[Official] [Recovery] TWRP for daisy

Search This thread

d1ngh

Senior Member
Sep 6, 2018
50
151
Hi all,

We've worked with TeamWin to get an official release of TWRP for daisy released, and here it is! We're sponsoring continued development of TWRP for daisy and other devices, so reach out to me if you have any questions.

I have to thank Dees_Troy & TeamWin for putting in the effort to make this available for us - donate here to support them directly.

So, without further ado, here's the download link. Here's a link to the source.

Please make sure you're on the factory image. If you aren't, the instructions to do that are here. You will lose your data and you'll have to set up your phone again.

1. Enable developer options (your bootloader should still be unlocked)
2. adb reboot bootloader
3. fastboot boot twrp-daisy-3.2.3-0.img
4. Hit "Cancel" if you're prompted for a decrypt password
5. adb push ./twrp-installer-daisy-3.2.3-0.zip /sdcard
6. Run the install in TWRP to permanently install TWRP across both slots
7. Reboot (you can reboot afterwards to TWRP to verify it is there)

Thanks all - and feel free to post your experiences, questions, comments, and concerns.
❤️, Guava.
 
Last edited by a moderator:

tutankpusch

Member
Sep 9, 2018
48
14
adb says "adb: usage: push requires an argument" after using first command.
thanks for the effort though!
 
G

GuestK0065

Guest
I can't get past decryption, but I'll wait for a fixed version. Thanks for going to all this trouble!
 

brunoliveh

Member
Sep 25, 2018
10
2
Hi all,

We've worked with TeamWin to get an official release of TWRP for daisy released, and here it is! We're sponsoring continued development of TWRP for daisy and other devices, so reach out to me if you have any questions.

I have to thank Dees_Troy & TeamWin for putting in the effort to make this available for us - donate here to support them directly.

So, without further ado, here's the download link. Here's a link to the source.

Please make sure you're on the factory image. If you aren't, download the files here and run flash_all.sh, then go to recovery and factory reset. You will lose your data and you'll have to set yup your phone again.

1. Enable developer options (your bootloader should still be unlocked)
2. adb push ./twrp-installer-daisy-3.2.3-0.zip /sdcard
3. adb reboot bootloader
4. fastboot boot twrp-daisy-3.2.3-0.img
5. Run the install in TWRP to permanently install TWRP across both slots
6. Reboot (you can reboot afterwards to TWRP to verify it is there)

Thanks all - and feel free to post your experiences, questions, comments, and concerns.

How to install de TWRP inside TWRP.. im not finding the file.
And I used the command adb push...
 
Last edited by a moderator:

tutankpusch

Member
Sep 9, 2018
48
14
actually there was an error when installing twrp.zip from twrp:
"E:recv error un uevent
Unable to find partition for path '/cache'"

but it seems everything is working fine
 

brunoliveh

Member
Sep 25, 2018
10
2
Hi all,

We've worked with TeamWin to get an official release of TWRP for daisy released, and here it is! We're sponsoring continued development of TWRP for daisy and other devices, so reach out to me if you have any questions.

I have to thank Dees_Troy & TeamWin for putting in the effort to make this available for us - donate here to support them directly.

So, without further ado, here's the download link. Here's a link to the source.

Please make sure you're on the factory image. If you aren't, download the files here and run flash_all.sh, then go to recovery and factory reset. You will lose your data and you'll have to set yup your phone again.

1. Enable developer options (your bootloader should still be unlocked)
2. adb push ./twrp-installer-daisy-3.2.3-0.zip /sdcard
3. adb reboot bootloader
4. fastboot boot twrp-daisy-3.2.3-0.img
5. Run the install in TWRP to permanently install TWRP across both slots
6. Reboot (you can reboot afterwards to TWRP to verify it is there)

Thanks all - and feel free to post your experiences, questions, comments, and concerns.

using the updated command
failed to copy './twrp-installer-daisy-3.2.3-0.zip' to '/sdcard': couldn't create file: Is a directory
 
Last edited by a moderator:
G

GuestK0065

Guest
Try adb push while TWRP is booted. It should get you past the pre-load issue.

Hey, that worked! And decryption works after a reboot. But now it's boot looping into TWRP? Did I lose all my data or is there a way to make it boot back into what was installed?

If I have to reinstall it's fine, but I'd like to know :p
 

d1ngh

Senior Member
Sep 6, 2018
50
151
Hey, that worked! And decryption works after a reboot. But now it's boot looping into TWRP? Did I lose all my data or is there a way to make it boot back into what was installed?

If I have to reinstall it's fine, but I'd like to know :p

That doesn't sound good. Did you factory reset after installing twrp? If so you will have lost data but the ROM should still be there.
 
G

GuestK0065

Guest
That doesn't sound good. Did you factory reset after installing twrp? If so you will have lost data but the ROM should still be there.

I didn't. I was checking the file system and all my files are there. The ROM is the one who's gone lol.

Can I flash a GSI and have it working again?

Edit: Hooking up USB and I can access storage. Copying stuff over just in case.
 

d1ngh

Senior Member
Sep 6, 2018
50
151
I didn't. I was checking the file system and all my files are there. The ROM is the one who's gone lol.

Can I flash a GSI and have it working again?

I've been able to install TWRP before a GSI with relative ease but I couldn't get it to boot properly (phh-treble). I've also been able to install TWRP after a GSI and it works just fine. What GSI are you using? I might be able to test it out pretty quickly.
 
G

GuestK0065

Guest
I've been able to install TWRP before a GSI with relative ease but I couldn't get it to boot properly (phh-treble). I've also been able to install TWRP after a GSI and it works just fine. What GSI are you using? I might be able to test it out pretty quickly.

I was using stock Android, just with Magisk. Didn't factory reset because I wasn't using a GSI and thought it wouldn't be a problem.

I'm asking if now I can just flash a GSI and have the phone up and running again. It seems storage and everything is there and working fine.
 

hossman

Senior Member
Dec 1, 2012
976
518
Moto G Power
Google Pixel 5a
I was using stock Android, just with Magisk. Didn't factory reset because I wasn't using a GSI and thought it wouldn't be a problem.

I'm asking if now I can just flash a GSI and have the phone up and running again. It seems storage and everything is there and working fine.

Switch active slot

---------- Post added at 09:23 PM ---------- Previous post was at 09:23 PM ----------

I was using stock Android, just with Magisk. Didn't factory reset because I wasn't using a GSI and thought it wouldn't be a problem.

I'm asking if now I can just flash a GSI and have the phone up and running again. It seems storage and everything is there and working fine.

Try to Switch active slot
 
  • Like
Reactions: d1ngh

Top Liked Posts

  • There are no posts matching your filters.
  • 53
    Hi all,

    We've worked with TeamWin to get an official release of TWRP for daisy released, and here it is! We're sponsoring continued development of TWRP for daisy and other devices, so reach out to me if you have any questions.

    I have to thank Dees_Troy & TeamWin for putting in the effort to make this available for us - donate here to support them directly.

    So, without further ado, here's the download link. Here's a link to the source.

    Please make sure you're on the factory image. If you aren't, the instructions to do that are here. You will lose your data and you'll have to set up your phone again.

    1. Enable developer options (your bootloader should still be unlocked)
    2. adb reboot bootloader
    3. fastboot boot twrp-daisy-3.2.3-0.img
    4. Hit "Cancel" if you're prompted for a decrypt password
    5. adb push ./twrp-installer-daisy-3.2.3-0.zip /sdcard
    6. Run the install in TWRP to permanently install TWRP across both slots
    7. Reboot (you can reboot afterwards to TWRP to verify it is there)

    Thanks all - and feel free to post your experiences, questions, comments, and concerns.
    ❤️, Guava.
    10
    Working with LineageOS team now on official LOS. Stay tuned. We will open up a bounty program to port ROMs to Mi A2 Lite.
    7
    There is way too much conflicting information in this thread. Is it possible that someone can write a clear, up-to-date, guide on how to do flash TWRP *successfully* such that GSI roms can then be installed without (half)-bricking the device? I have been unable to make this work and trawling 35 pages to find the magic post with the right instructions hasn't worked.
    6
    I successfully installed TWRP by @opal06 on Android PIE. (Version 10.0.2.0 PDLMIFJ)
    Edit: *** without root ***
    Guide:

    Download: fixed-twrp-daisy.img
    Download: fixed-twrp-installer-daisy.zip

    1.
    Code:
    adb reboot bootloader

    2.
    Code:
    fastboot boot [B]fixed-twrp-daisy.img[/B]

    3.
    Code:
    adb push ./[B]fixed-twrp-installer-daisy.zip[/B] /sdcard

    4.
    Install -> fixed-twrp-installer-daisy.zip


    You can start TWRP with Power + Volume Up

    I have set a pattern for unlocking.
    It is queried at the start of TWRP to decrypt the data partition
    Internal memory and MicroSD are recognized correctly and are accessible. :highfive:
    5

    It seems so...

    I want to look into the source code and try to fix this over Christmas, but I'm quite new to active development...
    It would be nice to see a community effort to fix this. A working recovery would be so important for this great device. As I said, I'm ready to throw in my time and the little knowledge I have, but if others are willing to help, we will be faster... ;)