[OFFICIAL] OxygenOS 10.0.1 (Android Q 10.0) OTA for OnePlus 5 (cheeseburger)

Search This thread
Apr 25, 2017
1,350
2,776
OnePlus 3T
OnePlus 5T
Cheers. I'll give it a go. Hopefully will be able to do it on my phone. Do I need to install the latest TWRP for pie before installing tho? I've been using the codeworkx version for a while now.

Of course yes upgrade to a TWRP compatible with Pie

Is there a need to delete compatibility.zip from this stable Pie full ROM.zip

Yes or you risk to get in troubles like some rooted persons in OpenBeta used to
 

dunjamon

Senior Member
Nov 15, 2010
539
39
Manchester
Ok....managed to install it with no issues. Booted into TWRP, updated to pie TWRP, then installed the full zip file (removed the compatibility.zip from inside first), then magisk, clear cache and boot into system.
 
  • Like
Reactions: sjamie

drjat

Senior Member
Dec 12, 2007
596
142
Warrington
OnePlus 7T
Ok....managed to install it with no issues. Booted into TWRP, updated to pie TWRP, then installed the full zip file (removed the compatibility.zip from inside first), then magisk, clear cache and boot into system.
Awesome. I would request you to share PieTWRP link and if possible please can you upload 'FullROM.zip without the Compatibility.zip'
Addition: Is Blu_Spark TWRP Version 9.85 : twrp-3.2.3-x-bluspark-9.85-treble-cheeseburger.img the correct one for this stable Pie?
Thanks in advance for your help and Merry Christmas
 
Last edited:

#sharath

Senior Member
Jan 22, 2013
463
193
OnePlus 5
Flashed over the 5.1.7 on OP5. In this order:
- removed the compatibility.zip from the OTA
- flashed using OREO TWRP
- installed PIE TWRP before booting into the system
- flashed magisk 17.3 from PIE TWRP
- reboot.

All is fine.

PIE TWRP from here: https://forum.xda-developers.com/on...overy-twrp-3-2-1-0-oreo-oxygenos-5-0-t3725723

I'm getting error 7 when flashing using Oreo TWRP.
E1001: Failed to update system image.

If i flash Pie TWRP first, it doesn't boot to recovery, gets stuck on black screen with blue led.

UPDATE: So the issue was with the ROM zip. I was removing "compatibility.zip" using WinRar on PC. Winrar breaks the signed zip so it fails in TWRP. I redownloaded the full ROM zip again, deleted "compatibility.zip" using ZArchiver app on phone. Now it flashes fine in Oreo TWRP.
 
Last edited:

strongst

Senior Moderator / Developer Committee
Staff member
  • I'm getting error 7 when flashing using Oreo TWRP.
    E1001: Failed to update system image.

    If i flash Pie TWRP first, it doesn't boot to recovery, gets stuck on black screen with blue led.

    UPDATE: So the issue was with the ROM zip. I was removing "compatibility.zip" using WinRar on PC. Winrar breaks the signed zip so it fails in TWRP. I redownloaded the full ROM zip again, deleted "compatibility.zip" using ZArchiver app on phone. Now it flashes fine in Oreo TWRP.
    The rest is installation instructions are the same like on open beta(first post instructions) especially the tools to remove the compatibility.zip
     

    Rodrigo973

    Member
    Dec 26, 2016
    46
    8
    I'm getting error 7 when flashing using Oreo TWRP.
    E1001: Failed to update system image.

    If i flash Pie TWRP first, it doesn't boot to recovery, gets stuck on black screen with blue led.

    UPDATE: So the issue was with the ROM zip. I was removing "compatibility.zip" using WinRar on PC. Winrar breaks the signed zip so it fails in TWRP. I redownloaded the full ROM zip again, deleted "compatibility.zip" using ZArchiver app on phone. Now it flashes fine in Oreo TWRP.

    Can't delete compatibility.zip with ZArchiver and none of the Zip editor's app.

    Edit: I redownloaded the update zip, and there i was able to delete the compatibility.zip, i don't know why.
     
    Last edited:

    darkdragon88

    Senior Member
    Jan 1, 2012
    62
    28
    Flashed over the 5.1.7 on OP5. In this order:
    - removed the compatibility.zip from the OTA
    - flashed using OREO TWRP
    - installed PIE TWRP before booting into the system
    - flashed magisk 17.3 from PIE TWRP
    - reboot.

    All is fine.

    PIE TWRP from here: https://forum.xda-developers.com/on...overy-twrp-3-2-1-0-oreo-oxygenos-5-0-t3725723


    Thanks for the OOS 9.0.0 link.
    As always it is welcomed to have this reminder of how to install on your custom recovery and rooted phone. I had to download the OTA file, unzip it, remove the compatibility.zip file and re-zip it. If anyone is interested I uploaded it so others can easily use it (and do please double-check if the compatibility.zip file is there)
    https://mega.nz/#!3NNggAAB!gz3GZHkVsdEfkXNjWspYGhLeVbwXpdjabwus-xoO038

    BTW I used Magisk 18.0 (https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445) and everything works fine. Remember to backup using TWRP!
    The startup took probably 5 minutes for me and I had to sign in twice for my phone to start -but it all went pretty smoothly! Props to the OnePlus team working through this time to delivery this OTA.
     

    Top Liked Posts

    • There are no posts matching your filters.
    • 223
      1130932-ae72fbc4fae3cafb4a0029107e3892cd.png


      ANNOUNCEMENT
      Hey everyone,

      We are starting to push the incremental roll-out of OxygenOS version 10.0.1 for the OnePlus 5/T devices.

      Changelog:
      Code:
      [B]System:[/B]
      • Fixed the abnormal call recording issue
      • Fixed the de-activated alarm issue when the phone was powered off
      • Updated Android Security Patch to 2020.09
      • Updated GMS package to 2020.08
      
      [B]Full Screen Gestures:[/B]
      • Back gesture from the bottom of the screen is available (OP5T only)
      
      [B]Camera:[/B]
      • Electronic Image Stabilization has been added, bringing you the more stable shooting experience
      Explore what's new on Android 10 here.

      Notes:
      • If you don't have the Community app installed on your device, feel free to download it from here. You can check here for more information on the integrated Feedback tool. Make sure to let us know how you feel about the build here in the thread too, we look forward to reading your feedback.
      • Click here to find out how to take logs on OxygenOS.

      Warning: Please remove your existing screen lock/pin/pattern/password and set it to swipe before starting the update process.

      DOWNLOADS

      Full ROM Zips:
      OxygenOS 10.0.1: Official Link | AndroidFileHost Mirror | Google Drive Mirror
      MD5: 8f41d1cca57e8a91879f4b09088103b4

      Custom Recoveries:
      TWRP by mauronofrio: Official Link
      TWRP by poad42: Official Link
      blu_spark TWRP by eng.stk: Official Link
      Official TWRP by Dees_Troy: Official Link

      Root:
      Magisk: Official Link

      Warning: Do not flash partial update OTAs (under 1 GB) on a modified/rooted device! If you want to use partial OTAs, you must first flash the full OxygenOS zip that it applies to, and then flash the partial OTA from stock recovery. Flashing partial OTAs from TWRP will either fail or soft brick your device. You can return to a usable state by flashing a full zip in recovery.

      FLASHING INSTRUCTIONS

      Download the necessary files from the section above and follow the steps below:

      Note: Dirty flashing is fine if you are running an old OxygenOS version or a ROM based on OxygenOS. If you are, however, coming from a Custom ROM, you must clean flash.

      For Non-Rooted Users with a Locked Bootloader and Stock Recovery:
      • Download the full zip/incremental OTA from the downloads section above and place it in the root of your internal memory
      • Reboot to stock recovery > Shutdown device > Press Volume Down + Power buttons together
      • Select language > Install menu > Install from internal > Select the full zip > Flash
      • After a successful flash > Wipe cache
      • Reboot
      Note: First boot may take some time, so please be patient and wait for it to boot.

      [Dirty Flash] For Users with an Unlocked Bootloader and TWRP Recovery coming from H2OS/OOS:
      • Download the full ROM zip from the downloads section above
      • Transfer the zip to the root of your device's internal storage
      • Only needed if you are using a TWRP that does not ignore the compatibility.zip check: Remove the compatibility.zip from the downloaded full ROM zip with either MiXplorer or Total Commander (not with any other tool!) on your device itself
      • Reboot to TWRP and take a nandroid backup of your existing ROM
      • Flash Magisk Uninstaller (recommended)
      • From the TWRP menu, Wipe > Advanced wipe > Select dalvik-cache and cache > Swipe to wipe
      • From the TWRP menu, Install > Select full ROM zip > Swipe to flash
      • Flash the latest stable Magisk in case you want to root
      • From the TWRP menu, Wipe > Advanced wipe > Select dalvik-cache and cache > Swipe to wipe
      • If you were decrypted earlier, flash xXx No Verity 4.0.zip from here
      • Reboot
      Note: First boot may take some time, so please be patient and wait for it to boot.

      Warning: Dirty flashing (update) can be risky! Remember that if you face issues after dirty flashing, you will have to clean flash.

      [Clean Flash] For Users with an Unlocked Bootloader and TWRP Recovery:
      • Download the full ROM zip from the downloads section above
      • Transfer the zip to the root of your device's internal storage
      • Only needed if you are using a TWRP that does not ignore the compatibility.zip check: Remove the compatibility.zip from the downloaded full ROM zip with either MiXplorer or Total Commander (not with any other tool!) on your device itself
      • Reboot to TWRP and take a nandroid backup of your existing ROM
      • Flash Magisk Uninstaller (recommended)
      • From the TWRP menu, Wipe > Advanced wipe > Select dalvik-cache, cache, system, vendor and data> Swipe to wipe
      • From the TWRP menu, Install > Select full ROM zip (modified one with compatibility.zip removed, in case you're on Oreo or unmodified one, in case you're on Pie) > Swipe to flash
      • Flash the latest stable Magisk in case you want to root
      • From the TWRP menu, Wipe > Advanced wipe > Select dalvik-cache and cache > Swipe to wipe
      • Optional: If you wish to decrypt, format data via TWRP (please note that wiping the data partition, which we did in the 5th step above, is not the same as formatting it) and after that flash xXx No Verity 4.0.zip from here
      • Reboot
      Note: First boot may take some time, so please be patient and wait for it to boot.

      Never Settle.

      XDA:DevDB Information
      [OFFICIAL] OxygenOS Stable for the OnePlus 5, ROM for the OnePlus 5

      Contributors
      Funk Wizard, shadowstep, Some_Random_Username
      ROM OS Version: Android 10
      ROM Kernel: Linux 4.x

      Version Information
      Status: Stable

      Created 2018-09-28
      Last Updated 2020-11-20
      128
      Download Section Moved to OP and is now maintained by the Official Maintainers !!

      Thread Contributors:
      @shadowstep
      @CamoGeko
      @Funk Wizard
      85
      Flashing Instructions moved to OP and now maintained by official Maintainers !

      Thread Contributors:
      @shadowstep
      @CamoGeko
      @Funk Wizard
      28
      Normally I don't comment on stuff like this but the amount of complaining in this thread has caused me to unsubscribe. I'm sorry but how did you guys not expect this coming into the device? You could see OnePlus' track record with the OP3/T (before the past month or so). You're expecting Google-level updates out of a company with probably a tenth of the amount of developers. Would I love to see more timely updates? Absolutely. OnePlus could greatly improve their release schedule by keeping their own development separate from security updates so they can release those updates within a few days of release without introducing regressions but who knows what they plan to do. Yeah, they hyped the camera up and yeah, it has fallen a little flat but I am sure the complaints on their own forum are rolling in hard, where they are actually listening. Plus you all act like Funk Wizard is an official OnePlus employee, expecting him to comment on issues he has no insight on. I'm not directing this as one person, I've been subscribed to this thread since I got the device a month and a half ago and it's been many people so don't think I'm personally attacking you (famous last words).
      27
      [How To] Take Log's on OOS/H2OS | Oneplus Logkit | Bug Reports

      Hi All

      To begin with let me Thank You All for your Active Participation and Feedback on Cheeseburger OOS Updates. We are trying to introduce new features, optimize the software and eliminate the bugs for a better user experience, making OOS/H2OS the Best Optimized OEM Rom :highfive:

      In order to do this we would appreciate regular feedback/bug reports/logs from our users to diagnose issues and rectify them :good:
      I see that although users are able to reproduce various issues, however very few actually go ahead and submit the logs. Without the logs/bug report its very difficult for the ROM Team to reproduce the same issue and hence takes longer time to identify and kill these issues :confused:

      Thus to make it simpler, let me introduce you to the OnePlus Logkit which is an OOS in-built feature to capture logs and does not require root access or any special permissions. If you follow the below you can easily take logs and submit for further testing and it does not matter if you are a stock or rooted user :wink:

      Before we begin :fingers-crossed:

      * Please make a clean flash to check whether the issue still persists before taking the log, most of the times a clean flash will solve your issue so we would appreciate if you do a clean flash before reporting any issue.

      * We would appreciate logs without any mods like SuperSU/Magisk/Magisk Modules, Custom Kernels or any other Visual or SystemUI Mods/Substratum.

      * This method should work on all OOS/H2OS Versions Stable & Beta as and when it comes for OP5 :fingers-crossed:

      * Install the latest User Feedback App and use the same to submit logs/upload and share the link with me so i can forward them to the ROM Team :good:

      Follow the below steps to take logs on OOS/H2OS using Oneplus Logkit and before you start, clear/close all recent apps:

      1. Go to phone dialer app and dial *#800# :good:

      2. Select the first option which says “oneplus Logkit” > Delete history log :good:

      3. Click "advanced" > "save log type", select all these options (Kernel, Main, System, Radio, Event, Tcpdump), then click OK :good:

      3. Go back & select the first option "save log", it would give you a prompt to reboot (reboot if the issue reoccurs easily, otherwise, click “cancel” :good:

      4. Now make the issue reproduce and take a screenshot of the issue wherever possible :fingers-crossed:

      6. Enter Oneplus Logkit, choose “other log info”, click “get bugreport info” once > Wait for 2-3 mins and let the Logs get saved till it shows a toast with "get info done" :good:

      7. Go back, choose save log again to stop the log reporting :good:

      7. Finally, Enter Files > Internal Storage > oem_log, find the folder, zip it to compress and send it to us along with the screenshot :highfive:

      As mentioned above use the User Feedback App to submit the logs or upload and share the link the ROM Team on [email protected] and also share the upload link with me :good:

      I will try my best to follow it up with the team directly :highfive:

      Many Thanks for your support and consideration :highfive:

      PS: Screenshots attached for the entire process for easy understanding :fingers-crossed: