[OTA] Official Marshmallow build MCG24.251-5

TheSt33v

Senior Member
Jun 12, 2014
1,741
1,362
0
The Stupid Country
WARNING: THIS HAS BRICKED PHONES! It is suspected that having an encrypted phone causes these bricks, but that has not been confirmed. If your data partition is encrypted, it is extra important that you perform a factory reset before taking this OTA. Doing this will remove the encryption.

WARNING: INSTALLING THIS ON A LOCKED BOOTLOADER WILL ELIMINATE ALL CHANCE OF YOU EVER UNLOCKING YOUR BOOTLOADER.

If your bootloader is unlocked, it will not be re-locked after this update.

Do NOT flash this using TWRP. If you want to do that, use this version: http://forum.xda-developers.com/droid-turbo/development/rom-mcg24-251-5-100-stock-t3512949

So if you're a bad enough dude to flash this anyway, follow these instructions:

1. Backup all data on your phone. It will be lost.
2. If your bootloader is locked, make sure you are on SU4TL-49. If you aren't, take all available OTAs until you are.
3. If your bootloader is unlocked and you have TWRP installed, flash SU4TL-49 using this package: https://mega.nz/#!3xRhiaSR!KxH2Ya_BYK4zBjrxmej7dqaaDJVT1coTFJVJ5Fvb2WM
4. If you have TWRP installed on your phone, download the stock SU4TL-49 recovery here: https://mega.nz/#!L1AkQD4T!qoZIlLa-wuUBLMEi_gE574meiHd6Pehb34a-x3Gb-V8 and install it using the install image option in the install menu in TWRP. Reboot to recovery.
3. Perform a factory reset using the stock recovery menu. This will wipe all data and ensure that everything is formatted exactly as it should be.
4. Boot the phone normally and place the marshmallow update on the root of the directory that pops up when you plug in your phone.
5. Boot to recovery and at the stock recovery menu, select "apply update from sdcard."
6. Select the update and cross your fingers.

Get the update here: https://mega.nz/#!v0pRwThS!Pz9xuOSPjiOMtjlORkFrZ_ok0GTKqCfGzi5KmbDpHQ8
 
Last edited:

johnjingle

Senior Member
Jun 25, 2010
328
86
28
Thank you, now we can see what can be done with the new modem, kernel, etc...

Looking forward to a plethora of improvements to our phones :)
 

TheSt33v

Senior Member
Jun 12, 2014
1,741
1,362
0
The Stupid Country
Thanks for the info and the download! You finally brought the wall down. I'm waiting for the twrp version myself
:).
I'm testing the TWRP version now. It should be up shortly.

EDIT: I flashed it and it seems to work fine. Uploading now. Should be up in a few hours. I'll check on it after I go run some errands real quick.
 
Last edited:

kitcostantino

Senior Member
Mar 21, 2011
1,695
1,000
143
Mayberry
Despite having software status report official, not modified, I too got a status 7 error. Downloading again. ;)

---------- Post added at 09:52 PM ---------- Previous post was at 09:51 PM ----------

Are you sure that that file is the right one? It has the same version number as su4tl-49.
This used to always be Motorola's naming scheme. New updates were named after the firmware version they replaced.
 

TheSt33v

Senior Member
Jun 12, 2014
1,741
1,362
0
The Stupid Country
Despite having software status report official, not modified, I too got a status 7 error. Downloading again. ;)

---------- Post added at 09:52 PM ---------- Previous post was at 09:51 PM ----------



This used to always be Motorola's naming scheme. New updates were named after the firmware version they replaced.
Error 7? Are you trying to flash this in TWRP? Because you can't do that with this package. You need the stock recovery. I'm uploading a TWRP-friendly version now, but the internet is being slow today.
 
  • Like
Reactions: ChazzMatt

s5610

Senior Member
Sep 13, 2014
716
305
0
Chişinău
Installed successfully on two devices.

...

kitcostantino, did you refresh system, kernel, modem and recovery by SU4TL-49? Are you sure you didn't mess with Turbo Maxx ROMs in the past? Foreign bootloader can cause even brick, not just error. See bootloader status at fastboot mode should be " locked, status 0"
 

kitcostantino

Senior Member
Mar 21, 2011
1,695
1,000
143
Mayberry
Installed successfully on two devices.

...

kitcostantino, did you refresh system, kernel, modem and recovery by SU4TL-49? Are you sure you didn't mess with Turbo Maxx ROMs in the past? Foreign bootloader can cause even brick, not just error. See bootloader status at fastboot mode should be " locked, status 0"
lol. lawd, No. Ive been rocking status 3 for over a year.

As a tip, if anyone else with an unlocked bootloader runs into this,
what i had to do was restore my su-44 unmodified backup, OTA to SU-49, and then, after confirming my
q/e status was 0/1 i was able to update via the file in my Mega download folder. all is well now. :) they even added the newer version of command center. sweet. thank you all!!
 

kitcostantino

Senior Member
Mar 21, 2011
1,695
1,000
143
Mayberry
It works in LOCKED BOOTLOADER??? .-.
Um, I couldn't tell you.i be been unlocked since the day Sunshine could unlocked our bootloader's. What I can tell you is you should absolutely unlock that via Sunshine before you even dream of applying this update. There will never be another opportunity.
Just my
.02. This is likely the last update for this phone, and your only chance of seeing N is via custom Roms.