How To Guide OTA and Non-OTA Firmware for S22 Ultra SM-S908U and S22 Ultra SM-S908U1 Versions

Search This thread

vvrrare

Member
Aug 7, 2022
15
0
i flashed my s908u ver. to s908u1, and i have yet to receive the august update here in the US. is this normal or did i do something wrong?
 

smidge710

Member
Jun 24, 2013
14
1
Hoping someone can help me out. Im trying to flash my s22 ultra from verizon with the stock samsung firmware. Odin says the flash was successful and finished but i keep getting an error which says
"ANDROID RECOVERY samsung/b0qsqw/b0q12/sp1a.210812.16/S908usqu2avg6 user/release keys Can't load android system. your data may be corrupt. if you continue to get this message, you may need to perform a factory data reset and erase all user data stored on this device"

#Reboot Recovery cause is [init:1] #
#reason is [fs_mgr_mount_all:]#
supported API: 3

I tried both of the patched versions of ODIN in the 2nd post. and tried two different file sets. One was from samfw.com and one from FRIJA.

Any idea of what may be going wrong?
 

butchieboy

Senior Member
Feb 15, 2012
9,491
5,363
springfield.il
Beta pretty good so far.
Screenshot_20220806_235659_Nova7.jpg
 
  • Like
Reactions: kangi26

bassman418

Senior Member
Sep 28, 2011
290
67
I just downloaded the patch. The build info is showing S908U1UEU2AVF7 as the "current/source version", so I'd say that you MUST be on this build.

Added a link to the OP and some base instructions.
Thank you. Because im coming from a Verizon U, I'll need to covert to U1 Before i can flash. Wanted to besure it was a bootloader 2 version so i knew it was doable. Ive done it before on my Note 20 ultra, or Note 10+. Can't remember
 

bassman418

Senior Member
Sep 28, 2011
290
67
Remind

S908U1 - Unlocked Versions

Bootloader 2 - If you are on a Bootloader 2 firmware you can NOT go back to a Bootloader 1 firmware, there is NO workaround. See Post 1 to determine which bootloader you're on
13/OneUI 5.0 BETA - S908U1UEU2ZVH4 (AFH) and a MIRROR (Faster) Thanks @lexcyn
You MUST be on S908U1UEU2AVF7 in order to update to this beta. Do not extract the file leave it as a .bin. Open one of the Odin's posted here, and set it in the AP slot and flash.​
This is BL 2 so you can go back to stock, but if you do it's HIGHLY recommended to not dirty flash (It might not let you so be prepared to wipe)​
Bootloader 1
S908U1UEU1AVA6 - Thanks to 66880]@southern87 for the MIRROR
Odin3_v3.13.3b Patched: HERE
Odin3_v3.14.4 Patched: HERE
I have a question. When I'm in Odin, it wont let me see the .Bin file to select putting it in AP. Am i Doing something wrong? Can it rename it a .zip file and update in bootloader?
 
Do you think this method will work to install the Beta download link?

I have a microsd card and an adapter that connects straight to my phone and can read it, without a PC. Can't I power off, go into bootloader mode, and install from SD card?

ADB isn't an option because I don't have access to a PC right now. And the Alliance Shield method isn't working.

S22 Ultra AT&T locked U firmware, AVG6.

Edit: nvm just tried it, didn't work. Phone couldn't recognize SD card through adapter in recovery mode.
 

Attachments

  • Screenshot_20220807-092408_Samsung Internet.jpg
    Screenshot_20220807-092408_Samsung Internet.jpg
    697.5 KB · Views: 54
Last edited:
  • Like
Reactions: kangi26

Top Liked Posts

  • 1
    Venom, have you gotten October for carrier locked? Haven't seen anything.
    Not sure i am running unlocked Firmware on my AT&T S22 Ultra 5G Snapdragon 512GB
  • 10
    AT&T October Patch OTA rolling out now
    4
    Just here to shout out to all my fellas here. Butchie, Kangi, Venom, Jobudden ..and everyone I interacted with here ( sorry if I specifically missed your name). Hope you guys are doing well ... I haven't been on forums lately but I am around... Best wishes to all you guys..
    3
    Just here to shout out to all my fellas here.

    Butchie, Kangi, Venom, Jobudden ..and everyone I interacted with here ( sorry if I specifically missed your name). Hope you guys are doing well ... I haven't been on forums lately but I am around... Best wishes to all you guys..
    Same to you too @warriorvibhu
    Been a really odd year this year. Hope you're well
    3
    I am hoping the beta 3 does not screw with my battery life. I have not had good battery life since I got this phone. 10 to 12 hrs battery life with 2 to 3hrs of screen on time. With the same apps on beta 2 I get over 20hrs with 4 to 5 hrs screen on time.
    3
    I'm still here well kinda of , considering that I'm working 80hrs a week with no days off for the last 9 months lol 😆
  • 19

    See Post #2 and #3 for the Links to the Firmware

    All of the firmware posted here can be flashed on any U or U1 Device. Each of the firmware's are NOT carrier dependent and only has carrier labels listed in order to have an idea if you might get OTA when you flash it.

    The firmware packages house each of the carrier's information, features, bloat, splash screens etc. (That's why they roll in at over 7Gb). When you flash a firmware the installation package reads your SIM, determines what carrier you're using and then installs the "package" that's designed for your carrier​


    S908USQU1AVA7 (Totally fake Firmware. I just made it up for example purposes)
    S=Galaxy S
    908U or F etc, the model of device
    SQ, FX etc = CPU and model specific
    U,S,E = Update, Security, Engineering, respectively
    1,2,3,4,5 etc = bootloader revision (This is important! You cannot go to a previous revision)
    A, B, C etc = Android version
    U, V = Year (U=2021, V=2022 etc)
    A,B,C etc = month (January A - December L)
    1 - 9 and then A - Z =build compilation. This basically means how many builds there are in a month. They start at 1 and go to Z
    So S908USQU1DVAM would be
    S908-U-SQ-U-1-A-V-A-7
    S908U (S22 Ultra Carrier version), SQ (Snapdragon), U (Update), 1 (Bootloader version), A (Build 12), V (2022), A (January), 7 (7th build)

    BL- Boot Loader
    AP - Application Processor (also termed PDA), this is the system partitions, recovery etc,
    CP - This is the Modem
    CSC - Consumer Software Customization. This is all of the stuff that contains the different carrier features, wi-fi calling, APN stuff like that. You'll notice that this file is getting as big(If not bigger) than the AP file with the system information.
    HOME_CSC - This is still the "Same" as the CSC, except it retains the CSC information that is flashed on the device. It wont wipe your device like the normal CSC will. This is part of the package in the OTA that doesn't wipe your phone
    USERDATA - Carrier files, this "Brands" the device to your carrier

    How to enter Download Mode:

    Turn off the device.​
    Connect USB cable to your PC (Leave it disconnected from the phone)​
    Press and hold down the Volume Up and Volume Down buttons. While they are still pressed, plug in the USB cable into your phone.​
    The phone will go into download mode press volume up. In Odin you will see that phone is added.​

    A decent writeup on how to use Odin:

    ***You MUST use one of the Patched versions of Odin in post #2 or #3 when flashing***


    Dirty Flash:

    I would only do this if you are having to manually update to the newer firmware and would not do it if you are coming/going to U/U1 or from beta firmware or if you are on an old firmware. I'd also highly recommend doing a back up prior to the doing this​
    Load these into Odin​
    BL​
    AP​
    CP​
    HOME_CSC​

    Do NOT flash CSC or USERDATA (If it's in the download package), either of these WILL wipe your device.​
    This is a "dirty flash" and these can sometimes cause issues. Keep in mind if things start going sideways and stuff starts not working right, your first step to a solution will be to wipe the device.​
    13

    S908U1 - Unlocked Versions

    Bootloader 2 - If you are on a Bootloader 2 firmware you can NOT go back to a Bootloader 1 firmware, there is NO workaround. See Post 1 to determine which bootloader you're on
    13/OneUI 5.0 BETA -​
    BETA1 S908U1UEU2ZVH4 (AFH) and a MIRROR (Faster) Thanks @lexcyn
    You MUST be on S908U1UEU2AVF7 in order to update to this beta.​
    This is BL 2 so you can go back to stock, but if you do it's HIGHLY recommended to not dirty flash (It might not let you so be prepared to wipe)​
    BETA1>BETA2 - S908U1UEU2ZVHK Thanks for the file @Venom0642
    You MUST be on S908U1UEU2ZVH4 in order to update to Beta 2 (ZVHK)​
    Bootloader 1
    S908U1UEU1AVA6 - Thanks to 66880]@southern87 for the MIRROR
    Odin3_v3.13.3b Patched: HERE
    Odin3_v3.14.4 Patched: HERE
    12
    S908U - Carrier Versions
    Bootloader 2 - If you are on a Bootloader 2 firmware you can NOT go back to a Bootloader 1 firmware, there is NO workaround. See Post 1 to determine which bootloader you're on
    S908USQU2AVE4 - ATT/CHA/CCT/TMB/VZW thanks to @Venom0642 for the link​
    S908USQS2AVDC - ATT/TMB thanks for the link @hyelton
    Bootloader 1
    S908USQU1AVCJ - ATT/CCT/CHA/VZW​
    S908USQU1AVC8 - ATT/CCT/CHA/TMB/VZW​
    S908USQU1AVA6 - ATT/CCT/CHA/TMB/USC/VZW - Thanks to @hyelton for the Mirror
    Odin3_v3.13.3b Patched: HERE
    Odin3_v3.14.4 Patched: HERE
    10
    AT&T October Patch OTA rolling out now
    7
    How do i know which firmware to download? Im a complete beginner... i have an att locked (making payments) 22 ultra sm-s908U. I was told to get the u1 firmware because its unlocked and i can use rcs thru jibe not att, but i also was told i need to get the firmware that matches the model number which is U. I may be overthinking, but it's confusing. And all the U options are labeled by carrier, there doesn't seem to be an unlocked firmware for my U phone. And if i were to get an U1 firmware, there are a few options with no explanation on the differences and which to get. Don't get me started on the advice to look for XAA firmware, because i don't see that anywhere lol. Apologies if this seems ridiculous, i just don't want to brick my phone
    There's VERY little chance you'll brick (The only way that I know you can is pulling the USB cable when flashing), that aside, it'll just error before the flash could happen.
    That being said, If you have a S908U or S908U1 device you can flash ANY of the firmware on this post. The firmware is not Carrier agnostic, the only reason there are carrier tags next to the posted firmware is to let people if they flash a specific one whether or not that is the current stock one and will get OTA in future releases.
    Most of that info is in the OP (I think.......), and if you're not too familiar with the process, I highly advise taking the time to read thru the pages, almost everything you'll need to know has been posted.
    If you can't find something ask, most everyone is super helpful