• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[OFFICIAL] BlissROMs R Mod //BLESS11

Search This thread

eremitein

Senior Member
May 16, 2017
1,133
1,416
Xiaomi Mi A2 Lite
BlissROMs 14.2


Your warranty is now void!
We're not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at us for messing up your device, we will laugh at you


BLESS 11 is a project which based on BlissROMs 14.x with @AndyYan's and @phhusson's Treble GSI patches. Built with some Andy's patches & recommendations, also even without "ALLOW_MISSING_DEPENDENCIES=true" flag. And system can run with SELinux enforced state, as original Phh AOSP GSI. Fully compatible with PHH-Treble patches. Has dynamic root which can be activated/deactivated without reboot - 'su' binary and SuperUser app (can works on all devices even with system read-only). Also has dynamic SafetyNet helper (but it compatible not with all devices), users have four ways to pass SafetyNet: a. just enable SafetyNet option (recommended) b. disable SafetyNet and enable "Spoof Pixel 5" then reboot c. enable both options and reboot d. mount system as RW and create empty file /system/phh/secure (legacy method), and in the Recovery do Wipe Data or Factory reset

UPDATE VERSION
base: BlissROMs 14.2
latest build: 2021.05.02
treble patches: v306
SPL: 5 April 2021

FEATURES/CHANGES
see Project page changelog

DOWNLOAD (CLICK H3RE)
vanilla, gapps, go-gapps: all possible architectures

NAMING
Some information you should know about knowing what type of gsi it is

<ARCH>_xyZ

<ARCH>
can either be arm, a64 (arm32_binder64) or arm64
x
can either be a or b
y
can either be v, o, g or f
Z
can be N or S

b
= a/b
a = a-only

g = gapps
o = gapps-go
v = vanilla (no gapps included)
f = floss (free & open source apps instead gapps)

N = no superuser
S = superuser included
Z = dynamic superuser included

-lite = for VNDK Lite vendors (also can help with broken camera even on normal VNDK vendors)

so in most common example "arm64_avZ" is ARM64 A-only vanilla with dynamic superuser

CONTACTS
> telegram group
> project page

KN0WN BUGS
• excluding fixes, the same as on all R GSI (in some cases doesn't work: broadcasting on TV, calls via BT; offline charging does not work normally etc etc)
NOTE: always test ROM first without Magisk (with clean boot ramdisk). and don't send me bug reports if you have:
a) Magisk installed
b) modified/custom vendor or kernel
c) dirty flashing rom without wiping data
d) modified props values (another device fingerprint and so on)


CREDITS
persons: @phhusson, @AndyYan, @electrikjesus
projects: TrebleGSI • BlissROMs • crDroid • LineageOS • Havoc-OS • GrapheneOS • ABC rom • PixelExperience • SyberiaOS • Evolution-X
 
Last edited:

eremitein

Senior Member
May 16, 2017
1,133
1,416
Xiaomi Mi A2 Lite
Hi folks, as you maybe know all my GSI works suspended
Build server damaged and now for maintenance, I haven't information about his further fate
So... I don't know when I can resume my GSI building

By the way, this is not my server, literally I can't do anything to help
I can't even send money, my country is not supported in many payment systems

If you want to help, you can send donations to https://www.paypal.com/paypalme/electrikjesus
(he is the owner of the server, and he long gives me his server - I made a lot of GSI builds on it)
 
  • Sad
Reactions: santosst

juandi34

Member
Nov 25, 2016
44
3
I have a Blackview BV9600E phone, and ROM file "bless-v306-210502-arm64-bgZ.img" runs perfect.
Only has a little thing that was aviable on previous revision: LED NOTIFICATIONs has no control, so I must install a led control APK from Google PlayStore (LIGHT FLOW).
Also, System Camera is very poor, but runs perfectly.
The problem I cannot solve is aviable Gpaid to use NFC, because it detects "non original ROM", because I think I have not rooted system.

We are expecting new revision (Like Samsung has yet new beta).
Many thanks.
 

eremitein

Senior Member
May 16, 2017
1,133
1,416
Xiaomi Mi A2 Lite
The problem I cannot solve is aviable Gpaid to use NFC, because it detects "non original ROM", because I think I have not rooted system.
try this:

SafetyNet Pass needed for many things, this is an important feature of Android. It needed for Play Store certification, GPay etc. Some apps (like bank clients) even can't run if SafetyNet broken
In my nowadays GSIs users have three normal ways to pass SafetyNet (always clean Google Play market data after changes)
a. just enable SafetyNet option (recommended) - and don't forget disable SuperUser first!
b. enable also "Spoof Pixel 5" (leave SafetyNet enabled) and reboot
c. create empty file /system/phh/secure with root file manager and reboot (if your device support RW system access)
 

juandi34

Member
Nov 25, 2016
44
3
try this:

SafetyNet Pass needed for many things, this is an important feature of Android. It needed for Play Store certification, GPay etc. Some apps (like bank clients) even can't run if SafetyNet broken
In my nowadays GSIs users have three normal ways to pass SafetyNet (always clean Google Play market data after changes)
a. just enable SafetyNet option (recommended) - and don't forget disable SuperUser first!
b. enable also "Spoof Pixel 5" (leave SafetyNet enabled) and reboot
c. create empty file /system/phh/secure with root file manager and reboot (if your device support RW system access)
Also, there is another problem I have missed on the last message:
Call Recording options does not appears on this rom.
I must install an APK to record it (using ROOT to works fine).
But 4PDA friends, tell me that it must appears on this rom: What´s happend ?
 

juandi34

Member
Nov 25, 2016
44
3
try this:

SafetyNet Pass needed for many things, this is an important feature of Android. It needed for Play Store certification, GPay etc. Some apps (like bank clients) even can't run if SafetyNet broken
In my nowadays GSIs users have three normal ways to pass SafetyNet (always clean Google Play market data after changes)
a. just enable SafetyNet option (recommended) - and don't forget disable SuperUser first!
b. enable also "Spoof Pixel 5" (leave SafetyNet enabled) and reboot
c. create empty file /system/phh/secure with root file manager and reboot (if your device support RW system access)
It doesn´t works.
I try and the error is keep going.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 12
    BlissROMs 14.2


    Your warranty is now void!
    We're not responsible for bricked devices, dead SD cards,
    thermonuclear war, or you getting fired because the alarm app failed. Please
    do some research if you have any concerns about features included in this ROM
    before flashing it! YOU are choosing to make these modifications, and if
    you point the finger at us for messing up your device, we will laugh at you


    BLESS 11 is a project which based on BlissROMs 14.x with @AndyYan's and @phhusson's Treble GSI patches. Built with some Andy's patches & recommendations, also even without "ALLOW_MISSING_DEPENDENCIES=true" flag. And system can run with SELinux enforced state, as original Phh AOSP GSI. Fully compatible with PHH-Treble patches. Has dynamic root which can be activated/deactivated without reboot - 'su' binary and SuperUser app (can works on all devices even with system read-only). Also has dynamic SafetyNet helper (but it compatible not with all devices), users have four ways to pass SafetyNet: a. just enable SafetyNet option (recommended) b. disable SafetyNet and enable "Spoof Pixel 5" then reboot c. enable both options and reboot d. mount system as RW and create empty file /system/phh/secure (legacy method), and in the Recovery do Wipe Data or Factory reset

    UPDATE VERSION
    base: BlissROMs 14.2
    latest build: 2021.05.02
    treble patches: v306
    SPL: 5 April 2021

    FEATURES/CHANGES
    see Project page changelog

    DOWNLOAD (CLICK H3RE)
    vanilla, gapps, go-gapps: all possible architectures

    NAMING
    Some information you should know about knowing what type of gsi it is

    <ARCH>_xyZ

    <ARCH>
    can either be arm, a64 (arm32_binder64) or arm64
    x
    can either be a or b
    y
    can either be v, o, g or f
    Z
    can be N or S

    b
    = a/b
    a = a-only

    g = gapps
    o = gapps-go
    v = vanilla (no gapps included)
    f = floss (free & open source apps instead gapps)

    N = no superuser
    S = superuser included
    Z = dynamic superuser included

    -lite = for VNDK Lite vendors (also can help with broken camera even on normal VNDK vendors)

    so in most common example "arm64_avZ" is ARM64 A-only vanilla with dynamic superuser

    CONTACTS
    > telegram group
    > project page

    KN0WN BUGS
    • excluding fixes, the same as on all R GSI (in some cases doesn't work: broadcasting on TV, calls via BT; offline charging does not work normally etc etc)
    NOTE: always test ROM first without Magisk (with clean boot ramdisk). and don't send me bug reports if you have:
    a) Magisk installed
    b) modified/custom vendor or kernel
    c) dirty flashing rom without wiping data
    d) modified props values (another device fingerprint and so on)


    CREDITS
    persons: @phhusson, @AndyYan, @electrikjesus
    projects: TrebleGSI • BlissROMs • crDroid • LineageOS • Havoc-OS • GrapheneOS • ABC rom • PixelExperience • SyberiaOS • Evolution-X
    2
    2
    2
    awesomeness
    2
    This gsi smooth and stable, but i guess bliss team not put all cuztomise setting yet. And they change from lineage to aosp with this version