• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[OFFICIAL][ROM][11] EvolutionX 5.9.2 (11/09/2021)

Search This thread

ovi.riton

New member
Oct 20, 2014
1
1
xiz0QDJ.jpg

Evolution X 5.9 for the Xiaomi Mi A3 [laurel_sprout]
Code:
/*
* Your warranty is void. Or vaild, probably?
*
* I am not responsible for bricked devices, dead SD cards, Evolution X,
* thermonuclear war, or the current economic crisis caused by you following
* these directions. YOU are choosing to make these modificiations, and if
* you point your finger at me for messing up your device, I will LMAO at you.
*/

S97pt6u.png

Living, Breaking, Keep Evolving.
Pixel UI, customization and more, we are Evolution X!

- Team Evolution X -
@joeyhuab
@peaktogoo (Now RealAkito)

Reach us on Twitter! @EvolutionXROM




DEJpSZ3.png

- Just flash and check "The Evolver"

y09XyfR.png

Native WiFi Display/Screen cast

DO NOT FLASH GAPPS, ALREADY INCLUDED


vXLSwbr.png


First Time Install / Clean Flash
- Remove your lockscreen password!!
- Reboot to fastboot mode and falsh LineageOs IMG from laptop/pc [provided under download section]
- Boot into recovery (Press and hold Vol+ and power button)
- Perform factory reset
- Navigate Apply update -> apply from ADB
- Sideload rom .zip
adb sideload <rom zip name> (no need to change any kind of slot)
- Reboot system and #KeepEvolving


Update / Dirty Flash

- Remove your lockscreen password!!
- Reboot to fastboot mode and falsh LineageOs IMG from laptop/pc [provided under download section]
- Boot into recovery (Press and hold Vol+ and power button)
- Navigate Apply update -> apply from ADB
- Sideload rom .zip
adb sideload <rom zip name> (no need to change any kind of slot)
- Reboot to System and #KeepEvolving






z9TerqB.png


FilenameLinkAuthor
ROMEvolutionX_5.9_laurel_sprout-11-20210708-0640-OFFICIAL.zipAndroid 11 Firmare users | md5Hemant Sachdeva
RecoveryOfficial SkyhawkRecovery v3.1 (SHRP)Flashable Zip | Fastboot img
(A10 firmware only)
Hemant Sachdeva
Lineage RecoveryFlashable Zip | Fastboot img
(A10/A11 Firmware)
Source
DTBOdtbo_oss.imgFastboot img ( A10 firmware)Hemant Sachdeva
dtbo.imgfastboot flash dtbo dtbo.img (A11 firmware)Hemant Sachdeva
boot.imgAndroid 11 (R)fastboot flash boot boot.imgHemant Sachdeva

Donate me! / Official Chat / Device Support



Code:
Changelog:-
Note:
==============================
This Build is Android 11 firmware based.

You all will receive OTA Updates with Android 11 firmware support. So ANdroid 10 firmware users don't update blindly.
------------------------------
Device changes:
==============================
Updates all hals to Android R

Fixed Portrait Camera in stock camera (Front camera won't work only in this camera app as we already discussed in telegram support chat)

Added XiaomiParts and injected XiaomiDoze in it

XiaomiParts consists:
    Display Calibration
    Clear blocked Speaker
    Fast charging upto 900mAh when connected to pc using USB 3.0

R Kernel updated Latest Linux version 4.14.237
------------------------------
ROM changes:
==============================
7/8
FODCircleView: Remove duplicated FLAG_WATCH_OUTSIDE_TOUCH
FODCircleView: Set dim behind fod base layer
Merge July security patches
PixelPropsUtils: Update to July 2021 fingerprint

7/7
Fonts: Add OnePlus Sans
Fonts: Update Google Sans and OnePlus Slate
Remove WFD upstream changes
Settings: Update font picker title string

7/6
CarSystemUI: Pass FODCircleView to StatusBar constructor
DataSwitchTile: collapse notification panel onClick
FODCircleView: Hide if fingerprint detection stops
Settings: Remove empty category from Security Settings
SystemUI: Give network traffic more padding
base: prevent that double tap to sleep triggers panel expand

7/5
SystemUI: Don't enable FOD when strong auth is required
Use Asus Stitchimage as default screenshot service

7/4
AppErrorDialog: Add content type header when making POST request to pasty
SystemUI: BatteryMeter: Fix padding for % on left
SystemUI: Fix battery percent padding
SystemUI: Move percentage to left of battery
config: Do not force iorap by default

7/3
Evolver: Nuke Lock screen shortcut feature
Remove zygote related changes

7/2
AndroidSClockController: fix IndexOutOfBoundsException
IconPack{Circular,Filled}: Use the same notification and ring icons as in settings
IconPackRounded: Use correct icon for notification and ring volume
OmniStyle: Add GoT header pack
OmniStyle: Added 'Colorful' headers
SystemUI: Add a config to show correct VoLTE/VoWiFi icons
SystemUI: BrightnessSlider: Scale animation duration with defined BrightnessRampRate
SystemUI: Fix showing duplicated charging status after r38 merge
services: BrightnessAnimator: Make ramp rate non-linear for very low values

7/1
Add Android S Clocks
Add support to see if there are visible notifications in ClockPlugin
Add support to Slice in ClockPlugin
Introduce Fluid V2 lock clock
Settings: Move back Evolution X version to firmware version fragment
SystemUI: Add OnePlus Roman, Minimal and Numbers clock styles

6/29
BrightnessController: tune the slider animation duration
Plugins: Don't show captions info tooltip
base: set scrolling friction to 0.006f

6/28
Consolidate LineageHardwareManager
DozeTriggers: Add provision to pulse without proximity check
FODCircleView/FODAnimation: Clean ups and improvements
Introduce 2.1 LiveDisplay interface with IAntiFlicker support
base: Add bool to enable/disable doze by default
fixup! CameraDeviceClient: fix recognition of Y16 format
fixup! Introduce anti flicker mode in LiveDisplay
livedisplay: 2.1: Fix interfaces order
sepolicy: Add uclamp file nodes to proc_sched
sepolicy: Allow permissive backuptools on user builds
sepolicy: Allow vendor_init to set proc_sched sysfs
sepolicy: Another theme_prop denials
sepolicy: Fix some ActivityManager denials
sepolicy: Optionally build sepolicy_freeze_test

6/27
Allow Seamless rotation while PIP is active
Camera: Master callback mode support for MCX raw
Drop the maximum recommended log size from 16MiB to 8MiB
Evolver: Introduce Android 12 Style Switches
PixelPropsUtils: Make build property spoofing more reliable
Upstream ART improvements
config: Strip off some debug packages
vendor: Include makefile with art definitions

6/25
AntiFlickerTile: Fix error in handleRefreshState
LockIcon: Fix drawable log warning
Settings: Export the gravity of the fingerprint enroll animation
custom_apns: Add double quote in custom APN name check

6/22
SystemUI: Properly align owner info to the 3 left aligned clocks

6/21
FODCircleView: Improve position update
QSCustomizer: Properly apply changes with header image enabled
QSDetail: Fix QS detail panel with header image enabled
Revert to original Pixel Launcher
SystemUI: QS: Decrease vertical padding between QS tiles
fixup! DisplayPowerController: make brightness ramp rate overlay-able

6/20
AmbientDisplay: Unregister proximity when screen off FOD is active
DozeTriggers: Update setListening usage
FODCircleView: fixup AOD fingerprint support
Make Volume Panel divider transparent
PowerManager: Add proximity check on wake feature
ScreenshotTile: Make default state inactive
ScreenshotTile: Use secondary label to indicate mode
SystemUI: Fix GamingModeTile long press
SystemUI: handle camera launch gesture from keyhandler
SystemUI: Improve ScreenRecord Dialog layout
Update MIUI White FOD icon to latest
base: lockscreen: Fix left custom shortcut always launching Dialer/Contacts
fixup! Clock: Align owner info as per the clock style

6/19
Disallow certain power menu items while in lock task mode
LiveDisplay: Mark all pending intents as immutable
Settings: Allow changing face unlock method when locked
Upstream OTA Updater app changes from PE

6/18
Replace redundant nav gesture options with Immersive Navigation
Settings: Remove back swipe deadzone feature (breaks gestures)
Use EVOLUTION_FINGERPRINT to signal OTA upgrades

6/17
AppLock: Don't trigger if starting new intent of current running package
AppLock: Improve strings and cleanup
AppLock: Update tasks snapshot when needed
IconPack{Kai,Victor}: Fix clock icon
SystemUI: Improve pocket mode layout
VolumeDialog: Fix touch area on captions and ringer button when on landscape
fixup! base: SystemUI: fix volume dialog issue

6/16
CameraService: Default to HAL1 for OPCam if not specified
Evolver: Add AlarmsBlocker
Evolver: Add WakelockBlocker
Evolver: Rework Alarm & Wakelock blocker fragments
Removing dead code from Telephony which uses wakelock
Settings: Remove DSU Loader if unsupported
SystemUI: Make clock layouts aware of the media playing state
Upstream QTI BT changes from LA.QSSI.11.0.r1-12300-qssi.0 CAF tag
soong: Whitelist locale

6/14
Adaptive Charging: Make it optional
Evolver: Allow hiding FOD on doze
Filter GalleryDatab*
Filter out QTI performance spam
Modifying /dev/memcg permissions
Remove Font changes unrelated to Carbon's FontService
Set /system/etc/init.d/* permissions
Set permissions on /system/addon.d/ and files within
Shut up camera and wcnss debug output
Silence spammy logs from camera blobs (AEC_PORT and mm-camera)
adb_root: Make encryption action an argument to mkdir
add generic symlink to access userdata sysfs
cameraservice: Avoid calling getSystemCameraKind if the camera was not mapped yet
config: Remove exfat tools
debuggerd: add Evolution X version to tombstones
fixup! DozeSensors: Only use proximity sensor if supported
healthd: Add support for HVDCP_3P5 chargers
rootdir: init.rc: use default dirty writeout policy
set /system/etc/init.d/* permission

6/13
Evolver: Hide LS blur option if homescreen and LS wallpaper are different
IconPack{Sam,Victor}: Inverse vol collapse/expand anim path data
Upstream WFD fixes in frameworks/av
SystemUI: set default of NAV_BAR_HANDLE_SHOW_OVER_LOCKSCREEN to false
bionic: Enable -O
kernel: Pass absolute path for KCONFIG_ALLCONFIG
libm: Support -ffp-contract=fast

------------------------------

vEtFCeF.png

I am regular user of evolution, been using 5.8 as well but since am trying to update to 5.9 by dirty flashing, i get stuck at bootloop. Tried clean flashing too. Still the same. Could you provide me any solution for this please?
 
  • Like
Reactions: suschmania

Mukesh Sharma 36

Senior Member
I am regular user of evolution, been using 5.8 as well but since am trying to update to 5.9 by dirty flashing, i get stuck at bootloop. Tried clean flashing too. Still the same. Could you provide me any solution for this please?
Requirements:-
adb drivers
mi flash tool
latest stock A11 fastboot rom
latest evolutionX A11 rom
lineageOS recovery img
lineageOS recovery zip


Procedure:-
Part A:
take backup
boot into fastboot mode
connect phone with pc
open mi flash tool
select stock A11 rom
flash rom (select clean all)(unlocked !)
let it boot
do setup
~Video reference (Please watch both videos for better understanding)-

Part B:
boot into fastboot mode
connect phone with pc
flash lineageOS recovery img - fastboot flash boot <recovery.img>
boot into recovery (Press and hold Vol+ and power button)
do factory reset
navigate to apply update
use sdcard or apply from adb
sideload evolutionX rom - adb sideload <rom.zip>
 

colonho

Senior Member
Jan 27, 2014
74
8
29
São Miguel do Oeste -SC
I've bricked my phone after install this. Do not charge, or light. Anyone? Thanks
i installed the new recovery, make whipes, wen the cel initalize, not have reconnized wifi and mobile data. i try to reboot and the black screen apears. the celphone was death
 
Last edited:

pranto20

New member
Jul 26, 2020
1
1
Really happy to see this

Going to try in 2,3 days
xiz0QDJ.jpg

Evolution X 5.9 for the Xiaomi Mi A3 [laurel_sprout]
Code:
/*
* Your warranty is void. Or vaild, probably?
*
* I am not responsible for bricked devices, dead SD cards, Evolution X,
* thermonuclear war, or the current economic crisis caused by you following
* these directions. YOU are choosing to make these modificiations, and if
* you point your finger at me for messing up your device, I will LMAO at you.
*/

S97pt6u.png

Living, Breaking, Keep Evolving.
Pixel UI, customization and more, we are Evolution X!

- Team Evolution X -
@joeyhuab
@peaktogoo (Now RealAkito)

Reach us on Twitter! @EvolutionXROM




DEJpSZ3.png

- Just flash and check "The Evolver"

y09XyfR.png

Native WiFi Display/Screen cast

DO NOT FLASH GAPPS, ALREADY INCLUDED


vXLSwbr.png


First Time Install / Clean Flash
- Remove your lockscreen password!!
- Reboot to fastboot mode and falsh LineageOs IMG from laptop/pc [provided under download section]
- Boot into recovery (Press and hold Vol+ and power button)
- Perform factory reset
- Navigate Apply update -> apply from ADB
- Sideload rom .zip
adb sideload <rom zip name> (no need to change any kind of slot)
- Reboot system and #KeepEvolving


Update / Dirty Flash

- Remove your lockscreen password!!
- Reboot to fastboot mode and falsh LineageOs IMG from laptop/pc [provided under download section]
- Boot into recovery (Press and hold Vol+ and power button)
- Navigate Apply update -> apply from ADB
- Sideload rom .zip
adb sideload <rom zip name> (no need to change any kind of slot)
- Reboot to System and #KeepEvolving






z9TerqB.png


FilenameLinkAuthor
ROMEvolutionX_5.9_laurel_sprout-11-20210708-0640-OFFICIAL.zipAndroid 11 Firmare users | md5Hemant Sachdeva
RecoveryOfficial SkyhawkRecovery v3.1 (SHRP)Flashable Zip | Fastboot img
(A10 firmware only)
Hemant Sachdeva
Lineage RecoveryFlashable Zip | Fastboot img
(A10/A11 Firmware)
Source
DTBOdtbo_oss.imgFastboot img ( A10 firmware)Hemant Sachdeva
dtbo.imgfastboot flash dtbo dtbo.img (A11 firmware)Hemant Sachdeva
boot.imgAndroid 11 (R)fastboot flash boot boot.imgHemant Sachdeva

Donate me! / Official Chat / Device Support



Code:
Changelog:-
Note:
==============================
This Build is Android 11 firmware based.

You all will receive OTA Updates with Android 11 firmware support. So ANdroid 10 firmware users don't update blindly.
------------------------------
Device changes:
==============================
Updates all hals to Android R

Fixed Portrait Camera in stock camera (Front camera won't work only in this camera app as we already discussed in telegram support chat)

Added XiaomiParts and injected XiaomiDoze in it

XiaomiParts consists:
    Display Calibration
    Clear blocked Speaker
    Fast charging upto 900mAh when connected to pc using USB 3.0

R Kernel updated Latest Linux version 4.14.237
------------------------------
ROM changes:
==============================
7/8
FODCircleView: Remove duplicated FLAG_WATCH_OUTSIDE_TOUCH
FODCircleView: Set dim behind fod base layer
Merge July security patches
PixelPropsUtils: Update to July 2021 fingerprint

7/7
Fonts: Add OnePlus Sans
Fonts: Update Google Sans and OnePlus Slate
Remove WFD upstream changes
Settings: Update font picker title string

7/6
CarSystemUI: Pass FODCircleView to StatusBar constructor
DataSwitchTile: collapse notification panel onClick
FODCircleView: Hide if fingerprint detection stops
Settings: Remove empty category from Security Settings
SystemUI: Give network traffic more padding
base: prevent that double tap to sleep triggers panel expand

7/5
SystemUI: Don't enable FOD when strong auth is required
Use Asus Stitchimage as default screenshot service

7/4
AppErrorDialog: Add content type header when making POST request to pasty
SystemUI: BatteryMeter: Fix padding for % on left
SystemUI: Fix battery percent padding
SystemUI: Move percentage to left of battery
config: Do not force iorap by default

7/3
Evolver: Nuke Lock screen shortcut feature
Remove zygote related changes

7/2
AndroidSClockController: fix IndexOutOfBoundsException
IconPack{Circular,Filled}: Use the same notification and ring icons as in settings
IconPackRounded: Use correct icon for notification and ring volume
OmniStyle: Add GoT header pack
OmniStyle: Added 'Colorful' headers
SystemUI: Add a config to show correct VoLTE/VoWiFi icons
SystemUI: BrightnessSlider: Scale animation duration with defined BrightnessRampRate
SystemUI: Fix showing duplicated charging status after r38 merge
services: BrightnessAnimator: Make ramp rate non-linear for very low values

7/1
Add Android S Clocks
Add support to see if there are visible notifications in ClockPlugin
Add support to Slice in ClockPlugin
Introduce Fluid V2 lock clock
Settings: Move back Evolution X version to firmware version fragment
SystemUI: Add OnePlus Roman, Minimal and Numbers clock styles

6/29
BrightnessController: tune the slider animation duration
Plugins: Don't show captions info tooltip
base: set scrolling friction to 0.006f

6/28
Consolidate LineageHardwareManager
DozeTriggers: Add provision to pulse without proximity check
FODCircleView/FODAnimation: Clean ups and improvements
Introduce 2.1 LiveDisplay interface with IAntiFlicker support
base: Add bool to enable/disable doze by default
fixup! CameraDeviceClient: fix recognition of Y16 format
fixup! Introduce anti flicker mode in LiveDisplay
livedisplay: 2.1: Fix interfaces order
sepolicy: Add uclamp file nodes to proc_sched
sepolicy: Allow permissive backuptools on user builds
sepolicy: Allow vendor_init to set proc_sched sysfs
sepolicy: Another theme_prop denials
sepolicy: Fix some ActivityManager denials
sepolicy: Optionally build sepolicy_freeze_test

6/27
Allow Seamless rotation while PIP is active
Camera: Master callback mode support for MCX raw
Drop the maximum recommended log size from 16MiB to 8MiB
Evolver: Introduce Android 12 Style Switches
PixelPropsUtils: Make build property spoofing more reliable
Upstream ART improvements
config: Strip off some debug packages
vendor: Include makefile with art definitions

6/25
AntiFlickerTile: Fix error in handleRefreshState
LockIcon: Fix drawable log warning
Settings: Export the gravity of the fingerprint enroll animation
custom_apns: Add double quote in custom APN name check

6/22
SystemUI: Properly align owner info to the 3 left aligned clocks

6/21
FODCircleView: Improve position update
QSCustomizer: Properly apply changes with header image enabled
QSDetail: Fix QS detail panel with header image enabled
Revert to original Pixel Launcher
SystemUI: QS: Decrease vertical padding between QS tiles
fixup! DisplayPowerController: make brightness ramp rate overlay-able

6/20
AmbientDisplay: Unregister proximity when screen off FOD is active
DozeTriggers: Update setListening usage
FODCircleView: fixup AOD fingerprint support
Make Volume Panel divider transparent
PowerManager: Add proximity check on wake feature
ScreenshotTile: Make default state inactive
ScreenshotTile: Use secondary label to indicate mode
SystemUI: Fix GamingModeTile long press
SystemUI: handle camera launch gesture from keyhandler
SystemUI: Improve ScreenRecord Dialog layout
Update MIUI White FOD icon to latest
base: lockscreen: Fix left custom shortcut always launching Dialer/Contacts
fixup! Clock: Align owner info as per the clock style

6/19
Disallow certain power menu items while in lock task mode
LiveDisplay: Mark all pending intents as immutable
Settings: Allow changing face unlock method when locked
Upstream OTA Updater app changes from PE

6/18
Replace redundant nav gesture options with Immersive Navigation
Settings: Remove back swipe deadzone feature (breaks gestures)
Use EVOLUTION_FINGERPRINT to signal OTA upgrades

6/17
AppLock: Don't trigger if starting new intent of current running package
AppLock: Improve strings and cleanup
AppLock: Update tasks snapshot when needed
IconPack{Kai,Victor}: Fix clock icon
SystemUI: Improve pocket mode layout
VolumeDialog: Fix touch area on captions and ringer button when on landscape
fixup! base: SystemUI: fix volume dialog issue

6/16
CameraService: Default to HAL1 for OPCam if not specified
Evolver: Add AlarmsBlocker
Evolver: Add WakelockBlocker
Evolver: Rework Alarm & Wakelock blocker fragments
Removing dead code from Telephony which uses wakelock
Settings: Remove DSU Loader if unsupported
SystemUI: Make clock layouts aware of the media playing state
Upstream QTI BT changes from LA.QSSI.11.0.r1-12300-qssi.0 CAF tag
soong: Whitelist locale

6/14
Adaptive Charging: Make it optional
Evolver: Allow hiding FOD on doze
Filter GalleryDatab*
Filter out QTI performance spam
Modifying /dev/memcg permissions
Remove Font changes unrelated to Carbon's FontService
Set /system/etc/init.d/* permissions
Set permissions on /system/addon.d/ and files within
Shut up camera and wcnss debug output
Silence spammy logs from camera blobs (AEC_PORT and mm-camera)
adb_root: Make encryption action an argument to mkdir
add generic symlink to access userdata sysfs
cameraservice: Avoid calling getSystemCameraKind if the camera was not mapped yet
config: Remove exfat tools
debuggerd: add Evolution X version to tombstones
fixup! DozeSensors: Only use proximity sensor if supported
healthd: Add support for HVDCP_3P5 chargers
rootdir: init.rc: use default dirty writeout policy
set /system/etc/init.d/* permission

6/13
Evolver: Hide LS blur option if homescreen and LS wallpaper are different
IconPack{Sam,Victor}: Inverse vol collapse/expand anim path data
Upstream WFD fixes in frameworks/av
SystemUI: set default of NAV_BAR_HANDLE_SHOW_OVER_LOCKSCREEN to false
bionic: Enable -O
kernel: Pass absolute path for KCONFIG_ALLCONFIG
libm: Support -ffp-contract=fast

------------------------------

vEtFCeF.png



Fingerprint is not working in this version, please fix it.
 
  • Like
Reactions: aadarsh7

kyuuby27

Member
Feb 25, 2021
8
0
Hi, there is something that precisely a bug is not but I am curious if it can be solved or not, the matter is that the bluetooth LDAC codec does not work correctly, in previous compilations of about 2 or 3 months ago it worked perfectly, but from here a few months no
 

ItsMeJan

New member
Sep 3, 2021
4
0
finaly resolved it with xiaomiflash
MIA3_to_MICC9e_EDL_Conversion_Firmware_Non-Fixed_V12.0.3.0.QFMCNXM_10.0_cn.7z
fastboot:
device=laurel_sprout
build_number=V12.0.7.0.RFQEUXM
userdata_version=20210513.0000.00
fastboot.exe oem edl

Good sir, I experienced the same and also did what you did (above). But I'm unable to use xiaomiflash for any other than the MIA3_to_MICC9.. (above). If I try another image (below, I also took the exact one you did) xiaomiflash prompts me to enter login, which aren't "sufficient", for flashing.

then back to with xiaomiflash
laurel_sprout_global_images_V12.0.3.0.RFQMIXM_11.0
Flashing successful
fastboot.exe flash boot lineagerecovery
fastboot.exe reboot-recovery
wipe factory reset
enable adb
install sideload
adb sideload EvolutionX_5.8_laurel_sprout-11-20210612-1227-OFFICIAL.zip

Also I can't use TWRP, because since my MIA3 to MICC9 flash I can't sideload a image-zip nor copy+install a image-zip. It basically says, there is "no part A/B". Fastboot says the same.

My actual goal: I want use lineage (can't install as described tho).

Any help much appreciated!
 

ItsMeJan

New member
Sep 3, 2021
4
0
reconvert to mia3 flashing the edl stock firmware. and after update to a11fw
Sir, that's exactly what I want to do but unable to do!

Basically TWRP doesn't work, because error 7 while try to flash (unable to access A/B partition). Sideload/fastboot says same. I think I destroyed A/B by flashing MIA3_to_MICC9. So what I think I need: install stock via edl via xiaomiflash. But it needs authorization on my xiaomi account. Tried 5 different usb cables and 5 different version of xiaomiflash.

Can you help? Appreciated so much.
 

wetito

Senior Member
Dec 12, 2014
843
162
48
reggio emilia
Xiaomi Mi A3
Thanks for reply. Miflash in edl mode -> check. FInding firmware cc9e to mia3 in "your" channel -> failed. Sorry being annoying, but can you provide a link? Google hasn't helped me there.
try ask in the Channel. i don't have it. and i know, Google cant help you. i also Remember that an xda user have this rom. look at here
Post in thread '[MIUI][12][PORT][10] MIUI 12 for Mi A3 - Stable & Weekly ROM' https://forum.xda-developers.com/t/...mi-a3-stable-weekly-rom.4016457/post-85394965
 

ItsMeJan

New member
Sep 3, 2021
4
0
try ask in the Channel. i don't have it. and i know, Google cant help you. i also Remember that an xda user have this rom. look at here
Post in thread '[MIUI][12][PORT][10] MIUI 12 for Mi A3 - Stable & Weekly ROM' https://forum.xda-developers.com/t/...mi-a3-stable-weekly-rom.4016457/post-85394965
I'll have a look and will keep this update if I found a solution. So i'll try to find the right ROM and flash it via xiaomiflash + edl. Thanks mate for caring!

EDIT
As you said the following steps converted my device sucessfully from cc9e to mia3.

- start phone in edl
- open exe in unpacked MiFlash20200314.zip
- flash MiA3-service-rom-repackaged.zip

Get the files via tg-channel "Mi A3 converte to cc9e official".

Thanks for your help mate!
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 1
    Hi, there is something that precisely a bug is not but I am curious if it can be solved or not, the matter is that the bluetooth LDAC codec does not work correctly, in previous compilations of about 2 or 3 months ago it worked perfectly, but from here a few months no
    Noted.
    1
    Hey guys. I'm still using Evolution version 4.6. What should I do to upgrade?
    Do a clean flash of stock a11 and then flash evo.
    For requirements and steps check this post - https://forum.xda-developers.com/t/official-rom-11-evolutionx-5-9-1-14-08-2021.4193431/post-85378549
    1
    I managed to install. But I'll look for another one. FOD is very bad. I followed the tutorial to change the icon but it's still bad.

    Thanks for the answer.
    Fair enough but, I think this is the best rom (overall) for our mi a3.
    Anyway, feel free to explore. But be careful, one wrong step and you might brick your device.
  • 17
    xiz0QDJ.jpg

    Evolution X 5.9.2 for the Xiaomi Mi A3 [laurel_sprout]
    Code:
    /*
    * Your warranty is void. Or vaild, probably?
    *
    * I am not responsible for bricked devices, dead SD cards, Evolution X,
    * thermonuclear war, or the current economic crisis caused by you following
    * these directions. YOU are choosing to make these modificiations, and if
    * you point your finger at me for messing up your device, I will LMAO at you.
    */

    S97pt6u.png

    Living, Breaking, Keep Evolving.
    Pixel UI, customization and more, we are Evolution X!

    - Team Evolution X -
    @joeyhuab
    @peaktogoo (Now RealAkito)

    Reach us on Twitter! @EvolutionXROM




    DEJpSZ3.png

    - Just flash and check "The Evolver"

    y09XyfR.png

    Native WiFi Display/Screen cast

    DO NOT FLASH GAPPS, ALREADY INCLUDED


    vXLSwbr.png


    First Time Install / Clean Flash
    - Remove your lockscreen password!!
    - Reboot to fastboot mode and falsh LineageOs IMG from laptop/pc [provided under download section]
    - Boot into recovery (Press and hold Vol+ and power button)
    - Perform factory reset
    - Navigate Apply update -> apply from ADB
    - Sideload rom .zip
    adb sideload <rom zip name> (no need to change any kind of slot)
    - Reboot system and #KeepEvolving


    Update / Dirty Flash

    - Remove your lockscreen password!!
    - Reboot to fastboot mode and falsh LineageOs IMG from laptop/pc [provided under download section]
    - Boot into recovery (Press and hold Vol+ and power button)
    - Navigate Apply update -> apply from ADB
    - Sideload rom .zip
    adb sideload <rom zip name> (no need to change any kind of slot)
    - Reboot to System and #KeepEvolving






    z9TerqB.png


    FilenameLinkAuthor
    ROMevolution_laurel_sprout-ota-rq3a.210905.001-09111704.zipAndroid 11 Firmare users | md5Hemant Sachdeva
    RecoveryOfficial SkyhawkRecovery v3.1 (SHRP)Flashable Zip | Fastboot img
    (A10 firmware only)
    Hemant Sachdeva
    Lineage RecoveryFlashable Zip | Fastboot img
    (A10/A11 Firmware)
    Source
    DTBOdtbo_oss.imgFastboot img ( A10 firmware)Hemant Sachdeva
    dtbo.imgfastboot flash dtbo dtbo.img (A11 firmware)Hemant Sachdeva
    boot.imgAndroid 11 (R)fastboot flash boot boot.imgHemant Sachdeva

    Donate me! / Official Chat / Device Support



    Code:
    Changelog:-
    Note:
    ==============================
    This Build is Android 11 firmware based.
    
    You all will receive OTA Updates with Android 11 firmware support. So Android 10 firmware users don't update blindly.
    
    It is a signed build. Everyone is required to clean flash (last time) to experience the best output.
    
    You can expect incrimental OTA updates form next time (we require a file from older build which we don't have currently that's why can't provide incremental ota this time, now I have saved that file already).
    
    Anything regarding FOD is random, so don't expect any specific response. Two users on same build have different response.
    ------------------------------
    Device changes:
    ==============================
    Bluetooth aptX working fine (imported from Coral).
    (however, LDAC is not working)
    
    Handle ScreenOffFOD
    
    Fixed voice call volume not changing.
    
    Fixed NetworkTraffic indicator on statusbar.
    ------------------------------
    ROM changes:
    ==============================
    9/11
    Evolver: Nuke Notifications/Power menu background opacity feature
    Settings: Add Hotspot client manager from exTHmUI
    Settings: Bring back 'Do not validate' option in CA certificate spinner
    Settings: Privacy chip toggle requires SystemUI restart
    Settings: Remove support for global cleartext penalties
    netd: add MAC address firewall
    netd: fix: the order of firewallSetMACAddressRule api
    vendor: Remove force build fingerprint
    
    9/9
    Evolver: Update default FOD to A12 version
    FOD: Remove color filter from fod icons
    FOD: Use A12 fingerprint icon by default
    gms: Update Calculator and Clock from A12 Beta 5
    vendor: config: DEVICE_PACKAGE_OVERLAYS -> PRODUCT_PACKAGE_OVERLAYS
    
    9/8
    Check for vintf compatibility early in generation process
    Merge September 2021 Android security patches
    PixelPropsUtils: Update to September 2021 fingerprint
    Ticker: Adapt sysui notif context change for getIcon
    Version: Bump to 5.9.2 Sanctuary
    
    9/7
    Settings: Adjust one shot auto-brightness strings
    Settings: Default device name to marketname if available
    Settings: notifications: Add title for Advanced settings
    SettingsProvider: Set device name to marketname if available
    WifiApConfigStore: Use device model as default hotspot SSID
    btif: Use marketname as BT device name if available
    sepolicy: Expose faceunlock prop for all
    sepolicy: Expose hal1 camera list prop
    wifi: Use marketname as hotspot SSID if available
    
    9/6
    PixelPropsUtils: Do not spoof the device as a Pixel for Pixel Buds
    PixelPropsUtils: Spoof Pixel 2 for GMS (aka Safetynet fix)
    
    8/31
    GamingMode: Hide danmaku container immediately when config is changed
    GamingMode: Hide floating button after periods of time
    GamingMode: Limit the button coordinate to the inside of screen only
    PixelPropsUtils: add galaxy watch 4 plugin to spoof list
    Settings: Allow to disable permissions hub
    SUPL: Don't send IMSI / Phone number to SUPL server
    SystemUI: Limit Keyguard charging stats updates
    base: SystemUI: add delete action for partial screenshot notification
    
    8/28
    base: FPS Info: Make new formatting works with old kernel
    
    8/25
    Add the support of the three fields in MMS/SMS database
    PowerUI: Mute logcat spam
    
    8/24
    Add Cloudflare DNS as a private DNS provider
    Add IPv6 handling to dns cleartext allowlist
    Evolver: Update MIUI FOD animation names
    OOSPanel: Improve it
    P404Panel, ShapeShiftPanel: Don't show captions info tooltip
    Settings: Add support for global cleartext penalties
    Settings: DT2Doze: Move Preference to gesture settings
    Settings: Private DNS: add adguard DNS to private DNS
    kernel: Fix vdso32 building for 4.19+ kernels
    plugin: Set miui tap target size back to 46dip
    
    8/23
    APN: Fix Three UK / FreedomPop APN (MCC 234 MNC 20)
    Evolver: GamingMode: Add option for customizing menu opacity
    Evolver: Switch to exTHmUI’s GamingMode support
    Settings: Fix A12 Searchbar Style layout
    SystemUI: Make A12 DP3 clock bigger
    SystemUI: Remove QS drag handle
    SystemUI: export screenrecord.RecordingService for GamingMode
    SystemUI: move RecordingService into main process
    fixup! Keyguard: Allow disabling fingerprint wake-and-unlock
    overlays: overlay brightness thumb in oos icon pack
    overlays: sync some dimens in oos pack
    
    8/22
    MediaControlPanel: Slight rework on media art player
    SystemUI: Disable all-caps for smart reply button text
    SystemUI: Fix overlays resetting on every reboot
    TwilightService: Save and use last fetched location
    core: Wipe package cache on upgrade even on user build
    
    8/21
    base: SystemUI: halt LyricTicker after statusbar lyric disabled
    
    8/20
    AdaptiveCharging: Make sure resume level is lower than suspend level
    
    8/18
    Fix reading /proc/locks when lock is held by another process
    
    8/17
    FODCircleView: Always update FODAnimation position
    Reduce NotificationHistoryDatabase logspam
    SystemUI: overlay statusbar nfc icon in oos icon pack
    Update translations
    
    ------------------------------

    vEtFCeF.png

    3
    Is this ROM gonna become Official anytime soon ?
    2
    Incerdibly bloated with too much Google garbage. It should've either had just the core GApps or none at all IMHO.
    Go report it to playstore who is bloating!!
    It's your laziness or stupidity who didn't said NO to google playstore to download those recommended apps(when it was asking for changing font size and wallpaper stuff) just after login of your Google Account!!!
    And instead of posting here u can just simply uninstall the apps🤷🏻‍♂️
    2
    Thanks bro, it works good now, did you manage to get Magisk to work?
    Magisk is in beta state. It's not working perfectly on any ROM of our device or other's in Android 11.
    All we need is patience 😌
    2
    Is this ROM gonna become Official anytime soon ?
    I will try my best, For making it official i need to make SELinux security enforcing which will take too much time and i have to manage my college work too, Hope you understand :).
    You will not lack in features in Unofficial builds.