HotSpot problem with 26/12/2019 build. Can't activate it. Anyone else?
Mines working here, on 30/12 build, usually update weeklyish and haven't had a problem with hotspots before.
HotSpot problem with 26/12/2019 build. Can't activate it. Anyone else?
I cannot confirm that issue. I just tested the 28Dec build with an 8GB USB key and it works fine.I need a hint. my fresh installed lineageos has no OTG support.
The mobile does not recognize an USB stick, either directly or via an OTG cable.
I cannot confirm that issue. I just tested the 28Dec build with an 8GB USB key and it works fine.
You could have first try reformatting your usb stick.Thx for your info. Mmmmh.... I wiped the phone again and reinstall one more time - without any success.
Maybe my phone is broken. I havn't OTG support in recovery tool too. ?!
Then flash stock android mm from sony using emma. If it doesn't work on stock then it is hardwear issue.Problem remains, I have tested several USB sticks and in all cases they won´t run. The same sticks work on other mobiles (eg. Samsung A3 and Sony Z1c)
Hello Everybody,
I use this rom with my Z3c every day. Still two problems annoying :
- Very loud call and high volume when we take a call on the phone. Only one solution : play with volume level before start to speak. Not very pratical.
- When the phone is connected in bluetooth and when I receive a call, I cannot hear the caller. No problem when it's me making a call.
Others people have these kinds of issue ?
I join the question. The same problem. In the settings, the sound of the spoken speaker is at a minimum, and when you call or answer a call, the volume sliders are at a minimum, and yells at a maximum. We press the rocker down - the scroll engines and so below and the volume does not change. Move the sound to the maximum - the volume does not change. Then we move down - and lo and behold! the sound decreases. And so every time the engines call at a minimum, and the speaker yells at full (regardless of settings).
do thisissue (wifi dosent connect in Iran)
[email protected]:~$ cat /etc/os-release
NAME="Linux Mint"
VERSION="19.1 (Tessa)"
ID=linuxmint
ID_LIKE=ubuntu
PRETTY_NAME="Linux Mint 19.1"
VERSION_ID="19.1"
android-tools-adb android-tools-fastboot
[email protected]:~$ sudo fastboot flash recovery twrp.img
target didn't report max-download-size
sending 'recovery' (13262 KB)...
OKAY [ 0.419s]
writing 'recovery'...
OKAY [ 0.892s]
finished. total time: 1.311s
This thread, including the TWRP download link on the OP is meant for the Z3 Compact phones (D5803/D5833), not the Z3 Tablet Compact (SGP621/SGP651).Hi Folks!
Thank you very much for all your work and efforts to keep the Sony Xperia Z3 Tablet Compact up to date!
I'm currently running LineageOS version 14.1 on my LTE tablet but the poor battery management made me looking for an update what led me to your thread.
My issue:
After having flashed the recommended TWRP version, I cannot manage to boot into TWRP!
My computer:
Installed packages:
My tablet:
Sony Xperia Z3 Compact Tablet with LTE
OS: LineageOS 14.1-20170728-UNOFFICIAL-Lowtraxx-scorpion
Build number: lineage_scorpion-userdebug 7.1.2 NJH47D b33367a65f test-keys
Android-Version: 7.1.2
Developer Options enabled:
- Extended Reboot: check
- Android debugging: check
- Debugging notification: check
- Local terminal: check
- Confirm Apps via USB: check
What have I done, so far:
1) Downloaded recommended TWRP version twrp-3.3.1-0.4-z3c.img to my computer
2) Renamed it to twrp.img
3) Connected tablet to computer pressing the volume down button on the tablet
4) Tablet shows blue LED: OK!
5) Started terminal, ran command:
My assumption: Flashing succeeded!
Now whenever I try to boot into recovery mode in order to start TWRP, the LED turns orange but TWRP will never show up. I tried it turning off the tablet, then turning it on pressing the volume up button, tried it also with the volume down button. Finally I tried to reboot into recovery using the respective option in the extended reboot menu when the OS is running.
Did I miss sth.?
Thank you very much!
[COLOR="Purple"]#include <std_disclaimer.h>[/COLOR]
[COLOR="Navy"]/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/[/COLOR]
Hi,Hi @NeoArian
I am using Lineage OS 16 for a year now. I have been there from pretty much the beginning. I just tried the latest nightly and the audio while calling in normal mode is just on point and the loudspeaker mode is also significantly louder, than in previous build. I am very happy to see this issue being fixed after that long amount of time. I honestly wasn't believing it would be ever fixed.
Do you remember the bug when the audio was played super loud and then it was getting quieter and quieter? I think the only problem left now is to make sound in any part of system or any app as loud as it was while this bug was occurring. I think that the maximum loudness of phone in lineage is like 80% of the maximum volume on stock. The same applies for loudspeaker mode - it is now significantly louder, but it steel isn't as loud as stock. It can be also just me imagining the problem, because after all of those audio issues I don't know if I can trust my ears anymore.
Right now the builds are official which would suggest that everything is working. Well I still have some problems:
-the wfd (wifi display/mirracast) is sometimes WORKING for me. I remember that it wasn't working so it was abandoned, but later on it was again enabled, because it wasn't causing restarts anymore. I don't remember if you did something to solve this issue but it seems that problem solved itself. I tried connecting to my windows laptop and after couple of tries the phone CONNECTED. For the first time in year I was able to connect. Here are my observations:
- the popup on windows is always displayed when device tries to connect to it
- from that popup I can click to connect to device and the phone either decides to connect or not and then the message appears on the windows that says something like "Secured content can't be played on this device"
-audio is being send but is little off sync
-video is sluggish, artifacts can be seen
-after connection is established phone often disconnects from wifi network. If i try to connect to wifi again it is stuck on "Obtaining IP address". It can also happened that the phone connects to wfd and DOESN'T disconnects from wifi. If that happens the video stream is super, mega, ultra blurry, off sync, artifacts can be observed, video is very choppy and connectivity is going to be lost.
As the connection can be established nowadays, can you do something to fix the huge lag while using wfd and connected to wifi?
Next thing is Fm Radio. It doesn't work for me anymore even after manually selecting the frequency (like it was left before).
That is all what I think is left unpolished on lineage side. The rest is regarding TWRP.
-the signature verification always fails on official zips. I don't know if it is the problem with TWRP, that can't verify the zip or the zip itself has wrong signature.
-can't perform OTA updates. I must manually install each update.
-the time in logs is wrong
-after any action performed in TWRP I get error saying ~Can't mount storage.
I attach logs.
Thanks for all of your work. I am looking forward official Lineage OS 17.1 while it gets out from WIP![]()
So I flashed twrp, and I can't perform OTA. When I click Install in updater phone reboots and then hangs at sony logo and led flashes blue. Forcefully turned off the phone, and booted to twrp. Script started executing, but ended up with the error as before. After that I tried to manually install zip, but as you may expect, without success. Here are logs: