[OS4.3] Wifi Fix | Root | DeKnox | Debloat | CSC features | Build prop

[Miqueas111]

Hi all, question, can I do this...?

1. Flash stock MK4 from Sammobile
2. Flash this zip, which is supposed to set free the bootloader from know.
3. Flash any ROM without issues (like OmniROM, CM or anyother 4.4 ROM)

Is this possible?

N7100

 

[PrimaryComplex]

No, if you flash or hit MK4 for any reason flashing anything else lower than MK4 will trip your warranty void flag and you can no longer flash anything older via odin

Sent from my GT-N7100 using xda app-developers app

 

[sLapshock]

But flashing philz recovery wont send me in recovery mode ? (typical knox behaviour)

Hi.

1.How do i know which bootloader i am on? I checked my ABOUT in settings and it written under my baseband 'N7100DDEMJ9', does that means that MJ5 BOOTLOADER provided is inferior?

2. Let make confirm this, to apply your wifi fix, i need to extract to your .md5 and then i load under which tab? im on odin3 and i only saw PIT BL AP CP and CSC.

 

[joaonds]

...

 

[Miqueas111]

Hi all, question, can I do this...?

1. Flash stock MK4 from Sammobile
2. Flash this zip, which is supposed to set free the bootloader from know.
3. Flash any ROM without issues (like OmniROM, CM or anyother 4.4 ROM)

Is this possible?

N7100

Sorry don't get it.
If I flash this ROM
http://forum.xda-developers.com/showthread.php?t=2533611
It's KNOX free and pre-rooted.

Then If I flash this zip, Am I gonna have the old bootloader? So I can install any other ROM, like Omni or CM (4.4)?
Thanks.

 

[cba165]

I am on stock MK4 ROM upgraded using Kies and now I get that KNOX warning and unable to root. I see from some comments that some people have managed to root and remove KNOX using CWM. Can someone provide step-wise instructions on how to do this? Thanks in advance.

Anand

I also flash stock rom and successfully root with cf auto root via pc odin.then I install rom manger and cwm recovry via rom manger.then I flash patched kernel and modem by zuluman because my phone was show emergncy calls only.now evrything working ok and my knox warranty void numbers is show 1.and my phone show a notification SE for android has disable.but evrything is ok and working.I dont know I can delte knox or not

---------- Post added at 09:17 PM ---------- Previous post was at 09:14 PM ----------

I am on stock MK4 ROM upgraded using Kies and now I get that KNOX warning and unable to root. I see from some comments that some people have managed to root and remove KNOX using CWM. Can someone provide step-wise instructions on how to do this? Thanks in advance.

Anand

I also flash stock rom and successfully root with cf auto root via pc odin.then I install rom manger and cwm recovry via rom manger.then I flash patched kernel and modem by zuluman because my phone was show emergncy calls only.now evrything working ok and my knox warranty void numbers is show 1.and my phone show a notification SE for android has disable.but evrything is ok and working.I dont know I can delete knox or not

 

[jitin02]

I also flash stock rom and successfully root with cf auto root via pc odin.then I install rom manger and cwm recovry via rom manger.then I flash patched kernel and modem by zuluman because my phone was show emergncy calls only.now evrything working ok and my knox warranty void numbers is show 1.and my phone show a notification SE for android has disable.but evrything is ok and working.I dont know I can delte knox or not

---------- Post added at 09:17 PM ---------- Previous post was at 09:14 PM ----------



I also flash stock rom and successfully root with cf auto root via pc odin.then I install rom manger and cwm recovry via rom manger.then I flash patched kernel and modem by zuluman because my phone was show emergncy calls only.now evrything working ok and my knox warranty void numbers is show 1.and my phone show a notification SE for android has disable.but evrything is ok and working.I dont know I can delete knox or not

You mean you flashed via Odin over mk4?

Sent from my GT-N7100 using Tapatalk

 

[MU24R]

Hi i have a question i have wififix installed but before that i was using ma1 módem now it says mj9 but the problem its that i tried to go back to 4.1.2 with my nandroid but i get generic imei can somebody help me

Enviado desde mi Galaxy Note II usando Tapatalk 2

 

[jamesjr1]

Would this be possible for GT-N7105?

Hi Dr Ketan,
Could you please see if it is possible to do the same for gt-n7105? here is the 4.1.2 bootloader - http://d-h.st/OSf
I flashed - N7105XXUEMK5 and all was working fine but now my wifi/bluetooth have stopped working. They used to do this occasionally but now they are permanently off. I am still under warranty. Any advice on reverting the 7105 back to 4.1.2 would be greatly appreciated.

 

[jeggen]

I'm unable to flash the fix either using PC ODIN3 v1.85 and ODIN 3 v1.7.

I fully wiped my device and install Syngergy ROM: http://forum.xda-developers.com/showthread.php?t=2090160

In ODIN Download mode it does have a 2 count for custom binary download and shows current binary and system status as custom if that makes a difference.

Using the flash files in the OP.

Now trying to install the fix vi ODIN and get this in my message log.

<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> patch.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> tz.img
<ID:0/006> NAND Write Start!! 
<ID:0/006> 
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

 

[stonedead]

Those of you who want to taste the 4.3 firmware, you guys don't need the bootloader. I use DN3 and Ihe newer MK3 stock firmware without any problem.
Here is the step to do:

1. Install Mobile Odin.

2. Flash 4.3 firmware with mobile odin, tick "wipe data and cache" also tick "wipe dalvik cache". Let it finish and reboot, you'll notice your wifi didn't work.

3. Using PC Odin, flash the wifi patch by dr ketan, reboot and your wifi is working now.

4. If you want root, flash custom recovery first with PC odin (I use TWRP).

5. Reboot to recovery, select install zip then choose multi tool advance v5 by dr ketan. Select root the device in multitool and you're good to go.

That's all. Thanks so much to dr ketan for his hardwork and endless contributions to the android community.
Btw...I found that MK3 Hongkong firmware is the most stable and smoother of all 4.3 firmwares.

 

[mnr336]

Not able to flash Wifi Patch using PC Odin-Result FAIL

Those of you who want to taste the 4.3 firmware, you guys don't need the bootloader. I use DN3 and Ihe newer MK3 stock firmware without any problem.
Here is the step to do:

1. Install Mobile Odin.

2. Flash 4.3 firmware with mobile odin, tick "wipe data and cache" also tick "wipe dalvik cache". Let it finish and reboot, you'll notice your wifi didn't work.

3. Using PC Odin, flash the wifi patch by dr ketan, reboot and your wifi is working now.

4. If you want root, flash custom recovery first with PC odin (I use TWRP).

5. Reboot to recovery, select install zip then choose multi tool advance v5 by dr ketan. Select root the device in multitool and you're good to go.

That's all. Thanks so much to dr ketan for his hardwork and endless contributions to the android community.
Btw...I found that MK3 Hongkong firmware is the most stable and smoother of all 4.3 firmwares.

Hi, I did the same procedure. But I couldn't flash @dr.ketan wifi patch via PC Odin. I get FAIL message.

 

[stonedead]

Hi, I did the same procedure. But I couldn't flash @dr.ketan wifi patch via PC Odin. I get FAIL message.

What version of pc odin you use? I'm still using v3.04..it never failed me.

 

[mnr336]

Not able to flash Wifi Patch using PC Odin-Result FAIL

I'm unable to flash the fix either using PC ODIN3 v1.85 and ODIN 3 v1.7.

I fully wiped my device and install Syngergy ROM: http://forum.xda-developers.com/showthread.php?t=2090160

In ODIN Download mode it does have a 2 count for custom binary download and shows current binary and system status as custom if that makes a difference.

Using the flash files in the OP.

Now trying to install the fix vi ODIN and get this in my message log.

<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> patch.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> tz.img
<ID:0/006> NAND Write Start!! 
<ID:0/006> 
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Hi, I also get struck up at the same level. I am not able to flash Wifi Patch via PC Odin. Back to old Stock ROM.Please share , if you get some other successful method to do it. Thanks

 

[stonedead]

Try it with this version of pc odin, put the wifi fix in pda tab..https://www.dropbox.com/s/rr3g42nhtyej7h3/Odin3_v3.04.zip

 

[jeggen]

Hi, I also get struck up at the same level. I am not able to flash Wifi Patch via PC Odin. Back to old Stock ROM.Please share , if you get some other successful method to do it. Thanks

Someone in the L900 thread posted to this thread for the wifi fix but I found another for the L900 I was able to get to work.

 

[dj-suicide]

hey guys can any one help please.
i just flash Dr.Ketan's Custom ROM V6 install when fine then when booted i had no wifi but had 3g so i flashed wifi patch
now i have wifi but no 3g,

thanks in advance

no matter fixed with factory reset lol.

 

[cbarth3]

No reports regarding flashable wifi patch?
Already 6 download

Sent from my SM-N900 using xda premium

I have the Tar file for the Sprint Note 2 and also your flashable zip. Can I just swap the files out and use that as a flashable zip for it?

Thanks

 

[dr.ketan]

@mattlowry
Here attached wifi patch for t889v device, kindly test and report.
Extract and flash with Odin for PDA tab

 

[dvn2008]

Hi,

After flashed the wifi patch, in download mode I don't see "warranty bit:0" anymore.
Does it mean Knox is gone from my phone?