• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!
  • Fill out your device list and let everyone know which phones you have!    Edit Your Device Inventory

[OFFICIAL] TWRP 3.2.0.0 for ZUK Edge

Search This thread

kaankulahli

Senior Member
Sep 3, 2015
317
446
İstanbul
121f722c3506f8851da6ead3e9d9f666.png




İnstall İnstructions:


1- Enable allow oem unlock from developer options in settings.
2- Power off your phone.
3-*Press the power key while holding down the volume down key.
4- You should see a menu.
5- Connect your phone to PC , open cmd, and write*fastboot -i 9x2b4c oem unlock-go .
6- Your phone will open.
7-*Power off your phone again and press the power key while holding down the volume down key.
8- You'll see a menu again.
9- Extract your downloaded archive.
10- You should see recovery.img.
11-*In the folder where recovery.img file is located, right-click while holding down the shift key.
12- Write*fastboot flash recovery recovery.img*to cmd screen.
13- Select recovery with volume keys and press power button.
14- Your flashed twrp will open.[/align]

TWRP Changes

CHANGELOG for 3.1.1.0:
Backups will now include adopted storage keys (Dees_Troy)
Fixed an adb restore issue (bigbiff)
Fixed rebooting when no OS is present (Dees_Troy)
Fixed line wrapping in the GUI terminal (_that)
Updated TWRP source code to AOSP 7.1.2 (Dees_Troy)Updated TWRP source code to AOSP 7.1.2

CHANGELOG for 3.1.0.0

vold decrypt on a few select HTC devices, TWRP will now attempt to use the system partition's vold and vdc binaries and libraries to decrypt the data partition (nkk71 and CaptainThrowback)
adb backup to stream a backup directly to or from your PC, see documentation here (bigbiff)
tweak MTP startup routines (mdmower)
support new Android 7.x xattrs for backup and restore to fix loss of data after a restore (Dees_Troy)
support POSIX file capabilities backup and restore to fix VoLTE on HTC devices and possibly other issues (Dees_Troy)
better indicate to users that internal storage is not backed up (Dees_Troy)
improve automatic determination of TW_THEME (mdmower)
minimal getcap and setcap support (_that)
try mounting both ext4 and f2fs during decrypt (jcadduono and Dees_Troy)
shut off backlight with power key (mdmower)
timeout during FDE decrypt (Dees_Troy and nkk71)
support for FBE decrypt and backing up and restoring FBE policies (Dees_Troy)
boot slot support (Dees_Troy)
TWRP app install prompt during reboot (Dees_Troy)
support for AB OTA zips (Dees_Troy)
support new Android 7.x log command (Dees_Troy)
update recovery sources to AOSP 7.1 (Dees_Troy)
numerous bugfixes and improvements by too many people to mention.

CHANGELOG for 3.0.2-0:

-Fix a bug with the input box that affected masked inputs (passwords). This fixes decrypt of full device encryption on devices that support decrypt. This bug also impacts encrypted backups. Users are highly encouraged to stop using 3.0.1 if you use encrypted backups or if you need decrypt of data in TWRP.
-Add Greek translation to some builds.

CHANGELOG for 3.0.1-0:

-support new CM 13.0 pattern encryption (sultanqasim)
-fix slow flashing issue due to modprobe (present on only some devices) (#twrp)
-libtar updated to latest upstream and fixes (jcadduono)
-fixes for loading custom themes (_that)
-TWRP will now detect and install TWRP themes automatically through the normal zip install process (Dees_Troy)
-translation updates - added Italian, Czech and Polish and significant updates to Dutch
-progress bar improvements - progress bar updates during image flashing and better tracks progress during file system backups (tar) (Dees_Troy)
-fix input box text display (Dees_Troy)
-reboot option after zip install complete (bigbiff)
-other mostly invisible bug fixes and improvements

CHANGELOG for 3.0.0-0:

-Completely new theme - Much more modern and much nicer looking (by z31s1g)
-True Terminal Emulator - Includes arrow keys, tab and tab completion, etc. (by _that)
-Language translation - It won’t be perfect and especially some languages that require large font files like Chinese & Japanese won’t be availble on most devices. Also some languages may only be partially translated at this time. Feel free to submit more translations to OmniROM’s Gerrit. (mostly by Dees_Troy)
-Flashing of sparse images - On select devices you will be able to flash some parts of factory images via the TWRP GUI (by HashBang173)
-Adopted storage support for select devices - TWRP can now decrypt adopted storage partitions from Marshmallow
-Reworked graphics to bring us more up to date with AOSP - includes support for adf and drm graphics (by Dees_Troy)
-SuperSU prompt will no longer display if a Marshmallow ROM is installed
-Update exfat, exfat fuse, dosfstools (by mdmower)
-Update AOSP base to 6.0
-A huge laundry list of other minor fixes and tweaks

WARNING: This is our first release in a long time. We have a lot of new and somewhat aggressive changes in this new release. The changes to the graphics back-end may cause some devices to not boot up properly or have other display-related issues. If you are not in a position to reflash an older build of TWRP, then wait until you are or at least wait until others have tried the new version for your specific device. You don’t want to end up with a non-working recovery and have to wait several hours or days to get to a computer to be able to fix it.

Notes for themers: In addition to the udpated theme, we have introduced a theme version variable to the TWRP theme system. If the theme version does not match the version that TWRP expects, TWRP will reject the custom theme and load its stock theme. This change will ensure that people who update TWRP without updating their theme will still have a workable recovery. We have removed libjpeg support. The stock theme was only using a jpeg image for the splash / curtain. This change means that any custom themes will no longer be able to use jpeg images. It also means that tools used to repack recovery images with a different curtain / splash will need to be updated to use the new method.

Version number notes: For a while we’ve been using a 4 digit version number and reserved the 4th digit for device-specific updates. For instance, we find and fix a device-specific issue like decryption of data on Nexus 5, we would release that as a 2.8.7.1. After a while, some people would start asking where 2.8.7.1 was for other devices. So, going forward we have decided to change the numbering scheme to 3.0.0-2, etc. Our hope is that this version numbering scheme will more clearly identify that the 4th digit does not indicate a version change for the code base.

We need your help! The bulk of TWRP work is done by 3 people on a volunteer basis. We have pushed most of our device files to our github and we have a gerrit instance. If you have the ability, please help us maintain our official devices and/or add your device to our official device list. Thanks in advance!

CHANGELOG for 2.8.7.0:

-Initial ground work for software drawn keyboard (_that)
-Fix handling of wiping internal storage on datamedia devices (xuefer)
-Allow DataManager to set and read values from the system properties (xuefer)
-Fix crash when taking screenshots on arm64 devices (xuefer)
-Fix error message after an ORS script completes (Dees_Troy)
-Fix crashes / error when creating encrypted backups (_that, Dees_Troy)
-Add system read only option – more details below (Dees_Troy)
-Add resize2fs and GUI option to run resize2fs (Dees_Troy)
-Fix crash loop caused by empty lines in AOSP recovery command file (_that)
-Prevent duplicate page overlays such as multiple lock screens (mdmower)

Note: As always, be sure your custom theme is up to date (or remove your custom theme) before updating TWRP.

System read only option: Devices that ship with 5.0 and higher as their initial OS are using block level OTA updates. With this style of OTA update, the update script checks to see if the system partition has ever been mounted read/write. Further, the script also usually runs an SHA sum of the entire system partition to detect if any changes have been made. If any changes have been made, the OTA update will refuse to install. Since not all OEMs and devices have factory images available, we have created a new feature in TWRP that detects if the system partition has ever been mounted read/write. If not, you will be prompted asking if you want TWRP to mount system as read/write. If you choose not to allow TWRP to mount as read/write, TWRP won’t prompt to install SuperSU and TWRP won’t try to patch the stock ROM to prevent TWRP from being replaced by stock recovery. The goal of this option is to hopefully allow the user to make a raw system image backup that they can use to get back to a state where they can take OTA updates again.

resize2fs feature: On some devices like the Nexus 6, the factory images include a userdata image that is the proper size only for the 32GB units. If you flash the factory image to a 64GB Nexus 6, the data partition will appear as if it only has the free space of a 32GB device. Using the resize2fs option, TWRP can resize your data partition to take up the full space available. The resize2fs may also be useful to resize system partitions on devices where custom ROM system images don’t take up the full partition space. Lastly, resize2fs may be useful in some cases to reserve the proper space at the end of a data partition for a full disk encryption key, should your partition be formatted incorrectly for some reason.

This new version also marks our first set of full builds using our new jenkins build server. You can track the progress of builds at https://jenkins.twrp.me and we have taken additional steps to make it easier for device maintainers to step up and submit patches to our gerrit server at https://gerrit.twrp.me to help us keep devices up to date and working.

Bugs:

* Not that a bugs :) Really stable


Download's Lİnk

ZUK Edge [OFFICIAL] TWRP 3.1.1.0.zip [16.9*MB]

Special Thanks:

z2-dev developer teams

@bigbiff for official bring up



XDA:DevDB Information
[OFFICIAL] TWRP 3.1.1.0 for ZUK Edge , ROM for the Lenovo Zuk Edge

Contributors
kaankulahli
Source Code: https://github.com/z2x-dev

ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Based On: Omni

Version Information
Status: Stable
Current Stable Version: 1.0

Created 2017-09-29
Last Updated 2017-09-29
 
Last edited:

hstop

Member
Apr 3, 2009
28
4
Is there any chance to get a version with treble support? I installed Ressurection Remix Oreo on my Zuk Edge and cannot install anything via Recovery anymore since Vendor Partitions cannot be mounted.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 4
    121f722c3506f8851da6ead3e9d9f666.png




    İnstall İnstructions:


    1- Enable allow oem unlock from developer options in settings.
    2- Power off your phone.
    3-*Press the power key while holding down the volume down key.
    4- You should see a menu.
    5- Connect your phone to PC , open cmd, and write*fastboot -i 9x2b4c oem unlock-go .
    6- Your phone will open.
    7-*Power off your phone again and press the power key while holding down the volume down key.
    8- You'll see a menu again.
    9- Extract your downloaded archive.
    10- You should see recovery.img.
    11-*In the folder where recovery.img file is located, right-click while holding down the shift key.
    12- Write*fastboot flash recovery recovery.img*to cmd screen.
    13- Select recovery with volume keys and press power button.
    14- Your flashed twrp will open.[/align]

    TWRP Changes

    CHANGELOG for 3.1.1.0:
    Backups will now include adopted storage keys (Dees_Troy)
    Fixed an adb restore issue (bigbiff)
    Fixed rebooting when no OS is present (Dees_Troy)
    Fixed line wrapping in the GUI terminal (_that)
    Updated TWRP source code to AOSP 7.1.2 (Dees_Troy)Updated TWRP source code to AOSP 7.1.2

    CHANGELOG for 3.1.0.0

    vold decrypt on a few select HTC devices, TWRP will now attempt to use the system partition's vold and vdc binaries and libraries to decrypt the data partition (nkk71 and CaptainThrowback)
    adb backup to stream a backup directly to or from your PC, see documentation here (bigbiff)
    tweak MTP startup routines (mdmower)
    support new Android 7.x xattrs for backup and restore to fix loss of data after a restore (Dees_Troy)
    support POSIX file capabilities backup and restore to fix VoLTE on HTC devices and possibly other issues (Dees_Troy)
    better indicate to users that internal storage is not backed up (Dees_Troy)
    improve automatic determination of TW_THEME (mdmower)
    minimal getcap and setcap support (_that)
    try mounting both ext4 and f2fs during decrypt (jcadduono and Dees_Troy)
    shut off backlight with power key (mdmower)
    timeout during FDE decrypt (Dees_Troy and nkk71)
    support for FBE decrypt and backing up and restoring FBE policies (Dees_Troy)
    boot slot support (Dees_Troy)
    TWRP app install prompt during reboot (Dees_Troy)
    support for AB OTA zips (Dees_Troy)
    support new Android 7.x log command (Dees_Troy)
    update recovery sources to AOSP 7.1 (Dees_Troy)
    numerous bugfixes and improvements by too many people to mention.

    CHANGELOG for 3.0.2-0:

    -Fix a bug with the input box that affected masked inputs (passwords). This fixes decrypt of full device encryption on devices that support decrypt. This bug also impacts encrypted backups. Users are highly encouraged to stop using 3.0.1 if you use encrypted backups or if you need decrypt of data in TWRP.
    -Add Greek translation to some builds.

    CHANGELOG for 3.0.1-0:

    -support new CM 13.0 pattern encryption (sultanqasim)
    -fix slow flashing issue due to modprobe (present on only some devices) (#twrp)
    -libtar updated to latest upstream and fixes (jcadduono)
    -fixes for loading custom themes (_that)
    -TWRP will now detect and install TWRP themes automatically through the normal zip install process (Dees_Troy)
    -translation updates - added Italian, Czech and Polish and significant updates to Dutch
    -progress bar improvements - progress bar updates during image flashing and better tracks progress during file system backups (tar) (Dees_Troy)
    -fix input box text display (Dees_Troy)
    -reboot option after zip install complete (bigbiff)
    -other mostly invisible bug fixes and improvements

    CHANGELOG for 3.0.0-0:

    -Completely new theme - Much more modern and much nicer looking (by z31s1g)
    -True Terminal Emulator - Includes arrow keys, tab and tab completion, etc. (by _that)
    -Language translation - It won’t be perfect and especially some languages that require large font files like Chinese & Japanese won’t be availble on most devices. Also some languages may only be partially translated at this time. Feel free to submit more translations to OmniROM’s Gerrit. (mostly by Dees_Troy)
    -Flashing of sparse images - On select devices you will be able to flash some parts of factory images via the TWRP GUI (by HashBang173)
    -Adopted storage support for select devices - TWRP can now decrypt adopted storage partitions from Marshmallow
    -Reworked graphics to bring us more up to date with AOSP - includes support for adf and drm graphics (by Dees_Troy)
    -SuperSU prompt will no longer display if a Marshmallow ROM is installed
    -Update exfat, exfat fuse, dosfstools (by mdmower)
    -Update AOSP base to 6.0
    -A huge laundry list of other minor fixes and tweaks

    WARNING: This is our first release in a long time. We have a lot of new and somewhat aggressive changes in this new release. The changes to the graphics back-end may cause some devices to not boot up properly or have other display-related issues. If you are not in a position to reflash an older build of TWRP, then wait until you are or at least wait until others have tried the new version for your specific device. You don’t want to end up with a non-working recovery and have to wait several hours or days to get to a computer to be able to fix it.

    Notes for themers: In addition to the udpated theme, we have introduced a theme version variable to the TWRP theme system. If the theme version does not match the version that TWRP expects, TWRP will reject the custom theme and load its stock theme. This change will ensure that people who update TWRP without updating their theme will still have a workable recovery. We have removed libjpeg support. The stock theme was only using a jpeg image for the splash / curtain. This change means that any custom themes will no longer be able to use jpeg images. It also means that tools used to repack recovery images with a different curtain / splash will need to be updated to use the new method.

    Version number notes: For a while we’ve been using a 4 digit version number and reserved the 4th digit for device-specific updates. For instance, we find and fix a device-specific issue like decryption of data on Nexus 5, we would release that as a 2.8.7.1. After a while, some people would start asking where 2.8.7.1 was for other devices. So, going forward we have decided to change the numbering scheme to 3.0.0-2, etc. Our hope is that this version numbering scheme will more clearly identify that the 4th digit does not indicate a version change for the code base.

    We need your help! The bulk of TWRP work is done by 3 people on a volunteer basis. We have pushed most of our device files to our github and we have a gerrit instance. If you have the ability, please help us maintain our official devices and/or add your device to our official device list. Thanks in advance!

    CHANGELOG for 2.8.7.0:

    -Initial ground work for software drawn keyboard (_that)
    -Fix handling of wiping internal storage on datamedia devices (xuefer)
    -Allow DataManager to set and read values from the system properties (xuefer)
    -Fix crash when taking screenshots on arm64 devices (xuefer)
    -Fix error message after an ORS script completes (Dees_Troy)
    -Fix crashes / error when creating encrypted backups (_that, Dees_Troy)
    -Add system read only option – more details below (Dees_Troy)
    -Add resize2fs and GUI option to run resize2fs (Dees_Troy)
    -Fix crash loop caused by empty lines in AOSP recovery command file (_that)
    -Prevent duplicate page overlays such as multiple lock screens (mdmower)

    Note: As always, be sure your custom theme is up to date (or remove your custom theme) before updating TWRP.

    System read only option: Devices that ship with 5.0 and higher as their initial OS are using block level OTA updates. With this style of OTA update, the update script checks to see if the system partition has ever been mounted read/write. Further, the script also usually runs an SHA sum of the entire system partition to detect if any changes have been made. If any changes have been made, the OTA update will refuse to install. Since not all OEMs and devices have factory images available, we have created a new feature in TWRP that detects if the system partition has ever been mounted read/write. If not, you will be prompted asking if you want TWRP to mount system as read/write. If you choose not to allow TWRP to mount as read/write, TWRP won’t prompt to install SuperSU and TWRP won’t try to patch the stock ROM to prevent TWRP from being replaced by stock recovery. The goal of this option is to hopefully allow the user to make a raw system image backup that they can use to get back to a state where they can take OTA updates again.

    resize2fs feature: On some devices like the Nexus 6, the factory images include a userdata image that is the proper size only for the 32GB units. If you flash the factory image to a 64GB Nexus 6, the data partition will appear as if it only has the free space of a 32GB device. Using the resize2fs option, TWRP can resize your data partition to take up the full space available. The resize2fs may also be useful to resize system partitions on devices where custom ROM system images don’t take up the full partition space. Lastly, resize2fs may be useful in some cases to reserve the proper space at the end of a data partition for a full disk encryption key, should your partition be formatted incorrectly for some reason.

    This new version also marks our first set of full builds using our new jenkins build server. You can track the progress of builds at https://jenkins.twrp.me and we have taken additional steps to make it easier for device maintainers to step up and submit patches to our gerrit server at https://gerrit.twrp.me to help us keep devices up to date and working.

    Bugs:

    * Not that a bugs :) Really stable


    Download's Lİnk

    ZUK Edge [OFFICIAL] TWRP 3.1.1.0.zip [16.9*MB]

    Special Thanks:

    z2-dev developer teams

    @bigbiff for official bring up



    XDA:DevDB Information
    [OFFICIAL] TWRP 3.1.1.0 for ZUK Edge , ROM for the Lenovo Zuk Edge

    Contributors
    kaankulahli
    Source Code: https://github.com/z2x-dev

    ROM OS Version: 7.x Nougat
    ROM Kernel: Linux 3.10.x
    Based On: Omni

    Version Information
    Status: Stable
    Current Stable Version: 1.0

    Created 2017-09-29
    Last Updated 2017-09-29
    1
    Will there be a release which can deal with OREO soon? Just flashed new OreoUpdate and can no longer access partitions via TWRP.