[OneUI 3.0 Beta] (EXYNOS) Galaxy S10/+/e Beta Thread, Update.zip files
- Thread starter AhmedMomen
- Start date
Hello! If I'm not wrong G977B (S10 5G) got Android 11 stable update a few days back, so I think G977N will be receiving soon. Wait for a couple of days.
And the error might be because of the wrong file, I'm not sure, but many other S10 users had errors with the installation of Beta 2 before. So go through this thread to find out what they did.
Did anyone managed to capture the OTA update from ZTLJ to ETLJ for G975F (S10+) and is willing to share it?
Or it's not even available yet?
Thank you.
Or it's not even available yet?
Thank you.
Last edited:
I use Frija which is successor to SamFirm. Can you not just flash ETLJ over ZTLJ or is it a different update?
D
Deleted member 8730448
Guest
From what I seen in these 2 weeks of use, I can say with enough certainty that ETLJ update is still a bit laggy.
You can see it with more attention during animation transitions.
Is not a very pronounced problem, but there is. I will see what will happens with February update.
You can see it with more attention during animation transitions.
Is not a very pronounced problem, but there is. I will see what will happens with February update.
Agree, I have exactly the same experience. SM-G975F
Android 11 Message Bubbles are just too laggy for me, the autocorrection when using bubbles is hidden behind the keyboard. Battery is dropping rapidly, and cellular connection is pretty much compromised compared to Android 11.
But overall, there is a smoothness behind the UI. If these little bugs could be fixed...
But overall, there is a smoothness behind the UI. If these little bugs could be fixed...
Also, when a message in opened directly in an app, and not but the bubbles, the conversation notifications remain in the notification bar, and are pretty much, not easy to get rid of...
Is the same bootloader(9). You can go back to Android 10.
For me, the great issue is with the Camera. As someone mentioned, a slight movement will blur the image. S10 (G973F) Animations seems good, battery a slight drop than A10. Let's wait for the next update, I hope it will fix these all issues.
I did notice that the phone is less responsive on Android 11. It seems to kill apps way quicker than ever before. Pretty much every time I open an app it will load as if if closed. IE, when re-opening a browser all tabs will load their respective pages instead of the pages still being open. The same goes for other apps. This greatly impacts responsiveness as all apps need to load before they can be used. I have a feeling this also impacts battery life.
Curious to hear your experiences on this.
Curious to hear your experiences on this.
D
Deleted member 8730448
Guest
S20 received a new CUA3 update, with new changelist version (in practice the number that makes it clear if the services or system apps have been updated respect the previous public version).
At this point I think will be the same also with S10 (also because beta program for s10 series is still in progress in a certain sense).
Similar threads
- Locked
Top Liked Posts
-
There are no posts matching your filters.
-
51
(EXYNOS ONLY) Samsung Galaxy S10 series OneUI 3.0 Android 11 Beta Thread.
Samsung has started the Android 11 Beta program for the Galaxy S10 series
This thread will be for sharing tips and help and update.zip/.bin files (when available) for the upcoming OneUI 3.0 Android 11 Beta for the Galaxy S10 series (Exynos/International/Unlocked) version.
Eligible models
-Galaxy S10e (SM-G970F)
-Galaxy S10 (SM-G973F)
-Galaxy S10+ (SM-G975F)
ADB-method:
1. Download SDK platform tools from here https://developer.android.com/studio/releases/platform-tools
2. Extract them on your desktop.
3. Inside the extracted folder put the update.zip
4. Inside this folder, holding left shift, right click the mouse and select "open command prompt here". The command prompt will open.
5. Shutdown the phone.
6. Holding power+bixby+volume up buttons, enter into recovery mode.
7. Select "update via ADB". (you scroll down using the volume buttons and select using the power button).
8. Connect the phone to the PC using original samsung USB cable.
9. In the command prompt run the following command:
./adb devices
10. Wait to see that the daemon has started and that your device is found.
11. If you device is found, run the following command:
./adb sideload update.zip
SD-card method:
1. Download the bin file and rename it to update.zip (by going to file options in win10 you can select to view the file extensions. This makes the renaming process much easier and safer, and avoids renaming the file to update.zip.zip)
2. Copy it to the root directory of your SDcard.
3. Shut down your phone.
4. Hold simultaneously Power+bixby+volume up buttons to get into stock recovery.
5. Using your volume keys navigate to "update via SdCard" and press power button to select it.
6. Again using volume keys navigate to the file "update.zip" and press power button to select it.
7. Update will start. Leave it till it completes. It will take some time.
8. Phone will reboot by itself and load android.
The update process will start. You will see a percentage counting. First it will verify, then patch etc. Do not move the cable, disconnect the phone or power off the PC.
Once the process is completed (it takes some time) the phone will boot itself, update the apps and log into your home screen.
This will not trip knox if done by the methods above
Don't install a beta unless you are fully aware what you are going into.
Don't install the beta if you want your phone to be stable, IT'S a BETA.
Please don't keep asking over and over again about the update.zip files, If it's available then it will be present in the latest posts or in this thread. If not then no one has pulled it yet.
It's recommended to make a backup of your data before updating to the Android 11 Beta.
-Update.zip FOTA links:
S10e (SM-G970F):
Beta 1 DTJA -> ZTKF
Direct Link to Beta 2 from Android 10 (DTL1):
Beta 2 DTL1 -> ZTL8
S10 (SM-G973F):
Beta 1 DTJA -> ZTKF
Beta 2 ZTKF -> ZTL8
Direct link to Beta 2 from Android 10 (DTL1):
Beta 2 DTL1 -> ZTL8
S10+ (SM-G975F):
Beta 1 DTJA -> ZTKF
Beta 2 ZTKF -> ZTL8
Beta 3 ZTL8 -> ZTLJ
OneUI 3.1 EUA4 -> FUBD thanks to @AndrzejDwo
S10 5G (SM-G977N):
Beta 1 DTJ8 -> ZTKF
Beta 2 ZTKF -> ZTL8
-Update.zip Gdrive Links:
In case links above are not working for you.
S10e (SM-G970F):
Beta 1 (DTJA -> ZTKF)
GDrive Link
S10 (SM-G973F):
Beta 1 (DTJA -> ZTKF)
GDrive Link
S10+ (SM-G975F):
Beta 1 (DTJA -> ZTKF)
GDrive Link
As of Beta 1, when you try to update to Beta 2 with SD Card method, adb will not recognize the SD Card for some reason, you will need to use the ADB method in order to flash Beta 2.
Rename the .bin file to update.zip in order to be able to flash it from recovery.
A common mistake done by some people is that they see the file name update while its a WinRAR.zip file already, then they add another .zip making the name of the file update.zip.zip which will not be flashed successfully, Make sure you do it right.
Important Notes:
1. You cannot go into recovery using the old method in this beta, However, there are two work arounds
Method 1:
1. Connect your phone to your PC (Make sure USB debugging is on).
2. Using ADB, enter the command ./adb reboot recovery
3. Wait a little and you should be in recovery mode.
Method 2:
1. Power off your device
2. Connect your device to a PC or use the AKG earphones.
3. Hold down Volume up + Bixby + Power buttons and keep pressing them until you enter recovery mode.
2. GPay Does not work in the Beta, And will continue not to work until the stable version gets released.
Updating to the beta is AT YOUR RISK, No one is responsible if anything goes wrong.
You will not receive OTAs again UNTIL you are on a firmware that gets released for your CSC, thats most likely not happening before the BETA is over.
Small note:
My S10+ device isn't from a country that has a beta program, so i will not be able to pull the update.zip file unfortunately, But i will try my BEST to keep the thread updated with the latest beta update.zip file (If/when someone pulls it)
How to capture the update.zip file to share with other people:
1. Download HTTP canary app from playstore
2. Open HTTP Canary app
3. Start the update by pressing "download" and don't pause it
4. Go back to canary app and start it and it will grab the link for you
This thread was heavily inspired by @henklbr's great efforts in the last beta threads for different samsung devices, Also thanks to him for letting me copy little parts from his threads.1615Some of you guys are behaving like kids with no real world experience or knowledge of how software development, or indeed IT projects, work. If you think the Samsung devs are so incompetent maybe you should prove it by developing the software for them and releasing it before they do.
IRL Samsung has deployed a BETA testing program in multiple regions of the world in different languages on multiple devices with multiple SOC & region specific software customisation. They are getting the feedback relating to issues from those enrolled in the program and then working to fix those issues. Keep in mind that those enrolled in the program are a minute subset of the Samsung user base and so far they have a relatively stable BETA with some issues that have been identified which they need to fix, test internally & then decide if they can move the software from the BETA testing phase to stable or release the update as a stable build. They may actually be in the phase of internal testing where they are ensuring that everything is working well and submitting the update for Google Certification before deployment. This is a critical phase because if you release the software to the general public and there is a critical flaw, you're looking at millions of devices being affected and potentially billions in reputation damage.
You can keep shouting & having a tantrum on the internet if you want but all it shows is your lack of thought & knowledge. Grow up.12BETA 2 update for SM-G973F (S10) BTU ZTKF --> ZTL8
Update information
AP: G973FXXU9ZTL8
CSC: G973FOXM9ZTL8
Modem: G973FXXU9ZTL7
build_date= Thu Dec 10 22:23:25 KST 2020
security_patch_version= 2020-12-01
csc_information= OXM(ACR AFG AFR ATO AUT BGL BNG BRI BTC BTU CAC CAM CAU CHO COO CPW DBT DKR DOO ECT EGY EMP EON EUR GLB GTO ILO ILP INS ITV KSA LAO LUX LYS MAT MID MM1 MWD MXO MYM NEE NPL ORX PAK PEO PHE PHN ROM SEB SEE SEK SER SIO SIN SKZ SLK SMA SMP STH THL THR TKD TPA TPH TTT TUN TUR XEF XEH XEO XEU XFA XFE XFV XME XSG XSP XTC XXV TEL VAU OPS NZC TNZ VNZ XSA XNZ XEZ)
12
