• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!
  • Fill out your device list and let everyone know which phones you have!    Edit Your Device Inventory

[OFFICIAL] TWRP 3 for Samsung Galaxy Core Plus (SM-G350)

Search This thread

TimSchumi

Senior Member
Mar 9, 2016
873
396
19
Code:
#include <std_disclaimer.h> 
/*
 * Your warranty is now void.
 *
 * I am not responsible for bricked devices, dead SD cards,
 * thermonuclear war, or you getting fired because the alarm app failed. Please
 * do some research if you have any concerns about features included in this ROM
 * before flashing it! YOU are choosing to make these modifications, and if
 * you point the finger at me for messing up your device, I will laugh at you.
 *
 * DO NOT LEECH MY DOWNLOADS, PLEASE RE-DIRECT YOUR FORUM/PAGE 
 * TO THIS THREAD, IF YOU LIKE MY WORK, YOU CAN SAY THANKS
 */

Introduction
This is TWRP 3 for the Samsung Galaxy Core Plus (SM-G350) aka cs02
This should be ready to use!

Changelog
22-10-2017:
There is now an official TWRP available on the TeamWin page:
The unofficial thread and files will be kept in case anyone wants to rollback.
You ARE ALLOWED to report stuff about the official builds as well as the unofficial builds here.


22-05-2017:
  • TWRP 3.1.1-0 upstream changes
  • Kernel is now built with arm-eabi-4.8 (Commits)
  • This is now built from TeamWin's official sources, until we get official builds (New source is here)

28-04-2017:
  • Fixed SELinux (fixed magically, so I can't present a commit. May have been fixed since the last build, but didn't work until now)

09-04-2017:
  • TWRP 3.1.0-0 upstream changes
  • Fixed wiping partitions (commit)

24-11-2016:
  • Set the Setting for doing "rm -rf" instead of formatting as default (commit)

21-11-2016:
  • Bringup


Installation Instructions

Requirements
  • A computer with Administrator/root privileges
  • A network connection
  • Your phone charged to at least 50%

Instructions for Windows
  1. Download Samsung's ODIN and the .tar image from the 'Downloads' section
  2. Extract ODIN and open it using your Administrator privileges
  3. Add the .tar file into the 'AP' field
  4. Put your device into Download mode by holding [Vol-] and [Home] while powering on the device
  5. Confirm the prompt on the display by pressing [Vol+] once
  6. Connect your phone to your computer
  7. Press 'Start' and wait until it shows 'PASS'
  8. If you are on the stock OS, immeadiately reboot into the recovery by holding [Vol+] and [Home] while the device reboots

Instructions for macOS/Linux
  1. Install Heimdall through homebrew/[your package manager]/compiling
  2. Download the .img file from the 'Downloads' section
  3. Put your device into Download mode by holding [Vol-] and [Home] while powering on the device
  4. Confirm the prompt on the display by pressing [Vol+] once
  5. Connect your phone to your computer
  6. Open your terminal and execute the following command:
    Code:
    heimdall flash --RECOVERY twrp-cs02-x.x.x-x-xxxxxxxx.img
  7. If you are on the stock OS, immeadiately reboot into the recovery by holding [Vol+] and [Home] while the device reboots



Downloads
Samsung USB Drivers
Odin v3.09
Odin v3.11.1
twrp-cs02-3.1.1-0-20170512.tar
twrp-cs02-3.1.1-0-20170512.img

Thanks To/Credits
Thanks to @santeri3700 and @berkantkz for teaching me the basics of ROM Development and helping me with Errors

XDA:DevDB Information
TWRP 3 for Samsung Galaxy Core Plus (SM-G350), Tool/Utility for all devices (see above for details)

Contributors
TimSchumi
Source Code: https://github.com/TeamWin?q=cs02


Version Information
Status: Stable
Current Stable Version: 3.1.1-0
Stable Release Date: 2017-05-12

Created 2016-11-21
Last Updated 2020-09-13
 

TimSchumi

Senior Member
Mar 9, 2016
873
396
19
Quick Update:

I now know what is causing the issues with non-block-based zip files. The Recovery does not have SELinux support by now, which would provide the metadata command it is complaining about. I will try to add in SELinux support and then release TWRP 3.1.0-0 with full flashing capability
 
  • Like
Reactions: paulo boë

TimSchumi

Senior Member
Mar 9, 2016
873
396
19
It seems that I have the wiping gotten to work. Only SELinux remaining and I could make it official :p

Probably a new build will come?

EDIT: New build of TWRP 3.1.0-0 with fixed wiping is up!
 
Last edited:

TimSchumi

Senior Member
Mar 9, 2016
873
396
19
A working build of TWRP is now available on the TeamWin Download Page (https://twrp.me/samsung/samsunggalaxycoreplus.html). I'll keep the old TWRP images here so you can revert if you experience any problems. I'll sooner or later mark this thread as official, too.

Note: You are allowed to report bugs or anything else about the unofficial images as well as the official images in this thread (Because I don't want to maintain a seperate thread).
 
Last edited:
A working build of TWRP is now available on the TeamWin Download Page (https://twrp.me/samsung/samsunggalaxycoreplus.html). I'll keep the old TWRP images here so you can revert if you experience any problems. I'll sooner or later mark this thread as official, too.

Note: You are allowed to report bugs or anything else about the unofficial images as well as the official images in this thread (Because I don't want to maintain a seperate thread).
Thanks.
 

Nasher_87-ARG-

New member
May 25, 2018
4
0
Ramos Mejía
It does not work for me, I do not know what happens

Code:
#include <std_disclaimer.h> 
/*
 * Your warranty is now void.
 *
 * I am not responsible for bricked devices, dead SD cards,
 * thermonuclear war, or you getting fired because the alarm app failed. Please
 * do some research if you have any concerns about features included in this ROM
 * before flashing it! YOU are choosing to make these modifications, and if
 * you point the finger at me for messing up your device, I will laugh at you.
 *
 * DO NOT LEECH MY DOWNLOADS, PLEASE RE-DIRECT YOUR FORUM/PAGE 
 * TO THIS THREAD, IF YOU LIKE MY WORK, YOU CAN SAY THANKS
 */

Introduction
This is TWRP 3 for the Samsung Galaxy Core Plus (SM-G350) aka cs02
This should be ready to use!

Changelog
22-10-2017:
There is now an official TWRP available on the TeamWin page:
The unofficial thread and files will be kept in case anyone wants to rollback.
You ARE ALLOWED to report stuff about the official builds as well as the unofficial builds here.


22-05-2017:
  • TWRP 3.1.1-0 upstream changes
  • Kernel is now built with arm-eabi-4.8 (Commits)
  • This is now built from TeamWin's official sources, until we get official builds (New source is here)

28-04-2017:
  • Fixed SELinux (fixed magically, so I can't present a commit. May have been fixed since the last build, but didn't work until now)

09-04-2017:
  • TWRP 3.1.0-0 upstream changes
  • Fixed wiping partitions (commit)

24-11-2016:
  • Set the Setting for doing "rm -rf" instead of formatting as default (commit)

21-11-2016:
  • Bringup


Installation Instructions

Requirements
  • A computer with Administrator/root privileges
  • A network connection
  • Your phone charged to at least 50%

Instructions for Windows
  1. Download Samsung's ODIN and the .tar image from the 'Downloads' section
  2. Extract ODIN and open it using your Administrator privileges
  3. Add the .tar file into the 'AP' field
  4. Put your device into Download mode by holding [Vol-] and [Home] while powering on the device
  5. Confirm the prompt on the display by pressing [Vol+] once
  6. Connect your phone to your computer
  7. Press 'Start' and wait until it shows 'PASS'
  8. If you are on the stock OS, immeadiately reboot into the recovery by holding [Vol+] and [Home] while the device reboots

Instructions for macOS/Linux
  1. Install Heimdall through homebrew/[your package manager]/compiling
  2. Download the .img file from the 'Downloads' section
  3. Put your device into Download mode by holding [Vol-] and [Home] while powering on the device
  4. Confirm the prompt on the display by pressing [Vol+] once
  5. Connect your phone to your computer
  6. Open your terminal and execute the following command:
    Code:
    heimdall flash --RECOVERY twrp-cs02-x.x.x-x-xxxxxxxx.img
  7. If you are on the stock OS, immeadiately reboot into the recovery by holding [Vol+] and [Home] while the device reboots



Downloads
Samsung USB Drivers
Odin v3.09
Odin v3.11.1
twrp-cs02-3.1.1-0-20170512.tar (Primary, Mirror)
twrp-cs02-3.1.1-0-20170512.img (Primary, Mirror)

Thanks To/Credits
Thanks to @santeri3700 and @berkantkz for teaching me the basics of ROM Development and helping me with Errors

XDA:DevDB Information
TWRP 3 for Samsung Galaxy Core Plus (SM-G350), Tool/Utility for all devices (see above for details)

Contributors
TimSchumi
Source Code: https://github.com/TeamWin?q=cs02


Version Information
Status: Stable
Current Stable Version: 3.1.1-0
Stable Release Date: 2017-05-12

Created 2016-11-21
Last Updated 2018-03-26

When I perform the steps, load but give error, look:
Code:
heimdall flash --RECOVERY twrp-cs02-3.1.1-0-20170512.imgHeimdall v1.4.1

Copyright (c) 2010-2014 Benjamin Dobell, Glass Echidna
http://www.glassechidna.com.au/

This software is provided free of charge. Copying and redistribution is
encouraged.

If you appreciate this software and you would like to support future
development please consider donating:
http://www.glassechidna.com.au/donate/

Initialising connection...
Detecting device...
Claiming interface...
Setting up interface...

Initialising protocol...
Protocol initialisation successful.

Beginning session...

Some devices may take up to 2 minutes to respond.
Please be patient!

Session begun.

Downloading device's PIT file...
ERROR: Failed to receive PIT file part #16!
ERROR: Failed to download PIT file!
Ending session...
Rebooting device...
ERROR: Failed to receive reboot confirmation!
Releasing device interface...
 

TimSchumi

Senior Member
Mar 9, 2016
873
396
19
Introduction
This is TWRP 3 for the Samsung Galaxy Core Plus (SM-G350) aka cs02
This should be ready to use!

Changelog
22-10-2017:
There is now an official TWRP available on the TeamWin page:
The unofficial thread and files will be kept in case anyone wants to rollback.
You ARE ALLOWED to report stuff about the official builds as well as the unofficial builds here.


22-05-2017:
TWRP 3.1.1-0 upstream changes
Kernel is now built with arm-eabi-4.8 (Commits)
This is now built from TeamWin's official sources, until we get official builds (New source is here)


28-04-2017:
Fixed SELinux (fixed magically, so I can't present a commit. May have been fixed since the last build, but didn't work until now)


09-04-2017:
TWRP 3.1.0-0 upstream changes
Fixed wiping partitions (commit)


24-11-2016:
Set the Setting for doing "rm -rf" instead of formatting as default (commit)


21-11-2016:
Bringup



Installation Instructions

Requirements
A computer with Administrator/root privileges
A network connection
Your phone charged to at least 50%


Instructions for Windows
Download Samsung's ODIN and the .tar image from the 'Downloads' section
Extract ODIN and open it using your Administrator privileges
Add the .tar file into the 'AP' field
Put your device into Download mode by holding [Vol-] and [Home] while powering on the device
Confirm the prompt on the display by pressing [Vol+] once
Connect your phone to your computer
Press 'Start' and wait until it shows 'PASS'
If you are on the stock OS, immeadiately reboot into the recovery by holding [Vol+] and [Home] while the device reboots


Instructions for macOS/Linux
Install Heimdall through homebrew/[your package manager]/compiling
Download the .img file from the 'Downloads' section
Put your device into Download mode by holding [Vol-] and [Home] while powering on the device
Confirm the prompt on the display by pressing [Vol+] once
Connect your phone to your computer
Open your terminal and execute the following command:


When I perform the steps, load but give error, look:


1. Try a newer version of Heimdall
2. Checked the cable? Maybe try a different one.
3. Run Heimdall as administrator/root.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 6
    Code:
    #include <std_disclaimer.h> 
    /*
     * Your warranty is now void.
     *
     * I am not responsible for bricked devices, dead SD cards,
     * thermonuclear war, or you getting fired because the alarm app failed. Please
     * do some research if you have any concerns about features included in this ROM
     * before flashing it! YOU are choosing to make these modifications, and if
     * you point the finger at me for messing up your device, I will laugh at you.
     *
     * DO NOT LEECH MY DOWNLOADS, PLEASE RE-DIRECT YOUR FORUM/PAGE 
     * TO THIS THREAD, IF YOU LIKE MY WORK, YOU CAN SAY THANKS
     */

    Introduction
    This is TWRP 3 for the Samsung Galaxy Core Plus (SM-G350) aka cs02
    This should be ready to use!

    Changelog
    22-10-2017:
    There is now an official TWRP available on the TeamWin page:
    The unofficial thread and files will be kept in case anyone wants to rollback.
    You ARE ALLOWED to report stuff about the official builds as well as the unofficial builds here.


    22-05-2017:
    • TWRP 3.1.1-0 upstream changes
    • Kernel is now built with arm-eabi-4.8 (Commits)
    • This is now built from TeamWin's official sources, until we get official builds (New source is here)

    28-04-2017:
    • Fixed SELinux (fixed magically, so I can't present a commit. May have been fixed since the last build, but didn't work until now)

    09-04-2017:
    • TWRP 3.1.0-0 upstream changes
    • Fixed wiping partitions (commit)

    24-11-2016:
    • Set the Setting for doing "rm -rf" instead of formatting as default (commit)

    21-11-2016:
    • Bringup


    Installation Instructions

    Requirements
    • A computer with Administrator/root privileges
    • A network connection
    • Your phone charged to at least 50%

    Instructions for Windows
    1. Download Samsung's ODIN and the .tar image from the 'Downloads' section
    2. Extract ODIN and open it using your Administrator privileges
    3. Add the .tar file into the 'AP' field
    4. Put your device into Download mode by holding [Vol-] and [Home] while powering on the device
    5. Confirm the prompt on the display by pressing [Vol+] once
    6. Connect your phone to your computer
    7. Press 'Start' and wait until it shows 'PASS'
    8. If you are on the stock OS, immeadiately reboot into the recovery by holding [Vol+] and [Home] while the device reboots

    Instructions for macOS/Linux
    1. Install Heimdall through homebrew/[your package manager]/compiling
    2. Download the .img file from the 'Downloads' section
    3. Put your device into Download mode by holding [Vol-] and [Home] while powering on the device
    4. Confirm the prompt on the display by pressing [Vol+] once
    5. Connect your phone to your computer
    6. Open your terminal and execute the following command:
      Code:
      heimdall flash --RECOVERY twrp-cs02-x.x.x-x-xxxxxxxx.img
    7. If you are on the stock OS, immeadiately reboot into the recovery by holding [Vol+] and [Home] while the device reboots



    Downloads
    Samsung USB Drivers
    Odin v3.09
    Odin v3.11.1
    twrp-cs02-3.1.1-0-20170512.tar
    twrp-cs02-3.1.1-0-20170512.img

    Thanks To/Credits
    Thanks to @santeri3700 and @berkantkz for teaching me the basics of ROM Development and helping me with Errors

    XDA:DevDB Information
    TWRP 3 for Samsung Galaxy Core Plus (SM-G350), Tool/Utility for all devices (see above for details)

    Contributors
    TimSchumi
    Source Code: https://github.com/TeamWin?q=cs02


    Version Information
    Status: Stable
    Current Stable Version: 3.1.1-0
    Stable Release Date: 2017-05-12

    Created 2016-11-21
    Last Updated 2020-09-13
    3
    A working build of TWRP is now available on the TeamWin Download Page (https://twrp.me/samsung/samsunggalaxycoreplus.html). I'll keep the old TWRP images here so you can revert if you experience any problems. I'll sooner or later mark this thread as official, too.

    Note: You are allowed to report bugs or anything else about the unofficial images as well as the official images in this thread (Because I don't want to maintain a seperate thread).
    2
    It seems that I have the wiping gotten to work. Only SELinux remaining and I could make it official :p

    Probably a new build will come?

    EDIT: New build of TWRP 3.1.0-0 with fixed wiping is up!
    1
    Quick Update:

    I now know what is causing the issues with non-block-based zip files. The Recovery does not have SELinux support by now, which would provide the metadata command it is complaining about. I will try to add in SELinux support and then release TWRP 3.1.0-0 with full flashing capability
    1
    is it flashable with rashr?

    edit: yes it is.