[OneUI 3.0 Beta] (EXYNOS) Galaxy S10/+/e Beta Thread, Update.zip files
- Thread starter AhmedMomen
- Start date
Sorry to say this, S10+ was the first to get OneUI 3.1 in S10 series line up. And it's been more than 4 days, I guess.
NickosD
Senior Member
- Feb 1, 2013
- 3,750
- 1,166
- 28
Misterjunky
Senior Member
Yes, that's me....
I am on the January 1st. security patch and my S10+ G975F firmware is AUT CSC EUA4. (from Switzerland)
So I am waiting for the official Samsung multi file odin flash firmware.
If anyone has a download link please let everyone know and share it.
Sammobile, Samfirm and Frija do not have the new FUBD One UI 3.1 firmware yet.
Last edited:
Update.zip link is available in post #1 if you need that.
s10 + EUA4 update installed. The given UI 3.1 for S10e and S10 why S10 + is not provided! There is no download link. I didn't want to deal with someone else's OTA file from here. I also noticed today, Dolby Atmos not working with A11! I turn it on and off, but there is no change in the sound. Samsun did a terrible job as always. the end is close to being like Nokia.
I'm using G973F with one ui 3.1 (FUBD) installed, ITV as CSC. Previously I was on 3.0 (EUA4). All I did is download the firmware from Frija, selecting AUT (switzerland) as CSC and G973F as device. Then I used odin and download mode to install the firmware and using HOME_CSC to not wipe the rom and keep ITV (Italy) CSC. It works great right know.
Hope it helps
Hope it helps
That's what I did, upgraded to FUBD and used HOME_CSC from ROM EUA4 (ZTO - Brazil) Everything working perfectly, also Samsung Pay!
Last edited:
As far as I know the update link you are referring to is only for S10+ on January security patch ---> updating to March security patch. I'm on Februari patch and I get the same error.
You should downgrade to January patch or wait for firmware to arrive on Frija / Samfirm etc / wait for the OTA to arrive on your phone
I guess that's it then. Thanks for letting me know. The only way to downgrade is via Odin? I'm on a mac so I'm afraid my only way is to wait for a patch for the February firmware.
Yes, I'm in the same boat and decided to wait. It won't harm to wait a bit for a easy OTA upgrade
G975FXXU9FUBD (AUT) for S10+ is now available for download from Frija and SamFirm. And also appeared on the site:
samfrew.com
SM-G975F | Samsung Galaxy S10+ | Firmware Download for Switzerland | PDA/MODEM: G975FXXU9FUBD | CSC: G975FOXM9FUBD — Samfrew.com
Samsung Firmware Download, Model: SM-G975F, PDA/AP Version: G975FXXU9FUBD, CSC Version: G975FOXM9FUBD, Region: AUT
Firmware Download:
G975FXXU9FUBD_G975FOXM9FUBD_G975FXXU9FUBD_BTU.zip | for Galaxy S10+ (androidfilehost)
One UI 3.1 for G975F
G975FXXU9FUBD_G975FOXM9FUBD_G975FXXU9FUBD_BTU.zip | for Galaxy S10+ (androidfilehost)
One UI 3.1 for G975F
Misterjunky
Senior Member
I am anxiously waiting for someone to post that they had complete success odin flashing the new FUBD multi-file firmware for the S10+ G975F phone.G975FXXU9FUBD (AUT) for S10+ is now available for download from Frija and SamFirm. And also appeared on the site:
View attachment 5237247SM-G975F | Samsung Galaxy S10+ | Firmware Download for Switzerland | PDA/MODEM: G975FXXU9FUBD | CSC: G975FOXM9FUBD — Samfrew.com
Samsung Firmware Download, Model: SM-G975F, PDA/AP Version: G975FXXU9FUBD, CSC Version: G975FOXM9FUBD, Region: AUT
Thanks!
Can anyone upload the One Ui 3.1 Update from EUB1 To FUBD for S10+ from BTU are update zip for ADB
Yes, same update available for my SM-G975F
All The have S10+ DBT
Install Smart Switch on PC Update it AMD Install the update For One Ui 3.1 its 5GB its not OTA its Full firmware 5GB
Install Smart Switch on PC Update it AMD Install the update For One Ui 3.1 its 5GB its not OTA its Full firmware 5GB
Misterjunky
Senior Member
Have you checked DOLBY audio on this FUBD update yet?
How would you describe the volume with and without dolby?
Is it a big noticeable difference in volume between enabling & disabling dolby?
Similar threads
- Locked
Top Liked Posts
-
There are no posts matching your filters.
-
51
(EXYNOS ONLY) Samsung Galaxy S10 series OneUI 3.0 Android 11 Beta Thread.
Samsung has started the Android 11 Beta program for the Galaxy S10 series
This thread will be for sharing tips and help and update.zip/.bin files (when available) for the upcoming OneUI 3.0 Android 11 Beta for the Galaxy S10 series (Exynos/International/Unlocked) version.
Eligible models
-Galaxy S10e (SM-G970F)
-Galaxy S10 (SM-G973F)
-Galaxy S10+ (SM-G975F)
ADB-method:
1. Download SDK platform tools from here https://developer.android.com/studio/releases/platform-tools
2. Extract them on your desktop.
3. Inside the extracted folder put the update.zip
4. Inside this folder, holding left shift, right click the mouse and select "open command prompt here". The command prompt will open.
5. Shutdown the phone.
6. Holding power+bixby+volume up buttons, enter into recovery mode.
7. Select "update via ADB". (you scroll down using the volume buttons and select using the power button).
8. Connect the phone to the PC using original samsung USB cable.
9. In the command prompt run the following command:
./adb devices
10. Wait to see that the daemon has started and that your device is found.
11. If you device is found, run the following command:
./adb sideload update.zip
SD-card method:
1. Download the bin file and rename it to update.zip (by going to file options in win10 you can select to view the file extensions. This makes the renaming process much easier and safer, and avoids renaming the file to update.zip.zip)
2. Copy it to the root directory of your SDcard.
3. Shut down your phone.
4. Hold simultaneously Power+bixby+volume up buttons to get into stock recovery.
5. Using your volume keys navigate to "update via SdCard" and press power button to select it.
6. Again using volume keys navigate to the file "update.zip" and press power button to select it.
7. Update will start. Leave it till it completes. It will take some time.
8. Phone will reboot by itself and load android.
The update process will start. You will see a percentage counting. First it will verify, then patch etc. Do not move the cable, disconnect the phone or power off the PC.
Once the process is completed (it takes some time) the phone will boot itself, update the apps and log into your home screen.
This will not trip knox if done by the methods above
Don't install a beta unless you are fully aware what you are going into.
Don't install the beta if you want your phone to be stable, IT'S a BETA.
Please don't keep asking over and over again about the update.zip files, If it's available then it will be present in the latest posts or in this thread. If not then no one has pulled it yet.
It's recommended to make a backup of your data before updating to the Android 11 Beta.
-Update.zip FOTA links:
S10e (SM-G970F):
Beta 1 DTJA -> ZTKF
Direct Link to Beta 2 from Android 10 (DTL1):
Beta 2 DTL1 -> ZTL8
S10 (SM-G973F):
Beta 1 DTJA -> ZTKF
Beta 2 ZTKF -> ZTL8
Direct link to Beta 2 from Android 10 (DTL1):
Beta 2 DTL1 -> ZTL8
S10+ (SM-G975F):
Beta 1 DTJA -> ZTKF
Beta 2 ZTKF -> ZTL8
Beta 3 ZTL8 -> ZTLJ
OneUI 3.1 EUA4 -> FUBD thanks to @AndrzejDwo
S10 5G (SM-G977N):
Beta 1 DTJ8 -> ZTKF
Beta 2 ZTKF -> ZTL8
-Update.zip Gdrive Links:
In case links above are not working for you.
S10e (SM-G970F):
Beta 1 (DTJA -> ZTKF)
GDrive Link
S10 (SM-G973F):
Beta 1 (DTJA -> ZTKF)
GDrive Link
S10+ (SM-G975F):
Beta 1 (DTJA -> ZTKF)
GDrive Link
As of Beta 1, when you try to update to Beta 2 with SD Card method, adb will not recognize the SD Card for some reason, you will need to use the ADB method in order to flash Beta 2.
Rename the .bin file to update.zip in order to be able to flash it from recovery.
A common mistake done by some people is that they see the file name update while its a WinRAR.zip file already, then they add another .zip making the name of the file update.zip.zip which will not be flashed successfully, Make sure you do it right.
Important Notes:
1. You cannot go into recovery using the old method in this beta, However, there are two work arounds
Method 1:
1. Connect your phone to your PC (Make sure USB debugging is on).
2. Using ADB, enter the command ./adb reboot recovery
3. Wait a little and you should be in recovery mode.
Method 2:
1. Power off your device
2. Connect your device to a PC or use the AKG earphones.
3. Hold down Volume up + Bixby + Power buttons and keep pressing them until you enter recovery mode.
2. GPay Does not work in the Beta, And will continue not to work until the stable version gets released.
Updating to the beta is AT YOUR RISK, No one is responsible if anything goes wrong.
You will not receive OTAs again UNTIL you are on a firmware that gets released for your CSC, thats most likely not happening before the BETA is over.
Small note:
My S10+ device isn't from a country that has a beta program, so i will not be able to pull the update.zip file unfortunately, But i will try my BEST to keep the thread updated with the latest beta update.zip file (If/when someone pulls it)
How to capture the update.zip file to share with other people:
1. Download HTTP canary app from playstore
2. Open HTTP Canary app
3. Start the update by pressing "download" and don't pause it
4. Go back to canary app and start it and it will grab the link for you
This thread was heavily inspired by @henklbr's great efforts in the last beta threads for different samsung devices, Also thanks to him for letting me copy little parts from his threads.1615Some of you guys are behaving like kids with no real world experience or knowledge of how software development, or indeed IT projects, work. If you think the Samsung devs are so incompetent maybe you should prove it by developing the software for them and releasing it before they do.
IRL Samsung has deployed a BETA testing program in multiple regions of the world in different languages on multiple devices with multiple SOC & region specific software customisation. They are getting the feedback relating to issues from those enrolled in the program and then working to fix those issues. Keep in mind that those enrolled in the program are a minute subset of the Samsung user base and so far they have a relatively stable BETA with some issues that have been identified which they need to fix, test internally & then decide if they can move the software from the BETA testing phase to stable or release the update as a stable build. They may actually be in the phase of internal testing where they are ensuring that everything is working well and submitting the update for Google Certification before deployment. This is a critical phase because if you release the software to the general public and there is a critical flaw, you're looking at millions of devices being affected and potentially billions in reputation damage.
You can keep shouting & having a tantrum on the internet if you want but all it shows is your lack of thought & knowledge. Grow up.12BETA 2 update for SM-G973F (S10) BTU ZTKF --> ZTL8
Update information
AP: G973FXXU9ZTL8
CSC: G973FOXM9ZTL8
Modem: G973FXXU9ZTL7
build_date= Thu Dec 10 22:23:25 KST 2020
security_patch_version= 2020-12-01
csc_information= OXM(ACR AFG AFR ATO AUT BGL BNG BRI BTC BTU CAC CAM CAU CHO COO CPW DBT DKR DOO ECT EGY EMP EON EUR GLB GTO ILO ILP INS ITV KSA LAO LUX LYS MAT MID MM1 MWD MXO MYM NEE NPL ORX PAK PEO PHE PHN ROM SEB SEE SEK SER SIO SIN SKZ SLK SMA SMP STH THL THR TKD TPA TPH TTT TUN TUR XEF XEH XEO XEU XFA XFE XFV XME XSG XSP XTC XXV TEL VAU OPS NZC TNZ VNZ XSA XNZ XEZ)
12
