Onda V972 Allwinner A31 Quad Core 9.7inch Retina IPS Screen Dual Camera Tablet PC

[Dan Law 001]

I bought this one:

http://www.aliexpress.com/snapshot/269153162.html

3x cheaper. 8 hrs with 4.2.2. Less with 4.4 as others already mentioned.

Sent from my V972 Core4 using XDA Premium HD app

Thanks, but to bad, I underclocked it and I can get the same result.


Sent from my V971 Core4 using XDA Premium 4 mobile app

 

[bdjh]

Thanks, but to bad, I underclocked it and I can get the same result.


Sent from my V971 Core4 using XDA Premium 4 mobile app

My tablet is running at maximum clock rate, and then thus for ~8 hrs on 4.2.2.

 

[stevieo63]

onda v972 speakers fried by app

Hi,
I have an Onda v972 running 4.2.2 on firmware build v3.2_v2.
I downloaded an app called Boost Your Volume by Bresaconggul. WRONG MOVE.
When I ran the app to calibrate it, (a progressively loud screech and a phone ringing noise), my speakers started crackling.
I began to play a song, and the entire thing was distorted. Same thing happened when I played a movie (on various players) or a game.
Any audio file I open, or program with audio, is now distorted. The only way to get rid of the distortion is to turn the volume almost all the way off.
Volume through the ear buds is fine; no distortion and full volume there.
I downloaded an equalizer, and as long as I have 60hz and 23hz well below 0, there's no distortion, but the overall volume is still too low.
Are my external speakers permanently fried? If I reflash the OS, will the sound be restored?
Any suggestions? Please?
Thanks.

---------- Post added at 12:46 PM ---------- Previous post was at 12:40 PM ----------

Hi,
I have an Onda v972 running 4.2.2 on firmware build v3.2_v2.
I downloaded an app called Boost Your Volume by Bresaconggul. WRONG MOVE.
When I ran the app to calibrate it, (a progressively loud screech and a phone ringing noise), my speakers started crackling.
I began to play a song, and the entire thing was distorted. Same thing happened when I played a movie (on various players) or a game.
Any audio file I open, or program with audio, is now distorted. The only way to get rid of the distortion is to turn the volume almost all the way off.
Volume through the ear buds is fine; no distortion and full volume there.
I downloaded an equalizer, and as long as I have 60hz and 23hz well below 0, there's no distortion, but the overall volume is still too low.
Are my external speakers permanently fried? If I reflash the OS, will the sound be restored?
Any suggestions? Please?
Thanks.

---------- Post added at 12:53 PM ---------- Previous post was at 12:46 PM ----------

Hi,
I have an Onda v972 running 4.2.2 on firmware build v3.2_v2.
I downloaded an app called Boost Your Volume by Bresaconggul. WRONG MOVE.
When I ran the app to calibrate it, (a progressively loud screech and a phone ringing noise), my speakers started crackling.
I began to play a song, and the entire thing was distorted. Same thing happened when I played a movie (on various players) or a game.
Any audio file I open, or program with audio, is now distorted. The only way to get rid of the distortion is to turn the volume almost all the way off.
Volume through the ear buds is fine; no distortion and full volume there.
I downloaded an equalizer, and as long as I have 60hz and 23hz well below 0, there's no distortion, but the overall volume is still too low.
Are my external speakers permanently fried? If I reflash the OS, will the sound be restored?
Any suggestions? Please?
Thanks.

 

[reksden]

onda allwiner a31

this is good tablet pc

 

[msav]

Hi,
I have an Onda v972 running 4.2.2 on firmware build v3.2_v2.
I downloaded an app called Boost Your Volume by Bresaconggul. WRONG MOVE.
When I ran the app to calibrate it, (a progressively loud screech and a phone ringing noise), my speakers started crackling.
I began to play a song, and the entire thing was distorted. Same thing happened when I played a movie (on various players) or a game.
Any audio file I open, or program with audio, is now distorted. The only way to get rid of the distortion is to turn the volume almost all the way off.
Volume through the ear buds is fine; no distortion and full volume there.
I downloaded an equalizer, and as long as I have 60hz and 23hz well below 0, there's no distortion, but the overall volume is still too low.
Are my external speakers permanently fried? If I reflash the OS, will the sound be restored?
Any suggestions? Please?
Thanks.

---------- Post added at 12:46 PM ---------- Previous post was at 12:40 PM ----------

Hi,
I have an Onda v972 running 4.2.2 on firmware build v3.2_v2.
I downloaded an app called Boost Your Volume by Bresaconggul. WRONG MOVE.
When I ran the app to calibrate it, (a progressively loud screech and a phone ringing noise), my speakers started crackling.
I began to play a song, and the entire thing was distorted. Same thing happened when I played a movie (on various players) or a game.
Any audio file I open, or program with audio, is now distorted. The only way to get rid of the distortion is to turn the volume almost all the way off.
Volume through the ear buds is fine; no distortion and full volume there.
I downloaded an equalizer, and as long as I have 60hz and 23hz well below 0, there's no distortion, but the overall volume is still too low.
Are my external speakers permanently fried? If I reflash the OS, will the sound be restored?
Any suggestions? Please?
Thanks.

---------- Post added at 12:53 PM ---------- Previous post was at 12:46 PM ----------

Hi,
I have an Onda v972 running 4.2.2 on firmware build v3.2_v2.
I downloaded an app called Boost Your Volume by Bresaconggul. WRONG MOVE.
When I ran the app to calibrate it, (a progressively loud screech and a phone ringing noise), my speakers started crackling.
I began to play a song, and the entire thing was distorted. Same thing happened when I played a movie (on various players) or a game.
Any audio file I open, or program with audio, is now distorted. The only way to get rid of the distortion is to turn the volume almost all the way off.
Volume through the ear buds is fine; no distortion and full volume there.
I downloaded an equalizer, and as long as I have 60hz and 23hz well below 0, there's no distortion, but the overall volume is still too low.
Are my external speakers permanently fried? If I reflash the OS, will the sound be restored?
Any suggestions? Please?
Thanks.

Sorry to say your speaker is fried. My friend had the same issue with his v972. I swapped the speaker in his tablet and it was then fine. these speakers are weak and can be easily blown.

 

[stevieo63]

speakers

Sorry to say your speaker is fried. My friend had the same issue with his v972. I swapped the speaker in his tablet and it was then fine. these speakers are weak and can be easily blown.

what speakers did you swap for the defective ones? and was it fairly easy? i'm not that tech savvy, but I might be able to with the right equipment and the right instructions.

 

[felipao_shermam]

onda v972 bricked after error during update firmware

Hello, I tried to update my tablet ONDA v972, but an error occurred during the phoenixsuit process. Now the tablet not turn on, it is bricked. Please any help is welcome.

 

[msav]

Hi,
I have an Onda v972 running 4.2.2 on firmware build v3.2_v2.
I downloaded an app called Boost Your Volume by Bresaconggul. WRONG MOVE.
When I ran the app to calibrate it, (a progressively loud screech and a phone ringing noise), my speakers started crackling.
I began to play a song, and the entire thing was distorted. Same thing happened when I played a movie (on various players) or a game.
Any audio file I open, or program with audio, is now distorted. The only way to get rid of the distortion is to turn the volume almost all the way off.
Volume through the ear buds is fine; no distortion and full volume there.
I downloaded an equalizer, and as long as I have 60hz and 23hz well below 0, there's no distortion, but the overall volume is still too low.
Are my external speakers permanently fried? If I reflash the OS, will the sound be restored?
Any suggestions? Please?
Thanks.

---------- Post added at 12:46 PM ---------- Previous post was at 12:40 PM ----------

Hi,
I have an Onda v972 running 4.2.2 on firmware build v3.2_v2.
I downloaded an app called Boost Your Volume by Bresaconggul. WRONG MOVE.
When I ran the app to calibrate it, (a progressively loud screech and a phone ringing noise), my speakers started crackling.
I began to play a song, and the entire thing was distorted. Same thing happened when I played a movie (on various players) or a game.
Any audio file I open, or program with audio, is now distorted. The only way to get rid of the distortion is to turn the volume almost all the way off.
Volume through the ear buds is fine; no distortion and full volume there.
I downloaded an equalizer, and as long as I have 60hz and 23hz well below 0, there's no distortion, but the overall volume is still too low.
Are my external speakers permanently fried? If I reflash the OS, will the sound be restored?
Any suggestions? Please?
Thanks.

---------- Post added at 12:53 PM ---------- Previous post was at 12:46 PM ----------

Hi,
I have an Onda v972 running 4.2.2 on firmware build v3.2_v2.
I downloaded an app called Boost Your Volume by Bresaconggul. WRONG MOVE.
When I ran the app to calibrate it, (a progressively loud screech and a phone ringing noise), my speakers started crackling.
I began to play a song, and the entire thing was distorted. Same thing happened when I played a movie (on various players) or a game.
Any audio file I open, or program with audio, is now distorted. The only way to get rid of the distortion is to turn the volume almost all the way off.
Volume through the ear buds is fine; no distortion and full volume there.
I downloaded an equalizer, and as long as I have 60hz and 23hz well below 0, there's no distortion, but the overall volume is still too low.
Are my external speakers permanently fried? If I reflash the OS, will the sound be restored?
Any suggestions? Please?
Thanks.

what speakers did you swap for the defective ones? and was it fairly easy? i'm not that tech savvy, but I might be able to with the right equipment and the right instructions.

I bought one on ebay with a fried motherboard. I used the speaker out of the fried one to fix his. I do not know of any compatible replacement sorry.

 

[EvangelineX]

Where can I download the Onda v975m firmware.

 

[watusi]

try this site....www.onda-tablet.com

---------- Post added at 10:25 AM ---------- Previous post was at 10:19 AM ----------

who try this one kitkat version...

http://www.onda-tablet.com/news/onda-v972-android-kitkat-firmware-beta-download

---------- Post added at 10:32 AM ---------- Previous post was at 10:25 AM ----------

other forum...

kitkat version


http://www.slatedroid.com/topic/99690-update-2jan2014-v972-v1-rom-442-kitkat-rooted/

 

[Krevar]

Kit Kat for V2 Hardware!

Hello everyone, good news for Onda V972 V2 owners! i didn't expected it anymore, but here is it: The Android KitKat Update for V2 hardware! Pre-rooted! It's available on Arctablet.com, go and see (not allowed post the link here)
Enjoy!

 

[nm10721]

Archos Platinum 97 HD

Hi,

I have the above tablet which is rooted and has CM11 installed.

Over the last few days its developed a fault whereby the touchscreen buttons flash randomly and the screen goes daft. Occassionally the screen functions normally for a few minutes but then goes nuts again. Overclockers UK have refused a repair due to rooting it.

Does anyone know what this problem is likely to be before I stump up more cash for a new digitizer from aliexpress. I already have a replacement LG battery waiting to be fitted to boost the woeful battery life which seems like a waste of money now.

I'm kind of hoping it might be swollen battery pushing the screen which means I dont need to spend any money on it. I've tried several different roms so it doesnt appear to be software related.

Anyone any ideas??

thanks

 

[whiteallpe7]

awesome :good:

 

[nm10721]

Archos Platinum 97 HD

Anyone??? pretty please

 

[^andrea^]

Regarding sending it back, vendors often use the fact that the tablet has been rooted as an excuse for not repairing/replacing it.
This is unfair, above all when you don't have to unlock the bootloader or modify permanently anything else, like with the Onda v972.

As far as I know, you should be able to restore the original firmware.
I would have contacted the seller after having restored the tablet back to its original firmware.

Anyway, at this stage I suppose you can restore the tablet to original and then if you still experience the same problem try to contact them again.

Do you always experience this problem or only when you are charging the tablet?
For me the screen goes a bit mad when the tablet is plugged it. To make it stop I have to touch the back ot the tablet with my hand.
Some electric **** is going on there... :-/


Good Luck!
Andrea

Hi,

I have the above tablet which is rooted and has CM11 installed.

Over the last few days its developed a fault whereby the touchscreen buttons flash randomly and the screen goes daft. Occassionally the screen functions normally for a few minutes but then goes nuts again. Overclockers UK have refused a repair due to rooting it.

Does anyone know what this problem is likely to be before I stump up more cash for a new digitizer from aliexpress. I already have a replacement LG battery waiting to be fitted to boost the woeful battery life which seems like a waste of money now.

I'm kind of hoping it might be swollen battery pushing the screen which means I dont need to spend any money on it. I've tried several different roms so it doesnt appear to be software related.

Anyone any ideas??

thanks

 

[nm10721]

Thanks for the replying. The problem is I COULDN'T restore it back to the Archos firmware as you can't get it ANYWHERE. It goes haywire even when it's not plugged in. I've got the upgraded LG battery at home which arrived from China. I'm gonna fit that when the tablet arrives back on Monday and see if that helps things. If not I'm gonna order a new digitizer from ali express

Sent from my SM-N9005 using XDA Free mobile app

 

[Traprock]

Thanks for the replying. The problem is I COULDN'T restore it back to the Archos firmware as you can't get it ANYWHERE. It goes haywire even when it's not plugged in. I've got the upgraded LG battery at home which arrived from China. I'm gonna fit that when the tablet arrives back on Monday and see if that helps things. If not I'm gonna order a new digitizer from ali express

Sent from my SM-N9005 using XDA Free mobile app

nm,
any progress reports very appreciated. My v972 lost wifi a week ago, now my display is playing up. Some parts of the screen not touch responsive, I have to rotate to get touch to work a specific icon. The unit does a berserker every so often and runs though its own random sequence of touch responses, without my input. I am also waiting on a new battery. Firmware up and downgrades haven't helped.

 

[nm10721]

I should get the tablet back today and will fit the battery tonight hopefully. In any case I will report back here to see if it makes any difference. I suspect it won't and I'll have to buy a digitizer

Sent from my SM-N9005 using XDA Free mobile app

 

[nm10721]

I should get the tablet back today and will fit the battery tonight hopefully. In any case I will report back here to see if it makes any difference. I suspect it won't and I'll have to buy a digitizer

Sent from my SM-N9005 using XDA Free mobile app

Well I fitted the new battery and the screen is still playing up although at one point it seemed ok then went tits up again. Then I broke the screen whilst opening and shutting the case trying to make the battery fit. Not too bothered about that though as I obviously need a new digitizer in any case. Ive just ordered one from seller cui1873 on ebay. Couldnt post the link sorry

 

[Traprock]

Well I fitted the new battery and the screen is still playing up although at one point it seemed ok then went tits up again. Then I broke the screen whilst opening and shutting the case trying to make the battery fit. Not too bothered about that though as I obviously need a new digitizer in any case. Ive just ordered one from seller cui1873 on ebay. Couldnt post the link sorry

nm,

thanks for the update. Bugger on the broken screen. I snapped my ext sd card, in spite of all the warnings. So my next bit of self-education is learning what a digitizer is. Let us know how it goes for you.

Traprock