• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!
  • Fill out your device list and let everyone know which phones you have!    Edit Your Device Inventory

[OFFICIAL] OxygenOS 10.0.1 (Android Q 10.0) OTA for OnePlus 5 (cheeseburger)

Search This thread

Kepler_2

New member
Jun 1, 2020
2
0
Are you encrypted or decrypted? If encrypted then FORMAT data(will erase everything) and if decrypted flash no_verity.

I have had the best luck with Blu_Spark TWRP v9.110 which doesn't mean other flavors of TWRP don't work. Here's my clean flashing process:

1. Wipe all partitions (I prefer to format Data when switching between major Android versions)
2. Flash OOS
3. Flash NoVerity4 (I prefer to run decrypted)
4. Flash Magisk
5. Reboot
6. Setup device
7. Enjoy! :good:

I'm encrypted. I didn't try formatting before, so I tried wiping, formatting, installing OOS 10 via the stock recovery (then later with TWRP blu_spark), then flashing magisk, but it still got stuck when booting :(
I figured out I can recover by flashing OOS 10 again with the stock recovery. Flashing OOS 10 (with compatibility checks removed) with TWRP leaves it unable to boot.

I might give NoVerity4 a shot to see if that makes a difference (though I have some doubts). Do you have a link to where I can download it?

I am still curious if there's a way to see if there are any errors during boot to help see what's going wrong.
 

hachamacha

Senior Member
Jun 15, 2010
1,366
751
I am proud to report everything is working on A10 stable and I'm loving it! It is much "smoother" than Pie even though I had zero problems with Pie. It's a difference you can feel.

To avoid issues, I did a super clean flash of A10 stable by formatting data and wiping all partitions including internal storage. Then I flashed A10, NoVerity_v4, Magisk 20.4, reboot, setup Google account then flashed xXx NoLimits and lastly EdXposed Canary YAHFA v0.5.0.0.

All is well and I even pass SafetyNet! :victory:
Hey Jamie, long time. I've been out of the Xposed world. Can you point me to some steps to install the versions mentioned? Cheers. I've got all like you but Xposed.
 

sjamie

Senior Member
Aug 6, 2011
8,530
4,304
  • Like
Reactions: hachamacha

#sharath

Senior Member
Jan 22, 2013
465
194
OnePlus 5
Ftp server in Windows file explorer won't work I tried. It works on any browser. Before it was working fine when I used it on pie in Windows explorer.

It's not working in browser after updating to Android 10. Basically anything related to LAN.

I have this problem too but only in my house's modem/router, I been on other places and WiFi works fine. Another workaround is turn off WiFi, enable airplane mode then disable airplane mode and turn on WiFi. Faster than reboot...



Enviado desde mi ONEPLUS A5000 mediante Tapatalk
View attachment 5031459View attachment 5031461View attachment 5031463

Guess i have to resort to this method. Hoping a future update will magically fix all this, lol.
 

revelbytes

Member
Dec 27, 2018
21
1
Hey everyone!

I'm currently on OxygenOS 9.0.9 rooted with Magisk plus Franco Kernel.

I want to update to Android 10 while also getting rid of root, I wanna go back to 100% stock, locked bootloader, stock recovery and all that.

How can I do that? Should I follow the Clean Flash steps? Since it doesn't mention anything about recovery I assume that flashing a full ROM zip will not overwrite TWRP and thus I have to manually flash the stock recovery.

Where can I find the stock recovery? What are the steps to go 100% stock?

I found this guide, but I'd like to know first if its up to date and it's information can be trusted (specially whether the recovery image linked in it is up to date and usable):

https://oneplus.gadgethacks.com/how-to/unroot-revert-your-oneplus-5-5t-100-stock-0182460/
 

sjamie

Senior Member
Aug 6, 2011
8,530
4,304
Hey everyone!

I'm currently on OxygenOS 9.0.9 rooted with Magisk plus Franco Kernel.

I want to update to Android 10 while also getting rid of root, I wanna go back to 100% stock, locked bootloader, stock recovery and all that.

How can I do that? Should I follow the Clean Flash steps? Since it doesn't mention anything about recovery I assume that flashing a full ROM zip will not overwrite TWRP and thus I have to manually flash the stock recovery.

Where can I find the stock recovery? What are the steps to go 100% stock?

I found this guide, but I'd like to know first if its up to date and it's information can be trusted (specially whether the recovery image linked in it is up to date and usable):

https://oneplus.gadgethacks.com/how-to/unroot-revert-your-oneplus-5-5t-100-stock-0182460/
1. Wipe all partitions (format Data if you want a sparkling clean device/ all data would be erased)
2. Flash desired OOS firmware/ROM
3. Reboot

This process would automatically flash the stock recovery. You would still need to manually lock your bootloader if desired.

I like it!

No problems and I'll check battery usage tomorrow. Thanks. :good:
That AOD contains so many options. It's lovely! :highfive:
 
Last edited:
  • Like
Reactions: hachamacha

elbuenzurdo

Senior Member
May 1, 2015
159
80
I am struggling to find this in settings - bizarre. Where is this 'Network Settings'? Screenshots will help. Thanks

Settings>Wifi & Internet>Wifi>tap on you currently connected wifi network (gear icon)>Advanced>Privacy>Use device MAC
 

Attachments

  • Screenshot_20200602-000403.jpg
    Screenshot_20200602-000403.jpg
    148.4 KB · Views: 848
  • Like
Reactions: drjat

oVeRdOsE.

Senior Member
Sep 19, 2011
870
225
MTL
Vanded works, Adaway works, Dual Speaker mod works, Viper works, boost earpiece don't know that mod can you link me to that? Maybe I can fix it

vanced I manage to make it work, the instruction wasn't clear. V15 does work but with a lot of ads. Then you have to download 3 files. v14 vanced apk, installer.zip, and magisk.plz. All in the same folder, and original youtube app MUST be installed before flash. Then I flash intaller.zip with twrp. Done.

For the ear piece volume boost, I was using FrancoKernel manager with of course the FK kernel. And there was an option to boost the volume since its too low, especially when Im on construction site.

thanks
 
Last edited:

hachamacha

Senior Member
Jun 15, 2010
1,366
751
You are most welcome!
This is my favorite AOD but it does drain the battery a bit. Dev is actively releasing updates to minimize the drain.
https://forum.xda-developers.com/on...xposed-opaodmod-display-lots-options-t4100981

I really like that and the drain isn't bad at all if you adjust it a bit. I haven't yet figured this out but do you know if the AOD time using this mod shows up as screen-on time? I'm not seeing it if so, just more usage of EdX* (still hardly any)
 

revelbytes

Member
Dec 27, 2018
21
1
1. Wipe all partitions (format Data if you want a sparkling clean device/ all data would be erased)
2. Flash desired OOS firmware/ROM
3. Reboot

This process would automatically flash the stock recovery. You would still need to manually lock your bootloader if desired.


That AOD contains so many options. It's lovely! :highfive:

Really? That's all you gotta do?

Excuse my ignorance, it's just that on the main post, where they explain how to Clean Flash there is no part that says you have to reflash TWRP afterwards, which confused me a little, since the steps you mention are basically the same as the ones from that post
 

sjamie

Senior Member
Aug 6, 2011
8,530
4,304
Really? That's all you gotta do?

Excuse my ignorance, it's just that on the main post, where they explain how to Clean Flash there is no part that says you have to reflash TWRP afterwards, which confused me a little, since the steps you mention are basically the same as the ones from that post
When you flash OOS in TWRP, upon reboot it will overwrite TWRP with the stock recovery unless you flash Magisk when prevents TWRP from being overwritten. So flashing OOS in TWRP in essence returns your device to stock. Relock the bootloader as the final step for full stock status.
 
  • Like
Reactions: revelbytes

seanp25

Senior Member
Jun 13, 2012
254
58
Is anyone else seeing strange camera behaviour in warm weather?

The camera module at the back starts clicking/vibrating very rapidly when outside temperature is warm.

It might be related to the OIS problem mentioned in the release notes.

This is on the normal 1x camera. The 2x camera has the old wavey effect problem.

This is on 10.0 stable, no root, no Magisk.
 
Last edited:

d1n0x

Senior Member
Oct 4, 2010
3,996
1,764
Is anyone else seeing strange camera behaviour in warm weather?

The camera module at the back starts clicking/vibrating very rapidly when outside temperature is warm.

It might be related to the OIS problem mentioned in the release notes.

This is on the normal 1x camera. The 2x camera has the old wavey effect problem.

This is on 10.0 stable, no root, no Magisk.
OP5 doesn't have OIS.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 223
    1130932-ae72fbc4fae3cafb4a0029107e3892cd.png


    ANNOUNCEMENT
    Hey everyone,

    We are starting to push the incremental roll-out of OxygenOS version 10.0.1 for the OnePlus 5/T devices.

    Changelog:
    Code:
    [B]System:[/B]
    • Fixed the abnormal call recording issue
    • Fixed the de-activated alarm issue when the phone was powered off
    • Updated Android Security Patch to 2020.09
    • Updated GMS package to 2020.08
    
    [B]Full Screen Gestures:[/B]
    • Back gesture from the bottom of the screen is available (OP5T only)
    
    [B]Camera:[/B]
    • Electronic Image Stabilization has been added, bringing you the more stable shooting experience
    Explore what's new on Android 10 here.

    Notes:
    • If you don't have the Community app installed on your device, feel free to download it from here. You can check here for more information on the integrated Feedback tool. Make sure to let us know how you feel about the build here in the thread too, we look forward to reading your feedback.
    • Click here to find out how to take logs on OxygenOS.

    Warning: Please remove your existing screen lock/pin/pattern/password and set it to swipe before starting the update process.

    DOWNLOADS

    Full ROM Zips:
    OxygenOS 10.0.1: Official Link | AndroidFileHost Mirror | Google Drive Mirror
    MD5: 8f41d1cca57e8a91879f4b09088103b4

    Custom Recoveries:
    TWRP by mauronofrio: Official Link
    TWRP by poad42: Official Link
    blu_spark TWRP by eng.stk: Official Link
    Official TWRP by Dees_Troy: Official Link

    Root:
    Magisk: Official Link

    Warning: Do not flash partial update OTAs (under 1 GB) on a modified/rooted device! If you want to use partial OTAs, you must first flash the full OxygenOS zip that it applies to, and then flash the partial OTA from stock recovery. Flashing partial OTAs from TWRP will either fail or soft brick your device. You can return to a usable state by flashing a full zip in recovery.

    FLASHING INSTRUCTIONS

    Download the necessary files from the section above and follow the steps below:

    Note: Dirty flashing is fine if you are running an old OxygenOS version or a ROM based on OxygenOS. If you are, however, coming from a Custom ROM, you must clean flash.

    For Non-Rooted Users with a Locked Bootloader and Stock Recovery:
    • Download the full zip/incremental OTA from the downloads section above and place it in the root of your internal memory
    • Reboot to stock recovery > Shutdown device > Press Volume Down + Power buttons together
    • Select language > Install menu > Install from internal > Select the full zip > Flash
    • After a successful flash > Wipe cache
    • Reboot
    Note: First boot may take some time, so please be patient and wait for it to boot.

    [Dirty Flash] For Users with an Unlocked Bootloader and TWRP Recovery coming from H2OS/OOS:
    • Download the full ROM zip from the downloads section above
    • Transfer the zip to the root of your device's internal storage
    • Only needed if you are using a TWRP that does not ignore the compatibility.zip check: Remove the compatibility.zip from the downloaded full ROM zip with either MiXplorer or Total Commander (not with any other tool!) on your device itself
    • Reboot to TWRP and take a nandroid backup of your existing ROM
    • Flash Magisk Uninstaller (recommended)
    • From the TWRP menu, Wipe > Advanced wipe > Select dalvik-cache and cache > Swipe to wipe
    • From the TWRP menu, Install > Select full ROM zip > Swipe to flash
    • Flash the latest stable Magisk in case you want to root
    • From the TWRP menu, Wipe > Advanced wipe > Select dalvik-cache and cache > Swipe to wipe
    • If you were decrypted earlier, flash xXx No Verity 4.0.zip from here
    • Reboot
    Note: First boot may take some time, so please be patient and wait for it to boot.

    Warning: Dirty flashing (update) can be risky! Remember that if you face issues after dirty flashing, you will have to clean flash.

    [Clean Flash] For Users with an Unlocked Bootloader and TWRP Recovery:
    • Download the full ROM zip from the downloads section above
    • Transfer the zip to the root of your device's internal storage
    • Only needed if you are using a TWRP that does not ignore the compatibility.zip check: Remove the compatibility.zip from the downloaded full ROM zip with either MiXplorer or Total Commander (not with any other tool!) on your device itself
    • Reboot to TWRP and take a nandroid backup of your existing ROM
    • Flash Magisk Uninstaller (recommended)
    • From the TWRP menu, Wipe > Advanced wipe > Select dalvik-cache, cache, system, vendor and data> Swipe to wipe
    • From the TWRP menu, Install > Select full ROM zip (modified one with compatibility.zip removed, in case you're on Oreo or unmodified one, in case you're on Pie) > Swipe to flash
    • Flash the latest stable Magisk in case you want to root
    • From the TWRP menu, Wipe > Advanced wipe > Select dalvik-cache and cache > Swipe to wipe
    • Optional: If you wish to decrypt, format data via TWRP (please note that wiping the data partition, which we did in the 5th step above, is not the same as formatting it) and after that flash xXx No Verity 4.0.zip from here
    • Reboot
    Note: First boot may take some time, so please be patient and wait for it to boot.

    Never Settle.

    XDA:DevDB Information
    [OFFICIAL] OxygenOS Stable for the OnePlus 5, ROM for the OnePlus 5

    Contributors
    Funk Wizard, shadowstep, Some_Random_Username
    ROM OS Version: Android 10
    ROM Kernel: Linux 4.x

    Version Information
    Status: Stable

    Created 2018-09-28
    Last Updated 2020-11-20
    128
    Download Section Moved to OP and is now maintained by the Official Maintainers !!

    Thread Contributors:
    @shadowstep
    @CamoGeko
    @Funk Wizard
    85
    Flashing Instructions moved to OP and now maintained by official Maintainers !

    Thread Contributors:
    @shadowstep
    @CamoGeko
    @Funk Wizard
    28
    Normally I don't comment on stuff like this but the amount of complaining in this thread has caused me to unsubscribe. I'm sorry but how did you guys not expect this coming into the device? You could see OnePlus' track record with the OP3/T (before the past month or so). You're expecting Google-level updates out of a company with probably a tenth of the amount of developers. Would I love to see more timely updates? Absolutely. OnePlus could greatly improve their release schedule by keeping their own development separate from security updates so they can release those updates within a few days of release without introducing regressions but who knows what they plan to do. Yeah, they hyped the camera up and yeah, it has fallen a little flat but I am sure the complaints on their own forum are rolling in hard, where they are actually listening. Plus you all act like Funk Wizard is an official OnePlus employee, expecting him to comment on issues he has no insight on. I'm not directing this as one person, I've been subscribed to this thread since I got the device a month and a half ago and it's been many people so don't think I'm personally attacking you (famous last words).
    27
    [How To] Take Log's on OOS/H2OS | Oneplus Logkit | Bug Reports

    Hi All

    To begin with let me Thank You All for your Active Participation and Feedback on Cheeseburger OOS Updates. We are trying to introduce new features, optimize the software and eliminate the bugs for a better user experience, making OOS/H2OS the Best Optimized OEM Rom :highfive:

    In order to do this we would appreciate regular feedback/bug reports/logs from our users to diagnose issues and rectify them :good:
    I see that although users are able to reproduce various issues, however very few actually go ahead and submit the logs. Without the logs/bug report its very difficult for the ROM Team to reproduce the same issue and hence takes longer time to identify and kill these issues :confused:

    Thus to make it simpler, let me introduce you to the OnePlus Logkit which is an OOS in-built feature to capture logs and does not require root access or any special permissions. If you follow the below you can easily take logs and submit for further testing and it does not matter if you are a stock or rooted user :wink:

    Before we begin :fingers-crossed:

    * Please make a clean flash to check whether the issue still persists before taking the log, most of the times a clean flash will solve your issue so we would appreciate if you do a clean flash before reporting any issue.

    * We would appreciate logs without any mods like SuperSU/Magisk/Magisk Modules, Custom Kernels or any other Visual or SystemUI Mods/Substratum.

    * This method should work on all OOS/H2OS Versions Stable & Beta as and when it comes for OP5 :fingers-crossed:

    * Install the latest User Feedback App and use the same to submit logs/upload and share the link with me so i can forward them to the ROM Team :good:

    Follow the below steps to take logs on OOS/H2OS using Oneplus Logkit and before you start, clear/close all recent apps:

    1. Go to phone dialer app and dial *#800# :good:

    2. Select the first option which says “oneplus Logkit” > Delete history log :good:

    3. Click "advanced" > "save log type", select all these options (Kernel, Main, System, Radio, Event, Tcpdump), then click OK :good:

    3. Go back & select the first option "save log", it would give you a prompt to reboot (reboot if the issue reoccurs easily, otherwise, click “cancel” :good:

    4. Now make the issue reproduce and take a screenshot of the issue wherever possible :fingers-crossed:

    6. Enter Oneplus Logkit, choose “other log info”, click “get bugreport info” once > Wait for 2-3 mins and let the Logs get saved till it shows a toast with "get info done" :good:

    7. Go back, choose save log again to stop the log reporting :good:

    7. Finally, Enter Files > Internal Storage > oem_log, find the folder, zip it to compress and send it to us along with the screenshot :highfive:

    As mentioned above use the User Feedback App to submit the logs or upload and share the link the ROM Team on [email protected] and also share the upload link with me :good:

    I will try my best to follow it up with the team directly :highfive:

    Many Thanks for your support and consideration :highfive:

    PS: Screenshots attached for the entire process for easy understanding :fingers-crossed: