Orzly Tempered Glass Screen Protector for OnePlus 6

[sn0warmy]

It took 3 or 4 days for the upper right bubble to completely disappear for me.

Sounds good. I'll give it until Saturday. If it doesn't go away, I'll start from scratch.

 

[dwang]

Sounds good. I'll give it until Saturday. If it doesn't go away, I'll start from scratch.

orzly customer service is pretty good. If you send them a picture, they will send you another pack for free..

Can you post a picture of where the bubble is?

My original install had a large dust particle where the bubble was and that wouldn't go away. I had to lift the tgsp and remove the dust particle first.

 

[sn0warmy]

After no change in the bubble on try #1, I decided to go round 2 with my second Orzly protector this morning. Initial install was perfect positioning on the first try but I still had a bubble in each of the 4 corners. It took some SERIOUS massaging for around 20 straight minutes to get them all but I'm finally left with a perfect install. I'm happy with the results but I must say that this TGSP install is one of the more intensive ones I've ever experienced.

orzly customer service is pretty good. If you send them a picture, they will send you another pack for free..

Can you post a picture of where the bubble is?

My original install had a large dust particle where the bubble was and that wouldn't go away. I had to lift the tgsp and remove the dust particle first.

I think my issue with the bubble not going away was dust, as well. Here's a picture I snapped of the bubble.

---------- Post added at 10:30 AM ---------- Previous post was at 10:16 AM ----------

And here is a picture of the Orzly protector installed with the OnePlus Nylon TPU case. I purposely positioned the Orzly protector slightly lower on the screen so that my finger wouldn't catch the bottom of edge of the protector during gesture navigation actions.

 

[cmart4]

After no change in the bubble on try #1, I decided to go round 2 with my second Orzly protector this morning. Initial install was perfect positioning on the first try but I still had a bubble in each of the 4 corners. It took some SERIOUS massaging for around 20 straight minutes to get them all but I'm finally left with a perfect install. I'm happy with the results but I must say that this TGSP install is one of the more intensive ones I've ever experienced.


Install looks great! I've got a few Orzly backups in case my official TGSP gets cracked or whatnot.

 

[thetonyclifton]

After no change in the bubble on try #1, I decided to go round 2 with my second Orzly protector this morning. Initial install was perfect positioning on the first try but I still had a bubble in each of the 4 corners. It took some SERIOUS massaging for around 20 straight minutes to get them all but I'm finally left with a perfect install. I'm happy with the results but I must say that this TGSP install is one of the more intensive ones I've ever experienced.

I think my issue with the bubble not going away was dust, as well. Here's a picture I snapped of the bubble.

---------- Post added at 10:30 AM ---------- Previous post was at 10:16 AM ----------

And here is a picture of the Orzly protector installed with the OnePlus Nylon TPU case. I purposely positioned the Orzly protector slightly lower on the screen so that my finger wouldn't catch the bottom of edge of the protector during gesture navigation actions.

I applied mine quite a few times to reposition and to remove dust. I found the install very forgiving compared to the official TGSP. One of the reasons I moved mine was that I had it too low and it was annoying me because the black border made the notch too deep. I guess we are opposites of each other ?

 

[sn0warmy]

I applied mine quite a few times to reposition and to remove dust. I found the install very forgiving compared to the official TGSP. One of the reasons I moved mine was that I had it too low and it was annoying me because the black border made the notch too deep. I guess we are opposites of each other

Yeah, the notch is definitely deeper now. But I'd prefer that over constantly snagging my index finger on the bottom lip of the protector during gesture swiping. The top of the protector is now just barely above the clock and the battery bar but it isn't cutting those off so I'm happy.

 

[B3501]

Incase anyone completely ruins their install, I managed to install mine quite a few times. Each time I rinsed the protector under water with some washing liquid and then it stuck again onto the screen after squeezing any excess water out. This is only if you completely mess things up though.

Sent from my ONEPLUS A6003 using Tapatalk

 

[Kareltje538]

I sure hope it will be a good protector...if I look at reviews...but now I know to wait a few days to watch if any bubbles disappear.

That said : supposedly I get them tomorrow...tracking at amazon says dispatched june 11th and arriving tomorrow. I get stuff from Ali quicker than that!!!

 

[Vodderz]

Received my protectors today. Installation was fairly easy, there was one bubble near the top which wasn't going away by "massaging" it, but applying constant pressure made it disappear after a minute or two. The black edge does take up a small amount of space on the screen but it's not substantial enough to affect my day to day use. Also, it isn't as much of a fingerprint magnet as the factory fitted plastic protector which is a bonus. I'm using the case that came with the Oneplus 6 (until the nylon case is back in stock) and the protector is perfectly sized, making it smoother to use the gesture navigation. It also feels really nice to use, miles better than the plastic protector. 10/10 would buy again.

 

[Gramzz]

Could you tell me what exactly consist quad pack tempered glass protector for OnePlus 6?

Of course there are 4 glasses but how many wipes and others accessories?

 

[bamfsig45]

I too got mine today. Installation was easy enough. I dont use gestures so I aligned mine higher so that it didn't make the notch bigger as some of you have said. I also noticed that the rounded screen corners on this TPG seemed to fit better, or not take away for the rounded corners on the screen. At least not in the way the Official one does. I had a few stubborn bubbles, but persistence with rubbing them, holding pressure on them and patience they all worked out. The hard plastic squeegee that came with the Official TPG is a great tool, hope you kept it if you had one. I find this has far less 3D effect than the official TPG and I dont notice it taking up much screen space due to that factor. Im guessing its a thinner piece of glass is why.

Great purchase and dont believe the reviews on amazon.

 

[B3501]

This is strange but the bubbles around the edge do actually dissappear. Mine took 4 days and now they're gone. Weird.

Sent from my ONEPLUS A6003 using Tapatalk

---------- Post added at 07:12 PM ---------- Previous post was at 07:00 PM ----------

Could you tell me what exactly consist quad pack tempered glass protector for OnePlus 6?

Of course there are 4 glasses but how many wipes and others accessories?

There are 2 glasses not 4.

Sent from my ONEPLUS A6003 using Tapatalk

 

[Gramzz]

---------- Post added at 07:12 PM ---------- Previous post was at 07:00 PM ----------

[/COLOR]There are 2 glasses not 4.

Sent from my ONEPLUS A6003 using Tapatalk[/QUOTE]
There are 4 glasses. So this is quad
https://orzly.com/collections/onepl...lass-screen-protector-for-oneplus-6-quad-pack

 

[B3501]

---------- Post added at 07:12 PM ---------- Previous post was at 07:00 PM ----------

[/COLOR]There are 2 glasses not 4.

Sent from my ONEPLUS A6003 using Tapatalk

There are 4 glasses. So this is quad
https://orzly.com/collections/onepl...lass-screen-protector-for-oneplus-6-quad-pack[/QUOTE]Ah OK, I got the 2 pack.

Sent from my ONEPLUS A6003 using Tapatalk

 

[Matrix_19]

I should receive mine in the next days,
can anyone share a photo of the glass on the phone ?

thanks

 

[Gramzz]

Could somebody explain me why price on orzly.com for OP6 Tempered Glass 2-pack is 15GBP+4,5GBP shipment=19,5GBP summary, but buying through ebay.com is 10GBP+1,95GBP=11,95GBP?
It's really strange for me. Do you see any disadvantage buing through ebay compare to orzly.com?

 

[thetonyclifton]

Could somebody explain me why price on orzly.com for OP6 Tempered Glass 2-pack is 15GBP+4,5GBP shipment=19,5GBP summary, but buying through ebay.com is 10GBP+1,95GBP=11,95GBP?
It's really strange for me. Do you see any disadvantage buing through ebay compare to orzly.com?

No its bizarre. I noticed the same and bought from ebay. I am guessing but I assume it is to do with the in house process and packaging they need to do if purchased direct whereas perhaps amazon cheapens that drastically and the savings are passed on. Either way it is a nonsense. If that is the case they should simply direct people to amazon for purchase.

 

[Gramzz]

Do you think that Orzly glass will be compatible with Otterbox case? Original TGSP glass is not compatible so i'm looking for good glass to this case. I bought Nillikin but this is piece of sh**t

 

[thetonyclifton]

Do you think that Orzly glass will be compatible with Otterbox case? Original TGSP glass is not compatible so i'm looking for good glass to this case. I bought Nillikin but this is piece of sh**t

Cant say for sure as I don't have that case but from watching video it seems the official tgsp is only just too small for that case. I have tried both the Orzly and the official screen and the Orzly is a little smaller top and bottom at least, so if it is a corner catching then the Orzly might just solve the problem.

 

[Bigs1985]

Got mine yesterday, had been using the official one since I got the phone but it was too thick. I have the nylon case and when using with the official protector there was no lip. The orzly one was easier to fit, is thinner and the case now has a lip! All good. Definitely would recommend over the official.

Sent from my OnePlus 6 using XDA Labs