General Oneplus 10 Pro Global Rom India / eu

Search This thread

Canuck Knarf

Senior Member
Dec 19, 2015
271
47
Google Pixel 6 Pro
OnePlus 10 Pro
i rolled back to oxgen 12 global , isnt it ? and downlod colors os 13 , but how to update now , i added in root directory but i cant find by locl update apk
I posted oxygen udater here. See if that will help you get back to color OS .
You can do through fastboot as well ...but you need to get boot img...Vender boot img and Vbmeta img

 
Last edited:

MsuatafaKhatab

Senior Member
Sep 15, 2013
552
23
Xiaomi Poco F3
OnePlus 10 Pro
I posted oxygen udater here. See if that will help you get back to color OS .
You can do through fastboot as well ...but you need to get boot img...Vender boot img and Vbmeta img

sorry , i still newbie , is there vedio for that .
 

Canuck Knarf

Senior Member
Dec 19, 2015
271
47
Google Pixel 6 Pro
OnePlus 10 Pro

saqibmobile

Member
Mar 30, 2010
16
0
Need help

baseband unknown imei null null i flashed Oxygen OS 12.1 A13 GLO full OTA.zip

My device Ne2210 colorOs 13 previous version
 

saqibmobile

Member
Mar 30, 2010
16
0
bro my NE2210 was chinese i flashed payload global version this one Oxygen OS 12.1 A13 GLO full OTA.zip

But my mistake is that i write payload with disable unknown partition warning in bootloader fastboot mode..... which cause chinese modem replaced with global one and my baseband unknown....

i checked fastbootd mode modem writing keep skip....

So i need chinese NE2210 modem
 

dladz

Senior Member
Aug 24, 2010
14,986
5,314
Liverpool
Huawei Watch 2
OnePlus 10 Pro
bro my NE2210 was chinese i flashed payload global version this one Oxygen OS 12.1 A13 GLO full OTA.zip

But my mistake is that i write payload with disable unknown partition warning in bootloader fastboot mode..... which cause chinese modem replaced with global one and my baseband unknown....

i checked fastbootd mode modem writing keep skip....

So i need chinese NE2210 modem
Should have just used the rollback package using the the local system install APK.

Maybe a bit late now
 

Deviatorz

Senior Member
Oct 29, 2010
142
4
I installed oxygenOS 13 on the chinese varient but it keeps on looping into optimizing apps and has this error message "org.codeaurora.ims.imsapp keeps stopping"
 

Deviatorz

Senior Member
Oct 29, 2010
142
4
Maybe the Chinese side of things trying to push Chinese apps back on the device. Try a safe boot then adb uninstall them.

Or a factory wipe from safe mode.
Yup I just did that. Thanks for the reply.

Just FYI for others: Factory Reset/Wipe option will not work. Use Fastboot enhanced or whatever ABD cmd program to relock bootloader --> leads to wiping of your device.

I guess if you plan to root then probably have to wipe anyways so you could skip that step.

I will not be rooting as this phone is for a family member and root is not needed (need to use banking apps).
 
Last edited:

MsuatafaKhatab

Senior Member
Sep 15, 2013
552
23
Xiaomi Poco F3
OnePlus 10 Pro
is this ok to flash i like , my phone hard brick 2 times before

1667232859962.png


i got this message


1667232919513.png
 

Attachments

  • 1667232191268.png
    1667232191268.png
    44.9 KB · Views: 27

thererick

New member
Nov 7, 2022
2
0
dear gurus, need help.

I was following this guide and i am pretty much stuck at Step 8 point 5. In fact, i think i screwed up badly as my 10 pro is now stuck at the boot screen where you see the android logo, none-stop rebooting.

I am now still able to reach the Fastbootd Mode via Fastbood Enhance. To be precise, i am stuck at the step where:
1. Fastboot Enhance > Payload Dumper > selected payload.bin
2. Fastboot Visualization > Basic Properties > Click on Flash payload.bin > pop up window


1667830037135.png
 

Top Liked Posts

  • There are no posts matching your filters.
  • 11
    Can you guide me how to do it? I never did this flashing.
    1. install ADB 1.4.3 drivers on your PC
    2. also you would need the zip fille of the OP10pro Rom , fastboot enhance
    3. enable OEM unlock and USB debugging on phone
    4. connect phone to PC
    5. in the adb folder on the PC which usually is in c drive shift + right click in empty space and open powershell window
    6. check status of device using command " adb devices "
    7. then "adb reboot bootloader" now phone will go into bootloader
    8. if the above command gives waiting for device then you have a driver problem , to fix that issue i had to install oneplusPC drivers https://oneplususbdrivers.com/
    9. also you would have to disable driver signature enforcement steps https://www.howtogeek.com/167723/ho...8.1-so-that-you-can-install-unsigned-drivers/
    10. once that is done , you will be unlocking bootloader with the command " fastboot flashing unlock "
    11. the phone would ask you to unlock and using volume keys to select and power to accept
    12. once phone is unlocked, it will wipe everything and load up the phone as brand new color OS , if you like finish the setup and once again enable dev options , usb debugging ( phone might as for allowing usb debugging later ,please accept )
    13. now just like before enable bootloader through powershell in the adb folder
    14. now once that is done ,extract the OP10 pro rom and copy the payload.bin somewhere
    15. now open fastboot enhance and make sure the phone is detected
    16. there will be a button that will enable phone to go into fastboot from bootloader in the app
    17. once that button is pressed you phone should go into fastboot mode with few options like wipe ,restrart and power off
    18. no need to press anything on the phone , just click on flash payload.bin in the fastboot enhance app
    19. it might give you a warning to delete .cow files in the temporary partitions, in that case click on the partition tab and scroll through the file names and identify the files ending in .cow and delete them one by one and after that click flash payload.bin once again .browse and select the payload.bin that you had extracted previously and its done ,
    20. wait for the loading bar to finish and your phone will start loading the oneplus icon and once all install is done should come up as a usuall setup phone
    21. enjoy . hope the explanation makes sense
    22. later for googlepay to work just open powershell in the adb folder and identify device and lock bootloader by using command "fastboot flashing lock "
    23. also re-enable driver signature enforcement on PC so that your online games using anti cheat works or you won't be able to play those games again . using
    24. 1 Open an elevated command prompt.

      2 Copy and paste the command you want to use below into the elevated command prompt, and press Enter. (see screenshots below)

      (enable driver signature enforcement - DEFAULT)
      bcdedit /set nointegritychecks off
    6
    I didn't anything. I'm scared because have a lot parts and I'm really don't know what I need to do. Have a some commands that I have never seen that before.

    I also have the Chinese Version NE2210 and flashed it with the EU ROM, follow these steps

    1 - Download and install the Oneplus drivers OnePlus 10 Pro Drivers
    2 - Download and install Minimal ADB and Fastboot Minimal ADB and Fastboot
    3 - Enable the Developer option, USB Debugging, and OEM Unlock
    4 - Allow USB Debugging, Tick the box "Always allow from this computer" if you do not see this message then disconnect and reconnect USB cable

    Screenshot_20160419-094818.png


    5 - Open Minimal ADB and Fastboot and run the command - adb devices
    If you see a device then the phone is connected, if not then repeat step 4.

    6 - Once the phone is connected, run the command - adb reboot bootloader
    The phone will load into bootloader -
    Type in - fastboot devices - To Verify the connection. The phone should be in this state

    741943-d52135065ebe580798108763a36b9437.jpg


    7 - Now you need to unlock the bootloader, type in - fastboot flashing unlock

    confirm-unlock-bootloader-oneplus-10-pro.jpg


    Use the volume button to highlight and use the power button to select the UNLOCK THE BOOTLOADER option.
    8 - Once the bootloader is unlocked, repeat step 6

    9 - Download and open Fastboot Enhanced, select Reboot to Bootloader option
    ss1.png


    10 - Once in the bootloader, select the Flash Payload.bin and select the payload file from the ROM that you downloaded.

    If you get this error message, then select no and delete the cow file from the partition
    virtual-ab-temporary-partitions-exists-Install-Indian-ROM-on-Chinese-OnePlus-10-Pro.png


    Filter by cow and delete all the files ending with cow

    delete-cow-partitions-Install-Indian-ROM-on-Chinese-OnePlus-10-Pro.png


    Once you have deleted the cow files, flash the payload again. This will take around 10-15 minutes.

    After the flashing is completed click on Reboot to System, The phone will boot into OxygenOS.

    I followed these 2 tutorials:

    Written Tutorial - Skip steps 5,6 and 7

    YouTube Tutorial
    3
    ✧ Oxygen OS 12.1 A11 IND full OTA.zip

    • Link 1 : Here
    • Link 2 : Here

    ✧ Oxygen OS 12.1 A11 EU full OTA.zip
    • Link 1 : Here
    • Link 2 : Here

    ◆ Instructions :
    • Unlock bootloader : fastboot flashing unlock
    • Flash payload.bin via fastbootD Here

    ✧ Color OS 12.1 A.15 full OTA : Here
    3
    i can confim locking the bootloader after install , everything even googlepay works
    2
    Anyone successfully flash a 12g/512g model?
    me, flash follow the step and reboot without any issued so far