• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[OFFICIAL] OxygenOS 10.0.1 (Android Q 10.0) OTA for OnePlus 5T (dumpling)

Search This thread

Funk Wizard

Forum Moderator
Staff member
Nov 8, 2014
4,738
17,271
New Delhi
OnePlus 8 Pro
OnePlus 9 Pro
1130932-ae72fbc4fae3cafb4a0029107e3892cd.png


ANNOUNCEMENT
Hey everyone,

We are starting to push the incremental roll-out of OxygenOS version 10.0.1 for the OnePlus 5/T devices.

Changelog:
Code:
[B]System:[/B]
• Fixed the abnormal call recording issue
• Fixed the de-activated alarm issue when the phone was powered off
• Updated Android Security Patch to 2020.09
• Updated GMS package to 2020.08

[B]Full Screen Gestures:[/B]
• Back gesture from the bottom of the screen is available (OP5T only)

[B]Camera:[/B]
• Electronic Image Stabilization has been added, bringing you the more stable shooting experience
Explore what's new on Android 10 here.

Notes:
• If you don't have the Community app installed on your device, feel free to download it from here. You can check here for more information on the integrated Feedback tool. Make sure to let us know how you feel about the build here in the thread too, we look forward to reading your feedback.
• Click here to find out how to take logs on OxygenOS.

Warning: Please remove your existing screen lock/pin/pattern/password and set it to swipe before starting the update process.

DOWNLOADS

Full ROM Zips:
OxygenOS 10.0.1: Official Link | AndroidFileHost Mirror | Google Drive Mirror
MD5: 242e3a4021f0b37c513ac4be935fbea0

Custom Recoveries:
TWRP by mauronofrio: Official Link
TWRP by poad42: Official Link
blu_spark TWRP by eng.stk: Official Link
Official TWRP by Dees_Troy: Official Link

Root:
Magisk: Official Link

Warning: Do not flash partial update OTAs (under 1 GB) on a modified/rooted device! If you want to use partial OTAs, you must first flash the full OxygenOS zip that it applies to, and then flash the partial OTA from stock recovery. Flashing partial OTAs from TWRP will either fail or soft brick your device. You can return to a usable state by flashing a full zip in recovery.

FLASHING INSTRUCTIONS

Download the necessary files from the section above and follow the steps below:

Note: Dirty flashing is fine if you are running an old OxygenOS version or a ROM based on OxygenOS. If you are, however, coming from a Custom ROM, you must clean flash.

For Non-Rooted Users with a Locked Bootloader and Stock Recovery:
  • Download the full zip/incremental OTA from the downloads section above and place it in the root of your internal memory
  • Reboot to stock recovery > Shutdown device > Press Volume Down + Power buttons together
  • Select language > Install menu > Install from internal > Select the full zip > Flash
  • After a successful flash > Wipe cache
  • Reboot
Note: First boot may take some time, so please be patient and wait for it to boot.

[Dirty Flash] For Users with an Unlocked Bootloader and TWRP Recovery coming from H2OS/OOS:
  • Download the full ROM zip from the downloads section above
  • Transfer the zip to the root of your device's internal storage
  • Only needed if you are using a TWRP that does not ignore the compatibility.zip check: Remove the compatibility.zip from the downloaded full ROM zip with either MiXplorer or Total Commander (not with any other tool!) on your device itself
  • Reboot to TWRP and take a nandroid backup of your existing ROM
  • Flash Magisk Uninstaller (recommended)
  • From the TWRP menu, Wipe > Advanced wipe > Select dalvik-cache and cache > Swipe to wipe
  • From the TWRP menu, Install > Select full ROM zip > Swipe to flash
  • Flash the latest stable Magisk in case you want to root
  • From the TWRP menu, Wipe > Advanced wipe > Select dalvik-cache and cache > Swipe to wipe
  • If you were decrypted earlier, flash xXx No Verity 4.0.zip from here
  • Reboot
Note: First boot may take some time, so please be patient and wait for it to boot.

Warning: Dirty flashing (update) can be risky! Remember that if you face issues after dirty flashing, you will have to clean flash.

[Clean Flash] For Users with an Unlocked Bootloader and TWRP Recovery:
  • Download the full ROM zip from the downloads section above
  • Transfer the zip to the root of your device's internal storage
  • Only needed if you are using a TWRP that does not ignore the compatibility.zip check: Remove the compatibility.zip from the downloaded full ROM zip with either MiXplorer or Total Commander (not with any other tool!) on your device itself
  • Reboot to TWRP and take a nandroid backup of your existing ROM
  • Flash Magisk Uninstaller (recommended)
  • From the TWRP menu, Wipe > Advanced wipe > Select dalvik-cache, cache, system, vendor and data> Swipe to wipe
  • From the TWRP menu, Install > Select full ROM zip (modified one with compatibility.zip removed, in case you're on Oreo or unmodified one, in case you're on Pie) > Swipe to flash
  • Flash the latest stable Magisk in case you want to root
  • From the TWRP menu, Wipe > Advanced wipe > Select dalvik-cache and cache > Swipe to wipe
  • Optional: If you wish to decrypt, format data via TWRP (please note that wiping the data partition, which we did in the 5th step above, is not the same as formatting it) and after that flash xXx No Verity 4.0.zip from here
  • Reboot
Note: First boot may take some time, so please be patient and wait for it to boot.

Never Settle.

XDA:DevDB Information
[OFFICIAL] OxygenOS Stable for OnePlus 5T (dumpling), ROM for the OnePlus 5T

Contributors
Funk Wizard, shadowstep, Some_Random_Username
ROM OS Version: Android 10
ROM Kernel: Linux 4.x

Version Information
Status: Stable

Created 2018-10-08
Last Updated 2020-11-20
 
Last edited:

Funk Wizard

Forum Moderator
Staff member
Nov 8, 2014
4,738
17,271
New Delhi
OnePlus 8 Pro
OnePlus 9 Pro
Thanks, works. Am unlocked and with TWRP installed. Had to use this method.
Woh ... Sup buddy, Glad to greet you here with 5T. I still remember and appreciate your contribution over the the 3/3T unified TWRP thread. Thank you once again for your active contribution and support towards oneplus devices and i hope to see you around :highfive:
 

mad-murdock

Retired Recognized Developer
Oct 11, 2010
2,373
1,670
Detmold
Woh ... Sup buddy, Glad to greet you here with 5T. I still remember and appreciate your contribution over the the 3/3T unified TWRP thread. Thank you once again for your active contribution and support towards oneplus devices and i hope to see you around :highfive:

Hey mate, nice you remember me. With a new OnePlus device at my hands I sure stay around for a month or two before I lose interest in Forums once again.
 

Pfeffernuss

Senior Member
Jun 30, 2009
5,188
1,957
Wassenaar
  • Like
Reactions: Flint2

laupuy

Senior Member
Jul 26, 2015
1,854
2,058
dans tes 22
OxygenOS 4.7.4 OTA for the OnePlus 5T is out!

Source : https://forums.oneplus.net/threads/oxygenos-4-7-4-ota-for-the-oneplus-5t.709071/

Changelog :
Camera :
Optimized UI of Camera
Improvements for photo quality
System :
Optimizations for audio from speaker and earphones
Optimizations for face unlock
Optimizations for vibration
Wi-Fi battery usage optimization
Improved stability of fingerprint and GPS
General bug fixes and system stability improvements
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 148
    1130932-ae72fbc4fae3cafb4a0029107e3892cd.png


    ANNOUNCEMENT
    Hey everyone,

    We are starting to push the incremental roll-out of OxygenOS version 10.0.1 for the OnePlus 5/T devices.

    Changelog:
    Code:
    [B]System:[/B]
    • Fixed the abnormal call recording issue
    • Fixed the de-activated alarm issue when the phone was powered off
    • Updated Android Security Patch to 2020.09
    • Updated GMS package to 2020.08
    
    [B]Full Screen Gestures:[/B]
    • Back gesture from the bottom of the screen is available (OP5T only)
    
    [B]Camera:[/B]
    • Electronic Image Stabilization has been added, bringing you the more stable shooting experience
    Explore what's new on Android 10 here.

    Notes:
    • If you don't have the Community app installed on your device, feel free to download it from here. You can check here for more information on the integrated Feedback tool. Make sure to let us know how you feel about the build here in the thread too, we look forward to reading your feedback.
    • Click here to find out how to take logs on OxygenOS.

    Warning: Please remove your existing screen lock/pin/pattern/password and set it to swipe before starting the update process.

    DOWNLOADS

    Full ROM Zips:
    OxygenOS 10.0.1: Official Link | AndroidFileHost Mirror | Google Drive Mirror
    MD5: 242e3a4021f0b37c513ac4be935fbea0

    Custom Recoveries:
    TWRP by mauronofrio: Official Link
    TWRP by poad42: Official Link
    blu_spark TWRP by eng.stk: Official Link
    Official TWRP by Dees_Troy: Official Link

    Root:
    Magisk: Official Link

    Warning: Do not flash partial update OTAs (under 1 GB) on a modified/rooted device! If you want to use partial OTAs, you must first flash the full OxygenOS zip that it applies to, and then flash the partial OTA from stock recovery. Flashing partial OTAs from TWRP will either fail or soft brick your device. You can return to a usable state by flashing a full zip in recovery.

    FLASHING INSTRUCTIONS

    Download the necessary files from the section above and follow the steps below:

    Note: Dirty flashing is fine if you are running an old OxygenOS version or a ROM based on OxygenOS. If you are, however, coming from a Custom ROM, you must clean flash.

    For Non-Rooted Users with a Locked Bootloader and Stock Recovery:
    • Download the full zip/incremental OTA from the downloads section above and place it in the root of your internal memory
    • Reboot to stock recovery > Shutdown device > Press Volume Down + Power buttons together
    • Select language > Install menu > Install from internal > Select the full zip > Flash
    • After a successful flash > Wipe cache
    • Reboot
    Note: First boot may take some time, so please be patient and wait for it to boot.

    [Dirty Flash] For Users with an Unlocked Bootloader and TWRP Recovery coming from H2OS/OOS:
    • Download the full ROM zip from the downloads section above
    • Transfer the zip to the root of your device's internal storage
    • Only needed if you are using a TWRP that does not ignore the compatibility.zip check: Remove the compatibility.zip from the downloaded full ROM zip with either MiXplorer or Total Commander (not with any other tool!) on your device itself
    • Reboot to TWRP and take a nandroid backup of your existing ROM
    • Flash Magisk Uninstaller (recommended)
    • From the TWRP menu, Wipe > Advanced wipe > Select dalvik-cache and cache > Swipe to wipe
    • From the TWRP menu, Install > Select full ROM zip > Swipe to flash
    • Flash the latest stable Magisk in case you want to root
    • From the TWRP menu, Wipe > Advanced wipe > Select dalvik-cache and cache > Swipe to wipe
    • If you were decrypted earlier, flash xXx No Verity 4.0.zip from here
    • Reboot
    Note: First boot may take some time, so please be patient and wait for it to boot.

    Warning: Dirty flashing (update) can be risky! Remember that if you face issues after dirty flashing, you will have to clean flash.

    [Clean Flash] For Users with an Unlocked Bootloader and TWRP Recovery:
    • Download the full ROM zip from the downloads section above
    • Transfer the zip to the root of your device's internal storage
    • Only needed if you are using a TWRP that does not ignore the compatibility.zip check: Remove the compatibility.zip from the downloaded full ROM zip with either MiXplorer or Total Commander (not with any other tool!) on your device itself
    • Reboot to TWRP and take a nandroid backup of your existing ROM
    • Flash Magisk Uninstaller (recommended)
    • From the TWRP menu, Wipe > Advanced wipe > Select dalvik-cache, cache, system, vendor and data> Swipe to wipe
    • From the TWRP menu, Install > Select full ROM zip (modified one with compatibility.zip removed, in case you're on Oreo or unmodified one, in case you're on Pie) > Swipe to flash
    • Flash the latest stable Magisk in case you want to root
    • From the TWRP menu, Wipe > Advanced wipe > Select dalvik-cache and cache > Swipe to wipe
    • Optional: If you wish to decrypt, format data via TWRP (please note that wiping the data partition, which we did in the 5th step above, is not the same as formatting it) and after that flash xXx No Verity 4.0.zip from here
    • Reboot
    Note: First boot may take some time, so please be patient and wait for it to boot.

    Never Settle.

    XDA:DevDB Information
    [OFFICIAL] OxygenOS Stable for OnePlus 5T (dumpling), ROM for the OnePlus 5T

    Contributors
    Funk Wizard, shadowstep, Some_Random_Username
    ROM OS Version: Android 10
    ROM Kernel: Linux 4.x

    Version Information
    Status: Stable

    Created 2018-10-08
    Last Updated 2020-11-20
    72
    Download Section moved to OP and Thread now maintained by:

    Thread Contributors:
    @shadowstep
    @Funk Wizard
    50
    Flashing Instructions moved to OP and thread now maintained by:

    Thread Contributors:
    @shadowstep
    @Funk Wizard
    37
    Confirmed: New OxygenOS features launched with OnePlus 7 Pro (software based, such as Fnatic Mode, Zen Mode, Screen Recorder, Quick Reply in Landscape, DC Dimming, and RAM Boost) will be making their way to the OnePlus 5/5T/6/6T too.

    Bonus Confirmation: Android Q will also make its way to OnePlus 5/5T.

    (Source: OnePlus Forums)
    36
    Sick of OnePlus changelogs, came back for more OTA analysis ! I'll try to do it everytime a new OTA is available !

    How to interpret :
    Small change ==> 5 lines of code or less were modified
    Updated ==> File/App completely different or rebuild

    4.7.4 ==> 4.7.5
    - Small change libmmcamera2_q3a_core.so (camera librairies)
    - Small change in libstagefright_soft_avcdec.so (Used for hardware h264 decoding)

    - Updated libstagefright_soft_avcenc.so (Used for hardware h264 encoding)
    - Updated libwebrtc_audio_preprocessing.so (Related to audio processing)
    - Updated OPDeviceManager
    - Updated OnePlusCamera

    - Kernel updated from 4.4-G1712062242 to 4.4-G1712122320
    - Updated firmware files : a540_zap, ipa_fws


    Here's the comparison between 4.7.2 & 4.7.4
    4.7.2 ==> 4.7.4 :
    - Updated camera libraries (HAL & config files)
    - Updated video/media libraries
    - Updated fw_synaptics_17801.img (Touch Panel firmware)
    - Updated fingerprint libraries
    - Updated android framework
    - Small change in qca_cld3_wlan.ko (Wi-Fi driver)
    - In WCNSS_qcom_cfg.ini, g_enable_packet_filter_bitmap=2 ---> g_enable_packet_filter_bitmap=3 (wi-fi optimization, not sure if that makes a difference)
    - In build.prop : ro.com.google.gmsversion=7.1_r6 --> ro.com.google.gmsversion=7.1_r7 (Google Mobile Services)
    - Updated GMSCore.apk (Google Mobile Services)
    - Small change in APN Config files (added iD internet virtual apn / Change iD internet to ipv4v6)
    - Updated firmware files : a540_zap, ipa_fws
    - Recovery updated
    - Kernel updated from 4.4-G1711152324 to 4.4-G1712062242
    The rest is minor, all Google Apps updated also.