• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!
  • Fill out your device list and let everyone know which phones you have!    Edit Your Device Inventory

OREO ON P10 LITE (WAS-LX1A/L01A/L21A/L01C/L21C) C432log

Search This thread
Code:
#include <stdio.h>

int main() {
printf("I Do not Become Responsible For The Bad Installation\nNow Your Warranty Is Mine, Before Flashing Investigate\n");
printf("You Decide to Make All These Modifications to Your Device\nUnder Your Own Risk, If You Spoil Your Device, I Will Laugh At You");
return 0;
}
Download the 7z file you will find anything for flashing oreo (update/2/3.zip, nocheck recovery (nougat & oreo), TWRP Recovery (nougat)
DOWNLOAD 7z
TWRP OREO

Enable ADB Bridge and unlock bootloader (tnx huawei for the deleted website)
Go to fastboot mode (power and volume -)
Open cmd and flash nougat TWRP "fastboot flash twrp-3.1.1-2-v2.5-prague.img"
Reboot to recovery (power and volume + plus volume -)
Go to install>Flash image>Go sto sdcard and select "Recovery No_check Nougat_hi6250" (flash to recovery partition)
DON'T REBOOT
Go back to initial page>advanced>terminal and write this:
  • echo —update_package=/sdcard/update.zip > /cache/recovery/command
  • reboot recovery
Wait for update to install
Now don't wait for reboot, go directly in fastboot mode (power and volume -))
On cmd write " Fastboot flash recovery_ramdisk "TWRP OREO hi6250"
Reboot to recovery (power plus volume + and volume -)
Go to install>Flash image>Go sto sdcard and select "Recovery No_checkOreo_hi6250" (flash to recovery ramdisk partition)
DON'T REBOOT
Go back to initial page>advanced>terminal and write this:
  • echo —update_package=/sdcard/update2.zip > /cache/recovery/command
  • reboot recovery
Wait for update to install
Now don't wait for reboot, go directly in fastboot mode (power and volume -)
On cmd write " Fastboot flash recovery_ramdisk "TWRP OREO hi6250"
Reboot to recovery (power plus volume + and volume -)
Go to install>Flash image>Go sto sdcard and select "Recovery No_checkOreo_hi6250" (flash to recovery ramdisk partition)
DON'T REBOOT
Go back to initial page>advanced>terminal and write this:
  • echo —update_package=/sdcard/update3.zip > /cache/recovery/command
  • reboot recovery
Now wait for reboot, don't have to go on recovery or anything else
Now you are in oreo c:

Images:
yAfCvwI.jpg

qQCS3DR.jpg


Credits:
MTteam for the firmware
@haky 86 for the TWRP Nougat recovery
@Askuccio_DROID for the RecoveryNoCheckOreo
 
Last edited:

vovan1982

Senior Member
Jul 18, 2017
69
92
Rostov-on-Don
Code:
/*
 * I Do not Become Responsible For The Bad Installation
 * Now Your Warranty Is Mine, Before Flashing Investigate
 * You Decide to Make All These Modifications to Your Device
 * Under Your Own Risk, If You Spoil Your Device, I Will Laugh At You
 */
Download the 7z file you will find anything for flashing oreo (update/2/3.zip, nocheck recovery (nougat & oreo), TWRP Recovery (nougat)
DOWNLOAD 7z
TWRP OREO

Enable ADB Bridge and unlock bootloader (tnx huawei for the deleted website)
Go to fastboot mode (power and volume -)
Open cmd and flash nougat TWRP "fastboot flash twrp-3.1.1-2-v2.5-prague.img"
Reboot to recovery (power and volume + plus volume -)
Go to install>Flash image>Go sto sdcard and select "Recovery No_check Nougat_hi6250" (flash to recovery partition)
DON'T REBOOT
Go back to initial page>advanced>terminal and write this:
  • echo —update_package=/sdcard/update.zip > /cache/recovery/command
  • reboot recovery
Wait for update to install
Now don't wait for reboot, go directly in fastboot mode (power and volume -))
On cmd write " Fastboot flash recovery_ramdisk "TWRP OREO hi6250"
Reboot to recovery (power plus volume + and volume -)
Go to install>Flash image>Go sto sdcard and select "Recovery No_checkOreo_hi6250" (flash to recovery ramdisk partition)
DON'T REBOOT
Go back to initial page>advanced>terminal and write this:
  • echo —update_package=/sdcard/update2.zip > /cache/recovery/command
  • reboot recovery
Wait for update to install
Now don't wait for reboot, go directly in fastboot mode (power and volume -)
On cmd write " Fastboot flash recovery_ramdisk "TWRP OREO hi6250"
Reboot to recovery (power plus volume + and volume -)
Go to install>Flash image>Go sto sdcard and select "Recovery No_checkOreo_hi6250" (flash to recovery ramdisk partition)
DON'T REBOOT
Go back to initial page>advanced>terminal and write this:
  • echo —update_package=/sdcard/update3.zip > /cache/recovery/command
  • reboot recovery
Now wait for reboot, don't have to go on recovery or anything else
Now you are in oreo c:

Images:
yAfCvwI.jpg

qQCS3DR.jpg


Credits:
MTteam for the firmware
Haky86 for the recovery

Why this instruction? You repeat the same thing. There is HwOTA. It has an update from SD Also there is HwOTA 8 for rollback. The instruction does not make sense. You reinvent the wheel again.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 5
    Code:
    #include <stdio.h>
    
    int main() {
    printf("I Do not Become Responsible For The Bad Installation\nNow Your Warranty Is Mine, Before Flashing Investigate\n");
    printf("You Decide to Make All These Modifications to Your Device\nUnder Your Own Risk, If You Spoil Your Device, I Will Laugh At You");
    return 0;
    }
    Download the 7z file you will find anything for flashing oreo (update/2/3.zip, nocheck recovery (nougat & oreo), TWRP Recovery (nougat)
    DOWNLOAD 7z
    TWRP OREO

    Enable ADB Bridge and unlock bootloader (tnx huawei for the deleted website)
    Go to fastboot mode (power and volume -)
    Open cmd and flash nougat TWRP "fastboot flash twrp-3.1.1-2-v2.5-prague.img"
    Reboot to recovery (power and volume + plus volume -)
    Go to install>Flash image>Go sto sdcard and select "Recovery No_check Nougat_hi6250" (flash to recovery partition)
    DON'T REBOOT
    Go back to initial page>advanced>terminal and write this:
    • echo —update_package=/sdcard/update.zip > /cache/recovery/command
    • reboot recovery
    Wait for update to install
    Now don't wait for reboot, go directly in fastboot mode (power and volume -))
    On cmd write " Fastboot flash recovery_ramdisk "TWRP OREO hi6250"
    Reboot to recovery (power plus volume + and volume -)
    Go to install>Flash image>Go sto sdcard and select "Recovery No_checkOreo_hi6250" (flash to recovery ramdisk partition)
    DON'T REBOOT
    Go back to initial page>advanced>terminal and write this:
    • echo —update_package=/sdcard/update2.zip > /cache/recovery/command
    • reboot recovery
    Wait for update to install
    Now don't wait for reboot, go directly in fastboot mode (power and volume -)
    On cmd write " Fastboot flash recovery_ramdisk "TWRP OREO hi6250"
    Reboot to recovery (power plus volume + and volume -)
    Go to install>Flash image>Go sto sdcard and select "Recovery No_checkOreo_hi6250" (flash to recovery ramdisk partition)
    DON'T REBOOT
    Go back to initial page>advanced>terminal and write this:
    • echo —update_package=/sdcard/update3.zip > /cache/recovery/command
    • reboot recovery
    Now wait for reboot, don't have to go on recovery or anything else
    Now you are in oreo c:

    Images:
    yAfCvwI.jpg

    qQCS3DR.jpg


    Credits:
    MTteam for the firmware
    @haky 86 for the TWRP Nougat recovery
    @Askuccio_DROID for the RecoveryNoCheckOreo