Oh, no! I have bricked my TS! Please, help!

[huelvy]

I think I have bricked my truesmart. During the process of flashing a ROM, flash tool stopped it and showed an error message (I don´t remember which). After that, the watch doesn´t turn on. I tried to flash again several ROMs, but I think the computer doesn´t connect correctly to the watch. I have tried several things, but nothing works.

As abstract, this is what i have done:

- I have uninstalled TS drivers and restarted the computer (W7 64)
- Installed TS drivers again
- restarted the computer
- unplug and plugged the Truesmart´s battery (so, it is off)
- connected the TS to the computer. The PC detects it as "Mediatek USB VCOM (Android)" and intalls it correctly. BUT, after 5 or 6 seconds, it sounds like the watch is disconnected.
- unplugged TS
- restarted the computer
- unplug and plugged the Truesmart´s battery again
- run flash tool as admin
- selected "scatter-loading" and the scatter archive
- "download" (I have tried using all options: download only, firmware update...)
- connect TS to the computer
- the computer sounds as the conection is established, but after 5 or 6 seconds, again, sounds like the watch is unplugged
- I can wait for minuts and minuts, but nothing else happens.

I attach a screenshot of flash tool and the log archives.

Please, help me!

 

[funky0308]

Try to start flashing without device and connect device (in flash mode) when flashtool ask for it.

...but..it's not good when flashing broke in half of the proces
Sent from my C6903 using Tapatalk

 

[Lokifish Marz]

You should post you issues in the thread for the guide you were following instead of making a whole new thread. Otherwise any solutions or fixes in this thread need to be copied over to the thread for the guide that you used.

 

[huelvy]

Try to start flashing without device and connect device (in flash mode) when flashtool ask for it.

...but..it's not good when flashing broke in half of the proces
Sent from my C6903 using Tapatalk

The watch doesn´t react to anything. The only thing I get is a short connection to the computer, as I have described.

You should post you issues in the thread for the guide you were following instead of making a whole new thread. Otherwise any solutions or fixes in this thread need to be copied over to the thread for the guide that you used.

You´re right. Sorry. I´ll move to:

[GUIDE] How to "UnBrick/Return to Stock" your Omate TrueSmart Watch x201
http://forum.xda-developers.com/showthread.php?p=50814638


To moderators: please, close this thread.