with clean boot ramdisk). and don't send me bug reports if you have:
    a) Magisk installed
    b) modified/custom vendor or kernel
    c) dirty flashing rom without wiping data
    d) modified props values (another device fingerprint and so on)


    CREDITS
    persons: @phhusson, @AndyYan, @electrikjesus
    projects: TrebleGSI • BlissROMs • crDroid • LineageOS • Havoc-OS • GrapheneOS
    8
    Update (2020.08.28)

    • phh-treble patches v222+
    • current BlissROMs 12.11 sources
    • Snap camera replaced by AOSP Camera2 (for better GSI compatibility)
    • also did a much works for GSI compatibility, 12.11 haven't support ARM32 by default
    • added Gapps variants: used normal webview (no errors to installing Chrome), stock launcher with Google Feed (and without crappy search bar)
    • size of gappsed version is huge! arm64 2.7GB+, arm 2.1GB+, a64 2GB+
    • few changes to reduce consumed resources - more space, more speed, more battery life
    • set generic nodes for QS system info
    • Bromite webview updated to v84.0.4147.121

    DOWNLOAD //all architectures
    3
    BLESS R 2021.02.25 (beta1)
    download /// changelog