• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!
  • Fill out your device list and let everyone know which phones you have!    Edit Your Device Inventory

[OFFICIAL] [Q] LineageOS 17.1

Search This thread

hasfran

New member
Jun 3, 2020
1
0
wipe data/system/cache/dalvik
format data
install rom
install gapps
FORMAT data again
reboot
go through all the google nonsense (I skip the pin/passcode/fingerprint and do it later)
reboot TWRP
flash magisk
VOILA

Just switch to the latest TWRP build, wipe data and cache (also system and vendor if you want but that's optional), flash lineage + opengapps, format /data and reboot.

Thanks!!!
 

cshif

New member
May 18, 2020
3
0
I want all user data and the internal memory to be encrypted and the need to enter the password at startup.
I can't get the device's encryption to work. After I install the rom it shows me 'phone not encrypted', after starting the process it 'hangs' at 00:00 time remaining for several hours, although very little data is stored. An abort by reboot ends with an indication of unsuccessful encryption.
I wiped dalvik, cache, system, data and the internal storage; then I formatted data; installed the ROM; formatted data again; booted device; assigned password and started the encryption. (OrangeFox Recovery)
Even if I skip reformatting data after installation, or if I repeat the process. Everything works except the encryption. I have the same problem with other roms that would use FBE.
 

OrbOutrider

Member
Jun 3, 2020
5
0
After flashing Magisk, I can't unlock the phone anymore. Uninstalling Magisk doesn't help, either.

EDIT: Even without Magisk, the mere restarting of my phone causes the same bug. Unlocking my phone leads to a black screen then it locks itself again.
 
Last edited:

DD3Boh

Recognized Developer
Feb 16, 2017
305
1,335
Voghera
I want all user data and the internal memory to be encrypted and the need to enter the password at startup.
I can't get the device's encryption to work. After I install the rom it shows me 'phone not encrypted', after starting the process it 'hangs' at 00:00 time remaining for several hours, although very little data is stored. An abort by reboot ends with an indication of unsuccessful encryption.
I wiped dalvik, cache, system, data and the internal storage; then I formatted data; installed the ROM; formatted data again; booted device; assigned password and started the encryption. (OrangeFox Recovery)
Even if I skip reformatting data after installation, or if I repeat the process. Everything works except the encryption. I have the same problem with other roms that would use FBE.

No support for OrangeFox recovery is provided here, since as far as I know it disables force encryption by default.
Hence, switch to TWRP, format /data with it and reboot to LineageOS
 
  • Like
Reactions: wgsaqmwv

OrbOutrider

Member
Jun 3, 2020
5
0
Any help? I tried to reinstall it again. I made sure that it was a clean install yet I can't unlock my phone at all.

EDIT: What Magisk version have people been using with the official nightly builds? The latest one wont work. It caused this unlock bug I've experienced.
 
Last edited:

idcom

Senior Member
Hi,

I have a small intermittent problem.

If I boot with my USB headset plugged in it isn't recognised. Even if I unplug and plug it in again.

If I boot with it not fitted and let the phone fully boot. It is recognised when I plug it in and works like it should. Normally wouldn't notice but using the headset a lot at the moment.

Otherwise this is an excellent rom.
 

ushiyama

Senior Member
Any help? I tried to reinstall it again. I made sure that it was a clean install yet I can't unlock my phone at all.

EDIT: What Magisk version have people been using with the official nightly builds? The latest one wont work. It caused this unlock bug I've experienced.

apk: 20.4
manager: 7.5.1

No unlock bug here, i am on 20200602 build. Magisk hide working on all apps i had it settled for.
 
  • Like
Reactions: privacyypolicyy
Mar 26, 2020
40
2
i noticed that with every update error messages popups about magisk and addon.d file but it doesnt stop it so after the update i have to reflash magisk and everything is ok
not terrible, kinda annoying

i find out about that flash-after-update script
https://www.reddit.com/r/LineageOS/comments/6fsf9e/question_about_los_root_supersu_and_magisk/

will it work?


EDIT:

that twrp 3.3.1-1 update ,,, fix all the problems decryption, backup, restore, magisk
big ups to dd3boh :victory:
 
Last edited:

OrbOutrider

Member
Jun 3, 2020
5
0
apk: 20.4
manager: 7.5.1

No unlock bug here, i am on 20200602 build. Magisk hide working on all apps i had it settled for.

Thanks. After some research, I found that deleting the locksetting files on the system folder allowed me to unlock the phone. The problem however is that it now says Phone is starting... and it's stuck there. I love the rom so much so I hope I'll fix this eventually.
 
Last edited:

ushiyama

Senior Member
What is this information?
 

Attachments

  • Screenshot_20200604-081248_Trebuchet_2.jpg
    Screenshot_20200604-081248_Trebuchet_2.jpg
    120.4 KB · Views: 236

niyas90

Senior Member
Mar 12, 2013
411
154
Xiaomi Redmi Note 5 Pro
Thanks. After some research, I found that deleting the locksetting files on the system folder allowed me to unlock the phone. The problem however is that it now says Phone is starting... and it's stuck there. I love the rom so much so I hope I'll fix this eventually.
Use format data (not wiping) using twrp. it will remove all encryption thus password. Just wiping data is not enough.
 
  • Like
Reactions: OrbOutrider

osrdek

Member
Aug 8, 2013
25
1
I don't get any SMS unless I unlock my phone. Then I get all the messages that were sent to me after I unlocked my phone for the last time. No battery optimization is enabled for the SMS app.

Is this a bug, or do I have to change some settings?
 

Rishbahsgr

Member
Feb 22, 2020
31
4
24
New Delhi
Yes, f2fs support isn't there (for /data) because of FBE.

Bro i wanna know that if f2fs even helps our device to perform faster or not
i have been using f2fs for years now and what i have observed that f2fs increases the write speed because of which apps installs faster 2X faster in most devices and decreases the read speed for about 15-20% does it impacts the day to day multitasking and scrolling of apps like facebook snapchat and Instagram ?
 

bigas

Senior Member
Mar 5, 2011
117
37
Hi. I am facing the exact same issue. I went to Format/data and booted to system. That initiated the LineageOS logo after booting up, but it again went to TWRP.



Are others experiencing this same issue?
For everyone who had this issue, I had the same problem and I solved it doing the following:

- Boot TWRP
- Wipe > Format > Reboot Recovery
- Wipe > Advanced > checked everything that is not external sdcard
- back to install - select from and gapps if needed
- wipe dalvik
- reboot

Make sure you're on the latest TWRP.

Enviado de meu Redmi Note 6 Pro usando o Tapatalk
 
  • Like
Reactions: framcruz

Top Liked Posts

  • There are no posts matching your filters.
  • 38
    2okPze5.png

    Code:
    /*
     * Your warranty is now void.
     *
     * I am not responsible for bricked devices, dead SD cards,
     * thermonuclear war, or you getting fired because the alarm app failed. Please
     * do some research if you have any concerns about features included in this ROM
     * before flashing it! YOU are choosing to make these modifications, and if
     * you point the finger at me for messing up your device, I will laugh at you.
     */

    LineageOS is a free, community built, aftermarket firmware distribution of Android 10, which is designed to increase performance and reliability over stock Android for your device.

    LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.

    All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.

    Bugs :
    • You tell me

    Instructions :
    • Download the latest build
    • Reboot to recovery
    • Flash the latest build
    • Reboot

    Downloads :

    Notes :
    • Only clean installation please
    • Bug Report without logs means nothing
    • No stable gapps package is available as of now for Android 10
    • Encryption works and it's forced as FBE. This means you need to format your /data partition if you are unencrypted or encrypted with FDE, right before booting into the ROM.
    • SafetyNet doesn't pass as of now (Blame Google for that) and I'm not going to include any hack to make it pass
    • Magisk works but no support for it is officially provided

    Reporting Bugs :
    • DO NOT Report bugs if you installed Xposed or weird magisk modules
    • Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
    • If it is a random reboot, grab /sys/fs/pstore/console-ramoops and /sys/fs/pstore/dmesg-ramoops-0. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)

    Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.

    Sources :

    XDA:DevDB Information
    LineageOS 17.1 for tulip, ROM for the Xiaomi Redmi Note 6 Pro

    Contributors
    DD3Boh, erfanoabdi, arytonex
    Source Code: [url]https://github.com/LineageOS[/URL]

    ROM OS Version: Android 10
    ROM Kernel: Linux 4.x
    Based On: AOSP

    Version Information
    Status: Stable

    Created 2019-09-14
    Last Updated 2020-01-04
    30
    lineage-17.0-20190914-UNOFFICIAL-tulip
    • Initial release

    lineage-17.0-20190915-UNOFFICIAL-tulip
    • Fixed device not booting on the very first boot. Yet the first boot might have some issues, if it does just force a reboot to fix

    lineage-17.0-20190923-UNOFFICIAL-twolip
    • Fixed calling audio
    • Fixed bluetooth audio
    • Fixed DRM (together with Chrome frequent crashes)
    • Fixed thermal crashing
    • Fixed goodix fingerprint support
    • Fixed VoLTE
    • Fixed hotspot
    • Fixed SDcard
    • Added f2fs support
    • Kernel rebased on the latest Q CAF tag for sdm660
    • Kernel built with clang 9.0.3 as expected in Q
    • Device renaming from tulip to twolip, details here

    lineage-17.0-20191126-UNOFFICIAL-twolip
    The changes in between the two builds are way too many to list them all, but let's try to sum things up a little bit.
    • 5ghz hotspot fixed
    • Kernel rebased on the latest CAF tag with qcacld update too (LA.UM.8.2.r1-04800-sdm660.0)
    • Blobs updated with CAF Q blobs
    • Radio blobs updated to the very latest Pie caf tag
    • WiFi display fixed
    • Manual network provisioning fixed
    • A lot of platform side updates with new features re-implemented
    • Added CarrierConfig for mobile network provider customized options
    • DRM fixed, so no more Chrome crashes
    • Fixed charging status not being correctly reported
    • Misc fixes (both device and platform side)

    lineage-17.1-20200104-UNOFFICIAL-twolip
    Clean flash is recommended, but if you don't want to do so gapps and magisk need to be reflashed
    • Encryption fixed
    • Selinux enforcing
    • FM radio fixed
    • Aptx fixed
    • Headphones without jack fixed
    • Headphones during call fixed
    • Kernel and qcacld updated to latest CAF tag (LA.UM.8.2.r1-05100-sdm660.0)
    • Lineage source update to 17.1 (rebased on aosp r18)
    • Lineage sources update with new features re-implemented

    lineage-17.1-20200104-NIGHTLY-twolip
    • This is the first OFFICIAL build of LineageOS for twolip
    • The encryption method is now FBE so if you are currently encrypted with FDE or decrypted, you need to format /data
    • The only official supported recoveries are TWRP (latest build) and lineage recovery.
    16
    Hi everyone... it's nice to finally write something here again haha.
    After two whole months, finally a new build is up and ready to be used, with a lot of new stuff and bug fixes!
    You can find a summarized changelog in the second post of the thread together with the build link. Clean flash is suggested due to the enormous quantity of changes in this release.

    I hope you appreciate my work since it is being used as base for most of other Android 10 ROMs that came out until now, even without being given the needed credits and thanks... But I won't call anyone out, don't worry.

    If you enjoy using this ROM and, unlike some other people, respect the work I'm doing for this device and for making everything stable, please feel free to donate here

    Enjoy :)
    15
    FINALLY LineageOS OFFICIAL for twolip is here, for all of you
    it has taken a while, but here we are.
    I would love to write a giant changelog of all the differences compared to the older build which was a long time ago, but that would be really way too long.
    For a very short changelog and download link, check the second post of the thread.
    In case the link where you would normally get builds, which is https://download.lineageos.org/twolip, isn't available yet, don't worry, it will be soon.

    If you appreciate my efforts into making this ROM Official and laying a base used by literally every other Android 10 custom ROM for twolip, please consider donating: https://www.paypal.me/dd3boh

    I hope you're happy now, enjoy :D
    12
    Hey guys, for everyone asking: YES an update will come, we all hope soon

    For those who don't know, I made lineage official for twolip: https://wiki.lineageos.org/devices/twolip/

    Builds aren't out yet for our device though, and that's because currently lineage build servers are under maintenance, so we have to wait until they're back up and running to get the very first official build released.

    I hope this is a nice surprise for most of you :D
    Stay safe and have a nice day