[OFFICIAL] NusantaraProject Mi 10T/Pro Apollo [24/04/2023 | Android 13]

Search This thread

Zheo

New member
May 30, 2022
1
0
Flashing instructions

Clean Flash
1. Download the proper flashable ZIP for your device
2. Reboot to Recovery
3. Flash the ROM
4. Flash firmware
5. Format data
6. Reboot to System

Or

3. Flash the ROM
4. Flash firmware
5. Format data
6. Flash DFE (removing encryption)
7. Reboot to System

Dirty Flash
1. Download the proper flashable ZIP for your device
2. Reboot to Recovery
3. Flash the ROM
4. Reboot to System



As always, do with your own risks 🙂
How if I want to flash magisk?
5. Format data
6. Flash DFE
7. Flash magisk
8. Reboot system

Or
5. Format data
6. Flash magisk
7. Flash DFE
8. Reboot system

Which one is correct?
Thanks in advance
 

Zeljko991

Member
Apr 21, 2022
9
1
I have issues with connecting phone to PC, I cant select anything, like File Transfer or any other option
 

mikeshutte

Member
Feb 21, 2015
34
11
Not sure if anyone else is having this issue, but I can't get audio to play when screen casting. It won't stream the audio to the device. It only plays on the phone. If anyone may possibly know a fix I would greatly appreciate the help. I'm running the latest 4.6 build of nusantara.
 
D

Deleted member 12205277

Guest
I don't know if it was a coincidence, but I decided to test it a bit and although my experience is not enough to give a correct verdict, I can say that without a doubt I obtained the lowest temperatures that in any other rom, including the stock one, with the brightness At the maximum it seemed as if it was at the minimum with another, that together with the fact that it works with Android 13.

But since there was no clear and detailed guide on how to flash, nor was there a recovery provided or suggested, and the battery life was by far the worst of all, I didn't want to continue with Nusantara, perhaps doing things by heart as I saw fit. They must do not have battery problems, but I do not know how to do it because it is not indicated anywhere, except for general steps in the FAQ.
 
I don't know if it was a coincidence, but I decided to test it a bit and although my experience is not enough to give a correct verdict, I can say that without a doubt I obtained the lowest temperatures that in any other rom, including the stock one, with the brightness At the maximum it seemed as if it was at the minimum with another, that together with the fact that it works with Android 13.

But since there was no clear and detailed guide on how to flash, nor was there a recovery provided or suggested, and the battery life was by far the worst of all, I didn't want to continue with Nusantara, perhaps doing things by heart as I saw fit. They must do not have battery problems, but I do not know how to do it because it is not indicated anywhere, except for general steps in the FAQ.
Hi, thank you for your feedback. Guide regarding installation is on the first page, battery problem will rise gradually since our device is 2 yr old now. I'll make post regard a13 after this
 
NusantaraProject | Mi 10T/Pro / apollo/\n

------ Date : 17/09/2022 | Tambora 5.0 ------

Device Changelogs :
• Initial public release of Android 13 for apollo/n
• Update some blobs from miui_APOLLOGlobal_V13.0.6.0.SJDMIXM https://t.me/notasupportgroup/34656
• Added libmisound and audiosphere blobs
• Added MiSound Enhancer
• Added HBM preference
• *mix_r12

Notes:
• Android 13
• V13.0.6.0.SJDMIXM firmware
• Basic / core Gapps recommended for vanilla
• Clean flash is recommended
• dirty flash from 4.7 its possible
• currently we're not using FBEv2 encryption

Bugs:
• You tell me with proper logs

Thanks To:
• Allah SWT
• APOLLO Brickers Community & Other contributor.
• Testers

Download link on the first page
#Android13 #nusantaraproject #apollo #tambora
 
D

Deleted member 12205277

Guest
Hi, thank you for your feedback. Guide regarding installation is on the first page, battery problem will rise gradually since our device is 2 yr old now. I'll make post regard a13 after this
I am sorry to respond with a disagreement, because it usually generates conflict and it is not my intention. I understand what you say about the battery degrading as it is used, obviously it will be related to when the device was bought, the use, the hertz of the screen, etc...

But, taking into account everything mentioned above plus what is not mentioned, in my personal case, which I am not saying is your case or that of others, Nusantara gave me results below other custom roms, surely it is because they do not I flashed well or I didn't do something right, but it's difficult without a recovery provided or suggested and more.

Miui 13.0.9 eee version, gives me a total of even about 12 minutes for each percentage watching videos on YouTube, in a standard way, with a brightness inside the house, a good connection and in a stable way, generally they are usually 8 to 10 , there are times of 6 others of 12.

ArrowOS > LineageOS in terms of battery, they are like that, but it seems to me that ArrowOS is slightly superior, so that the sum of everything is something substantial, but I really have not tested much about this. I can't talk about Pixel Experience because I used it for a very short time and about Nusantara, which I wrote in the comment above.

I know, that if this obviously only affects me and does not affect you or other users, do not take it into account, it is a community project from which you will surely receive very little in compensation, I am not demanding anything, I only inform you why He thinks that the fault lies with the degradation of the phone battery, when it is not, I only know that I follow the installation steps of LineageOS or ArrowOS and I get better results than following the Nusantara steps as best I can and not to mention Miui that exceeds everything mentioned and to mention, since unfortunately it is seen that Mi10t is not a device that matches very well with the roms for whatever reason.

Remind you that we do not have any official recovery, Pitch Black is a recovery that although it was officially supported by our device, I think it has not been updated in a long time, while TWRP has not released any version for the mi10t, so that, when it says that we use a recovery, as a user I wonder what recovery, what version of recovery, etc...

You may believe that I am wrong and that everything is well documented in your guide or on the official Nusantara website, I am not going to enter into debates, I thank you for updating to the new version and I hope that the users who use your Rom will grow and that It works great for everyone, I loved the four times I used it.
 
I am sorry to respond with a disagreement, because it usually generates conflict and it is not my intention. I understand what you say about the battery degrading as it is used, obviously it will be related to when the device was bought, the use, the hertz of the screen, etc...

But, taking into account everything mentioned above plus what is not mentioned, in my personal case, which I am not saying is your case or that of others, Nusantara gave me results below other custom roms, surely it is because they do not I flashed well or I didn't do something right, but it's difficult without a recovery provided or suggested and more.

Miui 13.0.9 eee version, gives me a total of even about 12 minutes for each percentage watching videos on YouTube, in a standard way, with a brightness inside the house, a good connection and in a stable way, generally they are usually 8 to 10 , there are times of 6 others of 12.

ArrowOS > LineageOS in terms of battery, they are like that, but it seems to me that ArrowOS is slightly superior, so that the sum of everything is something substantial, but I really have not tested much about this. I can't talk about Pixel Experience because I used it for a very short time and about Nusantara, which I wrote in the comment above.

I know, that if this obviously only affects me and does not affect you or other users, do not take it into account, it is a community project from which you will surely receive very little in compensation, I am not demanding anything, I only inform you why He thinks that the fault lies with the degradation of the phone battery, when it is not, I only know that I follow the installation steps of LineageOS or ArrowOS and I get better results than following the Nusantara steps as best I can and not to mention Miui that exceeds everything mentioned and to mention, since unfortunately it is seen that Mi10t is not a device that matches very well with the roms for whatever reason.

Remind you that we do not have any official recovery, Pitch Black is a recovery that although it was officially supported by our device, I think it has not been updated in a long time, while TWRP has not released any version for the mi10t, so that, when it says that we use a recovery, as a user I wonder what recovery, what version of recovery, etc...

You may believe that I am wrong and that everything is well documented in your guide or on the official Nusantara website, I am not going to enter into debates, I thank you for updating to the new version and I hope that the users who use your Rom will grow and that It works great for everyone, I loved the four times I used it.
ok understood. It's okay to disagree and i am always open with user feedback. talking about recovery apollo do have an updated recovery TWRP on another discussion platform you might want to check that and yes that's not a high customize like pitchblack recovery it's just usual TWRP but updated to the latest changes of the source, here's https://t.me/notasupportgroup/34937 .
 

panzerpig

Senior Member
Oct 17, 2010
192
38
ASUS ROG Phone II
Anyone experience bad performance in PUBG? I have switched thermal to gaming in battery options but it still doesn't give me 90 fps most of the time. Have tried different kernels but not found a good one. Any tips? With evox and immensity or nexus it was better. But I like nusantara better
 

panzerpig

Senior Member
Oct 17, 2010
192
38
ASUS ROG Phone II
Anyone experience bad performance in PUBG? I have switched thermal to gaming in battery options but it still doesn't give me 90 fps most of the time. Have tried different kernels but not found a good one. Any tips? With evox and immensity or nexus it was better. But I like nusantara better
I am on latest nexus now, performance is better. Gonna try som PUBG matches and we'll see.
 
  • Like
Reactions: goodmeow
no more updates? no nusantara 5.6 and 5.7?
Nusantara v5.7 | Android 13 #test 2

Changelog:
• source upstream april

Notes:
• Android 13
• FW V13.0.8.0 GLOBAL
• GAPPS ONLY
• use #twrp_lilydess for data decryption FBEv2

download at Sourceforge

well actually development still active but i rarely open this XDA...
 

Top Liked Posts

  • There are no posts matching your filters.
  • 2
    Hello
    I'm trying "rising" and I love it, it works great.
    Thank you
    1
  • 12
    acQGb3H.png



    Code:
    /*
    * Your warranty is... still valid?
    *
    * I am not responsible for bricked devices, dead SD cards,
    * thermonuclear war, or you getting fired because the alarm app failed. Please
    * do some research if you have any concerns about features included in this ROM
    * before flashing it! YOU are choosing to make these modifications, and if
    * you point the finger at me for messing up your device, I will laugh at you.
    */
    YKyZ3H3.png


    "Bhinneka Tunggal Ika"


    bP2aN5P.png


    Whats working?
    Wi-Fi
    RIL
    Mobile data
    GPS
    Camera
    Flashlight
    Camcorder
    Bluetooth
    FM radio
    Fingerprint reader
    Face unlock
    NFC
    Lights
    Sound/vibration

    Known issues
    Nothing yet
    You tell me.​


    2dcomNJ.png

    1. First Important Step is to Backup (though depends on you if you wanna be safe or no :p)
    2. Download Nusantara Project Latest ROM Zip
    3. Do clean flash (format device), vendor already included.
    4. flashing steps: Reboot to recovery > flash Firmware > ROM > reboot to system
    5. Flash any add-ons if you want to like Gapps (if Vanilla Build), Magisk, Etc.
    6. Reboot & enjoy!


    IwvGXZQ.png



    171QO6T.png

    Code:
    1. Nusantara ROM is based on?
    Ans. Its based on AOSP
    2. Do we need to flash Gapps?
    Ans. Yes if Nusantara ROM Vanilla does not come with prebuilt gapps.
    3. When will be the next update! Any ETAs?
    Ans. There will be regular updates as and when the team is ready to push a new update. Kindly do not ask for ETAs.
    4. I need this feature/ I found some bugs!
    Ans. Firstly if u find any bug then please check with your add-ons like magisk module, zips, etc u flashed and whether its related or no. Though if your sure that its from rom side then kindly grab a [URL="https://telegra.ph/Logcats-are-important-03-01"]Logcat[/URL] and report to me just mention on reply.



    mnWxvBs.png

    Dirty Unicorns especially @alexcruz
    AOSP
    LineageOS
    MSM Xtended
    Havoc OS
    Evolution X
    AOSiP
    And all the other devs/ROMs

    You can find our all sources down here:
    Source
    Devices & Kernel Sources

    More:
    Our Telegram Channel
    4
    Date : 19/05/2021

    Changelog :
    • Implement CTS hax from Proton AOSP, but gbye magisk.
    • Switch OSS Light
    • Switch dt2w common node, removed apollo parts
    • Added min-max refresh rate control on settings/display also enabled dynamic refreshrate based on content.
    • Improved haptic & vibration pattern
    • Use new Fingerprint service, unlocking should be fast from before.
    • Fixed proximity issue, thx to rami.
    • Kernel inline 4.19-Lolla
    • vendor update from V12.1.2.0.RJDMIXM
    • Selinux Enforcing
    • Firmware use Global V12.1.2.0.RJDMIXM
    3
    I almost never reply to a thread. But it must be said. There is so little available on this device regarding custom ROM's. But this one is EPIC. You can easily use this one as your daily driver. Stable, good battery life, clean, fast... Thank you!
    3
    |==========| Xiaomi Mi 10T/Pro / apollo/pro |==========|


    Date : 15-16/10/2021
    Changelog :
    • abafd8fb3 (HEAD, origin/11) sm8250-common: Chown DT2W node
    • c312147ab sm8250-common: audio: ull: * remove stereo channel mask from voip rx * Revert sm8250-common: audio: correct routing order for voip output
    • 517e3c93f sm8250-common: audio: Add audio policy configuration file with ULL enabled
    • 1cb7ca499 Revert "sm8250-common: audio: correct routing order for voip output"
    • e80e259d1 sm8250-common: remove stereo channel mask from voip rx
    • d14052d98 sm8250-common: audio: fixup 24 bit deep buffer
    • 19240e2ba sm8250-common: audio: disable ULL on audio_policy_configuration_a2dp_offload_disabled_qti.xml
    • bb12e9e62 sm8250-common: audio: Disable ULL mode
    • de79cd550 sm8250-common: audio: Remove effects that won't load
    • 76fe8ce79 sm8250-common: audio: Provide disabled A2DP offload policy variant
    • 4b18c4a5f sm8250-common: audio: correct routing order for voip output
    • 8658c52fe sm8250-common: audio: Add hotword input for hotword mic concurrency
    • be70cccba sm8250-common: audio: Use AOSP A2DP Input config
    • 5ba6232b5 sm8250-common: audio: Fix mic issues in apps like WhatsApp
    • e71808e59 sm8250-common: audio: Switch to 24bit for primary and deep buffer playback
    • 7711729e9 sm8250-common: Switch audio policy to LA.UM.9.12.r1-08300-SMxx50.0
    • e962b9d3a sm8250-common: Drop redundant `usb_audio_policy_configuration.xml` copy
    • 4d9a79dd9 sm8250-common: Split component-overrides to support pure AOSP/QTI BT stack
    • 79abb9a42 sm8250-common: Switch to QTI Bluetooth stack
    • 54ed265d9 [SQUASH] sm8250-common: audio: cleanup qti bt component and their policies Revert "Revert "Revert "sm8250-common: audio: Add audio policy configuration file with ULL enabled"""
    • Kernel 4.19.205-Perf
    • Selinux Enforcing
    • Firmware use Global V12.5.2.0/EEA V12.5.5.0.RJDEUXM
    2
    |==========| Xiaomi Mi 10T/Pro / apollo/pro |==========|

    Date : 21/03/2021

    Changelog :
    • Initial Release
    • Selinux is Permissive
    • Vendor included
    • Firmware use EEA V12.1.2.0.RJDEUXM

    Notes :
    • GApps only

    Credits :
    @SebaUbuntu for base tree
    • @Ramiskyy for the help & hint
    • @veldora_tempes as tester