How To Guide OTA and Non-OTA Firmware for S22 Ultra SM-S908U and S22 Ultra SM-S908U1 Versions

Search This thread
Where would that be located? Under SIM card it's just a "button" that's on. Doesn't say anything about calls or messages.
Yeah, that's how it looks here too. Was wondering if those needed to be appearing below like it used to or something. Probably something forgotten in the modem settings in the firmware.
  • Like
Reactions: zoman7663
Are you on TMO firmware? That update (AVE4) is broken as far as that goes. I got it to work momentarily by removing the SIM Card and playing around with it, but ultimately it went back to "verifying". I downgraded back to AVDC (U1) then the AVE4 dropped for U1. Been fine since reverting back to U1 firmware.
on U1 AVE4, chat features shows connected with TMobile eSim. So seems to be an issues with only Carrier based firmware.
  • Like
Reactions: zoman7663


Jul 11, 2016
If you switch to an esim it will connect and stay connected on TMO.When I was temporarily on the Google server by using the SIM card method. I had Rcs again with contacts I don't have on the T-Mobile server.
After I was moved back to the tmo server, I lost Rcs with them again. They are on the Google server, so the tmo server isn't configured correctly.
Last edited:
  • Like
Reactions: wgs1028


Recognized Contributor
This is basically my first Unlocked Firmware i flashed on my Second AT&T S22 Ultra 5G so far so good i dirty flashed no data wipe from U- S908USQU2AVE4 to U1- S908U1UEU2AVE4 So far so good no issues at all.


  • Screenshot_20220526-180121_Settings.jpg
    1.8 MB · Views: 68
literally having to request the QR code or provisioning email on each wipe you want to do lol unless you do regular update and it doesn't affect the data,

I guess dirty flashing will not affect ESIM, but full device wipe (clean flash) will surely remove the esim provisioning. (I had that on my first flash)
So running stock it wouldn't be much of a hassle?

Top Liked Posts

  • There are no posts matching your filters.
  • 7
    Well hello gents. Got a S22U yesterday 😬

    SM-S908U1UEU2AVF7 Unlocked July Patch 2022​

    I really have seen no difference, but I also was doing fine on the previous version.
    Alright, I'm bored with AVF7 and it's complete lack of problems. Where is the August update and UI5?
  • 16

    See Post #2 and #3 for the Links to the Firmware

    All of the firmware posted here can be flashed on any U or U1 Device. Each of the firmware's are NOT carrier dependent and only has carrier labels listed in order to have an idea if you might get OTA when you flash it.

    The firmware packages house each of the carrier's information, features, bloat, splash screens etc. (That's why they roll in at over 7Gb). When you flash a firmware the installation package reads your SIM, determines what carrier you're using and then installs the "package" that's designed for your carrier​

    S908USQU1AVA7 (Totally fake Firmware. I just made it up for example purposes)
    S=Galaxy S
    908U or F etc, the model of device
    SQ, FX etc = CPU and model specific
    U,S,E = Update, Security, Engineering, respectively
    1,2,3,4,5 etc = bootloader revision (This is important! You cannot go to a previous revision)
    A, B, C etc = Android version
    U, V = Year (U=2021, V=2022 etc)
    A,B,C etc = month (January A - December L)
    1 - 9 and then A - Z =build compilation. This basically means how many builds there are in a month. They start at 1 and go to Z
    So S908USQU1DVAM would be
    S908U (S22 Ultra Carrier version), SQ (Snapdragon), U (Update), 1 (Bootloader version), A (Build 12), V (2022), A (January), 7 (7th build)

    BL- Boot Loader
    AP - Application Processor (also termed PDA), this is the system partitions, recovery etc,
    CP - This is the Modem
    CSC - Consumer Software Customization. This is all of the stuff that contains the different carrier features, wi-fi calling, APN stuff like that. You'll notice that this file is getting as big(If not bigger) than the AP file with the system information.
    HOME_CSC - This is still the "Same" as the CSC, except it retains the CSC information that is flashed on the device. It wont wipe your device like the normal CSC will. This is part of the package in the OTA that doesn't wipe your phone
    USERDATA - Carrier files, this "Brands" the device to your carrier

    How to enter Download Mode:

    Turn off the device.​
    Connect USB cable to your PC (Leave it disconnected from the phone)​
    Press and hold down the Volume Up and Volume Down buttons. While they are still pressed, plug in the USB cable into your phone.​
    The phone will go into download mode press volume up. In Odin you will see that phone is added.​

    A decent writeup on how to use Odin:

    ***You MUST use one of the Patched versions of Odin in post #2 or #3 when flashing***

    Dirty Flash:

    I would only do this if you are having to manually update to the newer firmware and would not do it if you are coming/going to U/U1 or from beta firmware or if you are on an old firmware. I'd also highly recommend doing a back up prior to the doing this​
    Load these into Odin​

    Do NOT flash CSC or USERDATA (If it's in the download package), either of these WILL wipe your device.​
    This is a "dirty flash" and these can sometimes cause issues. Keep in mind if things start going sideways and stuff starts not working right, your first step to a solution will be to wipe the device.​
    S908U - Carrier Versions
    Bootloader 2 - If you are on a Bootloader 2 firmware you can NOT go back to a Bootloader 1 firmware, there is NO workaround. See Post 1 to determine which bootloader you're on
    S908USQU2AVE4 - ATT/CHA/CCT/TMB/VZW thanks to @Venom0642 for the link​
    S908USQS2AVDC - ATT/TMB thanks for the link @hyelton
    Bootloader 1
    S908USQU1AVA6 - ATT/CCT/CHA/TMB/USC/VZW - Thanks to @hyelton for the Mirror
    Odin3_v3.13.3b Patched: HERE
    Odin3_v3.14.4 Patched: HERE

    S908U1 - Unlocked Versions

    Bootloader 2 - If you are on a Bootloader 2 firmware you can NOT go back to a Bootloader 1 firmware, there is NO workaround. See Post 1 to determine which bootloader you're on
    13/OneUI 5.0 BETA - S908U1UEU2ZVH4 (AFH) and a MIRROR (Faster) Thanks @lexcyn
    You MUST be on S908U1UEU2AVF7 in order to update to this beta.​
    This is BL 2 so you can go back to stock, but if you do it's HIGHLY recommended to not dirty flash (It might not let you so be prepared to wipe)​
    Bootloader 1
    S908U1UEU1AVA6 - Thanks to 66880]@southern87 for the MIRROR
    Odin3_v3.13.3b Patched: HERE
    Odin3_v3.14.4 Patched: HERE
    I sense trolling lol. All needed info has been posted on this thread except new releases. People get too emotional over technicalities. Recommended thread lock except new releases.
    I would never support locking the thread, it's how everyone learns and has some fun too
    How do i know which firmware to download? Im a complete beginner... i have an att locked (making payments) 22 ultra sm-s908U. I was told to get the u1 firmware because its unlocked and i can use rcs thru jibe not att, but i also was told i need to get the firmware that matches the model number which is U. I may be overthinking, but it's confusing. And all the U options are labeled by carrier, there doesn't seem to be an unlocked firmware for my U phone. And if i were to get an U1 firmware, there are a few options with no explanation on the differences and which to get. Don't get me started on the advice to look for XAA firmware, because i don't see that anywhere lol. Apologies if this seems ridiculous, i just don't want to brick my phone
    There's VERY little chance you'll brick (The only way that I know you can is pulling the USB cable when flashing), that aside, it'll just error before the flash could happen.
    That being said, If you have a S908U or S908U1 device you can flash ANY of the firmware on this post. The firmware is not Carrier agnostic, the only reason there are carrier tags next to the posted firmware is to let people if they flash a specific one whether or not that is the current stock one and will get OTA in future releases.
    Most of that info is in the OP (I think.......), and if you're not too familiar with the process, I highly advise taking the time to read thru the pages, almost everything you'll need to know has been posted.
    If you can't find something ask, most everyone is super helpful