Your messing something up for sure.
How are you flashing?
Step by step what are you doing?
Screenshots would be helpfull
[OFFICIAL][ROM]Bootlegers ROM Pie for Galaxy J5 [SM-J500H/F/FN/G/M/Y]
- Thread starter jenslody
- Start date
- Status
How are you flashing?
Step by step what are you doing?
Screenshots would be helpfull
This was my next post, you beat me to it.
I agree, esp since we just got someone running on this with the same device within the past 24 hrs. This guy is clearly doing something wrong.
"When you did this, i presume you hit install, then the button to install image on the bottom part of the screen, then selected the image, selected recovery, and then rebooted?" Yes i chose recovery not boot sector and then swiped to activate it. I have started to recovery in TWRP and rebooted the other way.
Sorry i messaged private but this forum, i have to wait 10 messages to be .
Sorry i messaged private but this forum, i have to wait 10 messages to be .
Its ok, i usually am bouncing on and off my phone, so it takes some time to get back on depending on whats going on.
So you installed it the right way, thats good. If i understand you, it did boot up into twrp when you rebooted?
I installed it in recovery section and then pressed reboot to recovery and the mobile restarts and it goes black. Must you click reboot to recovery direct after installation or can you go back in the menu backwards after installed ad click system and restart to recovery?
Either one, but i would do whatever is needed to reboot to recovery
I added a TWRP for Odin, so you can directly flash my TWRP on your device.
It has a md5sum, so flashing a corrupted file should not be possible.
Please doublecheck that you use the TWRP for your device and make sure that you use MarshMallow bootloader and modem.
Thank you!
But how do you mean: Please doublecheck that you use the TWRP for your device and make sure that you use MarshMallow bootloader and modem?
That i have not used before.
In ODIN 3.10 i only select https://android.jenslody.de/BootleggersROM/j5nlte/TWRP/TWRP_3.2.3_j5nlte_20181222_jenslody.tar.md5 from AP button.
CP button for these below?
https://androidfilehost.com/?w=files&flid=158174
BL_J500FNXXU1BPH1.tar
MODEM_J500FNXXU1BPH1.tar
Which order shall it be installed?
INSTALLATION:
1.- Download BL and modem for your model phone
2.- Enter in Download mode (Power + home + Volume Down)
3.- Untick autoreboot in odin
4.- Put BL_J500xxx.tar into BL or CP tab and click Start
5.- After enter in mode Download again manually
6.- Put Modem_J500xx.tar into CP tab and click start
7.- After you can already put the recovery 3.2.3 rom of the version that you decided to return
With best regards.
But how do you mean: Please doublecheck that you use the TWRP for your device and make sure that you use MarshMallow bootloader and modem?
That i have not used before.
In ODIN 3.10 i only select https://android.jenslody.de/BootleggersROM/j5nlte/TWRP/TWRP_3.2.3_j5nlte_20181222_jenslody.tar.md5 from AP button.
CP button for these below?
https://androidfilehost.com/?w=files&flid=158174
BL_J500FNXXU1BPH1.tar
MODEM_J500FNXXU1BPH1.tar
Which order shall it be installed?
INSTALLATION:
1.- Download BL and modem for your model phone
2.- Enter in Download mode (Power + home + Volume Down)
3.- Untick autoreboot in odin
4.- Put BL_J500xxx.tar into BL or CP tab and click Start
5.- After enter in mode Download again manually
6.- Put Modem_J500xx.tar into CP tab and click start
7.- After you can already put the recovery 3.2.3 rom of the version that you decided to return
With best regards.
Last edited:
What he means by the marshmallow part is this: did you start off with stock android 5.1.1 or 6.0.1? We need stock 6.0.1 for this to work.
Hi,
I have not ever installed any modem or BL from the beginning. How can I check which version I have?
And shall I install 6.0.1 modem and BL before 3.2.3? How do I do it? Were will these files be placed in boot? I will use Odin 3.10.7...
As non developer I have to read a lot of forum to find the right answer.
With best regards.
---------- Post added at 08:58 AM ---------- Previous post was at 08:37 AM ----------
Hi,
I really need this to work because soon, the bank software will ask for it.
With best regards
---------- Post added at 09:10 AM ---------- Previous post was at 08:58 AM ----------
I have aosp ext 4.5 android 7.1.2. Oreo 8.0 did not work. Bluetooth does not work.
I have not ever installed any modem or BL from the beginning. How can I check which version I have?
And shall I install 6.0.1 modem and BL before 3.2.3? How do I do it? Were will these files be placed in boot? I will use Odin 3.10.7...
As non developer I have to read a lot of forum to find the right answer.
With best regards.
---------- Post added at 08:58 AM ---------- Previous post was at 08:37 AM ----------
Hi,
I really need this to work because soon, the bank software will ask for it.
With best regards
---------- Post added at 09:10 AM ---------- Previous post was at 08:58 AM ----------
I have aosp ext 4.5 android 7.1.2. Oreo 8.0 did not work. Bluetooth does not work.
Follow this guide to change bootloader and modem https://forum.xda-developers.com/ga...5-1-1-bootloader-modem-j500xx-t3566801/page15
I just woke up and read this. Your aosp ext 4.5 requires LP bootloader. We need you on MM bootloader. Please follow the guide and we'll help you out as needed. Grab odin, grab the files, and flash what its teling you to flash.
F-Droid Privileged Extension keeps crashing after June 11 update. I've installed F-Droid using Nanodroid's Magisk modules. I don't know if that's why it's crashing, but it was working just fine before the update. Here's the crash log:
https://del.dog/reyajezuga.cs
https://del.dog/reyajezuga.cs
Attachments
Location can't turn on/off from quick settings tiles. J53gxx at latest build.
Signature Spoofing not working and when I use microg it says google service not available
Hi,
Where can I get hold of MM 6.0.1 BL & MODEM tar files with region NEE Sweden latest version 2017.07.xx? Does it matter which region these files are from? BL in BL and Modem in CP in Odin 3.10.7?! Will TWRP 3.2.3 work without black screen with 6.0.1...? Can aosp 4.5 Android 7.1.2 work with 6.0.1 BL+modem?
W.b.r
Menola3333
Where can I get hold of MM 6.0.1 BL & MODEM tar files with region NEE Sweden latest version 2017.07.xx? Does it matter which region these files are from? BL in BL and Modem in CP in Odin 3.10.7?! Will TWRP 3.2.3 work without black screen with 6.0.1...? Can aosp 4.5 Android 7.1.2 work with 6.0.1 BL+modem?
W.b.r
Menola3333
If you want, you can dl from sammobile the update specifically for your region, then use 7zip to extract. I don't believe BL and modem regions are too important, b/c i got my j500m running on 6.0.1 with a region/carrier of TTT, thats trinidad and tobago. I'm now using a BL and modem from columbia and everything is good.
Odin 3.13.3 is available. I have put everything in the AP box to flash the individual partitions like you will be doing, and no issues. You can also flash the recovery from there too. I have flashed the *.tar recovery files only, nothing else.
I have not experienced black screen, but i've been on a MM BL the whole time
The AOSP that you refer to and have on your device is useless on MM BL. Is there a way to bypass the check? Maybe, but i think it was built into the rom to work only with LP BL. You give up that rom for the opportunity to flash more up to date stuff.
You have to turn it on in two places:
1. in "Settings -> Bootleg dumpster" for the rom,
2. per app, it should be requested by it,or in "Settings -> Apps & notifications -> Advanced -> App permissions".
Is there any way to install TWRP without ODIN so that I can install this ROM?
If u r on samsung's stock recovery u cant flash custom TWRP without odin
But if u r already on custom recovery and want to flash jenslody's TWRP u can flash image file from your Twrp.
- Status
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone