• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[OFFICIAL]TWRP 3.0.2-1 Recovery for Onyx

Search This thread

Nachiket.Namjoshi

Senior Member
Aug 16, 2012
710
2,054
◄♪♫██ ♪♫►
Code:
/*
 * Your warranty is maybe still valid.
 *
 * I am not responsible for bricked devices, dead SD cards,
 * thermonuclear war, or you getting fired because the alarm app failed. Please
 * do some research if you have any concerns about features included in this ROM
 * before flashing it! YOU are choosing to make these modifications, and if
 * you point the finger at me for messing up your device, I will laugh at you.
 *
 */
Introduction:

TWRP for OnePlus X (onyx)

Here are a few points to consider:
  • This Recovery should only be used for flashing when you are on New Bootloader
  • This recovery MUST NOT be used to flash a ROM that is based on old bootloader
  • Using this recovery, you may break the OTA. So it is advised that you should not flash OTA with this. Rather, Download OTA zip and then flash (Only if you know what you are doing)

Also refer This Post too.​
Downloads & Flashing Instructions:CREDITS:

* TWRP Team
* eng.stk
FAQs:

Please Read This Post first

Q. I am on OOS 2.x/CM/AOSP based ROM, How do I use this?
A: Just Upgrade to OOS 3.x based ROM from TWRP. Then Flash this.

Q. Why Do I use this if i can just flash everything I need while updating to OOS 3.x ?
A: Well, There can be change of minds/plans. Also, OnePlus is close to releasing their sources for MM kernels. I saw no recovery to deal with custom kernels so I built it.
 
Last edited:

dadaz007

Senior Member
Feb 6, 2012
574
180
Morteau
Just to know, what's the difference between this and eng.stk one ?

Yours is compiled from just released sources ?
 

Kéno40

Senior Member
Nov 1, 2010
2,288
572
I think, it could be usefull, as it was clear for a lot of people with BS V41, to add a disclaimer like :
- this is a TWRP to flash and use on OOS 3 only
- it can not be used to flash OOS 3 while you are on OOS2 or a custom ROM CM13, RR....
- it can not be use to flash custom Roms like CM, AOSP, RR.....
Am I right ?
 
Last edited:

Nachiket.Namjoshi

Senior Member
Aug 16, 2012
710
2,054
◄♪♫██ ♪♫►
I think, it could be usefull, as it was clear for a lot of people with BS V41, to add a disclaimer like :
- this is a TWRP to flash and use on OOS 3 only
- it can not be used to flash OOS 3 while you are on OOS2
- it can not be use to flash custom Roms like CM, AOSP, RR.....
Am I right ?
Yes, Indeed. I'll add this to OP

Just to know, what's the difference between this and eng.stk one ?

Yours is compiled from just released sources ?

Compiled from source, yes. latest. mm branch.

We are supposed to flash this when we are on OOS3 and not before, right?

And also, all subversions of OOS3?

Yep. Only for OOS 3.x and based ROMs. cannot be used to flash other ROMs. for that, use Official TWRP thats HERE

Also, what is the advantage of using this TWRP over the bluspark one?

Blu spark is to be used for flashing OOS 2.x/CM/AOSP/CAF based ROMs.
But this recovery is to be used to flash OOS 3.x based ROMs.
 
Last edited:

xdaHG

Member
Oct 19, 2015
12
3
Delhi
We are supposed to flash this when we are on OOS3 and not before, right?

And also, all subversions of OOS3?

---------- Post added at 01:34 PM ---------- Previous post was at 12:52 PM ----------

Also, what is the advantage of using this TWRP over the bluspark one?
 

namquang93

Senior Member
May 15, 2015
326
109
Hanoi
I tried this one to flash H2OS 2.0 (MM) and get an error message said that my phone is ONE, and the H2OS zip file is for E1001. Then I tried bluspark twrp 3.0.2.0-2 v41 and I was able to flash the zip.
 

ksigit

Senior Member
Feb 9, 2014
313
132
twrp-3.0.2-0-onyx-OOS-stable.img

DOWNLOAD
  • twrp-3.0.2-0-onyx-OOS-stable.img - AFH
CHANGELOG:
Code:
[B]twrp-3.0.2-0-onyx-OOS-stable.img[/B]
* fixed  kernel panic on usb attachment in recovery

Nice effort!
Found 2 issues though:
- double tap 2 wake doesn't work
- problems installing H2OS MM (error 7, this package is for bla..bla..) >> edit: same issue as previous post
Both are working in eng.stk version.
 
  • Like
Reactions: Nachiket.Namjoshi

Nachiket.Namjoshi

Senior Member
Aug 16, 2012
710
2,054
◄♪♫██ ♪♫►

dadaz007

Senior Member
Feb 6, 2012
574
180
Morteau
I've flashed via TWRP and via Flashify, Rashr.... always selecting recovery image.

Edit: I think I find why it wouldn't boot. I haven't seen but I was on bluspark twrp.
I flash your previous twrp version, rebbot to recovery and flash last version and it works now.
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 41
    Code:
    /*
     * Your warranty is maybe still valid.
     *
     * I am not responsible for bricked devices, dead SD cards,
     * thermonuclear war, or you getting fired because the alarm app failed. Please
     * do some research if you have any concerns about features included in this ROM
     * before flashing it! YOU are choosing to make these modifications, and if
     * you point the finger at me for messing up your device, I will laugh at you.
     *
     */
    Introduction:

    TWRP for OnePlus X (onyx)

    Here are a few points to consider:
    • This Recovery should only be used for flashing when you are on New Bootloader
    • This recovery MUST NOT be used to flash a ROM that is based on old bootloader
    • Using this recovery, you may break the OTA. So it is advised that you should not flash OTA with this. Rather, Download OTA zip and then flash (Only if you know what you are doing)

    Also refer This Post too.​
    Downloads & Flashing Instructions:CREDITS:

    * TWRP Team
    * eng.stk
    FAQs:

    Please Read This Post first

    Q. I am on OOS 2.x/CM/AOSP based ROM, How do I use this?
    A: Just Upgrade to OOS 3.x based ROM from TWRP. Then Flash this.

    Q. Why Do I use this if i can just flash everything I need while updating to OOS 3.x ?
    A: Well, There can be change of minds/plans. Also, OnePlus is close to releasing their sources for MM kernels. I saw no recovery to deal with custom kernels so I built it.
    24
    KUDOS BOJS, WE ARE NOW OFFICIAL :D

    Official TWRP Page for OnePlus X (onyx)

    Congrats & Thanks to everyone :D
    9
    UPDATE !

    UPDATE !

    DOWNLOADS:

    twrp-3.0.2-0-onyx-20161020-085152.img - AFH


    CHANGELOG:
    Code:
    [B]twrp-3.0.2-0-onyx-20161020-085152.img[/B]
    * Bring back DT2W
    * Bring back OTG
    6
    UPDATE !

    UPDATE !

    DOWNLOADS:

    • twrp-3.0.2-0-onyx-20161109-091415.img - AFH
    CHANGELOGS:
    Code:
    [SIZE=2][B]twrp-3.0.2-0-onyx-20161109-091415.img[/B]
    * Fixed unwanted errors
    * Fixed up typos
    * Fixed long boot times for certain devices[/SIZE]
    When I try to flash a rom with this recovery i always have an error 7
    This new update will fix it.

    @Nachiket.Namjoshi We need Aroma

    soon brothers, soon!
    4
    I think, it could be usefull, as it was clear for a lot of people with BS V41, to add a disclaimer like :
    - this is a TWRP to flash and use on OOS 3 only
    - it can not be used to flash OOS 3 while you are on OOS2 or a custom ROM CM13, RR....
    - it can not be use to flash custom Roms like CM, AOSP, RR.....
    Am I right ?