[OFFICIAL] OxygenOS 5.0 (Android O) OTA for the OnePlus 3T

[Funk Wizard]

Hello everyone!

We are pushing out the incremental roll-out of OxygenOS 5.0, our first official Android O OTA update for the OnePlus 3 and 3T. Here are some of the highlights of this build:

System
Update to Android O (8.0)
Added Parallel Apps
Added Picture in Picture
Added Auto-fill
Added Smart text selection
New Quick Settings design
Updated security patch to September

Launcher
Added notification dots
New app folder design
Now able to upload photos directly to Shot on OnePlus

For those who were on previous versions for OnePlus 3 and 3T, we appreciate your active feedback and attempts to reach out to us. With your help, we have been able to better optimize and improve several key areas. Thank you for your patience and as always, we look forward to hearing your continued feedback in the bug reporting forum here: https://forums.oneplus.net/feedback/.

As always, this OTA will be incremental. The OTA will reach a small percentage of users today, and we'll begin a broader rollout in a few days.

Your feedback is appreciated. We may not always be able to respond to every comment in the forums, but please be assured that we take your comments and feedback seriously. Hope you enjoy and let us know how you feel about the update in the comments below.

Never Settle :fingers-crossed:

>>>> Confused on How to take logs, look here

 

[Funk Wizard]

Downloads:

OOS 5.0 Full Zip: Official

Unified TWRP By @eng.stk

SuperSU | Magisk

Warning: Do not flash partial update OTAs (under 1 GB) on a modified device! If you want to use partial OTAs, you must first flash a full OTA that it applies to, and then flash the partial OTA from stock recovery. Flashing partial OTAs from TWRP will either fail or soft brick your device. You can return to a usable state by flashing one of the above full OTA zips in recovery.

 

[Funk Wizard]

Installation Methods

Before we start:-

This method is only for the OnePlus 3T.

Follow the steps correctly otherwise you may brick your device. I am not responsible for any damage to your device, please ensure that your device is at least 60% charged to prevent the accidental shutdown in-between the update process.

Download the necessary files from the post above and follow as below

PS: Dirty flash is fine if you are running a previous OOS version or any rom based on OOS, else if you come from a custom rom Clean Flash is recommended.

********************* For Stock Non Rooted Users with Stock Recovery *****************

1. Download the appropriate OTA from above link and place it in the root folder.

2. Navigate to Settings > System Updates > Settings Icon > Local Upgrade & Select the OTA File

3. Once selected system would prompt upgrade now

4. Select upgrade now and system would reboot in stock recovery and flash the OTA

5. The installer would itself flash the OTA and reboot the device.

The Device will reboot and your OnePlus 3T is now running on the latest OxygenOS 5.0 firmware & OS based on 8.0 Oreo.

PS: The first boot may take some time so keep calm and wait for it to boot.
* After flash is successful go back to recovery and a wipe of cache is recommended.
* If in any case flash is unsuccessful the system would prompt you to download the full 1.4GB zip.
* Download that and follow the same process as above.

************************ For Rooted Users with TWRP Recovery ************************

Download the required files from Post 2

Once you have downloaded all the required files on you device, please follow as below :good:

1. Update TWRP to the ones provided above by flashing the downloaded image :good:

2. Reboot Recovery and Take a Nandroid of your existing ROM :good:
(Note: Nandroid from 3.0.4-1 cant be restored on older version or and visa-versa)

3. Wipe > Advance Wipe > Select Dalvik & Cache > Swipe to Wipe :good:

4. Install Menu > Select OOS 5.0 Full Rom Zip > Swipe to Flash :good:

5. Flash the provided SuperSU/Magisk to maintain root (Optional)

6. Wipe Dalvik & Cache

7. Reboot System and Enjoy OxygenOS 5.0 Firmware & Latest OOS based on 8.0 Oreo :fingers-crossed:

The first boot may take some time as the system would boot twice due to flash of supersu so keep calm :fingers-crossed:

PS: Do not flash partial update OTAs (under 1 GB) on a modified device! If you want to use partial OTAs, you must first flash a full OTA that it applies to, and then flash the partial OTA from stock recovery. Flashing partial OTAs from TWRP will either fail or soft brick your device. You can return to a usable state by flashing one of the above full OTA zips in recovery.

 

[PENKO956]

here we go! nice :good:

 

[Seansmit17]

Yeah got the ota notification 20 mins ago

 

[boind]

Is the alert slider now fixed?

 

[Funk Wizard]

Yeah got the ota notification 20 mins ago

None here yet, could u upload the OTA zip?

 

[eng.stk]

OOS 3.5.3 to 3.5.4 incremental OTA @Funk Wizard

OnePlus3TOxygen_28_OTA_027-029_patch_1612131737_17e7161d2b234949.zip

 

[Funk Wizard]

OOS 3.5.4 OTA @Funk Wizard

OnePlus3TOxygen_28_OTA_027-029_patch_1612131737_17e7161d2b234949.zip

Thanks buddy :good:

 

[bloodhound42]

So did the T mobile issue is fixed now. Please let me know as I am on ATT and soon porting to T mobile

 

[jemeljsh]

OOS 3.5.4 OTA @Funk Wizard

OnePlus3TOxygen_28_OTA_027-029_patch_1612131737_17e7161d2b234949.zip

OTA's wont install unless you have stock recovery, right?

Tried to install it through TWRP directly and the install ended with an ERROR: 7. Same thing happened while installing it from Settings -> System update -> Local upgrade, since it brings you to the same recovery/TWRP which ends up with ERROR 7 also

I guess in order to install this update and get back TWRP and ROOT, I have to:
1. flash stock recovery;
2. boot into system;
3. install this OTA update from Settings -> System update -> Local upgrade;
4. re-flash TWRP while in fastboot through ADB;
5. flash latest superSU in TWRP.

 

[Funk Wizard]

OTA's wont install unless you have stock recovery, right?

Tried to install it through TWRP directly and the install ended with an ERROR: 7. Same thing happened while installing it from Settings -> System update -> Local upgrade, since it brings you to the same recovery/TWRP which ends up with ERROR 7 also

I guess in order to install this update and get back TWRP and ROOT, I have to:
1. flash stock recovery;
2. boot into system;
3. install this OTA update from Settings -> System update -> Local upgrade;
4. re-flash TWRP while in fastboot through ADB;
5. flash latest superSU in TWRP.

I have successfully installed the OTA from TWRP and updated the installation process on the OP

 

[masi0]

I don't see update yet. Is it normal?

Wysłane z mojego SM-T815 przy użyciu Tapatalka

 

[jemeljsh]

I have successfully installed the OTA from TWRP and updated the installation process on the OP

Well, for some reason I get that Error 7. Even with stock recovery the install fails. I have no idea why..

Edit. Its (reason for Error 7) gotta be the root.

 

[Funk Wizard]

Well, for some reason I get that Error 7. Even with stock recovery the install fails. I have no idea why..

Edit. Its (reason for Error 7) gotta be the root.

indeed the reason for error 7 is root.
You have to overwrite the system partition by flashing full 3.5.3 full rom followed by 3.5.4 OTA or just dirty flash 3.5.4 full zip.
Both Installation methods are mentioned on the OP with download links.

 

[Funk Wizard]

I don't see update yet. Is it normal?

Wysłane z mojego SM-T815 przy użyciu Tapatalka

The roll-out is incremental, you can find the zips on the OP if you want to flash it manually along with the instructions already tested by me.

 

[masi0]

Is there a method of flashing this zip on stock unrooted rom?

Wysłane z mojego SM-T815 przy użyciu Tapatalka

 

[liver20]

Do you recommend? Better in something that 3.5.3?

Enviado desde mi ONEPLUS A3003 mediante Tapatalk

 

[freakie07]

Does Flashfire work with OnePlus 3T? Did anyone try it?

 

[Funk Wizard]

Is there a method of flashing this zip on stock unrooted rom?

Wysłane z mojego SM-T815 przy użyciu Tapatalka

Yes, i have modified the update process for you, look here

Do you recommend? Better in something that 3.5.3?

Enviado desde mi ONEPLUS A3003 mediante Tapatalk

I always recommend to stay on the latest if official, you can check the changelog in the OP